Skip to content

L
linux
Commit 4e47556e authored by Takashi Iwai's avatar Takashi Iwai
Browse files
Options

ALSA: doc: ReSTize Audiophile-USB.txt 

Another simple conversion from a plain text file.
Put to cards directory.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 312c01b1
Show whitespace changes
Inline Side-by-side
Showing with 184 additions and 75 deletions
Documentation/sound/alsa/Audiophile-Usb.txt → Documentation/sound/cards/audiophile-usb.rst
View file @ 4e47556e
Guide to using M-Audio Audiophile USB with ALSA and Jack v1.5 ========================================================
======================================================== Guide to using M-Audio Audiophile USB with ALSA and Jack
========================================================
Thibault Le Meur <Thibault.LeMeur@supelec.fr> v1.5
Thibault Le Meur <Thibault.LeMeur@supelec.fr>
This document is a guide to using the M-Audio Audiophile USB (tm) device with This document is a guide to using the M-Audio Audiophile USB (tm) device with
ALSA and JACK. ALSA and JACK.
History History
======= =======
* v1.4 - Thibault Le Meur (2007-07-11) * v1.4 - Thibault Le Meur (2007-07-11)
- Added Low Endianness nature of 16bits-modes - Added Low Endianness nature of 16bits-modes
found by Hakan Lennestal <Hakan.Lennestal@brfsodrahamn.se> found by Hakan Lennestal <Hakan.Lennestal@brfsodrahamn.se>
- Modifying document structure - Modifying document structure
* v1.5 - Thibault Le Meur (2007-07-12) * v1.5 - Thibault Le Meur (2007-07-12)
- Added AC3/DTS passthru info - Added AC3/DTS passthru info
1 - Audiophile USB Specs and correct usage Audiophile USB Specs and correct usage
========================================== ======================================
This part is a reminder of important facts about the functions and limitations This part is a reminder of important facts about the functions and limitations
of the device. of the device.
The device has 4 audio interfaces, and 2 MIDI ports: The device has 4 audio interfaces, and 2 MIDI ports:
* Analog Stereo Input (Ai) * Analog Stereo Input (Ai)
- This port supports 2 pairs of line-level audio inputs (1/4" TS and RCA) - This port supports 2 pairs of line-level audio inputs (1/4" TS and RCA)
- When the 1/4" TS (jack) connectors are connected, the RCA connectors - When the 1/4" TS (jack) connectors are connected, the RCA connectors
are disabled are disabled
* Analog Stereo Output (Ao) * Analog Stereo Output (Ao)
* Digital Stereo Input (Di) * Digital Stereo Input (Di)
* Digital Stereo Output (Do) * Digital Stereo Output (Do)
...@@ -34,56 +43,69 @@ The device has 4 audio interfaces, and 2 MIDI ports: ...@@ -34,56 +43,69 @@ The device has 4 audio interfaces, and 2 MIDI ports:
* Midi Out (Mo) * Midi Out (Mo)
The internal DAC/ADC has the following characteristics: The internal DAC/ADC has the following characteristics:
* sample depth of 16 or 24 bits * sample depth of 16 or 24 bits
* sample rate from 8kHz to 96kHz * sample rate from 8kHz to 96kHz
* Two interfaces can't use different sample depths at the same time. * Two interfaces can't use different sample depths at the same time.
Moreover, the Audiophile USB documentation gives the following Warning: Moreover, the Audiophile USB documentation gives the following Warning:
"Please exit any audio application running before switching between bit depths" Please exit any audio application running before switching between bit depths
Due to the USB 1.1 bandwidth limitation, a limited number of interfaces can be Due to the USB 1.1 bandwidth limitation, a limited number of interfaces can be
activated at the same time depending on the audio mode selected: activated at the same time depending on the audio mode selected:
* 16-bit/48kHz ==> 4 channels in + 4 channels out * 16-bit/48kHz ==> 4 channels in + 4 channels out
- Ai+Ao+Di+Do - Ai+Ao+Di+Do
* 24-bit/48kHz ==> 4 channels in + 2 channels out, * 24-bit/48kHz ==> 4 channels in + 2 channels out,
or 2 channels in + 4 channels out or 2 channels in + 4 channels out
- Ai+Ao+Do or Ai+Di+Ao or Ai+Di+Do or Di+Ao+Do - Ai+Ao+Do or Ai+Di+Ao or Ai+Di+Do or Di+Ao+Do
* 24-bit/96kHz ==> 2 channels in _or_ 2 channels out (half duplex only) * 24-bit/96kHz ==> 2 channels in _or_ 2 channels out (half duplex only)
- Ai or Ao or Di or Do - Ai or Ao or Di or Do
Important facts about the Digital interface: Important facts about the Digital interface:
-------------------------------------------- --------------------------------------------
* The Do port additionally supports surround-encoded AC-3 and DTS passthrough, * The Do port additionally supports surround-encoded AC-3 and DTS passthrough,
though I haven't tested it under Linux though I haven't tested it under Linux
- Note that in this setup only the Do interface can be enabled - Note that in this setup only the Do interface can be enabled
* Apart from recording an audio digital stream, enabling the Di port is a way * Apart from recording an audio digital stream, enabling the Di port is a way
to synchronize the device to an external sample clock to synchronize the device to an external sample clock
- As a consequence, the Di port must be enable only if an active Digital - As a consequence, the Di port must be enable only if an active Digital
source is connected source is connected
- Enabling Di when no digital source is connected can result in a - Enabling Di when no digital source is connected can result in a
synchronization error (for instance sound played at an odd sample rate) synchronization error (for instance sound played at an odd sample rate)
2 - Audiophile USB MIDI support in ALSA Audiophile USB MIDI support in ALSA
======================================= ===================================
The Audiophile USB MIDI ports will be automatically supported once the The Audiophile USB MIDI ports will be automatically supported once the
following modules have been loaded: following modules have been loaded:
* snd-usb-audio * snd-usb-audio
* snd-seq-midi * snd-seq-midi
No additional setting is required. No additional setting is required.
3 - Audiophile USB Audio support in ALSA Audiophile USB Audio support in ALSA
======================================== ====================================
Audio functions of the Audiophile USB device are handled by the snd-usb-audio Audio functions of the Audiophile USB device are handled by the snd-usb-audio
module. This module can work in a default mode (without any device-specific module. This module can work in a default mode (without any device-specific
parameter), or in an "advanced" mode with the device-specific parameter called parameter), or in an "advanced" mode with the device-specific parameter called
"device_setup". ``device_setup``.
3.1 - Default Alsa driver mode Default Alsa driver mode
------------------------------ ------------------------
The default behavior of the snd-usb-audio driver is to list the device The default behavior of the snd-usb-audio driver is to list the device
capabilities at startup and activate the required mode when required capabilities at startup and activate the required mode when required
...@@ -101,6 +123,7 @@ Default Alsa driver mode can lead to device misconfigurations. ...@@ -101,6 +123,7 @@ Default Alsa driver mode can lead to device misconfigurations.
Let's get back to the Default Alsa driver mode for now. In this case the Let's get back to the Default Alsa driver mode for now. In this case the
Audiophile interfaces are mapped to alsa pcm devices in the following Audiophile interfaces are mapped to alsa pcm devices in the following
way (I suppose the device's index is 1): way (I suppose the device's index is 1):
* hw:1,0 is Ao in playback and Di in capture * hw:1,0 is Ao in playback and Di in capture
* hw:1,1 is Do in playback and Ai in capture * hw:1,1 is Do in playback and Ai in capture
* hw:1,2 is Do in AC3/DTS passthrough mode * hw:1,2 is Do in AC3/DTS passthrough mode
...@@ -115,20 +138,28 @@ This has been fixed in kernel 2.6.23 and above and now the hw:1,2 interface ...@@ -115,20 +138,28 @@ This has been fixed in kernel 2.6.23 and above and now the hw:1,2 interface
is reported to be big endian in this default driver mode. is reported to be big endian in this default driver mode.
Examples: Examples:
* playing a S24_3BE encoded raw file to the Ao port
* playing a S24_3BE encoded raw file to the Ao port::
% aplay -D hw:1,0 -c2 -t raw -r48000 -fS24_3BE test.raw % aplay -D hw:1,0 -c2 -t raw -r48000 -fS24_3BE test.raw
* recording a S24_3BE encoded raw file from the Ai port
* recording a S24_3BE encoded raw file from the Ai port::
% arecord -D hw:1,1 -c2 -t raw -r48000 -fS24_3BE test.raw % arecord -D hw:1,1 -c2 -t raw -r48000 -fS24_3BE test.raw
* playing a S16_BE encoded raw file to the Do port
* playing a S16_BE encoded raw file to the Do port::
% aplay -D hw:1,1 -c2 -t raw -r48000 -fS16_BE test.raw % aplay -D hw:1,1 -c2 -t raw -r48000 -fS16_BE test.raw
* playing an ac3 sample file to the Do port
* playing an ac3 sample file to the Do port::
% aplay -D hw:1,2 --channels=6 ac3_S16_BE_encoded_file.raw % aplay -D hw:1,2 --channels=6 ac3_S16_BE_encoded_file.raw
If you're happy with the default Alsa driver mode and don't experience any If you're happy with the default Alsa driver mode and don't experience any
issue with this mode, then you can skip the following chapter. issue with this mode, then you can skip the following chapter.
3.2 - Advanced module setup Advanced module setup
--------------------------- ---------------------
Due to the hardware constraints described above, the device initialization made Due to the hardware constraints described above, the device initialization made
by the Alsa driver in default mode may result in a corrupted state of the by the Alsa driver in default mode may result in a corrupted state of the
...@@ -137,34 +168,39 @@ from the Ai interface sounds distorted (as if boosted with an excessive high ...@@ -137,34 +168,39 @@ from the Ai interface sounds distorted (as if boosted with an excessive high
volume gain). volume gain).
For people having this problem, the snd-usb-audio module has a new module For people having this problem, the snd-usb-audio module has a new module
parameter called "device_setup" (this parameter was introduced in kernel parameter called ``device_setup`` (this parameter was introduced in kernel
release 2.6.17) release 2.6.17)
3.2.1 - Initializing the working mode of the Audiophile USB Initializing the working mode of the Audiophile USB
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As far as the Audiophile USB device is concerned, this value let the user As far as the Audiophile USB device is concerned, this value let the user
specify: specify:
* the sample depth * the sample depth
* the sample rate * the sample rate
* whether the Di port is used or not * whether the Di port is used or not
When initialized with "device_setup=0x00", the snd-usb-audio module has When initialized with ``device_setup=0x00``, the snd-usb-audio module has
the same behaviour as when the parameter is omitted (see paragraph "Default the same behaviour as when the parameter is omitted (see paragraph "Default
Alsa driver mode" above) Alsa driver mode" above)
Others modes are described in the following subsections. Others modes are described in the following subsections.
3.2.1.1 - 16-bit modes 16-bit modes
~~~~~~~~~~~~
The two supported modes are: The two supported modes are:
* device_setup=0x01 * ``device_setup=0x01``
- 16bits 48kHz mode with Di disabled - 16bits 48kHz mode with Di disabled
- Ai,Ao,Do can be used at the same time - Ai,Ao,Do can be used at the same time
- hw:1,0 is not available in capture mode - hw:1,0 is not available in capture mode
- hw:1,2 is not available - hw:1,2 is not available
* device_setup=0x11 * ``device_setup=0x11``
- 16bits 48kHz mode with Di enabled - 16bits 48kHz mode with Di enabled
- Ai,Ao,Di,Do can be used at the same time - Ai,Ao,Di,Do can be used at the same time
- hw:1,0 is available in capture mode - hw:1,0 is available in capture mode
...@@ -173,33 +209,43 @@ The two supported modes are: ...@@ -173,33 +209,43 @@ The two supported modes are:
In this modes the device operates only at 16bits-modes. Before kernel 2.6.23, In this modes the device operates only at 16bits-modes. Before kernel 2.6.23,
the devices where reported to be Big-Endian when in fact they were Little-Endian the devices where reported to be Big-Endian when in fact they were Little-Endian
so that playing a file was a matter of using: so that playing a file was a matter of using:
::
% aplay -D hw:1,1 -c2 -t raw -r48000 -fS16_BE test_S16_LE.raw % aplay -D hw:1,1 -c2 -t raw -r48000 -fS16_BE test_S16_LE.raw
where "test_S16_LE.raw" was in fact a little-endian sample file. where "test_S16_LE.raw" was in fact a little-endian sample file.
Thanks to Hakan Lennestal (who discovered the Little-Endiannes of the device in Thanks to Hakan Lennestal (who discovered the Little-Endiannes of the device in
these modes) a fix has been committed (expected in kernel 2.6.23) and these modes) a fix has been committed (expected in kernel 2.6.23) and
Alsa now reports Little-Endian interfaces. Thus playing a file now is as simple as Alsa now reports Little-Endian interfaces. Thus playing a file now is as simple as
using: using:
::
% aplay -D hw:1,1 -c2 -t raw -r48000 -fS16_LE test_S16_LE.raw % aplay -D hw:1,1 -c2 -t raw -r48000 -fS16_LE test_S16_LE.raw
3.2.1.2 - 24-bit modes
24-bit modes
~~~~~~~~~~~~
The three supported modes are: The three supported modes are:
* device_setup=0x09 * ``device_setup=0x09``
- 24bits 48kHz mode with Di disabled - 24bits 48kHz mode with Di disabled
- Ai,Ao,Do can be used at the same time - Ai,Ao,Do can be used at the same time
- hw:1,0 is not available in capture mode - hw:1,0 is not available in capture mode
- hw:1,2 is not available - hw:1,2 is not available
* device_setup=0x19 * ``device_setup=0x19``
- 24bits 48kHz mode with Di enabled - 24bits 48kHz mode with Di enabled
- 3 ports from {Ai,Ao,Di,Do} can be used at the same time - 3 ports from {Ai,Ao,Di,Do} can be used at the same time
- hw:1,0 is available in capture mode and an active digital source must be - hw:1,0 is available in capture mode and an active digital source must be
connected to Di connected to Di
- hw:1,2 is not available - hw:1,2 is not available
* device_setup=0x0D or 0x10 * ``device_setup=0x0D`` or ``0x10``
- 24bits 96kHz mode - 24bits 96kHz mode
- Di is enabled by default for this mode but does not need to be connected - Di is enabled by default for this mode but does not need to be connected
to an active source to an active source
...@@ -210,29 +256,35 @@ The three supported modes are: ...@@ -210,29 +256,35 @@ The three supported modes are:
In these modes the device is only Big-Endian compliant (see "Default Alsa driver In these modes the device is only Big-Endian compliant (see "Default Alsa driver
mode" above for an aplay command example) mode" above for an aplay command example)
3.2.1.3 - AC3 w/ DTS passthru mode AC3 w/ DTS passthru mode
~~~~~~~~~~~~~~~~~~~~~~~~
Thanks to Hakan Lennestal, I now have a report saying that this mode works. Thanks to Hakan Lennestal, I now have a report saying that this mode works.
* device_setup=0x03 * ``device_setup=0x03``
- 16bits 48kHz mode with only the Do port enabled - 16bits 48kHz mode with only the Do port enabled
- AC3 with DTS passthru - AC3 with DTS passthru
- Caution with this setup the Do port is mapped to the pcm device hw:1,0 - Caution with this setup the Do port is mapped to the pcm device hw:1,0
The command line used to playback the AC3/DTS encoded .wav-files in this mode: The command line used to playback the AC3/DTS encoded .wav-files in this mode:
::
% aplay -D hw:1,0 --channels=6 ac3_S16_LE_encoded_file.raw % aplay -D hw:1,0 --channels=6 ac3_S16_LE_encoded_file.raw
3.2.2 - How to use the device_setup parameter How to use the ``device_setup`` parameter
---------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The parameter can be given: The parameter can be given:
* By manually probing the device (as root): * By manually probing the device (as root):::
# modprobe -r snd-usb-audio # modprobe -r snd-usb-audio
# modprobe snd-usb-audio index=1 device_setup=0x09 # modprobe snd-usb-audio index=1 device_setup=0x09
* Or while configuring the modules options in your modules configuration file * Or while configuring the modules options in your modules configuration file
(typically a .conf file in /etc/modprobe.d/ directory: (typically a .conf file in /etc/modprobe.d/ directory:::
alias snd-card-1 snd-usb-audio alias snd-card-1 snd-usb-audio
options snd-usb-audio index=1 device_setup=0x09 options snd-usb-audio index=1 device_setup=0x09
...@@ -250,26 +302,31 @@ CAUTION when initializing the device ...@@ -250,26 +302,31 @@ CAUTION when initializing the device
* If you've correctly initialized the device in a valid mode and then want to switch * If you've correctly initialized the device in a valid mode and then want to switch
to another mode (possibly with another sample-depth), please use also the following to another mode (possibly with another sample-depth), please use also the following
procedure: procedure:
- first turn off the device - first turn off the device
- de-register the snd-usb-audio module (modprobe -r) - de-register the snd-usb-audio module (modprobe -r)
- change the device_setup parameter by changing the device_setup - change the device_setup parameter by changing the device_setup
option in /etc/modprobe.d/*.conf option in ``/etc/modprobe.d/*.conf``
- turn on the device - turn on the device
* A workaround for this last issue has been applied to kernel 2.6.23, but it may not * A workaround for this last issue has been applied to kernel 2.6.23, but it may not
be enough to ensure the 'stability' of the device initialization. be enough to ensure the 'stability' of the device initialization.
3.2.3 - Technical details for hackers Technical details for hackers
------------------------------------- -----------------------------
This section is for hackers, wanting to understand details about the device This section is for hackers, wanting to understand details about the device
internals and how Alsa supports it. internals and how Alsa supports it.
3.2.3.1 - Audiophile USB's device_setup structure Audiophile USB's ``device_setup`` structure
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you want to understand the device_setup magic numbers for the Audiophile If you want to understand the device_setup magic numbers for the Audiophile
USB, you need some very basic understanding of binary computation. However, USB, you need some very basic understanding of binary computation. However,
this is not required to use the parameter and you may skip this section. this is not required to use the parameter and you may skip this section.
The device_setup is one byte long and its structure is the following: The device_setup is one byte long and its structure is the following:
::
+---+---+---+---+---+---+---+---+ +---+---+---+---+---+---+---+---+
| b7| b6| b5| b4| b3| b2| b1| b0| | b7| b6| b5| b4| b3| b2| b1| b0|
...@@ -278,38 +335,55 @@ The device_setup is one byte long and its structure is the following: ...@@ -278,38 +335,55 @@ The device_setup is one byte long and its structure is the following:
+---+---+---+---+---+---+---+---+ +---+---+---+---+---+---+---+---+
Where: Where:
* b0 is the "SET" bit
* b0 is the ``SET`` bit
- it MUST be set if device_setup is initialized - it MUST be set if device_setup is initialized
* b1 is the "DTS" bit
* b1 is the ``DTS`` bit
- it is set only for Digital output with DTS/AC3 - it is set only for Digital output with DTS/AC3
- this setup is not tested - this setup is not tested
* b2 is the Rate selection flag * b2 is the Rate selection flag
- When set to "1" the rate range is 48.1-96kHz
- When set to ``1`` the rate range is 48.1-96kHz
- Otherwise the sample rate range is 8-48kHz - Otherwise the sample rate range is 8-48kHz
* b3 is the bit depth selection flag * b3 is the bit depth selection flag
- When set to "1" samples are 24bits long
- When set to ``1`` samples are 24bits long
- Otherwise they are 16bits long - Otherwise they are 16bits long
- Note that b2 implies b3 as the 96kHz mode is only supported for 24 bits - Note that b2 implies b3 as the 96kHz mode is only supported for 24 bits
samples samples
* b4 is the Digital input flag * b4 is the Digital input flag
- When set to "1" the device assumes that an active digital source is
- When set to ``1`` the device assumes that an active digital source is
connected connected
- You shouldn't enable Di if no source is seen on the port (this leads to - You shouldn't enable Di if no source is seen on the port (this leads to
synchronization issues) synchronization issues)
- b4 is implied by b2 (since only one port is enabled at a time no synch - b4 is implied by b2 (since only one port is enabled at a time no synch
error can occur) error can occur)
* b5 to b7 are reserved for future uses, and must be set to "0"
* b5 to b7 are reserved for future uses, and must be set to ``0``
- might become Ao, Do, Ai, for b7, b6, b4 respectively - might become Ao, Do, Ai, for b7, b6, b4 respectively
Caution: Caution:
* there is no check on the value you will give to device_setup * there is no check on the value you will give to device_setup
- for instance choosing 0x05 (16bits 96kHz) will fail back to 0x09 since - for instance choosing 0x05 (16bits 96kHz) will fail back to 0x09 since
b2 implies b3. But _there_will_be_no_warning_ in /var/log/messages b2 implies b3. But _there_will_be_no_warning_ in /var/log/messages
* Hardware constraints due to the USB bus limitation aren't checked * Hardware constraints due to the USB bus limitation aren't checked
- choosing b2 will prepare all interfaces for 24bits/96kHz but you'll - choosing b2 will prepare all interfaces for 24bits/96kHz but you'll
only be able to use one at the same time only be able to use one at the same time
3.2.3.2 - USB implementation details for this device USB implementation details for this device
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You may safely skip this section if you're not interested in driver You may safely skip this section if you're not interested in driver
hacking. hacking.
...@@ -319,46 +393,72 @@ data I got by usb-snooping the windows and Linux drivers. ...@@ -319,46 +393,72 @@ data I got by usb-snooping the windows and Linux drivers.
The M-Audio Audiophile USB has 7 USB Interfaces: The M-Audio Audiophile USB has 7 USB Interfaces:
a "USB interface": a "USB interface":
* USB Interface nb.0 * USB Interface nb.0
* USB Interface nb.1 * USB Interface nb.1
- Audio Control function - Audio Control function
* USB Interface nb.2 * USB Interface nb.2
- Analog Output - Analog Output
* USB Interface nb.3 * USB Interface nb.3
- Digital Output - Digital Output
* USB Interface nb.4 * USB Interface nb.4
- Analog Input - Analog Input
* USB Interface nb.5 * USB Interface nb.5
- Digital Input - Digital Input
* USB Interface nb.6 * USB Interface nb.6
- MIDI interface compliant with the MIDIMAN quirk - MIDI interface compliant with the MIDIMAN quirk
Each interface has 5 altsettings (AltSet 1,2,3,4,5) except: Each interface has 5 altsettings (AltSet 1,2,3,4,5) except:
* Interface 3 (Digital Out) has an extra Alset nb.6 * Interface 3 (Digital Out) has an extra Alset nb.6
* Interface 5 (Digital In) does not have Alset nb.3 and 5 * Interface 5 (Digital In) does not have Alset nb.3 and 5
Here is a short description of the AltSettings capabilities: Here is a short description of the AltSettings capabilities:
* AltSettings 1 corresponds to
* AltSettings 1 corresponds to
- 24-bit depth, 48.1-96kHz sample mode - 24-bit depth, 48.1-96kHz sample mode
- Adaptive playback (Ao and Do), Synch capture (Ai), or Asynch capture (Di) - Adaptive playback (Ao and Do), Synch capture (Ai), or Asynch capture (Di)
* AltSettings 2 corresponds to
* AltSettings 2 corresponds to
- 24-bit depth, 8-48kHz sample mode - 24-bit depth, 8-48kHz sample mode
- Asynch capture and playback (Ao,Ai,Do,Di) - Asynch capture and playback (Ao,Ai,Do,Di)
* AltSettings 3 corresponds to
* AltSettings 3 corresponds to
- 24-bit depth, 8-48kHz sample mode - 24-bit depth, 8-48kHz sample mode
- Synch capture (Ai) and Adaptive playback (Ao,Do) - Synch capture (Ai) and Adaptive playback (Ao,Do)
* AltSettings 4 corresponds to
* AltSettings 4 corresponds to
- 16-bit depth, 8-48kHz sample mode - 16-bit depth, 8-48kHz sample mode
- Asynch capture and playback (Ao,Ai,Do,Di) - Asynch capture and playback (Ao,Ai,Do,Di)
* AltSettings 5 corresponds to
* AltSettings 5 corresponds to
- 16-bit depth, 8-48kHz sample mode - 16-bit depth, 8-48kHz sample mode
- Synch capture (Ai) and Adaptive playback (Ao,Do) - Synch capture (Ai) and Adaptive playback (Ao,Do)
* AltSettings 6 corresponds to
* AltSettings 6 corresponds to
- 16-bit depth, 8-48kHz sample mode - 16-bit depth, 8-48kHz sample mode
- Synch playback (Do), audio format type III IEC1937_AC-3 - Synch playback (Do), audio format type III IEC1937_AC-3
In order to ensure a correct initialization of the device, the driver In order to ensure a correct initialization of the device, the driver
_must_know_ how the device will be used: *must* *know* how the device will be used:
* if DTS is chosen, only Interface 2 with AltSet nb.6 must be * if DTS is chosen, only Interface 2 with AltSet nb.6 must be
registered registered
* if 96KHz only AltSets nb.1 of each interface must be selected * if 96KHz only AltSets nb.1 of each interface must be selected
...@@ -371,20 +471,21 @@ _must_know_ how the device will be used: ...@@ -371,20 +471,21 @@ _must_know_ how the device will be used:
When device_setup is given as a parameter to the snd-usb-audio module, the When device_setup is given as a parameter to the snd-usb-audio module, the
parse_audio_endpoints function uses a quirk called parse_audio_endpoints function uses a quirk called
"audiophile_skip_setting_quirk" in order to prevent AltSettings not ``audiophile_skip_setting_quirk`` in order to prevent AltSettings not
corresponding to device_setup from being registered in the driver. corresponding to device_setup from being registered in the driver.
4 - Audiophile USB and Jack support Audiophile USB and Jack support
=================================== ===============================
This section deals with support of the Audiophile USB device in Jack. This section deals with support of the Audiophile USB device in Jack.
There are 2 main potential issues when using Jackd with the device: There are 2 main potential issues when using Jackd with the device:
* support for Big-Endian devices in 24-bit modes * support for Big-Endian devices in 24-bit modes
* support for 4-in / 4-out channels * support for 4-in / 4-out channels
4.1 - Direct support in Jackd Direct support in Jackd
----------------------------- -----------------------
Jack supports big endian devices only in recent versions (thanks to Jack supports big endian devices only in recent versions (thanks to
Andreas Steinmetz for his first big-endian patch). I can't remember Andreas Steinmetz for his first big-endian patch). I can't remember
...@@ -396,29 +497,35 @@ are now Little Endians ;-) ). ...@@ -396,29 +497,35 @@ are now Little Endians ;-) ).
You can run jackd with the following command for playback with Ao and You can run jackd with the following command for playback with Ao and
record with Ai: record with Ai:
::
% jackd -R -dalsa -Phw:1,0 -r48000 -p128 -n2 -D -Chw:1,1 % jackd -R -dalsa -Phw:1,0 -r48000 -p128 -n2 -D -Chw:1,1
4.2 - Using Alsa plughw Using Alsa plughw
----------------------- -----------------
If you don't have a recent Jackd installed, you can downgrade to using If you don't have a recent Jackd installed, you can downgrade to using
the Alsa "plug" converter. the Alsa ``plug`` converter.
For instance here is one way to run Jack with 2 playback channels on Ao and 2 For instance here is one way to run Jack with 2 playback channels on Ao and 2
capture channels from Ai: capture channels from Ai:
::
% jackd -R -dalsa -dplughw:1 -r48000 -p256 -n2 -D -Cplughw:1,1 % jackd -R -dalsa -dplughw:1 -r48000 -p256 -n2 -D -Cplughw:1,1
However you may see the following warning message: However you may see the following warning message:
"You appear to be using the ALSA software "plug" layer, probably a result of You appear to be using the ALSA software "plug" layer, probably a result of
using the "default" ALSA device. This is less efficient than it could be. using the "default" ALSA device. This is less efficient than it could be.
Consider using a hardware device instead rather than using the plug layer." Consider using a hardware device instead rather than using the plug layer.
4.3 - Getting 2 input and/or output interfaces in Jack Getting 2 input and/or output interfaces in Jack
------------------------------------------------------ ------------------------------------------------
As you can see, starting the Jack server this way will only enable 1 stereo As you can see, starting the Jack server this way will only enable 1 stereo
input (Di or Ai) and 1 stereo output (Ao or Do). input (Di or Ai) and 1 stereo output (Ao or Do).
This is due to the following restrictions: This is due to the following restrictions:
* Jack can only open one capture device and one playback device at a time * Jack can only open one capture device and one playback device at a time
* The Audiophile USB is seen as 2 (or three) Alsa devices: hw:1,0, hw:1,1 * The Audiophile USB is seen as 2 (or three) Alsa devices: hw:1,0, hw:1,1
(and optionally hw:1,2) (and optionally hw:1,2)
...@@ -432,6 +539,7 @@ It is related to another device (ice1712) but can be adapted to suit ...@@ -432,6 +539,7 @@ It is related to another device (ice1712) but can be adapted to suit
the Audiophile USB. the Audiophile USB.
Enabling multiple Audiophile USB interfaces for Jackd will certainly require: Enabling multiple Audiophile USB interfaces for Jackd will certainly require:
* Making sure your Jackd version has the MMAP_COMPLEX patch (see the ice1712 page) * Making sure your Jackd version has the MMAP_COMPLEX patch (see the ice1712 page)
* (maybe) patching the alsa-lib/src/pcm/pcm_multi.c file (see the ice1712 page) * (maybe) patching the alsa-lib/src/pcm/pcm_multi.c file (see the ice1712 page)
* define a multi device (combination of hw:1,0 and hw:1,1) in your .asoundrc * define a multi device (combination of hw:1,0 and hw:1,1) in your .asoundrc
......
Documentation/sound/cards/index.rst
View file @ 4e47556e
...@@ -10,3 +10,4 @@ Card-Specific Information ...@@ -10,3 +10,4 @@ Card-Specific Information
audigy-mixer audigy-mixer
emu10k1-jack emu10k1-jack
via82xx-mixer via82xx-mixer
audiophile-usb
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7