[SCSI] Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when...

[SCSI] Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low."

This reverts commit 3c290d0bSigned-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_def.h

@@ -2734,7 +2734,6 @@ struct req_que {
 	srb_t **outstanding_cmds;
 	uint32_t current_outstanding_cmd;
 	uint16_t num_outstanding_cmds;
-#define	MAX_Q_DEPTH		32
 	int max_q_depth;
 
 	dma_addr_t  dma_fx00;
@@ -3303,12 +3302,6 @@ struct qla_hw_data {
 	struct work_struct idc_state_handler;
 	struct work_struct nic_core_unrecoverable;
 
-#define HOST_QUEUE_RAMPDOWN_INTERVAL           (60 * HZ)
-#define HOST_QUEUE_RAMPUP_INTERVAL             (30 * HZ)
-	unsigned long   host_last_rampdown_time;
-	unsigned long   host_last_rampup_time;
-	int             cfg_lun_q_depth;
-
 	struct mr_data_fx00 mr;
 
 	struct qlt_hw_data tgt;
@@ -3372,12 +3365,10 @@ typedef struct scsi_qla_host {
 #define MPI_RESET_NEEDED	19	/* Initiate MPI FW reset */
 #define ISP_QUIESCE_NEEDED	20	/* Driver need some quiescence */
 #define SCR_PENDING		21	/* SCR in target mode */
-#define HOST_RAMP_DOWN_QUEUE_DEPTH     22
-#define HOST_RAMP_UP_QUEUE_DEPTH       23
-#define PORT_UPDATE_NEEDED	24
-#define FX00_RESET_RECOVERY	25
-#define FX00_TARGET_SCAN	26
-#define FX00_CRITEMP_RECOVERY	27
+#define PORT_UPDATE_NEEDED	22
+#define FX00_RESET_RECOVERY	23
+#define FX00_TARGET_SCAN	24
+#define FX00_CRITEMP_RECOVERY	25
 
 	uint32_t	device_flags;
 #define SWITCH_FOUND		BIT_0

drivers/scsi/qla2xxx/qla_gbl.h

@@ -98,7 +98,6 @@ extern int qlport_down_retry;
 extern int ql2xplogiabsentdevice;
 extern int ql2xloginretrycount;
 extern int ql2xfdmienable;
-extern int ql2xmaxqdepth;
 extern int ql2xallocfwdump;
 extern int ql2xextended_error_logging;
 extern int ql2xiidmaenable;

drivers/scsi/qla2xxx/qla_inline.h

@@ -260,25 +260,6 @@ qla2x00_gid_list_size(struct qla_hw_data *ha)
 		return sizeof(struct gid_list_info) * ha->max_fibre_devices;
 }
 
-static inline void
-qla2x00_do_host_ramp_up(scsi_qla_host_t *vha)
-{
-	if (vha->hw->cfg_lun_q_depth >= ql2xmaxqdepth)
-		return;
-
-	/* Wait at least HOST_QUEUE_RAMPDOWN_INTERVAL before ramping up */
-	if (time_before(jiffies, (vha->hw->host_last_rampdown_time +
-	    HOST_QUEUE_RAMPDOWN_INTERVAL)))
-		return;
-
-	/* Wait at least HOST_QUEUE_RAMPUP_INTERVAL between each ramp up */
-	if (time_before(jiffies, (vha->hw->host_last_rampup_time +
-	    HOST_QUEUE_RAMPUP_INTERVAL)))
-		return;
-
-	set_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags);
-}
-
 static inline void
 qla2x00_handle_mbx_completion(struct qla_hw_data *ha, int status)
 {

drivers/scsi/qla2xxx/qla_isr.c

@@ -1991,7 +1991,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 
 	/* Fast path completion. */
 	if (comp_status == CS_COMPLETE && scsi_status == 0) {
-		qla2x00_do_host_ramp_up(vha);
 		qla2x00_process_completed_request(vha, req, handle);
 
 		return;
@@ -2250,9 +2249,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		    cp->cmnd, scsi_bufflen(cp), rsp_info_len,
 		    resid_len, fw_resid_len);
 
-	if (!res)
-		qla2x00_do_host_ramp_up(vha);
-
 	if (rsp->status_srb == NULL)
 		sp->done(ha, sp, res);
 }

drivers/scsi/qla2xxx/qla_mr.c

@@ -2419,7 +2419,6 @@ qlafx00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 
 	/* Fast path completion. */
 	if (comp_status == CS_COMPLETE && scsi_status == 0) {
-		qla2x00_do_host_ramp_up(vha);
 		qla2x00_process_completed_request(vha, req, handle);
 		return;
 	}
@@ -2630,9 +2629,6 @@ qlafx00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		    rsp_info_len, resid_len, fw_resid_len, sense_len,
 		    par_sense_len, rsp_info_len);
 
-	if (!res)
-		qla2x00_do_host_ramp_up(vha);
-
 	if (rsp->status_srb == NULL)
 		sp->done(ha, sp, res);
 }

drivers/scsi/qla2xxx/qla_os.c

@@ -110,7 +110,8 @@ MODULE_PARM_DESC(ql2xfdmienable,
 		"Enables FDMI registrations. "
 		"0 - no FDMI. Default is 1 - perform FDMI.");
 
-int ql2xmaxqdepth = MAX_Q_DEPTH;
+#define MAX_Q_DEPTH	32
+static int ql2xmaxqdepth = MAX_Q_DEPTH;
 module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xmaxqdepth,
 		"Maximum queue depth to set for each LUN. "
@@ -728,10 +729,8 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	}
 
 	sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC);
-	if (!sp) {
-		set_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags);
+	if (!sp)
 		goto qc24_host_busy;
-	}
 
 	sp->u.scmd.cmd = cmd;
 	sp->type = SRB_SCSI_CMD;
@@ -744,7 +743,6 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	if (rval != QLA_SUCCESS) {
 		ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3013,
 		    "Start scsi failed rval=%d for cmd=%p.\n", rval, cmd);
-		set_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags);
 		goto qc24_host_busy_free_sp;
 	}
 
@@ -1474,81 +1472,6 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
 	return tag_type;
 }
 
-static void
-qla2x00_host_ramp_down_queuedepth(scsi_qla_host_t *vha)
-{
-	scsi_qla_host_t *vp;
-	struct Scsi_Host *shost;
-	struct scsi_device *sdev;
-	struct qla_hw_data *ha = vha->hw;
-	unsigned long flags;
-
-	ha->host_last_rampdown_time = jiffies;
-
-	if (ha->cfg_lun_q_depth <= vha->host->cmd_per_lun)
-		return;
-
-	if ((ha->cfg_lun_q_depth / 2) < vha->host->cmd_per_lun)
-		ha->cfg_lun_q_depth = vha->host->cmd_per_lun;
-	else
-		ha->cfg_lun_q_depth = ha->cfg_lun_q_depth / 2;
-
-	/*
-	 * Geometrically ramp down the queue depth for all devices on this
-	 * adapter
-	 */
-	spin_lock_irqsave(&ha->vport_slock, flags);
-	list_for_each_entry(vp, &ha->vp_list, list) {
-		shost = vp->host;
-		shost_for_each_device(sdev, shost) {
-			if (sdev->queue_depth > shost->cmd_per_lun) {
-				if (sdev->queue_depth < ha->cfg_lun_q_depth)
-					continue;
-				ql_dbg(ql_dbg_io, vp, 0x3031,
-				    "%ld:%d:%d: Ramping down queue depth to %d",
-				    vp->host_no, sdev->id, sdev->lun,
-				    ha->cfg_lun_q_depth);
-				qla2x00_change_queue_depth(sdev,
-				    ha->cfg_lun_q_depth, SCSI_QDEPTH_DEFAULT);
-			}
-		}
-	}
-	spin_unlock_irqrestore(&ha->vport_slock, flags);
-
-	return;
-}
-
-static void
-qla2x00_host_ramp_up_queuedepth(scsi_qla_host_t *vha)
-{
-	scsi_qla_host_t *vp;
-	struct Scsi_Host *shost;
-	struct scsi_device *sdev;
-	struct qla_hw_data *ha = vha->hw;
-	unsigned long flags;
-
-	ha->host_last_rampup_time = jiffies;
-	ha->cfg_lun_q_depth++;
-
-	/*
-	 * Linearly ramp up the queue depth for all devices on this
-	 * adapter
-	 */
-	spin_lock_irqsave(&ha->vport_slock, flags);
-	list_for_each_entry(vp, &ha->vp_list, list) {
-		shost = vp->host;
-		shost_for_each_device(sdev, shost) {
-			if (sdev->queue_depth > ha->cfg_lun_q_depth)
-				continue;
-			qla2x00_change_queue_depth(sdev, ha->cfg_lun_q_depth,
-			    SCSI_QDEPTH_RAMP_UP);
-		}
-	}
-	spin_unlock_irqrestore(&ha->vport_slock, flags);
-
-	return;
-}
-
 /**
  * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
  * @ha: HA context
@@ -2424,7 +2347,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ha->init_cb_size = sizeof(init_cb_t);
 	ha->link_data_rate = PORT_SPEED_UNKNOWN;
 	ha->optrom_size = OPTROM_SIZE_2300;
-	ha->cfg_lun_q_depth = ql2xmaxqdepth;
 
 	/* Assign ISP specific operations. */
 	if (IS_QLA2100(ha)) {
@@ -4994,17 +4916,6 @@ qla2x00_do_dpc(void *data)
 			qla2xxx_flash_npiv_conf(base_vha);
 		}
 
-		if (test_and_clear_bit(HOST_RAMP_DOWN_QUEUE_DEPTH,
-		    &base_vha->dpc_flags)) {
-			/* Prevents simultaneous ramp up and down */
-			clear_bit(HOST_RAMP_UP_QUEUE_DEPTH,
-			    &base_vha->dpc_flags);
-			qla2x00_host_ramp_down_queuedepth(base_vha);
-		}
-
-		if (test_and_clear_bit(HOST_RAMP_UP_QUEUE_DEPTH,
-		    &base_vha->dpc_flags))
-			qla2x00_host_ramp_up_queuedepth(base_vha);
 intr_on_check:
 		if (!ha->interrupts_on)
 			ha->isp_ops->enable_intrs(ha);
@@ -5186,7 +5097,6 @@ qla2x00_timer(scsi_qla_host_t *vha)
 		    "Loop down - seconds remaining %d.\n",
 		    atomic_read(&vha->loop_down_timer));
 	}
-
 	/* Check if beacon LED needs to be blinked for physical host only */
 	if (!vha->vp_idx && (ha->beacon_blink_led == 1)) {
 		/* There is no beacon_blink function for ISP82xx */
@@ -5210,9 +5120,7 @@ qla2x00_timer(scsi_qla_host_t *vha)
 	    test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) ||
 	    test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) ||
 	    test_bit(VP_DPC_NEEDED, &vha->dpc_flags) ||
-	    test_bit(RELOGIN_NEEDED, &vha->dpc_flags) ||
-	    test_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags) ||
-	    test_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags))) {
+	    test_bit(RELOGIN_NEEDED, &vha->dpc_flags))) {
 		ql_dbg(ql_dbg_timer, vha, 0x600b,
 		    "isp_abort_needed=%d loop_resync_needed=%d "
 		    "fcport_update_needed=%d start_dpc=%d "
@@ -5225,15 +5133,12 @@ qla2x00_timer(scsi_qla_host_t *vha)
 		ql_dbg(ql_dbg_timer, vha, 0x600c,
 		    "beacon_blink_needed=%d isp_unrecoverable=%d "
 		    "fcoe_ctx_reset_needed=%d vp_dpc_needed=%d "
-		    "relogin_needed=%d, host_ramp_down_needed=%d "
-		    "host_ramp_up_needed=%d.\n",
+		    "relogin_needed=%d.\n",
 		    test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags),
 		    test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags),
 		    test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags),
 		    test_bit(VP_DPC_NEEDED, &vha->dpc_flags),
-		    test_bit(RELOGIN_NEEDED, &vha->dpc_flags),
-		    test_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags),
-		    test_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags));
+		    test_bit(RELOGIN_NEEDED, &vha->dpc_flags));
 		qla2xxx_wake_dpc(vha);
 	}