PCI: tegra: Use physical range for I/O mapping

Commit 0b0b0893 ("of/pci: Fix the conversion of IO ranges into IO
resources") changed how I/O resources are parsed from DT.  Rather than
containing the physical address of the I/O region, the addresses will now
be in I/O address space.

On Tegra the union of all ranges is used to expose a top-level memory-
mapped resource for the PCI host bridge.  This helps to make /proc/iomem
more readable.

Combining both of the above, the union would now include the I/O space
region.  This causes a regression on Tegra20, where the physical base
address of the PCIe controller (and therefore of the union) is located at
physical address 0x80000000.  Since I/O space starts at 0, the union will
now include all of system RAM which starts at 0x00000000.

This commit fixes this by keeping two copies of the I/O range: one that
represents the range in the CPU's physical address space, the other for the
range in the I/O address space.  This allows the translation setup within
the driver to reuse the physical addresses.  The code registering the I/O
region with the PCI core uses both ranges to establish the mapping.

Fixes: 0b0b0893 ("of/pci: Fix the conversion of IO ranges into IO resources")
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

drivers/pci/host/pci-tegra.c

@@ -276,6 +276,7 @@ struct tegra_pcie {
 
 	struct resource all;
 	struct resource io;
+	struct resource pio;
 	struct resource mem;
 	struct resource prefetch;
 	struct resource busn;
@@ -658,7 +659,6 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct tegra_pcie *pcie = sys_to_pcie(sys);
 	int err;
-	phys_addr_t io_start;
 
 	err = devm_request_resource(pcie->dev, &pcie->all, &pcie->mem);
 	if (err < 0)
@@ -668,14 +668,12 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 	if (err)
 		return err;
 
-	io_start = pci_pio_to_address(pcie->io.start);
-
 	pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &pcie->prefetch,
 				sys->mem_offset);
 	pci_add_resource(&sys->resources, &pcie->busn);
 
-	pci_ioremap_io(nr * SZ_64K, io_start);
+	pci_ioremap_io(pcie->pio.start, pcie->io.start);
 
 	return 1;
 }
@@ -786,7 +784,6 @@ static irqreturn_t tegra_pcie_isr(int irq, void *arg)
 static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
 {
 	u32 fpci_bar, size, axi_address;
-	phys_addr_t io_start = pci_pio_to_address(pcie->io.start);
 
 	/* Bar 0: type 1 extended configuration space */
 	fpci_bar = 0xfe100000;
@@ -799,7 +796,7 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
 	/* Bar 1: downstream IO bar */
 	fpci_bar = 0xfdfc0000;
 	size = resource_size(&pcie->io);
-	axi_address = io_start;
+	axi_address = pcie->io.start;
 	afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
 	afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
 	afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
@@ -1690,8 +1687,23 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 
 		switch (res.flags & IORESOURCE_TYPE_BITS) {
 		case IORESOURCE_IO:
-			memcpy(&pcie->io, &res, sizeof(res));
-			pcie->io.name = np->full_name;
+			memcpy(&pcie->pio, &res, sizeof(res));
+			pcie->pio.name = np->full_name;
+
+			/*
+			 * The Tegra PCIe host bridge uses this to program the
+			 * mapping of the I/O space to the physical address,
+			 * so we override the .start and .end fields here that
+			 * of_pci_range_to_resource() converted to I/O space.
+			 * We also set the IORESOURCE_MEM type to clarify that
+			 * the resource is in the physical memory space.
+			 */
+			pcie->io.start = range.cpu_addr;
+			pcie->io.end = range.cpu_addr + range.size - 1;
+			pcie->io.flags = IORESOURCE_MEM;
+			pcie->io.name = "I/O";
+
+			memcpy(&res, &pcie->io, sizeof(res));
 			break;
 
 		case IORESOURCE_MEM: