Commit 4ed094fd authored by Philipp Zabel's avatar Philipp Zabel

drm/imx: use bus_flags for pixel clock polarity

This patch allows panels to set pixel clock and data enable pin polarity
other than the default of driving data at the falling pixel clock edge
and active high display enable.
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
parent 7932131f
......@@ -97,8 +97,8 @@ static struct imx_drm_crtc *imx_drm_find_crtc(struct drm_crtc *crtc)
return NULL;
}
int imx_drm_set_bus_format_pins(struct drm_encoder *encoder, u32 bus_format,
int hsync_pin, int vsync_pin)
int imx_drm_set_bus_config(struct drm_encoder *encoder, u32 bus_format,
int hsync_pin, int vsync_pin, u32 bus_flags)
{
struct imx_drm_crtc_helper_funcs *helper;
struct imx_drm_crtc *imx_crtc;
......@@ -110,14 +110,17 @@ int imx_drm_set_bus_format_pins(struct drm_encoder *encoder, u32 bus_format,
helper = &imx_crtc->imx_drm_helper_funcs;
if (helper->set_interface_pix_fmt)
return helper->set_interface_pix_fmt(encoder->crtc,
bus_format, hsync_pin, vsync_pin);
bus_format, hsync_pin, vsync_pin,
bus_flags);
return 0;
}
EXPORT_SYMBOL_GPL(imx_drm_set_bus_format_pins);
EXPORT_SYMBOL_GPL(imx_drm_set_bus_config);
int imx_drm_set_bus_format(struct drm_encoder *encoder, u32 bus_format)
{
return imx_drm_set_bus_format_pins(encoder, bus_format, 2, 3);
return imx_drm_set_bus_config(encoder, bus_format, 2, 3,
DRM_BUS_FLAG_DE_HIGH |
DRM_BUS_FLAG_PIXDATA_NEGEDGE);
}
EXPORT_SYMBOL_GPL(imx_drm_set_bus_format);
......
......@@ -19,7 +19,8 @@ struct imx_drm_crtc_helper_funcs {
int (*enable_vblank)(struct drm_crtc *crtc);
void (*disable_vblank)(struct drm_crtc *crtc);
int (*set_interface_pix_fmt)(struct drm_crtc *crtc,
u32 bus_format, int hsync_pin, int vsync_pin);
u32 bus_format, int hsync_pin, int vsync_pin,
u32 bus_flags);
const struct drm_crtc_helper_funcs *crtc_helper_funcs;
const struct drm_crtc_funcs *crtc_funcs;
};
......@@ -41,8 +42,8 @@ void imx_drm_mode_config_init(struct drm_device *drm);
struct drm_gem_cma_object *imx_drm_fb_get_obj(struct drm_framebuffer *fb);
int imx_drm_set_bus_format_pins(struct drm_encoder *encoder,
u32 bus_format, int hsync_pin, int vsync_pin);
int imx_drm_set_bus_config(struct drm_encoder *encoder, u32 bus_format,
int hsync_pin, int vsync_pin, u32 bus_flags);
int imx_drm_set_bus_format(struct drm_encoder *encoder,
u32 bus_format);
......
......@@ -294,8 +294,10 @@ static void imx_tve_encoder_prepare(struct drm_encoder *encoder)
switch (tve->mode) {
case TVE_MODE_VGA:
imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_GBR888_1X24,
tve->hsync_pin, tve->vsync_pin);
imx_drm_set_bus_config(encoder, MEDIA_BUS_FMT_GBR888_1X24,
tve->hsync_pin, tve->vsync_pin,
DRM_BUS_FLAG_DE_HIGH |
DRM_BUS_FLAG_PIXDATA_NEGEDGE);
break;
case TVE_MODE_TVOUT:
imx_drm_set_bus_format(encoder, MEDIA_BUS_FMT_YUV8_1X24);
......
......@@ -66,6 +66,7 @@ struct ipu_crtc {
struct ipu_flip_work *flip_work;
int irq;
u32 bus_format;
u32 bus_flags;
int di_hsync_pin;
int di_vsync_pin;
};
......@@ -271,8 +272,10 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,
else
sig_cfg.clkflags = 0;
sig_cfg.enable_pol = 1;
sig_cfg.clk_pol = 0;
sig_cfg.enable_pol = !(ipu_crtc->bus_flags & DRM_BUS_FLAG_DE_LOW);
/* Default to driving pixel data on negative clock edges */
sig_cfg.clk_pol = !!(ipu_crtc->bus_flags &
DRM_BUS_FLAG_PIXDATA_POSEDGE);
sig_cfg.bus_format = ipu_crtc->bus_format;
sig_cfg.v_to_h_sync = 0;
sig_cfg.hsync_pin = ipu_crtc->di_hsync_pin;
......@@ -396,11 +399,12 @@ static void ipu_disable_vblank(struct drm_crtc *crtc)
}
static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc,
u32 bus_format, int hsync_pin, int vsync_pin)
u32 bus_format, int hsync_pin, int vsync_pin, u32 bus_flags)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
ipu_crtc->bus_format = bus_format;
ipu_crtc->bus_flags = bus_flags;
ipu_crtc->di_hsync_pin = hsync_pin;
ipu_crtc->di_vsync_pin = vsync_pin;
......
......@@ -115,8 +115,8 @@ static void imx_pd_encoder_dpms(struct drm_encoder *encoder, int mode)
static void imx_pd_encoder_prepare(struct drm_encoder *encoder)
{
struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
imx_drm_set_bus_format(encoder, imxpd->bus_format);
imx_drm_set_bus_config(encoder, imxpd->bus_format, 2, 3,
imxpd->connector.display_info.bus_flags);
}
static void imx_pd_encoder_commit(struct drm_encoder *encoder)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment