Merge branch 'next/topic-plat-samsung-1' into next-samsung-cleanup

arch/arm/mach-s3c2410/include/mach/map.h

@@ -14,9 +14,53 @@
 #define __ASM_ARCH_MAP_H
 
 #include <plat/map-base.h>
-#include <plat/map.h>
 
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
+/*
+ * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET		(0x4000)
+
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ		(0x4A000000)
+#define S3C24XX_SZ_IRQ		SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL	(0x48000000)
+#define S3C24XX_SZ_MEMCTRL	SZ_1M
+
+/* UARTs */
+#define S3C_VA_UARTx(uart)	(S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
+/* Timers */
+#define S3C2410_PA_TIMER	(0x51000000)
+#define S3C24XX_SZ_TIMER	SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR	SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV	(0x52000000)
+#define S3C24XX_SZ_USBDEV	SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG	(0x53000000)
+#define S3C24XX_SZ_WATCHDOG	SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART		SZ_1M
+#define S3C24XX_SZ_IIS		SZ_1M
+#define S3C24XX_SZ_ADC		SZ_1M
+#define S3C24XX_SZ_SPI		SZ_1M
+#define S3C24XX_SZ_SDI		SZ_1M
+#define S3C24XX_SZ_NAND		SZ_1M
+#define S3C24XX_SZ_GPIO		SZ_1M
 
 /* USB host controller */
 #define S3C2410_PA_USBHOST (0x49000000)
@@ -75,10 +119,8 @@
 
 /* S3C2412 memory and IO controls */
 #define S3C2412_PA_SSMC	(0x4F000000)
-#define S3C2412_VA_SSMC	S3C_ADDR_CPU(0x00000000)
 
 #define S3C2412_PA_EBI	(0x48800000)
-#define S3C2412_VA_EBI	S3C_ADDR_CPU(0x00010000)
 
 /* physical addresses of all the chip-select areas */
 
@@ -100,12 +142,10 @@
 #define S3C24XX_PA_DMA      S3C2410_PA_DMA
 #define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
 #define S3C24XX_PA_LCD      S3C2410_PA_LCD
-#define S3C24XX_PA_UART     S3C2410_PA_UART
 #define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
 #define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
 #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
 #define S3C24XX_PA_IIS      S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI

arch/arm/mach-s3c64xx/include/mach/map.h

@@ -16,6 +16,7 @@
 #define __ASM_ARCH_MAP_H __FILE__
 
 #include <plat/map-base.h>
+#include <plat/map-s3c.h>
 
 /*
  * Post-mux Chip Select Regions Xm0CSn_
@@ -83,7 +84,6 @@
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
@@ -94,16 +94,10 @@
 #define S3C64XX_PA_VIC1		(0x71300000)
 
 #define S3C64XX_PA_MODEM	(0x74108000)
-#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
 #define S3C64XX_PA_USB_HSPHY	(0x7C100000)
-#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define VA_VIC0			(S3C_VA_IRQ + 0x00)
-#define VA_VIC1			(S3C_VA_IRQ + 0x10000)
 
 /* compatibiltiy defines. */
 #define S3C_PA_TIMER		S3C64XX_PA_TIMER
@@ -119,7 +113,6 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 #define S3C_PA_RTC		S3C64XX_PA_RTC
 #define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
 

arch/arm/plat-s3c24xx/include/plat/map.h → arch/arm/plat-samsung/include/plat/map-s3c.h

-/* linux/include/asm-arm/plat-s3c24xx/map.h
+/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
  *
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -10,58 +10,31 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_S3C24XX_MAP_H
-#define __ASM_PLAT_S3C24XX_MAP_H
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
 
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
 #define S3C24XX_VA_IRQ		S3C_VA_IRQ
-#define S3C2410_PA_IRQ	   (0x4A000000)
-#define S3C24XX_SZ_IRQ	   SZ_1M
-
-/* memory controller registers */
 #define S3C24XX_VA_MEMCTRL	S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* UARTs */
 #define S3C24XX_VA_UART		S3C_VA_UART
-#define S3C2410_PA_UART	   (0x50000000)
-#define S3C24XX_SZ_UART	   SZ_1M
-#define S3C_UART_OFFSET	   (0x4000)
 
-#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
-/* Timers */
 #define S3C24XX_VA_TIMER	S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* Clock and Power management */
 #define S3C24XX_VA_CLKPWR	S3C_VA_SYS
-#define S3C24XX_SZ_CLKPWR  SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
 #define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
 
-/* Standard size definitions for peripheral blocks. */
+#define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00010000)
 
-#define S3C24XX_SZ_IIS		SZ_1M
-#define S3C24XX_SZ_ADC		SZ_1M
-#define S3C24XX_SZ_SPI		SZ_1M
-#define S3C24XX_SZ_SDI		SZ_1M
-#define S3C24XX_SZ_NAND		SZ_1M
+#define S3C2410_PA_UART		(0x50000000)
+#define S3C24XX_PA_UART		S3C2410_PA_UART
 
-/* GPIO ports */
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET		(0x400)
+#endif
 
-/* the calculation for the VA of this must ensure that
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
  * it is the same distance apart from the UART in the
  * phsyical address space, as the initial mapping for the IO
  * is done as a 1:1 mapping. This puts it (currently) at
@@ -70,14 +43,23 @@
 */
 
 #define S3C2410_PA_GPIO		(0x56000000)
+#define S3C24XX_PA_GPIO		S3C2410_PA_GPIO
+
 #define S3C24XX_VA_GPIO		((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO	   SZ_1M
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
 
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA.
  */
 
+#define S3C2410_ADDR(x)		S3C_ADDR(x)
+
 #define S3C24XX_VA_ISA_WORD	S3C2410_ADDR(0x02000000)
 #define S3C24XX_VA_ISA_BYTE	S3C2410_ADDR(0x03000000)
 
@@ -97,4 +79,6 @@ extern void __iomem *s3c24xx_va_gpio2;
 #define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
 #endif
 
-#endif /* __ASM_PLAT_S3C24XX_MAP_H */
+#include <plat/map-s5p.h>
+
+#endif /* __ASM_PLAT_MAP_S3C_H */

arch/arm/plat-s5p/include/plat/map-s5p.h → arch/arm/plat-samsung/include/plat/map-s5p.h

-/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
@@ -40,8 +40,6 @@
 #define S5P_VA_GIC_CPU		S3C_ADDR(0x02810000)
 #define S5P_VA_GIC_DIST		S3C_ADDR(0x02820000)
 
-#define S3C_VA_USB_HSPHY	S3C_ADDR(0x02900000)
-
 #define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
 #define VA_VIC0			VA_VIC(0)
 #define VA_VIC1			VA_VIC(1)
@@ -58,4 +56,6 @@
 #define S3C_UART_OFFSET		(0x400)
 #endif
 
+#include <plat/map-s3c.h>
+
 #endif /* __ASM_PLAT_MAP_S5P_H */