Commit 4c8e84b2 authored by Freddy Xin's avatar Freddy Xin Committed by David S. Miller

ax88179_178a: Remove AX_MEDIUM_ALWAYS_ONE bit in AX_MEDIUM_STATUS_MODE...

ax88179_178a: Remove AX_MEDIUM_ALWAYS_ONE bit in AX_MEDIUM_STATUS_MODE register to avoid TX throttling

Remove AX_MEDIUM_ALWAYS_ONE in AX_MEDIUM_STATUS_MODE register.
Setting this bit may cause TX throttling in Half-Duplex mode.
Signed-off-by: default avatarFreddy Xin <freddy@asix.com.tw>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e3bc10bd
......@@ -78,7 +78,6 @@
#define AX_MEDIUM_STATUS_MODE 0x22
#define AX_MEDIUM_GIGAMODE 0x01
#define AX_MEDIUM_FULL_DUPLEX 0x02
#define AX_MEDIUM_ALWAYS_ONE 0x04
#define AX_MEDIUM_EN_125MHZ 0x08
#define AX_MEDIUM_RXFLOW_CTRLEN 0x10
#define AX_MEDIUM_TXFLOW_CTRLEN 0x20
......@@ -1065,8 +1064,8 @@ static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
/* Configure default medium type => giga */
*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
AX_MEDIUM_GIGAMODE;
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
2, 2, tmp16);
......@@ -1225,7 +1224,7 @@ static int ax88179_link_reset(struct usbnet *dev)
}
mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE;
AX_MEDIUM_RXFLOW_CTRLEN;
ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
1, 1, &link_sts);
......@@ -1339,8 +1338,8 @@ static int ax88179_reset(struct usbnet *dev)
/* Configure default medium type => giga */
*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
AX_MEDIUM_GIGAMODE;
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
2, 2, tmp16);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment