Commit 4e4d2bcf authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] zl10353: convert set_fontend to use DVBv5 parameters

Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.

Also, fill the supported delivery systems at dvb_frontend_ops
struct.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent f20b12ec
......@@ -37,7 +37,7 @@ struct zl10353_state {
struct zl10353_config config;
enum fe_bandwidth bandwidth;
u32 bandwidth;
u32 ucblocks;
u32 frequency;
};
......@@ -122,30 +122,17 @@ static void zl10353_dump_regs(struct dvb_frontend *fe)
}
static void zl10353_calc_nominal_rate(struct dvb_frontend *fe,
enum fe_bandwidth bandwidth,
u32 bandwidth,
u16 *nominal_rate)
{
struct zl10353_state *state = fe->demodulator_priv;
u32 adc_clock = 450560; /* 45.056 MHz */
u64 value;
u8 bw;
u8 bw = bandwidth / 1000000;
if (state->config.adc_clock)
adc_clock = state->config.adc_clock;
switch (bandwidth) {
case BANDWIDTH_6_MHZ:
bw = 6;
break;
case BANDWIDTH_7_MHZ:
bw = 7;
break;
case BANDWIDTH_8_MHZ:
default:
bw = 8;
break;
}
value = (u64)10 * (1 << 23) / 7 * 125;
value = (bw * value) + adc_clock / 2;
do_div(value, adc_clock);
......@@ -192,16 +179,15 @@ static int zl10353_sleep(struct dvb_frontend *fe)
return 0;
}
static int zl10353_set_parameters(struct dvb_frontend *fe,
struct dvb_frontend_parameters *param)
static int zl10353_set_parameters(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct zl10353_state *state = fe->demodulator_priv;
u16 nominal_rate, input_freq;
u8 pllbuf[6] = { 0x67 }, acq_ctl = 0;
u16 tps = 0;
struct dvb_ofdm_parameters *op = &param->u.ofdm;
state->frequency = param->frequency;
state->frequency = c->frequency;
zl10353_single_write(fe, RESET, 0x80);
udelay(200);
......@@ -211,42 +197,44 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
zl10353_single_write(fe, AGC_TARGET, 0x28);
if (op->transmission_mode != TRANSMISSION_MODE_AUTO)
if (c->transmission_mode != TRANSMISSION_MODE_AUTO)
acq_ctl |= (1 << 0);
if (op->guard_interval != GUARD_INTERVAL_AUTO)
if (c->guard_interval != GUARD_INTERVAL_AUTO)
acq_ctl |= (1 << 1);
zl10353_single_write(fe, ACQ_CTL, acq_ctl);
switch (op->bandwidth) {
case BANDWIDTH_6_MHZ:
switch (c->bandwidth_hz) {
case 6000000:
/* These are extrapolated from the 7 and 8MHz values */
zl10353_single_write(fe, MCLK_RATIO, 0x97);
zl10353_single_write(fe, 0x64, 0x34);
zl10353_single_write(fe, 0xcc, 0xdd);
break;
case BANDWIDTH_7_MHZ:
case 7000000:
zl10353_single_write(fe, MCLK_RATIO, 0x86);
zl10353_single_write(fe, 0x64, 0x35);
zl10353_single_write(fe, 0xcc, 0x73);
break;
case BANDWIDTH_8_MHZ:
default:
c->bandwidth_hz = 8000000;
/* fall though */
case 8000000:
zl10353_single_write(fe, MCLK_RATIO, 0x75);
zl10353_single_write(fe, 0x64, 0x36);
zl10353_single_write(fe, 0xcc, 0x73);
}
zl10353_calc_nominal_rate(fe, op->bandwidth, &nominal_rate);
zl10353_calc_nominal_rate(fe, c->bandwidth_hz, &nominal_rate);
zl10353_single_write(fe, TRL_NOMINAL_RATE_1, msb(nominal_rate));
zl10353_single_write(fe, TRL_NOMINAL_RATE_0, lsb(nominal_rate));
state->bandwidth = op->bandwidth;
state->bandwidth = c->bandwidth_hz;
zl10353_calc_input_freq(fe, &input_freq);
zl10353_single_write(fe, INPUT_FREQ_1, msb(input_freq));
zl10353_single_write(fe, INPUT_FREQ_0, lsb(input_freq));
/* Hint at TPS settings */
switch (op->code_rate_HP) {
switch (c->code_rate_HP) {
case FEC_2_3:
tps |= (1 << 7);
break;
......@@ -266,7 +254,7 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
return -EINVAL;
}
switch (op->code_rate_LP) {
switch (c->code_rate_LP) {
case FEC_2_3:
tps |= (1 << 4);
break;
......@@ -283,14 +271,14 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
case FEC_AUTO:
break;
case FEC_NONE:
if (op->hierarchy_information == HIERARCHY_AUTO ||
op->hierarchy_information == HIERARCHY_NONE)
if (c->hierarchy == HIERARCHY_AUTO ||
c->hierarchy == HIERARCHY_NONE)
break;
default:
return -EINVAL;
}
switch (op->constellation) {
switch (c->modulation) {
case QPSK:
break;
case QAM_AUTO:
......@@ -304,7 +292,7 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
return -EINVAL;
}
switch (op->transmission_mode) {
switch (c->transmission_mode) {
case TRANSMISSION_MODE_2K:
case TRANSMISSION_MODE_AUTO:
break;
......@@ -315,7 +303,7 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
return -EINVAL;
}
switch (op->guard_interval) {
switch (c->guard_interval) {
case GUARD_INTERVAL_1_32:
case GUARD_INTERVAL_AUTO:
break;
......@@ -332,7 +320,7 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
return -EINVAL;
}
switch (op->hierarchy_information) {
switch (c->hierarchy) {
case HIERARCHY_AUTO:
case HIERARCHY_NONE:
break;
......@@ -384,10 +372,9 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
}
static int zl10353_get_parameters(struct dvb_frontend *fe,
struct dvb_frontend_parameters *param)
struct dtv_frontend_properties *c)
{
struct zl10353_state *state = fe->demodulator_priv;
struct dvb_ofdm_parameters *op = &param->u.ofdm;
int s6, s9;
u16 tps;
static const u8 tps_fec_to_api[8] = {
......@@ -411,66 +398,66 @@ static int zl10353_get_parameters(struct dvb_frontend *fe,
tps = zl10353_read_register(state, TPS_RECEIVED_1) << 8 |
zl10353_read_register(state, TPS_RECEIVED_0);
op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7];
op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7];
c->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7];
c->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7];
switch ((tps >> 13) & 3) {
case 0:
op->constellation = QPSK;
c->modulation = QPSK;
break;
case 1:
op->constellation = QAM_16;
c->modulation = QAM_16;
break;
case 2:
op->constellation = QAM_64;
c->modulation = QAM_64;
break;
default:
op->constellation = QAM_AUTO;
c->modulation = QAM_AUTO;
break;
}
op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K :
c->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K :
TRANSMISSION_MODE_2K;
switch ((tps >> 2) & 3) {
case 0:
op->guard_interval = GUARD_INTERVAL_1_32;
c->guard_interval = GUARD_INTERVAL_1_32;
break;
case 1:
op->guard_interval = GUARD_INTERVAL_1_16;
c->guard_interval = GUARD_INTERVAL_1_16;
break;
case 2:
op->guard_interval = GUARD_INTERVAL_1_8;
c->guard_interval = GUARD_INTERVAL_1_8;
break;
case 3:
op->guard_interval = GUARD_INTERVAL_1_4;
c->guard_interval = GUARD_INTERVAL_1_4;
break;
default:
op->guard_interval = GUARD_INTERVAL_AUTO;
c->guard_interval = GUARD_INTERVAL_AUTO;
break;
}
switch ((tps >> 10) & 7) {
case 0:
op->hierarchy_information = HIERARCHY_NONE;
c->hierarchy = HIERARCHY_NONE;
break;
case 1:
op->hierarchy_information = HIERARCHY_1;
c->hierarchy = HIERARCHY_1;
break;
case 2:
op->hierarchy_information = HIERARCHY_2;
c->hierarchy = HIERARCHY_2;
break;
case 3:
op->hierarchy_information = HIERARCHY_4;
c->hierarchy = HIERARCHY_4;
break;
default:
op->hierarchy_information = HIERARCHY_AUTO;
c->hierarchy = HIERARCHY_AUTO;
break;
}
param->frequency = state->frequency;
op->bandwidth = state->bandwidth;
param->inversion = INVERSION_AUTO;
c->frequency = state->frequency;
c->bandwidth_hz = state->bandwidth;
c->inversion = INVERSION_AUTO;
return 0;
}
......@@ -651,7 +638,7 @@ struct dvb_frontend *zl10353_attach(const struct zl10353_config *config,
}
static struct dvb_frontend_ops zl10353_ops = {
.delsys = { SYS_DVBT },
.info = {
.name = "Zarlink ZL10353 DVB-T",
.type = FE_OFDM,
......@@ -675,8 +662,8 @@ static struct dvb_frontend_ops zl10353_ops = {
.i2c_gate_ctrl = zl10353_i2c_gate_ctrl,
.write = zl10353_write,
.set_frontend_legacy = zl10353_set_parameters,
.get_frontend_legacy = zl10353_get_parameters,
.set_frontend = zl10353_set_parameters,
.get_frontend = zl10353_get_parameters,
.get_tune_settings = zl10353_get_tune_settings,
.read_status = zl10353_read_status,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment