Skip to content

L
linux
Commit 4ca8af57 authored by Paul Bolle's avatar Paul Bolle Committed by Mark Brown
Browse files
Options

ASoC: drop support for PlayPaq with WM8510 

SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca968
("[ALSA] Revised AT32 ASoC Patch"). That support depends on
BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got
added in v2.6.27. It still doesn't. It has never been possible to even
build this driver. Drop it.
Signed-off-by: default avatarPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 380c8830
Hide whitespace changes
Inline Side-by-side
Showing with 1 addition and 497 deletions
sound/soc/atmel/Kconfig
View file @ 4ca8af57
config SND_ATMEL_SOC
tristate "SoC Audio for the Atmel System-on-Chip"
depends on ARCH_AT91 || AVR32
depends on ARCH_AT91
help
Say Y or M if you want to add support for codecs attached to
the ATMEL SSC interface. You will also need
......@@ -24,25 +24,6 @@ config SND_AT91_SOC_SAM9G20_WM8731
Say Y if you want to add support for SoC audio on WM8731-based
AT91sam9g20 evaluation board.
config SND_AT32_SOC_PLAYPAQ
tristate "SoC Audio support for PlayPaq with WM8510"
depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS
select SND_ATMEL_SOC_SSC
select SND_SOC_WM8510
help
Say Y or M here if you want to add support for SoC audio
on the LRS PlayPaq.
config SND_AT32_SOC_PLAYPAQ_SLAVE
bool "Run CODEC on PlayPaq in slave mode"
depends on SND_AT32_SOC_PLAYPAQ
default n
help
Say Y if you want to run with the AT32 SSC generating the BCLK
and FRAME signals on the PlayPaq. Unless you want to play
with the AT32 as the SSC master, you probably want to say N here,
as this will give you better sound quality.
config SND_AT91_SOC_AFEB9260
tristate "SoC Audio support for AFEB9260 board"
depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
......
sound/soc/atmel/Makefile
View file @ 4ca8af57
......@@ -8,9 +8,5 @@ obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
# AT91 Machine Support
snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
# AT32 Machine Support
snd-soc-playpaq-objs := playpaq_wm8510.o
obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o
sound/soc/atmel/playpaq_wm8510.c deleted 100644 → 0
View file @ 380c8830
/* sound/soc/at32/playpaq_wm8510.c
* ASoC machine driver for PlayPaq using WM8510 codec
*
* Copyright (C) 2008 Long Range Systems
* Geoffrey Wossum <gwossum@acm.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c
*
* NOTE: If you don't have the AT32 enhanced portmux configured (which
* isn't currently in the mainline or Atmel patched kernel), you will
* need to set the MCLK pin (PA30) to peripheral A in your board initialization
* code. Something like:
* at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
*
*/
/* #define DEBUG */
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <mach/at32ap700x.h>
#include <mach/portmux.h>
#include "../codecs/wm8510.h"
#include "atmel-pcm.h"
#include "atmel_ssc_dai.h"
/*-------------------------------------------------------------------------*\
* constants
\*-------------------------------------------------------------------------*/
#define MCLK_PIN GPIO_PIN_PA(30)
#define MCLK_PERIPH GPIO_PERIPH_A
/*-------------------------------------------------------------------------*\
* data types
\*-------------------------------------------------------------------------*/
/* SSC clocking data */
struct ssc_clock_data {
/* CMR div */
unsigned int cmr_div;
/* Frame period (as needed by xCMR.PERIOD) */
unsigned int period;
/* The SSC clock rate these settings where calculated for */
unsigned long ssc_rate;
};
/*-------------------------------------------------------------------------*\
* module data
\*-------------------------------------------------------------------------*/
static struct clk *_gclk0;
static struct clk *_pll0;
#define CODEC_CLK (_gclk0)
/*-------------------------------------------------------------------------*\
* Sound SOC operations
\*-------------------------------------------------------------------------*/
#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock(
struct snd_pcm_hw_params *params,
struct snd_soc_dai *cpu_dai)
{
struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai);
struct ssc_device *ssc = ssc_p->ssc;
struct ssc_clock_data cd;
unsigned int rate, width_bits, channels;
unsigned int bitrate, ssc_div;
unsigned actual_rate;
/*
* Figure out required bitrate
*/
rate = params_rate(params);
channels = params_channels(params);
width_bits = snd_pcm_format_physical_width(params_format(params));
bitrate = rate * width_bits * channels;
/*
* Figure out required SSC divider and period for required bitrate
*/
cd.ssc_rate = clk_get_rate(ssc->clk);
ssc_div = cd.ssc_rate / bitrate;
cd.cmr_div = ssc_div / 2;
if (ssc_div & 1) {
/* round cmr_div up */
cd.cmr_div++;
}
cd.period = width_bits - 1;
/*
* Find actual rate, compare to requested rate
*/
actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n",
rate, actual_rate);
return cd;
}
#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai);
struct ssc_device *ssc = ssc_p->ssc;
unsigned int pll_out = 0, bclk = 0, mclk_div = 0;
int ret;
/* Due to difficulties with getting the correct clocks from the AT32's
* PLL0, we're going to let the CODEC be in charge of all the clocks
*/
#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM);
#else
struct ssc_clock_data cd;
const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS);
#endif
if (ssc == NULL) {
pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n");
return -EINVAL;
}
/*
* Figure out PLL and BCLK dividers for WM8510
*/
switch (params_rate(params)) {
case 48000:
pll_out = 24576000;
mclk_div = WM8510_MCLKDIV_2;
bclk = WM8510_BCLKDIV_8;
break;
case 44100:
pll_out = 22579200;
mclk_div = WM8510_MCLKDIV_2;
bclk = WM8510_BCLKDIV_8;
break;
case 22050:
pll_out = 22579200;
mclk_div = WM8510_MCLKDIV_4;
bclk = WM8510_BCLKDIV_8;
break;
case 16000:
pll_out = 24576000;
mclk_div = WM8510_MCLKDIV_6;
bclk = WM8510_BCLKDIV_8;
break;
case 11025:
pll_out = 22579200;
mclk_div = WM8510_MCLKDIV_8;
bclk = WM8510_BCLKDIV_8;
break;
case 8000:
pll_out = 24576000;
mclk_div = WM8510_MCLKDIV_12;
bclk = WM8510_BCLKDIV_8;
break;
default:
pr_warning("playpaq_wm8510: Unsupported sample rate %d\n",
params_rate(params));
return -EINVAL;
}
/*
* set CPU and CODEC DAI configuration
*/
ret = snd_soc_dai_set_fmt(codec_dai, fmt);
if (ret < 0) {
pr_warning("playpaq_wm8510: "
"Failed to set CODEC DAI format (%d)\n",
ret);
return ret;
}
ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
if (ret < 0) {
pr_warning("playpaq_wm8510: "
"Failed to set CPU DAI format (%d)\n",
ret);
return ret;
}
/*
* Set CPU clock configuration
*/
#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai);
pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n",
cd.cmr_div, cd.period);
ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div);
if (ret < 0) {
pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n",
ret);
return ret;
}
ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD,
cd.period);
if (ret < 0) {
pr_warning("playpaq_wm8510: "
"Failed to set CPU transmit period (%d)\n",
ret);
return ret;
}
#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
/*
* Set CODEC clock configuration
*/
pr_debug("playpaq_wm8510: "
"pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n",
clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div);
#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk);
if (ret < 0) {
pr_warning
("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n",
ret);
return ret;
}
#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
ret = snd_soc_dai_set_pll(codec_dai, 0, 0,
clk_get_rate(CODEC_CLK), pll_out);
if (ret < 0) {
pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n",
ret);
return ret;
}
ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div);
if (ret < 0) {
pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n",
ret);
return ret;
}
return 0;
}
static struct snd_soc_ops playpaq_wm8510_ops = {
.hw_params = playpaq_wm8510_hw_params,
};
static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = {
SND_SOC_DAPM_MIC("Int Mic", NULL),
SND_SOC_DAPM_SPK("Ext Spk", NULL),
};
static const struct snd_soc_dapm_route intercon[] = {
/* speaker connected to SPKOUT */
{"Ext Spk", NULL, "SPKOUTP"},
{"Ext Spk", NULL, "SPKOUTN"},
{"Mic Bias", NULL, "Int Mic"},
{"MICN", NULL, "Mic Bias"},
{"MICP", NULL, "Mic Bias"},
};
static int playpaq_wm8510_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
int i;
/*
* Add DAPM widgets
*/
for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++)
snd_soc_dapm_new_control(dapm, &playpaq_dapm_widgets[i]);
/*
* Setup audio path interconnects
*/
snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
/* always connected pins */
snd_soc_dapm_enable_pin(dapm, "Int Mic");
snd_soc_dapm_enable_pin(dapm, "Ext Spk");
/* Make CSB show PLL rate */
snd_soc_dai_set_clkdiv(rtd->codec_dai, WM8510_OPCLKDIV,
WM8510_OPCLKDIV_1 | 4);
return 0;
}
static struct snd_soc_dai_link playpaq_wm8510_dai = {
.name = "WM8510",
.stream_name = "WM8510 PCM",
.cpu_dai_name= "atmel-ssc-dai.0",
.platform_name = "atmel-pcm-audio",
.codec_name = "wm8510-codec.0-0x1a",
.codec_dai_name = "wm8510-hifi",
.init = playpaq_wm8510_init,
.ops = &playpaq_wm8510_ops,
};
static struct snd_soc_card snd_soc_playpaq = {
.name = "LRS_PlayPaq_WM8510",
.dai_link = &playpaq_wm8510_dai,
.num_links = 1,
};
static struct platform_device *playpaq_snd_device;
static int __init playpaq_asoc_init(void)
{
int ret = 0;
/*
* Configure MCLK for WM8510
*/
_gclk0 = clk_get(NULL, "gclk0");
if (IS_ERR(_gclk0)) {
_gclk0 = NULL;
ret = PTR_ERR(_gclk0);
goto err_gclk0;
}
_pll0 = clk_get(NULL, "pll0");
if (IS_ERR(_pll0)) {
_pll0 = NULL;
ret = PTR_ERR(_pll0);
goto err_pll0;
}
ret = clk_set_parent(_gclk0, _pll0);
if (ret) {
pr_warning("snd-soc-playpaq: "
"Failed to set PLL0 as parent for DAC clock\n");
goto err_set_clk;
}
clk_set_rate(CODEC_CLK, 12000000);
clk_enable(CODEC_CLK);
#if defined CONFIG_AT32_ENHANCED_PORTMUX
at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0);
#endif
/*
* Create and register platform device
*/
playpaq_snd_device = platform_device_alloc("soc-audio", 0);
if (playpaq_snd_device == NULL) {
ret = -ENOMEM;
goto err_device_alloc;
}
platform_set_drvdata(playpaq_snd_device, &snd_soc_playpaq);
ret = platform_device_add(playpaq_snd_device);
if (ret) {
pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n",
ret);
goto err_device_add;
}
return 0;
err_device_add:
if (playpaq_snd_device != NULL) {
platform_device_put(playpaq_snd_device);
playpaq_snd_device = NULL;
}
err_device_alloc:
err_set_clk:
if (_pll0 != NULL) {
clk_put(_pll0);
_pll0 = NULL;
}
err_pll0:
if (_gclk0 != NULL) {
clk_put(_gclk0);
_gclk0 = NULL;
}
return ret;
}
static void __exit playpaq_asoc_exit(void)
{
if (_gclk0 != NULL) {
clk_put(_gclk0);
_gclk0 = NULL;
}
if (_pll0 != NULL) {
clk_put(_pll0);
_pll0 = NULL;
}
#if defined CONFIG_AT32_ENHANCED_PORTMUX
at32_free_pin(MCLK_PIN);
#endif
platform_device_unregister(playpaq_snd_device);
playpaq_snd_device = NULL;
}
module_init(playpaq_asoc_init);
module_exit(playpaq_asoc_exit);
MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>");
MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq");
MODULE_LICENSE("GPL");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7