[PATCH] scanner.c, scanner.h: Remove PV8630 ioctls

This patch removes the inofficial ioctls that were used to support the
PV8630 USB-over-Parport chipset. They were alreaded ifdefed out.
Instead of them, the more generic (and official) SCANNER_IOCTL_CTRLMSG
should be used. The last software that used the old ioctl
(sane-hp4200) switched to the new ioctls a long time ago.

This patch is ontop of the "user-supplied" patch.

drivers/usb/image/scanner.c

@@ -335,13 +335,13 @@
  *    - Added vendor/product ids for Visioneer scanners.
  *    - Print information about user-supplied ids only once at startup instead
  *      of everytime any USB device is plugged in.
+ *    - Removed PV8630 ioctls. Use the standard ioctls instead.
  *      
  * TODO
  *    - Remove the 2/3 endpoint limitation
  *    - Performance
  *    - Select/poll methods
  *    - More testing
- *    - Proper registry/assignment for LM9830 ioctl's
  *    - More general usage ioctl's
  *
  *
@@ -736,62 +736,6 @@ ioctl_scanner(struct inode *inode, struct file *file,
 	case SCANNER_IOCTL_PRODUCT :
 		retval = (put_user(dev->descriptor.idProduct, (unsigned int *) arg));
 		break;
-#ifdef PV8630
-	case PV8630_IOCTL_INREQUEST :
-	{
-		struct {
-			__u8  data;
-			__u8  request;
-			__u16 value;
-			__u16 index;
-		} args;
-
-		if (copy_from_user(&args, (void *)arg, sizeof(args))) {
-			retval = -EFAULT;
-			break;
-		}
-
-		retval = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-					 args.request, USB_TYPE_VENDOR|
-					 USB_RECIP_DEVICE|USB_DIR_IN,
-					 args.value, args.index, &args.data,
-					 1, HZ*5);
-
-		dbg("ioctl_scanner(%d): inreq: args.data:%x args.value:%x args.index:%x args.request:%x\n", scn_minor, args.data, args.value, args.index, args.request);
-
-		if (copy_to_user((void *)arg, &args, sizeof(args)))
-			retval = -EFAULT;
-
-		dbg("ioctl_scanner(%d): inreq: result:%d\n", scn_minor, retval);
-
-		break;
-	}
-	case PV8630_IOCTL_OUTREQUEST :
-	{
-		struct {
-			__u8  request;
-			__u16 value;
-			__u16 index;
-		} args;
-
-		if (copy_from_user(&args, (void *)arg, sizeof(args))) {
-			retval = -EFAULT;
-			break;
-		}
-
-		dbg("ioctl_scanner(%d): outreq: args.value:%x args.index:%x args.request:%x\n", scn_minor, args.value, args.index, args.request);
-
-		retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-					 args.request, USB_TYPE_VENDOR|
-					 USB_RECIP_DEVICE|USB_DIR_OUT,
-					 args.value, args.index, NULL,
-					 0, HZ*5);
-
-		dbg("ioctl_scanner(%d): outreq: result:%d\n", scn_minor, retval);
-
-		break;
-	}
-#endif /* PV8630 */
  	case SCANNER_IOCTL_CTRLMSG:
  	{
  		struct ctrlmsg_ioctl {

drivers/usb/image/scanner.h

 /*
- * Driver for USB Scanners (linux-2.5.52)
+ * Driver for USB Scanners (linux-2.5.54)
  *
  * Copyright (C) 1999, 2000, 2001, 2002 David E. Nelson
  *
@@ -38,13 +38,7 @@
 
 // #define DEBUG
 
-/* Enable this to support the older ioctl interfaces scanners that
- * a PV8630 Scanner-On-Chip.  The prefered method is the
- * SCANNER_IOCTL_CTRLMSG ioctl.
- */
-// #define PV8630 
-
-#define DRIVER_VERSION "0.4.9"
+#define DRIVER_VERSION "0.4.10"
 #define DRIVER_DESC "USB Scanner Driver"
 
 #include <linux/usb.h>
@@ -270,13 +264,6 @@ MODULE_DEVICE_TABLE (usb, scanner_device_ids);
 #define RD_EXPIRE 12		/* Number of attempts to wait X seconds */
 
 
-/* FIXME: These are NOT registered ioctls()'s */
-#ifdef PV8630
-#define PV8630_IOCTL_INREQUEST 69
-#define PV8630_IOCTL_OUTREQUEST 70
-#endif /* PV8630 */
-
-
 /* read vendor and product IDs from the scanner */
 #define SCANNER_IOCTL_VENDOR _IOR('U', 0x20, int)
 #define SCANNER_IOCTL_PRODUCT _IOR('U', 0x21, int)