Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Olof Johansson:
 "This is some material that we picked up into our tree late, or that
  had more complex dependencies on more than one topic branch that makes
  sense to keep separately.

   - TI support for secure accelerators and hwrng on OMAP4/5

   - TI camera changes for dra7 and am437x and SGX improvement due to
     better reset control support on am335x, am437x and dra7

   - Davinci moves to proper clocksource on DM365, and regulator/audio
     improvements for DM365 and DM644x eval boards"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
  ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem
  ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt
  ARM: dts: Configure interconnect target module for am437x sgx
  ARM: dts: Configure sgx for dra7
  ARM: dts: Configure rstctrl reset for am335x SGX
  ARM: dts: dra7: Add ti-sysc node for VPE
  ARM: dts: dra7: add vpe clkctrl node
  ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
  ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
  ARM: dts: am43xx: add support for clkout1 clock
  arm: dts: dra76-evm: Add CAL and OV5640 nodes
  arm: dtsi: dra76x: Add CAL dtsi node
  arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
  ARM: dts: DRA72: Add CAL dtsi node
  ARM: dts: dra7-l4: Add ti-sysc node for CAM
  ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  ARM: dts: dra7: add cam clkctrl node
  ARM: OMAP2+: Drop legacy platform data for omap4 des
  ARM: OMAP2+: Drop legacy platform data for omap4 sham
  ARM: OMAP2+: Drop legacy platform data for omap4 aes
  ...

arch/arm/boot/dts/am33xx.dtsi

@@ -496,6 +496,31 @@ aes: aes@0 {
 				dma-names = "tx", "rx";
 			};
 		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
 	};
 };
 

arch/arm/boot/dts/am4372.dtsi

@@ -445,6 +445,26 @@ pm_sram_data: pm-data-sram@1000 {
 				pool;
 			};
 		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+		};
 	};
 };
 

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -272,6 +272,12 @@ AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 		>;
 	};
 
+	clkout1_pin: pinmux_clkout1_pin {
+		pinctrl-single,pins = <
+			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
+		>;
+	};
+
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
@@ -593,6 +599,25 @@ &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkout1_pin>;
+
+		clocks = <&clkout1_mux_ck>;
+		clock-names = "xvclk";
+		assigned-clocks = <&clkout1_mux_ck>;
+		assigned-clock-parents = <&clkout1_osc_div_ck>;
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+
 	edt-ft5306@38 {
 		status = "okay";
 		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
@@ -877,7 +902,7 @@ &vpfe0 {
 	/* Camera port */
 	port {
 		vpfe0_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -145,6 +145,12 @@ sound0_master: simple-audio-card,codec {
 			system-clock-frequency = <12000000>;
 		};
 	};
+
+	audio_mstrclk: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
 };
 
 &am43xx_pinmux {
@@ -696,6 +702,21 @@ tlv320aic3111: tlv320aic3111@18 {
 		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
 		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
 	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&audio_mstrclk>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &i2c2 {
@@ -964,7 +985,7 @@ &vpfe1 {
 
 	port {
 		vpfe1_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;

arch/arm/boot/dts/am43xx-clocks.dtsi

@@ -704,6 +704,60 @@ usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
+
+	clkout1_osc_div_ck: clkout1-osc-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1-ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
 };
 
 &prcm {

arch/arm/boot/dts/dra7-l4.dtsi

@@ -4176,35 +4176,88 @@ usb4_tm: target-module@140000 {		/* 0x48940000, ap 75 3c.0 */
 		};
 
 		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x170010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x170000 0x10000>;
+			status = "disabled";
 		};
 
 		target-module@190000 {			/* 0x48990000, ap 23 2e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x190010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x190000 0x10000>;
+			status = "disabled";
 		};
 
 		target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1b0000 0x4>,
+			      <0x1b0010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x1b0000 0x10000>;
+			status = "disabled";
 		};
 
-		target-module@1d0000 {			/* 0x489d0000, ap 27 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		target-module@1d0010 {			/* 0x489d0000, ap 27 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1d0010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x1d0000 0x10000>;
+
+			vpe: vpe@0 {
+				compatible = "ti,dra7-vpe";
+				reg = <0x0000 0x120>,
+				      <0x0700 0x80>,
+				      <0x5700 0x18>,
+				      <0xd000 0x400>;
+				reg-names = "vpe_top",
+					    "sc",
+					    "csc",
+					    "vpdma";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 	};
 };

arch/arm/boot/dts/dra7.dtsi

@@ -673,6 +673,24 @@ gpmc: gpmc@50000000 {
 			status = "disabled";
 		};
 
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;

arch/arm/boot/dts/dra72-evm-common.dtsi

@@ -187,6 +187,12 @@ vmmcwl_fixed: fixedregulator-mmcwl {
 		gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &dra7_pmx_core {
@@ -269,6 +275,23 @@ p1 {
 			line-name = "vin6_sel_s0";
 		};
 	};
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
 };
 
 &uart1 {
@@ -580,3 +603,11 @@ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 &pcie1_rc {
 	status = "okay";
 };
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};

arch/arm/boot/dts/dra72x.dtsi

@@ -17,6 +17,48 @@ pmu {
 	};
 };
 
+&l4_per2 {
+	target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x5b000 0x4>,
+		      <0x5b010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5b000 0x1000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra72-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0xE94>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 &dss {
 	reg = <0x58000000 0x80>,
 	      <0x58004054 0x4>,

arch/arm/boot/dts/dra76-evm.dts

@@ -124,6 +124,12 @@ aic_dvdd: fixedregulator-aic_dvdd {
 		regulator-max-microvolt = <1800000>;
 	};
 
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -366,6 +372,27 @@ tlv320aic3106: tlv320aic3106@19 {
 	};
 };
 
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
 &cpu0 {
 	vdd-supply = <&buck10_reg>;
 };
@@ -513,3 +540,11 @@ can-transceiver {
 		max-bitrate = <5000000>;
 	};
 };
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};

arch/arm/boot/dts/dra76x.dtsi

@@ -41,6 +41,48 @@ m_can0: mcan@1a00 {
 
 };
 
+&l4_per3 {
+	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x1b0000 0x4>,
+		      <0x1b0010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1b0000 0x10000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra76-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0x6dc>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 /* MCAN interrupts are hard-wired to irqs 67, 68 */
 &crossbar_mpu {
 	ti,irqs-skip = <10 67 68 133 139 140>;

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -1591,10 +1591,10 @@ dsp2_clkctrl: dsp2-clkctrl@20 {
 
 	rtc_cm: rtc-cm@700 {
 		compatible = "ti,omap4-cm";
-		reg = <0x700 0x100>;
+		reg = <0x700 0x60>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
+		ranges = <0 0x700 0x60>;
 
 		rtc_clkctrl: rtc-clkctrl@20 {
 			compatible = "ti,clkctrl";
@@ -1603,6 +1603,20 @@ rtc_clkctrl: rtc-clkctrl@20 {
 		};
 	};
 
+	vpe_cm: vpe-cm@760 {
+		compatible = "ti,omap4-cm";
+		reg = <0x760 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x760 0xc>;
+
+		vpe_clkctrl: vpe-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
 };
 
 &cm_core {
@@ -1720,6 +1734,20 @@ l3instr_clkctrl: l3instr-clkctrl@20 {
 		};
 	};
 
+	cam_cm: cam-cm@1000 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000 0x100>;
+
+		cam_clkctrl: cam-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x2c>;
+			#clock-cells = <2>;
+		};
+	};
+
 	dss_cm: dss-cm@1100 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1100 0x100>;

arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi

@@ -27,11 +27,12 @@ cpcap_battery: battery {
 			compatible = "motorola,cpcap-battery";
 			interrupts-extended = <
 				&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
-				&cpcap 20 0 &cpcap 54 0
+				&cpcap 20 0 &cpcap 54 0 &cpcap 57 0
 			>;
 			interrupt-names =
 				"eol", "lowbph", "lowbpl",
-				"chrgcurr1", "battdetb";
+				"chrgcurr1", "battdetb",
+				"cccal";
 			io-channels = <&cpcap_adc 0 &cpcap_adc 1
 				       &cpcap_adc 5 &cpcap_adc 6>;
 			io-channel-names = "battdetb", "battp",

arch/arm/boot/dts/motorola-mapphone-common.dtsi

@@ -249,6 +249,13 @@ hdmi_out: endpoint {
 	};
 };
 
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
 &i2c1 {
 	tmp105@48 {
 		compatible = "ti,tmp105";
@@ -440,6 +447,13 @@ OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
 		>;
 	};
 
+	hdq_pins: pinmux_hdq_pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
 	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
@@ -650,6 +664,11 @@ OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
 	};
 };
 
+/* RNG is used by secure mode and not accessible */
+&rng_target {
+	status = "disabled";
+};
+
 /* Configure pwm clock source for timers 8 & 9 */
 &timer8 {
 	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;

arch/arm/boot/dts/omap4-l4.dtsi

@@ -1990,12 +1990,26 @@ timer11: timer@0 {
 			};
 		};
 
-		target-module@90000 {			/* 0x48090000, ap 57 2a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		rng_target: target-module@90000 {	/* 0x48090000, ap 57 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		target-module@96000 {			/* 0x48096000, ap 37 26.0 */
@@ -2159,6 +2173,35 @@ target-module@a4000 {			/* 0x480a4000, ap 59 34.0 */
 				 <0x00001000 0x000a5000 0x00001000>;
 		};
 
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 117>, <&sdma 116>;
+				dma-names = "tx", "rx";
+			};
+		};
+
 		target-module@a8000 {			/* 0x480a8000, ap 61 3e.0 */
 			compatible = "ti,sysc";
 			status = "disabled";

arch/arm/boot/dts/omap4.dtsi

@@ -278,41 +278,91 @@ emif2: emif@4d000000 {
 			hw-caps-temp-alert;
 		};
 
-		aes1: aes@4b501000 {
+		aes1_target: target-module@4b501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b501080 0x4>,
+			      <0x4b501084 0x4>,
+			      <0x4b501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b501000 0x1000>;
+
+			aes1: aes@0 {
 				compatible = "ti,omap4-aes";
-			ti,hwmods = "aes1";
-			reg = <0x4b501000 0xa0>;
+				reg = <0 0xa0>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&sdma 111>, <&sdma 110>;
 				dma-names = "tx", "rx";
 			};
+		};
 
-		aes2: aes@4b701000 {
+		aes2_target: target-module@4b701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b701080 0x4>,
+			      <0x4b701084 0x4>,
+			      <0x4b701088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b701000 0x1000>;
+
+			aes2: aes@0 {
 				compatible = "ti,omap4-aes";
-			ti,hwmods = "aes2";
-			reg = <0x4b701000 0xa0>;
+				reg = <0 0xa0>;
 				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&sdma 114>, <&sdma 113>;
 				dma-names = "tx", "rx";
 			};
-
-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 117>, <&sdma 116>;
-			dma-names = "tx", "rx";
 		};
 
-		sham: sham@4b100000 {
+		sham_target: target-module@4b100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b100100 0x4>,
+			      <0x4b100110 0x4>,
+			      <0x4b100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b100000 0x1000>;
+
+			sham: sham@0 {
 				compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x4b100000 0x300>;
+				reg = <0 0x300>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&sdma 119>;
 				dma-names = "rx";
 			};
+		};
 
 		abb_mpu: regulator-abb-mpu {
 			compatible = "ti,abb-v2";

arch/arm/boot/dts/omap44xx-clocks.dtsi

@@ -1279,13 +1279,18 @@ l4_per_cm: l4_per_cm@1400 {
 		#size-cells = <1>;
 		ranges = <0 0x1400 0x200>;
 
-		l4_per_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
+		l4_per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
 			reg = <0x20 0x144>;
 			#clock-cells = <2>;
 		};
-	};
 
+		l4_secure_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4-secure", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
+	};
 };
 
 &prm {

arch/arm/boot/dts/omap5-l4.dtsi

@@ -1764,12 +1764,26 @@ timer11: timer@0 {
 			};
 		};
 
-		target-module@90000 {			/* 0x48090000, ap 55 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		rng_target: target-module@90000 {	/* 0x48090000, ap 55 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_RNG_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		target-module@98000 {			/* 0x48098000, ap 47 08.0 */

arch/arm/boot/dts/omap54xx-clocks.dtsi

@@ -1125,11 +1125,17 @@ l4per_cm: l4per_cm@1000 {
 		#size-cells = <1>;
 		ranges = <0 0x1000 0x200>;
 
-		l4per_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
+		l4per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4per", "ti,clkctrl";
 			reg = <0x20 0x15c>;
 			#clock-cells = <2>;
 		};
+
+		l4sec_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4sec", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
 	};
 
 	dss_cm: dss_cm@1400 {

arch/arm/mach-davinci/Makefile

@@ -7,8 +7,7 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
 # Common objects
-obj-y 					:= time.o serial.o usb.o \
-					   common.o sram.o
+obj-y 					:= serial.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 

arch/arm/mach-davinci/board-dm365-evm.c

@@ -30,6 +30,8 @@
 #include <linux/spi/eeprom.h>
 #include <linux/v4l2-dv-timings.h>
 #include <linux/platform_data/ti-aemif.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -245,6 +247,19 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+/* Fixed regulator support */
+static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
+	/* Baseboard 3.3V: 5V -> TPS767D301 -> 3.3V */
+	REGULATOR_SUPPLY("AVDD", "1-0018"),
+	REGULATOR_SUPPLY("DRVDD", "1-0018"),
+	REGULATOR_SUPPLY("IOVDD", "1-0018"),
+};
+
+static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
+	/* Baseboard 1.8V: 5V -> TPS767D301 -> 1.8V */
+	REGULATOR_SUPPLY("DVDD", "1-0018"),
+};
+
 static int dm365evm_keyscan_enable(struct device *dev)
 {
 	return davinci_cfg_reg(DM365_KEYSCAN);
@@ -800,6 +815,11 @@ static __init void dm365_evm_init(void)
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
+	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
+				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
+	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
+				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
+
 	nvmem_add_cell_table(&davinci_nvmem_cell_table);
 	nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1);
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -29,6 +29,8 @@
 #include <linux/v4l2-dv-timings.h>
 #include <linux/export.h>
 #include <linux/leds.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <media/i2c/tvp514x.h>
 
@@ -653,6 +655,19 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 };
 
+/* Fixed regulator support */
+static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
+	/* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
+	REGULATOR_SUPPLY("AVDD", "1-001b"),
+	REGULATOR_SUPPLY("DRVDD", "1-001b"),
+};
+
+static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
+	/* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
+	REGULATOR_SUPPLY("IOVDD", "1-001b"),
+	REGULATOR_SUPPLY("DVDD", "1-001b"),
+};
+
 #define DM644X_I2C_SDA_PIN	GPIO_TO_PIN(2, 12)
 #define DM644X_I2C_SCL_PIN	GPIO_TO_PIN(2, 11)
 
@@ -842,6 +857,11 @@ static __init void davinci_evm_init(void)
 
 	dm644x_register_clocks();
 
+	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
+				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
+	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
+				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
+
 	dm644x_init_devices();
 
 	ret = dm644x_gpio_register();

arch/arm/mach-davinci/devices-da8xx.c

@@ -21,7 +21,6 @@
 #include <mach/common.h>
 #include <mach/cputype.h>
 #include <mach/da8xx.h>
-#include <mach/time.h>
 
 #include "asp.h"
 #include "cpuidle.h"

arch/arm/mach-davinci/devices.c

@@ -17,7 +17,6 @@
 #include <mach/hardware.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
-#include <mach/time.h>
 
 #include "davinci.h"
 #include "irqs.h"
@@ -303,21 +302,3 @@ int davinci_gpio_register(struct resource *res, int size, void *pdata)
 	davinci_gpio_device.dev.platform_data = pdata;
 	return platform_device_register(&davinci_gpio_device);
 }
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-struct davinci_timer_instance davinci_timer_instance[2] = {
-	{
-		.base		= DAVINCI_TIMER0_BASE,
-		.bottom_irq	= DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12),
-		.top_irq	= DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34),
-	},
-	{
-		.base		= DAVINCI_TIMER1_BASE,
-		.bottom_irq	= DAVINCI_INTC_IRQ(IRQ_TINT1_TINT12),
-		.top_irq	= DAVINCI_INTC_IRQ(IRQ_TINT1_TINT34),
-	},
-};
-

arch/arm/mach-davinci/dm365.c

@@ -35,7 +35,8 @@
 #include <mach/cputype.h>
 #include <mach/mux.h>
 #include <mach/serial.h>
-#include <mach/time.h>
+
+#include <clocksource/timer-davinci.h>
 
 #include "asp.h"
 #include "davinci.h"
@@ -660,10 +661,16 @@ static struct davinci_id dm365_ids[] = {
 	},
 };
 
-static struct davinci_timer_info dm365_timer_info = {
-	.timers		= davinci_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
+/*
+ * Bottom half of timer0 is used for clockevent, top half is used for
+ * clocksource.
+ */
+static const struct davinci_timer_cfg dm365_timer_cfg = {
+	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_128),
+	.irq = {
+		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
+		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
+	},
 };
 
 #define DM365_UART1_BASE	(IO_PHYS + 0x106000)
@@ -723,7 +730,6 @@ static const struct davinci_soc_info davinci_soc_info_dm365 = {
 	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm365_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
-	.timer_info		= &dm365_timer_info,
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
@@ -771,6 +777,7 @@ void __init dm365_init_time(void)
 {
 	void __iomem *pll1, *pll2, *psc;
 	struct clk *clk;
+	int rv;
 
 	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ);
 
@@ -789,7 +796,8 @@ void __init dm365_init_time(void)
 		return;
 	}
 
-	davinci_timer_init(clk);
+	rv = davinci_timer_register(clk, &dm365_timer_cfg);
+	WARN(rv, "Unable to register the timer: %d\n", rv);
 }
 
 void __init dm365_register_clocks(void)

arch/arm/mach-davinci/include/mach/common.h

@@ -22,22 +22,6 @@
 #define DAVINCI_INTC_START		NR_IRQS
 #define DAVINCI_INTC_IRQ(_irqnum)	(DAVINCI_INTC_START + (_irqnum))
 
-void davinci_timer_init(struct clk *clk);
-
-struct davinci_timer_instance {
-	u32		base;
-	u32		bottom_irq;
-	u32		top_irq;
-	unsigned long	cmp_off;
-	unsigned int	cmp_irq;
-};
-
-struct davinci_timer_info {
-	struct davinci_timer_instance	*timers;
-	unsigned int			clockevent_id;
-	unsigned int			clocksource_id;
-};
-
 struct davinci_gpio_controller;
 
 /*
@@ -58,7 +42,6 @@ struct davinci_soc_info {
 	u32				pinmux_base;
 	const struct mux_config		*pinmux_pins;
 	unsigned long			pinmux_pins_num;
-	struct davinci_timer_info	*timer_info;
 	int				gpio_type;
 	u32				gpio_base;
 	unsigned			gpio_num;

arch/arm/mach-davinci/include/mach/time.h

-/*
- * Local header file for DaVinci time code.
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
-#define __ARCH_ARM_MACH_DAVINCI_TIME_H
-
-#define DAVINCI_TIMER1_BASE		(IO_PHYS + 0x21800)
-
-enum {
-	T0_BOT,
-	T0_TOP,
-	T1_BOT,
-	T1_TOP,
-	NUM_TIMERS
-};
-
-#define IS_TIMER1(id)		(id & 0x2)
-#define IS_TIMER0(id)		(!IS_TIMER1(id))
-#define IS_TIMER_TOP(id)	((id & 0x1))
-#define IS_TIMER_BOT(id)	(!IS_TIMER_TOP(id))
-
-#define ID_TO_TIMER(id)		(IS_TIMER1(id) != 0)
-
-extern struct davinci_timer_instance davinci_timer_instance[];
-
-#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */

arch/arm/mach-davinci/time.c

-/*
- * DaVinci timer subsystem
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/cputype.h>
-#include <mach/hardware.h>
-#include <mach/time.h>
-
-static struct clock_event_device clockevent_davinci;
-static unsigned int davinci_clock_tick_rate;
-
-/*
- * This driver configures the 2 64-bit count-up timers as 4 independent
- * 32-bit count-up timers used as follows:
- */
-
-enum {
-	TID_CLOCKEVENT,
-	TID_CLOCKSOURCE,
-};
-
-/* Timer register offsets */
-#define PID12			0x0
-#define TIM12			0x10
-#define TIM34			0x14
-#define PRD12			0x18
-#define PRD34			0x1c
-#define TCR			0x20
-#define TGCR			0x24
-#define WDTCR			0x28
-
-/* Offsets of the 8 compare registers */
-#define	CMP12_0			0x60
-#define	CMP12_1			0x64
-#define	CMP12_2			0x68
-#define	CMP12_3			0x6c
-#define	CMP12_4			0x70
-#define	CMP12_5			0x74
-#define	CMP12_6			0x78
-#define	CMP12_7			0x7c
-
-/* Timer register bitfields */
-#define TCR_ENAMODE_DISABLE          0x0
-#define TCR_ENAMODE_ONESHOT          0x1
-#define TCR_ENAMODE_PERIODIC         0x2
-#define TCR_ENAMODE_MASK             0x3
-
-#define TGCR_TIMMODE_SHIFT           2
-#define TGCR_TIMMODE_64BIT_GP        0x0
-#define TGCR_TIMMODE_32BIT_UNCHAINED 0x1
-#define TGCR_TIMMODE_64BIT_WDOG      0x2
-#define TGCR_TIMMODE_32BIT_CHAINED   0x3
-
-#define TGCR_TIM12RS_SHIFT           0
-#define TGCR_TIM34RS_SHIFT           1
-#define TGCR_RESET                   0x0
-#define TGCR_UNRESET                 0x1
-#define TGCR_RESET_MASK              0x3
-
-struct timer_s {
-	char *name;
-	unsigned int id;
-	unsigned long period;
-	unsigned long opts;
-	unsigned long flags;
-	void __iomem *base;
-	unsigned long tim_off;
-	unsigned long prd_off;
-	unsigned long enamode_shift;
-	struct irqaction irqaction;
-};
-static struct timer_s timers[];
-
-/* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED		0x01
-#define TIMER_OPTS_ONESHOT		0x02
-#define TIMER_OPTS_PERIODIC		0x04
-#define TIMER_OPTS_STATE_MASK		0x07
-
-#define TIMER_OPTS_USE_COMPARE		0x80000000
-#define USING_COMPARE(t)		((t)->opts & TIMER_OPTS_USE_COMPARE)
-
-static char *id_to_name[] = {
-	[T0_BOT]	= "timer0_0",
-	[T0_TOP]	= "timer0_1",
-	[T1_BOT]	= "timer1_0",
-	[T1_TOP]	= "timer1_1",
-};
-
-static int timer32_config(struct timer_s *t)
-{
-	u32 tcr;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	if (USING_COMPARE(t)) {
-		struct davinci_timer_instance *dtip =
-				soc_info->timer_info->timers;
-		int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
-
-		/*
-		 * Next interrupt should be the current time reg value plus
-		 * the new period (using 32-bit unsigned addition/wrapping
-		 * to 0 on overflow).  This assumes that the clocksource
-		 * is setup to count to 2^32-1 before wrapping around to 0.
-		 */
-		__raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
-			t->base + dtip[event_timer].cmp_off);
-	} else {
-		tcr = __raw_readl(t->base + TCR);
-
-		/* disable timer */
-		tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
-		__raw_writel(tcr, t->base + TCR);
-
-		/* reset counter to zero, set new period */
-		__raw_writel(0, t->base + t->tim_off);
-		__raw_writel(t->period, t->base + t->prd_off);
-
-		/* Set enable mode */
-		if (t->opts & TIMER_OPTS_ONESHOT)
-			tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
-		else if (t->opts & TIMER_OPTS_PERIODIC)
-			tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
-
-		__raw_writel(tcr, t->base + TCR);
-	}
-	return 0;
-}
-
-static inline u32 timer32_read(struct timer_s *t)
-{
-	return __raw_readl(t->base + t->tim_off);
-}
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_davinci;
-
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-/* called when 32-bit counter wraps */
-static irqreturn_t freerun_interrupt(int irq, void *dev_id)
-{
-	return IRQ_HANDLED;
-}
-
-static struct timer_s timers[] = {
-	[TID_CLOCKEVENT] = {
-		.name      = "clockevent",
-		.opts      = TIMER_OPTS_DISABLED,
-		.irqaction = {
-			.flags   = IRQF_TIMER,
-			.handler = timer_interrupt,
-		}
-	},
-	[TID_CLOCKSOURCE] = {
-		.name       = "free-run counter",
-		.period     = ~0,
-		.opts       = TIMER_OPTS_PERIODIC,
-		.irqaction = {
-			.flags   = IRQF_TIMER,
-			.handler = freerun_interrupt,
-		}
-	},
-};
-
-static void __init timer_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
-	void __iomem *base[2];
-	int i;
-
-	/* Global init of each 64-bit timer as a whole */
-	for(i=0; i<2; i++) {
-		u32 tgcr;
-
-		base[i] = ioremap(dtip[i].base, SZ_4K);
-		if (WARN_ON(!base[i]))
-			continue;
-
-		/* Disabled, Internal clock source */
-		__raw_writel(0, base[i] + TCR);
-
-		/* reset both timers, no pre-scaler for timer34 */
-		tgcr = 0;
-		__raw_writel(tgcr, base[i] + TGCR);
-
-		/* Set both timers to unchained 32-bit */
-		tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
-		__raw_writel(tgcr, base[i] + TGCR);
-
-		/* Unreset timers */
-		tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
-			(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-		__raw_writel(tgcr, base[i] + TGCR);
-
-		/* Init both counters to zero */
-		__raw_writel(0, base[i] + TIM12);
-		__raw_writel(0, base[i] + TIM34);
-	}
-
-	/* Init of each timer as a 32-bit timer */
-	for (i=0; i< ARRAY_SIZE(timers); i++) {
-		struct timer_s *t = &timers[i];
-		int timer = ID_TO_TIMER(t->id);
-		u32 irq;
-
-		t->base = base[timer];
-		if (!t->base)
-			continue;
-
-		if (IS_TIMER_BOT(t->id)) {
-			t->enamode_shift = 6;
-			t->tim_off = TIM12;
-			t->prd_off = PRD12;
-			irq = dtip[timer].bottom_irq;
-		} else {
-			t->enamode_shift = 22;
-			t->tim_off = TIM34;
-			t->prd_off = PRD34;
-			irq = dtip[timer].top_irq;
-		}
-
-		/* Register interrupt */
-		t->irqaction.name = t->name;
-		t->irqaction.dev_id = (void *)t;
-
-		if (t->irqaction.handler != NULL) {
-			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
-			setup_irq(irq, &t->irqaction);
-		}
-	}
-}
-
-/*
- * clocksource
- */
-static u64 read_cycles(struct clocksource *cs)
-{
-	struct timer_s *t = &timers[TID_CLOCKSOURCE];
-
-	return (cycles_t)timer32_read(t);
-}
-
-static struct clocksource clocksource_davinci = {
-	.rating		= 300,
-	.read		= read_cycles,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * Overwrite weak default sched_clock with something more precise
- */
-static u64 notrace davinci_read_sched_clock(void)
-{
-	return timer32_read(&timers[TID_CLOCKSOURCE]);
-}
-
-/*
- * clockevent
- */
-static int davinci_set_next_event(unsigned long cycles,
-				  struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	t->period = cycles;
-	timer32_config(t);
-	return 0;
-}
-
-static int davinci_shutdown(struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	t->opts &= ~TIMER_OPTS_STATE_MASK;
-	t->opts |= TIMER_OPTS_DISABLED;
-	return 0;
-}
-
-static int davinci_set_oneshot(struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	t->opts &= ~TIMER_OPTS_STATE_MASK;
-	t->opts |= TIMER_OPTS_ONESHOT;
-	return 0;
-}
-
-static int davinci_set_periodic(struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	t->period = davinci_clock_tick_rate / (HZ);
-	t->opts &= ~TIMER_OPTS_STATE_MASK;
-	t->opts |= TIMER_OPTS_PERIODIC;
-	timer32_config(t);
-	return 0;
-}
-
-static struct clock_event_device clockevent_davinci = {
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event		= davinci_set_next_event,
-	.set_state_shutdown	= davinci_shutdown,
-	.set_state_periodic	= davinci_set_periodic,
-	.set_state_oneshot	= davinci_set_oneshot,
-};
-
-void __init davinci_timer_init(struct clk *timer_clk)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	unsigned int clockevent_id;
-	unsigned int clocksource_id;
-	int i;
-
-	clockevent_id = soc_info->timer_info->clockevent_id;
-	clocksource_id = soc_info->timer_info->clocksource_id;
-
-	timers[TID_CLOCKEVENT].id = clockevent_id;
-	timers[TID_CLOCKSOURCE].id = clocksource_id;
-
-	/*
-	 * If using same timer for both clock events & clocksource,
-	 * a compare register must be used to generate an event interrupt.
-	 * This is equivalent to a oneshot timer only (not periodic).
-	 */
-	if (clockevent_id == clocksource_id) {
-		struct davinci_timer_instance *dtip =
-				soc_info->timer_info->timers;
-		int event_timer = ID_TO_TIMER(clockevent_id);
-
-		/* Only bottom timers can use compare regs */
-		if (IS_TIMER_TOP(clockevent_id))
-			pr_warn("%s: Invalid use of system timers.  Results unpredictable.\n",
-				__func__);
-		else if ((dtip[event_timer].cmp_off == 0)
-				|| (dtip[event_timer].cmp_irq == 0))
-			pr_warn("%s: Invalid timer instance setup.  Results unpredictable.\n",
-				__func__);
-		else {
-			timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
-			clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
-		}
-	}
-
-	BUG_ON(IS_ERR(timer_clk));
-	clk_prepare_enable(timer_clk);
-
-	/* init timer hw */
-	timer_init();
-
-	davinci_clock_tick_rate = clk_get_rate(timer_clk);
-
-	/* setup clocksource */
-	clocksource_davinci.name = id_to_name[clocksource_id];
-	if (clocksource_register_hz(&clocksource_davinci,
-				    davinci_clock_tick_rate))
-		pr_err("%s: can't register clocksource!\n",
-		       clocksource_davinci.name);
-
-	sched_clock_register(davinci_read_sched_clock, 32,
-			  davinci_clock_tick_rate);
-
-	/* setup clockevent */
-	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
-
-	clockevent_davinci.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&clockevent_davinci,
-					davinci_clock_tick_rate, 1, 0xfffffffe);
-
-	for (i=0; i< ARRAY_SIZE(timers); i++)
-		timer32_config(&timers[i]);
-}

arch/arm/mach-omap2/clockdomains7xx_data.c

@@ -606,7 +606,7 @@ static struct clockdomain cam_7xx_clkdm = {
 	.dep_bit	  = DRA7XX_CAM_STATDEP_SHIFT,
 	.wkdep_srcs	  = cam_wkup_sleep_deps,
 	.sleepdep_srcs	  = cam_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain l4per_7xx_clkdm = {

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -653,32 +653,6 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = {
 	.opt_clks_cnt	= ARRAY_SIZE(dss_venc_opt_clks),
 };
 
-/* sha0 HIB2 (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig omap44xx_sha0_sysc = {
-	.rev_offs	= 0x100,
-	.sysc_offs	= 0x110,
-	.syss_offs	= 0x114,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class omap44xx_sha0_hwmod_class = {
-	.name		= "sham",
-	.sysc		= &omap44xx_sha0_sysc,
-};
-
-static struct omap_hwmod omap44xx_sha0_hwmod = {
-	.name		= "sham",
-	.class		= &omap44xx_sha0_hwmod_class,
-	.clkdm_name	= "l4_secure_clkdm",
-	.main_clk	= "l3_div_ck",
-	.prcm		= {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
 
 
 /*
@@ -727,103 +701,6 @@ static struct omap_hwmod omap44xx_emif2_hwmod = {
 	},
 };
 
-/*
-    Crypto modules AES0/1 belong to:
-	PD_L4_PER power domain
-	CD_L4_SEC clock domain
-	On the L3, the AES modules are mapped to
-	L3_CLK2: Peripherals and multimedia sub clock domain
-*/
-static struct omap_hwmod_class_sysconfig omap44xx_aes_sysc = {
-	.rev_offs	= 0x80,
-	.sysc_offs	= 0x84,
-	.syss_offs	= 0x88,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class omap44xx_aes_hwmod_class = {
-	.name		= "aes",
-	.sysc		= &omap44xx_aes_sysc,
-};
-
-static struct omap_hwmod omap44xx_aes1_hwmod = {
-	.name		= "aes1",
-	.class		= &omap44xx_aes_hwmod_class,
-	.clkdm_name	= "l4_secure_clkdm",
-	.main_clk	= "l3_div_ck",
-	.prcm		= {
-		.omap4	= {
-			.context_offs	= OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET,
-			.clkctrl_offs	= OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__aes1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_aes1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap44xx_aes2_hwmod = {
-	.name		= "aes2",
-	.class		= &omap44xx_aes_hwmod_class,
-	.clkdm_name	= "l4_secure_clkdm",
-	.main_clk	= "l3_div_ck",
-	.prcm		= {
-		.omap4	= {
-			.context_offs	= OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET,
-			.clkctrl_offs	= OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__aes2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_aes2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
- * 'des' class for DES3DES module
- */
-static struct omap_hwmod_class_sysconfig omap44xx_des_sysc = {
-	.rev_offs	= 0x30,
-	.sysc_offs	= 0x34,
-	.syss_offs	= 0x38,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class omap44xx_des_hwmod_class = {
-	.name		= "des",
-	.sysc		= &omap44xx_des_sysc,
-};
-
-static struct omap_hwmod omap44xx_des_hwmod = {
-	.name		= "des",
-	.class		= &omap44xx_des_hwmod_class,
-	.clkdm_name	= "l4_secure_clkdm",
-	.main_clk	= "l3_div_ck",
-	.prcm		= {
-		.omap4	= {
-			.context_offs	= OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET,
-			.clkctrl_offs	= OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_des_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /*
  * 'gpmc' class
  * general purpose memory controller
@@ -1735,14 +1612,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l3_main_2 -> sham */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sha0 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_sha0_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_2 -> gpmc */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
 	.master		= &omap44xx_l3_main_2_hwmod,
@@ -1958,10 +1827,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__usb_tll_hs,
 	&omap44xx_mpu__emif1,
 	&omap44xx_mpu__emif2,
-	&omap44xx_l3_main_2__aes1,
-	&omap44xx_l3_main_2__aes2,
-	&omap44xx_l3_main_2__des,
-	&omap44xx_l3_main_2__sha0,
 	NULL,
 };
 

drivers/clk/ti/clk-44xx.c

@@ -604,6 +604,18 @@ static const struct omap_clkctrl_reg_data omap4_l4_per_clkctrl_regs[] __initcons
 	{ 0 },
 };
 
+static const struct
+omap_clkctrl_reg_data omap4_l4_secure_clkctrl_regs[] __initconst = {
+	{ OMAP4_AES1_CLKCTRL, NULL, CLKF_SW_SUP, "" },
+	{ OMAP4_AES2_CLKCTRL, NULL, CLKF_SW_SUP, "" },
+	{ OMAP4_DES3DES_CLKCTRL, NULL, CLKF_SW_SUP, "" },
+	{ OMAP4_PKA_CLKCTRL, NULL, CLKF_SW_SUP, "" },
+	{ OMAP4_RNG_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_SOC_NONSEC, "" },
+	{ OMAP4_SHA2MD5_CLKCTRL, NULL, CLKF_SW_SUP, "" },
+	{ OMAP4_CRYPTODMA_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_SOC_NONSEC, "" },
+	{ 0 },
+};
+
 static const struct omap_clkctrl_bit_data omap4_gpio1_bit_data[] __initconst = {
 	{ 8, TI_CLK_GATE, omap4_gpio2_dbclk_parents, NULL },
 	{ 0 },
@@ -691,6 +703,7 @@ const struct omap_clkctrl_data omap4_clkctrl_data[] __initconst = {
 	{ 0x4a009220, omap4_l3_gfx_clkctrl_regs },
 	{ 0x4a009320, omap4_l3_init_clkctrl_regs },
 	{ 0x4a009420, omap4_l4_per_clkctrl_regs },
+	{ 0x4a0095a0, omap4_l4_secure_clkctrl_regs },
 	{ 0x4a307820, omap4_l4_wkup_clkctrl_regs },
 	{ 0x4a307a20, omap4_emu_sys_clkctrl_regs },
 	{ 0 },

drivers/clk/ti/clk-54xx.c

@@ -301,6 +301,18 @@ static const struct omap_clkctrl_reg_data omap5_l4per_clkctrl_regs[] __initconst
 	{ 0 },
 };
 
+static const struct
+omap_clkctrl_reg_data omap5_l4_secure_clkctrl_regs[] __initconst = {
+	{ OMAP5_AES1_CLKCTRL, NULL, CLKF_HW_SUP, "" },
+	{ OMAP5_AES2_CLKCTRL, NULL, CLKF_HW_SUP, "" },
+	{ OMAP5_DES3DES_CLKCTRL, NULL, CLKF_HW_SUP, "" },
+	{ OMAP5_FPKA_CLKCTRL, NULL, CLKF_SW_SUP, "" },
+	{ OMAP5_RNG_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_SOC_NONSEC, "" },
+	{ OMAP5_SHA2MD5_CLKCTRL, NULL, CLKF_HW_SUP, "" },
+	{ OMAP5_DMA_CRYPTO_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_SOC_NONSEC, "" },
+	{ 0 },
+};
+
 static const struct omap_clkctrl_reg_data omap5_iva_clkctrl_regs[] __initconst = {
 	{ OMAP5_IVA_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_iva_h12x2_ck" },
 	{ OMAP5_SL2IF_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_iva_h12x2_ck" },
@@ -523,6 +535,7 @@ const struct omap_clkctrl_data omap5_clkctrl_data[] __initconst = {
 	{ 0x4a008d20, omap5_l4cfg_clkctrl_regs },
 	{ 0x4a008e20, omap5_l3instr_clkctrl_regs },
 	{ 0x4a009020, omap5_l4per_clkctrl_regs },
+	{ 0x4a0091a0, omap5_l4_secure_clkctrl_regs },
 	{ 0x4a009220, omap5_iva_clkctrl_regs },
 	{ 0x4a009420, omap5_dss_clkctrl_regs },
 	{ 0x4a009520, omap5_gpu_clkctrl_regs },

drivers/clocksource/timer-davinci.c

@@ -302,10 +302,6 @@ int __init davinci_timer_register(struct clk *clk,
 		return rv;
 	}
 
-	clockevents_config_and_register(&clockevent->dev, tick_rate,
-					DAVINCI_TIMER_MIN_DELTA,
-					DAVINCI_TIMER_MAX_DELTA);
-
 	davinci_clocksource.dev.rating = 300;
 	davinci_clocksource.dev.read = davinci_clocksource_read;
 	davinci_clocksource.dev.mask =
@@ -323,6 +319,10 @@ int __init davinci_timer_register(struct clk *clk,
 		davinci_clocksource_init_tim34(base);
 	}
 
+	clockevents_config_and_register(&clockevent->dev, tick_rate,
+					DAVINCI_TIMER_MIN_DELTA,
+					DAVINCI_TIMER_MAX_DELTA);
+
 	rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate);
 	if (rv) {
 		pr_err("Unable to register clocksource");

include/dt-bindings/clock/omap4.h

@@ -124,6 +124,17 @@
 #define OMAP4_UART4_CLKCTRL	OMAP4_CLKCTRL_INDEX(0x158)
 #define OMAP4_MMC5_CLKCTRL	OMAP4_CLKCTRL_INDEX(0x160)
 
+/* l4_secure clocks */
+#define OMAP4_L4_SECURE_CLKCTRL_OFFSET	0x1a0
+#define OMAP4_L4_SECURE_CLKCTRL_INDEX(offset)	((offset) - OMAP4_L4_SECURE_CLKCTRL_OFFSET)
+#define OMAP4_AES1_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1a0)
+#define OMAP4_AES2_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1a8)
+#define OMAP4_DES3DES_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1b0)
+#define OMAP4_PKA_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1b8)
+#define OMAP4_RNG_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1c0)
+#define OMAP4_SHA2MD5_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1c8)
+#define OMAP4_CRYPTODMA_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1d8)
+
 /* l4_wkup clocks */
 #define OMAP4_L4_WKUP_CLKCTRL	OMAP4_CLKCTRL_INDEX(0x20)
 #define OMAP4_WD_TIMER2_CLKCTRL	OMAP4_CLKCTRL_INDEX(0x30)

include/dt-bindings/clock/omap5.h

@@ -87,6 +87,17 @@
 #define OMAP5_UART5_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x170)
 #define OMAP5_UART6_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x178)
 
+/* l4_secure clocks */
+#define OMAP5_L4_SECURE_CLKCTRL_OFFSET	0x1a0
+#define OMAP5_L4_SECURE_CLKCTRL_INDEX(offset)	((offset) - OMAP5_L4_SECURE_CLKCTRL_OFFSET)
+#define OMAP5_AES1_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1a0)
+#define OMAP5_AES2_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1a8)
+#define OMAP5_DES3DES_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1b0)
+#define OMAP5_FPKA_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1b8)
+#define OMAP5_RNG_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1c0)
+#define OMAP5_SHA2MD5_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1c8)
+#define OMAP5_DMA_CRYPTO_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1d8)
+
 /* iva clocks */
 #define OMAP5_IVA_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x20)
 #define OMAP5_SL2IF_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x28)