[PATCH] ide: cleanup ide.h

Remove:
* stale comment
* unused HOST() macro
* unused ata_{error,control}_t types
* unused atapi_select_t type
* ide_init_subdrivers() prototype
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent d36fef6f
...@@ -23,17 +23,6 @@ ...@@ -23,17 +23,6 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/semaphore.h> #include <asm/semaphore.h>
/*
* This is the multiple IDE interface driver, as evolved from hd.c.
* It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15).
* There can be up to two drives per interface, as per the ATA-2 spec.
*
* Primary i/f: ide0: major=3; (hda) minor=0; (hdb) minor=64
* Secondary i/f: ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64
* Tertiary i/f: ide2: major=33; (hde) minor=0; (hdf) minor=64
* Quaternary i/f: ide3: major=34; (hdg) minor=0; (hdh) minor=64
*/
/****************************************************************************** /******************************************************************************
* IDE driver configuration options (play with these as desired): * IDE driver configuration options (play with these as desired):
* *
...@@ -193,11 +182,6 @@ typedef unsigned char byte; /* used everywhere */ ...@@ -193,11 +182,6 @@ typedef unsigned char byte; /* used everywhere */
#define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */ #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */ #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
#define HOST(hwif,chipset) \
{ \
return ((hwif)->chipset == chipset) ? 1 : 0; \
}
/* /*
* Check for an interrupt and acknowledge the interrupt status * Check for an interrupt and acknowledge the interrupt status
*/ */
...@@ -390,45 +374,6 @@ typedef union { ...@@ -390,45 +374,6 @@ typedef union {
} b; } b;
} ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t; } ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
/*
* ATA-IDE Error Register
*
* mark : Bad address mark
* tzero : Couldn't find track 0
* abrt : Aborted Command
* mcr : Media Change Request
* id : ID field not found
* mce : Media Change Event
* ecc : Uncorrectable ECC error
* bdd : dual meaing
*/
typedef union {
unsigned all :8;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
unsigned mark :1;
unsigned tzero :1;
unsigned abrt :1;
unsigned mcr :1;
unsigned id :1;
unsigned mce :1;
unsigned ecc :1;
unsigned bdd :1;
#elif defined(__BIG_ENDIAN_BITFIELD)
unsigned bdd :1;
unsigned ecc :1;
unsigned mce :1;
unsigned id :1;
unsigned mcr :1;
unsigned abrt :1;
unsigned tzero :1;
unsigned mark :1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} ata_error_t;
/* /*
* ATA-IDE Select Register, aka Device-Head * ATA-IDE Select Register, aka Device-Head
* *
...@@ -503,39 +448,6 @@ typedef union { ...@@ -503,39 +448,6 @@ typedef union {
} b; } b;
} ata_status_t, atapi_status_t; } ata_status_t, atapi_status_t;
/*
* ATA-IDE Control Register
*
* bit0 : Should be set to zero
* nIEN : device INTRQ to host
* SRST : host soft reset bit
* bit3 : ATA-2 thingy, Should be set to 1
* reserved456 : Reserved
* HOB : 48-bit address ordering, High Ordered Bit
*/
typedef union {
unsigned all : 8;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
unsigned bit0 : 1;
unsigned nIEN : 1;
unsigned SRST : 1;
unsigned bit3 : 1;
unsigned reserved456 : 3;
unsigned HOB : 1;
#elif defined(__BIG_ENDIAN_BITFIELD)
unsigned HOB : 1;
unsigned reserved456 : 3;
unsigned bit3 : 1;
unsigned SRST : 1;
unsigned nIEN : 1;
unsigned bit0 : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} ata_control_t;
/* /*
* ATAPI Feature Register * ATAPI Feature Register
* *
...@@ -617,39 +529,6 @@ typedef union { ...@@ -617,39 +529,6 @@ typedef union {
} b; } b;
} atapi_error_t; } atapi_error_t;
/*
* ATAPI floppy Drive Select Register
*
* sam_lun : Logical unit number
* reserved3 : Reserved
* drv : The responding drive will be drive 0 (0) or drive 1 (1)
* one5 : Should be set to 1
* reserved6 : Reserved
* one7 : Should be set to 1
*/
typedef union {
unsigned all :8;
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
unsigned sam_lun :3;
unsigned reserved3 :1;
unsigned drv :1;
unsigned one5 :1;
unsigned reserved6 :1;
unsigned one7 :1;
#elif defined(__BIG_ENDIAN_BITFIELD)
unsigned one7 :1;
unsigned reserved6 :1;
unsigned one5 :1;
unsigned drv :1;
unsigned reserved3 :1;
unsigned sam_lun :3;
#else
#error "Please fix <asm/byteorder.h>"
#endif
} b;
} atapi_select_t;
/* /*
* Status returned from various ide_ functions * Status returned from various ide_ functions
*/ */
...@@ -1298,7 +1177,6 @@ extern int ide_spin_wait_hwgroup(ide_drive_t *); ...@@ -1298,7 +1177,6 @@ extern int ide_spin_wait_hwgroup(ide_drive_t *);
extern void ide_timer_expiry(unsigned long); extern void ide_timer_expiry(unsigned long);
extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs); extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs);
extern void do_ide_request(request_queue_t *); extern void do_ide_request(request_queue_t *);
extern void ide_init_subdrivers(void);
void ide_init_disk(struct gendisk *, ide_drive_t *); void ide_init_disk(struct gendisk *, ide_drive_t *);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment