Commit 51ba902a authored by Aviad Krawczyk's avatar Aviad Krawczyk Committed by David S. Miller

net-next/hinic: Initialize hw interface

Initialize hw interface as part of the nic initialization for accessing hw.
Signed-off-by: default avatarAviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: default avatarZhao Chen <zhaochen6@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 89c9c163
Linux Kernel Driver for Huawei Intelligent NIC(HiNIC) family
============================================================
Overview:
=========
HiNIC is a network interface card for the Data Center Area.
The driver supports a range of link-speed devices (10GbE, 25GbE, 40GbE, etc.).
The driver supports also a negotiated and extendable feature set.
Some HiNIC devices support SR-IOV. This driver is used for Physical Function
(PF).
HiNIC devices support MSI-X interrupt vector for each Tx/Rx queue and
adaptive interrupt moderation.
HiNIC devices support also various offload features such as checksum offload,
TCP Transmit Segmentation Offload(TSO), Receive-Side Scaling(RSS) and
LRO(Large Receive Offload).
Supported PCI vendor ID/device IDs:
===================================
19e5:1822 - HiNIC PF
Driver Architecture and Source Code:
====================================
hinic_dev - Implement a Logical Network device that is independent from
specific HW details about HW data structure formats.
hinic_hwdev - Implement the HW details of the device and include the components
for accessing the PCI NIC.
hinic_hwdev contains the following components:
===============================================
HW Interface:
=============
The interface for accessing the pci device (DMA memory and PCI BARs).
(hinic_hw_if.c, hinic_hw_if.h)
Configuration Status Registers Area that describes the HW Registers on the
configuration and status BAR0. (hinic_hw_csr.h)
MGMT components:
================
Asynchronous Event Queues(AEQs) - The event queues for receiving messages from
the MGMT modules on the cards. (hinic_hw_eqs.c, hinic_hw_eqs.h)
Application Programmable Interface commands(API CMD) - Interface for sending
MGMT commands to the card. (hinic_hw_api_cmd.c, hinic_hw_api_cmd.h)
Management (MGMT) - the PF to MGMT channel that uses API CMD for sending MGMT
commands to the card and receives notifications from the MGMT modules on the
card by AEQs. Also set the addresses of the IO CMDQs in HW.
(hinic_hw_mgmt.c, hinic_hw_mgmt.h)
IO components:
==============
Completion Event Queues(CEQs) - The completion Event Queues that describe IO
tasks that are finished. (hinic_hw_eqs.c, hinic_hw_eqs.h)
Work Queues(WQ) - Contain the memory and operations for use by CMD queues and
the Queue Pairs. The WQ is a Memory Block in a Page. The Block contains
pointers to Memory Areas that are the Memory for the Work Queue Elements(WQEs).
(hinic_hw_wq.c, hinic_hw_wq.h)
Command Queues(CMDQ) - The queues for sending commands for IO management and is
used to set the QPs addresses in HW. The commands completion events are
accumulated on the CEQ that is configured to receive the CMDQ completion events.
(hinic_hw_cmdq.c, hinic_hw_cmdq.h)
Queue Pairs(QPs) - The HW Receive and Send queues for Receiving and Transmitting
Data. (hinic_hw_qp.c, hinic_hw_qp.h, hinic_hw_qp_ctxt.h)
IO - de/constructs all the IO components. (hinic_hw_io.c, hinic_hw_io.h)
HW device:
==========
HW device - de/constructs the HW Interface, the MGMT components on the
initialization of the driver and the IO components on the case of Interface
UP/DOWN Events. (hinic_hw_dev.c, hinic_hw_dev.h)
hinic_dev contains the following components:
===============================================
PCI ID table - Contains the supported PCI Vendor/Device IDs.
(hinic_pci_tbl.h)
Port Commands - Send commands to the HW device for port management
(MAC, Vlan, MTU, ...). (hinic_port.c, hinic_port.h)
Tx Queues - Logical Tx Queues that use the HW Send Queues for transmit.
The Logical Tx queue is not dependent on the format of the HW Send Queue.
(hinic_tx.c, hinic_tx.h)
Rx Queues - Logical Rx Queues that use the HW Receive Queues for receive.
The Logical Rx queue is not dependent on the format of the HW Receive Queue.
(hinic_rx.c, hinic_rx.h)
hinic_dev - de/constructs the Logical Tx and Rx Queues.
(hinic_main.c, hinic_dev.h)
Miscellaneous:
=============
Common functions that are used by HW and Logical Device.
(hinic_common.c, hinic_common.h)
Support
=======
If an issue is identified with the released source code on the supported kernel
with a supported adapter, email the specific information related to the issue to
aviad.krawczyk@huawei.com.
...@@ -78,6 +78,7 @@ source "drivers/net/ethernet/freescale/Kconfig" ...@@ -78,6 +78,7 @@ source "drivers/net/ethernet/freescale/Kconfig"
source "drivers/net/ethernet/fujitsu/Kconfig" source "drivers/net/ethernet/fujitsu/Kconfig"
source "drivers/net/ethernet/hisilicon/Kconfig" source "drivers/net/ethernet/hisilicon/Kconfig"
source "drivers/net/ethernet/hp/Kconfig" source "drivers/net/ethernet/hp/Kconfig"
source "drivers/net/ethernet/huawei/Kconfig"
source "drivers/net/ethernet/ibm/Kconfig" source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig" source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig" source "drivers/net/ethernet/i825xx/Kconfig"
......
...@@ -41,6 +41,7 @@ obj-$(CONFIG_NET_VENDOR_FREESCALE) += freescale/ ...@@ -41,6 +41,7 @@ obj-$(CONFIG_NET_VENDOR_FREESCALE) += freescale/
obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/ obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/
obj-$(CONFIG_NET_VENDOR_HISILICON) += hisilicon/ obj-$(CONFIG_NET_VENDOR_HISILICON) += hisilicon/
obj-$(CONFIG_NET_VENDOR_HP) += hp/ obj-$(CONFIG_NET_VENDOR_HP) += hp/
obj-$(CONFIG_NET_VENDOR_HUAWEI) += huawei/
obj-$(CONFIG_NET_VENDOR_IBM) += ibm/ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/ obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
......
#
# Huawei driver configuration
#
config NET_VENDOR_HUAWEI
bool "Huawei devices"
default y
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Huawei cards. If you say Y, you will be asked
for your specific card in the following questions.
if NET_VENDOR_HUAWEI
source "drivers/net/ethernet/huawei/hinic/Kconfig"
endif # NET_VENDOR_HUAWEI
#
# Makefile for the Huawei device drivers.
#
obj-$(CONFIG_HINIC) += hinic/
#
# Huawei driver configuration
#
config HINIC
tristate "Huawei Intelligent PCIE Network Interface Card"
depends on (PCI_MSI && X86)
default m
---help---
This driver supports HiNIC PCIE Ethernet cards.
To compile this driver as part of the kernel, choose Y here.
If unsure, choose N.
The default is compiled as module.
obj-$(CONFIG_HINIC) += hinic.o
hinic-y := hinic_main.o hinic_hw_dev.o hinic_hw_if.o
/*
* Huawei HiNIC PCI Express Linux driver
* Copyright(c) 2017 Huawei Technologies Co., Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
*/
#ifndef HINIC_DEV_H
#define HINIC_DEV_H
#include <linux/netdevice.h>
#include <linux/types.h>
#include "hinic_hw_dev.h"
#define HINIC_DRV_NAME "hinic"
struct hinic_dev {
struct net_device *netdev;
struct hinic_hwdev *hwdev;
u32 msg_enable;
};
#endif
/*
* Huawei HiNIC PCI Express Linux driver
* Copyright(c) 2017 Huawei Technologies Co., Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
*/
#ifndef HINIC_HW_CSR_H
#define HINIC_HW_CSR_H
/* HW interface registers */
#define HINIC_CSR_FUNC_ATTR0_ADDR 0x0
#define HINIC_CSR_FUNC_ATTR1_ADDR 0x4
#define HINIC_DMA_ATTR_BASE 0xC80
#define HINIC_ELECTION_BASE 0x4200
#define HINIC_DMA_ATTR_STRIDE 0x4
#define HINIC_CSR_DMA_ATTR_ADDR(idx) \
(HINIC_DMA_ATTR_BASE + (idx) * HINIC_DMA_ATTR_STRIDE)
#define HINIC_PPF_ELECTION_STRIDE 0x4
#define HINIC_CSR_MAX_PORTS 4
#define HINIC_CSR_PPF_ELECTION_ADDR(idx) \
(HINIC_ELECTION_BASE + (idx) * HINIC_PPF_ELECTION_STRIDE)
#endif
/*
* Huawei HiNIC PCI Express Linux driver
* Copyright(c) 2017 Huawei Technologies Co., Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include "hinic_hw_if.h"
#include "hinic_hw_dev.h"
#define MAX_IRQS(max_qps, num_aeqs, num_ceqs) \
(2 * (max_qps) + (num_aeqs) + (num_ceqs))
/**
* init_msix - enable the msix and save the entries
* @hwdev: the NIC HW device
*
* Return 0 - Success, negative - Failure
**/
static int init_msix(struct hinic_hwdev *hwdev)
{
struct hinic_hwif *hwif = hwdev->hwif;
struct pci_dev *pdev = hwif->pdev;
int nr_irqs, num_aeqs, num_ceqs;
size_t msix_entries_size;
int i, err;
num_aeqs = HINIC_HWIF_NUM_AEQS(hwif);
num_ceqs = HINIC_HWIF_NUM_CEQS(hwif);
nr_irqs = MAX_IRQS(HINIC_MAX_QPS, num_aeqs, num_ceqs);
if (nr_irqs > HINIC_HWIF_NUM_IRQS(hwif))
nr_irqs = HINIC_HWIF_NUM_IRQS(hwif);
msix_entries_size = nr_irqs * sizeof(*hwdev->msix_entries);
hwdev->msix_entries = devm_kzalloc(&pdev->dev, msix_entries_size,
GFP_KERNEL);
if (!hwdev->msix_entries)
return -ENOMEM;
for (i = 0; i < nr_irqs; i++)
hwdev->msix_entries[i].entry = i;
err = pci_enable_msix_exact(pdev, hwdev->msix_entries, nr_irqs);
if (err) {
dev_err(&pdev->dev, "Failed to enable pci msix\n");
return err;
}
return 0;
}
/**
* disable_msix - disable the msix
* @hwdev: the NIC HW device
**/
static void disable_msix(struct hinic_hwdev *hwdev)
{
struct hinic_hwif *hwif = hwdev->hwif;
struct pci_dev *pdev = hwif->pdev;
pci_disable_msix(pdev);
}
/**
* init_pfhwdev - Initialize the extended components of PF
* @pfhwdev: the HW device for PF
*
* Return 0 - success, negative - failure
**/
static int init_pfhwdev(struct hinic_pfhwdev *pfhwdev)
{
/* Initialize PF HW device extended components */
return 0;
}
/**
* free_pfhwdev - Free the extended components of PF
* @pfhwdev: the HW device for PF
**/
static void free_pfhwdev(struct hinic_pfhwdev *pfhwdev)
{
}
/**
* hinic_init_hwdev - Initialize the NIC HW
* @pdev: the NIC pci device
*
* Return initialized NIC HW device
*
* Initialize the NIC HW device and return a pointer to it
**/
struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev)
{
struct hinic_pfhwdev *pfhwdev;
struct hinic_hwdev *hwdev;
struct hinic_hwif *hwif;
int err;
hwif = devm_kzalloc(&pdev->dev, sizeof(*hwif), GFP_KERNEL);
if (!hwif)
return ERR_PTR(-ENOMEM);
err = hinic_init_hwif(hwif, pdev);
if (err) {
dev_err(&pdev->dev, "Failed to init HW interface\n");
return ERR_PTR(err);
}
if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
dev_err(&pdev->dev, "Unsupported PCI Function type\n");
err = -EFAULT;
goto err_func_type;
}
pfhwdev = devm_kzalloc(&pdev->dev, sizeof(*pfhwdev), GFP_KERNEL);
if (!pfhwdev) {
err = -ENOMEM;
goto err_pfhwdev_alloc;
}
hwdev = &pfhwdev->hwdev;
hwdev->hwif = hwif;
err = init_msix(hwdev);
if (err) {
dev_err(&pdev->dev, "Failed to init msix\n");
goto err_init_msix;
}
err = init_pfhwdev(pfhwdev);
if (err) {
dev_err(&pdev->dev, "Failed to init PF HW device\n");
goto err_init_pfhwdev;
}
return hwdev;
err_init_pfhwdev:
disable_msix(hwdev);
err_init_msix:
err_pfhwdev_alloc:
err_func_type:
hinic_free_hwif(hwif);
return ERR_PTR(err);
}
/**
* hinic_free_hwdev - Free the NIC HW device
* @hwdev: the NIC HW device
**/
void hinic_free_hwdev(struct hinic_hwdev *hwdev)
{
struct hinic_pfhwdev *pfhwdev = container_of(hwdev,
struct hinic_pfhwdev,
hwdev);
free_pfhwdev(pfhwdev);
disable_msix(hwdev);
hinic_free_hwif(hwdev->hwif);
}
/**
* hinic_hwdev_num_qps - return the number QPs available for use
* @hwdev: the NIC HW device
*
* Return number QPs available for use
**/
int hinic_hwdev_num_qps(struct hinic_hwdev *hwdev)
{
int num_aeqs, num_ceqs, nr_irqs, num_qps;
num_aeqs = HINIC_HWIF_NUM_AEQS(hwdev->hwif);
num_ceqs = HINIC_HWIF_NUM_CEQS(hwdev->hwif);
nr_irqs = HINIC_HWIF_NUM_IRQS(hwdev->hwif);
/* Each QP has its own (SQ + RQ) interrupt */
num_qps = (nr_irqs - (num_aeqs + num_ceqs)) / 2;
/* num_qps must be power of 2 */
return BIT(fls(num_qps) - 1);
}
/*
* Huawei HiNIC PCI Express Linux driver
* Copyright(c) 2017 Huawei Technologies Co., Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
*/
#ifndef HINIC_HW_DEV_H
#define HINIC_HW_DEV_H
#include <linux/pci.h>
#include "hinic_hw_if.h"
#define HINIC_MAX_QPS 32
struct hinic_hwdev {
struct hinic_hwif *hwif;
struct msix_entry *msix_entries;
};
struct hinic_pfhwdev {
struct hinic_hwdev hwdev;
/* PF Extended components should be here */
};
struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev);
void hinic_free_hwdev(struct hinic_hwdev *hwdev);
int hinic_hwdev_num_qps(struct hinic_hwdev *hwdev);
#endif
/*
* Huawei HiNIC PCI Express Linux driver
* Copyright(c) 2017 Huawei Technologies Co., Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
*/
#include <linux/pci.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/types.h>
#include <linux/bitops.h>
#include "hinic_hw_csr.h"
#include "hinic_hw_if.h"
#define PCIE_ATTR_ENTRY 0
/**
* hwif_ready - test if the HW is ready for use
* @hwif: the HW interface of a pci function device
*
* Return 0 - Success, negative - Failure
**/
static int hwif_ready(struct hinic_hwif *hwif)
{
struct pci_dev *pdev = hwif->pdev;
u32 addr, attr1;
addr = HINIC_CSR_FUNC_ATTR1_ADDR;
attr1 = hinic_hwif_read_reg(hwif, addr);
if (!HINIC_FA1_GET(attr1, INIT_STATUS)) {
dev_err(&pdev->dev, "hwif status is not ready\n");
return -EFAULT;
}
return 0;
}
/**
* set_hwif_attr - set the attributes in the relevant members in hwif
* @hwif: the HW interface of a pci function device
* @attr0: the first attribute that was read from the hw
* @attr1: the second attribute that was read from the hw
**/
static void set_hwif_attr(struct hinic_hwif *hwif, u32 attr0, u32 attr1)
{
hwif->attr.func_idx = HINIC_FA0_GET(attr0, FUNC_IDX);
hwif->attr.pf_idx = HINIC_FA0_GET(attr0, PF_IDX);
hwif->attr.pci_intf_idx = HINIC_FA0_GET(attr0, PCI_INTF_IDX);
hwif->attr.func_type = HINIC_FA0_GET(attr0, FUNC_TYPE);
hwif->attr.num_aeqs = BIT(HINIC_FA1_GET(attr1, AEQS_PER_FUNC));
hwif->attr.num_ceqs = BIT(HINIC_FA1_GET(attr1, CEQS_PER_FUNC));
hwif->attr.num_irqs = BIT(HINIC_FA1_GET(attr1, IRQS_PER_FUNC));
hwif->attr.num_dma_attr = BIT(HINIC_FA1_GET(attr1, DMA_ATTR_PER_FUNC));
}
/**
* read_hwif_attr - read the attributes and set members in hwif
* @hwif: the HW interface of a pci function device
**/
static void read_hwif_attr(struct hinic_hwif *hwif)
{
u32 addr, attr0, attr1;
addr = HINIC_CSR_FUNC_ATTR0_ADDR;
attr0 = hinic_hwif_read_reg(hwif, addr);
addr = HINIC_CSR_FUNC_ATTR1_ADDR;
attr1 = hinic_hwif_read_reg(hwif, addr);
set_hwif_attr(hwif, attr0, attr1);
}
/**
* set_ppf - try to set hwif as ppf and set the type of hwif in this case
* @hwif: the HW interface of a pci function device
**/
static void set_ppf(struct hinic_hwif *hwif)
{
struct hinic_func_attr *attr = &hwif->attr;
u32 addr, val, ppf_election;
/* Read Modify Write */
addr = HINIC_CSR_PPF_ELECTION_ADDR(HINIC_HWIF_PCI_INTF(hwif));
val = hinic_hwif_read_reg(hwif, addr);
val = HINIC_PPF_ELECTION_CLEAR(val, IDX);
ppf_election = HINIC_PPF_ELECTION_SET(HINIC_HWIF_FUNC_IDX(hwif), IDX);
val |= ppf_election;
hinic_hwif_write_reg(hwif, addr, val);
/* check PPF */
val = hinic_hwif_read_reg(hwif, addr);
attr->ppf_idx = HINIC_PPF_ELECTION_GET(val, IDX);
if (attr->ppf_idx == HINIC_HWIF_FUNC_IDX(hwif))
attr->func_type = HINIC_PPF;
}
/**
* set_dma_attr - set the dma attributes in the HW
* @hwif: the HW interface of a pci function device
* @entry_idx: the entry index in the dma table
* @st: PCIE TLP steering tag
* @at: PCIE TLP AT field
* @ph: PCIE TLP Processing Hint field
* @no_snooping: PCIE TLP No snooping
* @tph_en: PCIE TLP Processing Hint Enable
**/
static void set_dma_attr(struct hinic_hwif *hwif, u32 entry_idx,
u8 st, u8 at, u8 ph,
enum hinic_pcie_nosnoop no_snooping,
enum hinic_pcie_tph tph_en)
{
u32 addr, val, dma_attr_entry;
/* Read Modify Write */
addr = HINIC_CSR_DMA_ATTR_ADDR(entry_idx);
val = hinic_hwif_read_reg(hwif, addr);
val = HINIC_DMA_ATTR_CLEAR(val, ST) &
HINIC_DMA_ATTR_CLEAR(val, AT) &
HINIC_DMA_ATTR_CLEAR(val, PH) &
HINIC_DMA_ATTR_CLEAR(val, NO_SNOOPING) &
HINIC_DMA_ATTR_CLEAR(val, TPH_EN);
dma_attr_entry = HINIC_DMA_ATTR_SET(st, ST) |
HINIC_DMA_ATTR_SET(at, AT) |
HINIC_DMA_ATTR_SET(ph, PH) |
HINIC_DMA_ATTR_SET(no_snooping, NO_SNOOPING) |
HINIC_DMA_ATTR_SET(tph_en, TPH_EN);
val |= dma_attr_entry;
hinic_hwif_write_reg(hwif, addr, val);
}
/**
* dma_attr_table_init - initialize the the default dma attributes
* @hwif: the HW interface of a pci function device
**/
static void dma_attr_init(struct hinic_hwif *hwif)
{
set_dma_attr(hwif, PCIE_ATTR_ENTRY, HINIC_PCIE_ST_DISABLE,
HINIC_PCIE_AT_DISABLE, HINIC_PCIE_PH_DISABLE,
HINIC_PCIE_SNOOP, HINIC_PCIE_TPH_DISABLE);
}
/**
* hinic_init_hwif - initialize the hw interface
* @hwif: the HW interface of a pci function device
* @pdev: the pci device for acessing PCI resources
*
* Return 0 - Success, negative - Failure
**/
int hinic_init_hwif(struct hinic_hwif *hwif, struct pci_dev *pdev)
{
int err;
hwif->pdev = pdev;
hwif->cfg_regs_bar = pci_ioremap_bar(pdev, HINIC_PCI_CFG_REGS_BAR);
if (!hwif->cfg_regs_bar) {
dev_err(&pdev->dev, "Failed to map configuration regs\n");
return -ENOMEM;
}
err = hwif_ready(hwif);
if (err) {
dev_err(&pdev->dev, "HW interface is not ready\n");
goto err_hwif_ready;
}
read_hwif_attr(hwif);
if (HINIC_IS_PF(hwif))
set_ppf(hwif);
/* No transactionss before DMA is initialized */
dma_attr_init(hwif);
return 0;
err_hwif_ready:
iounmap(hwif->cfg_regs_bar);
return err;
}
/**
* hinic_free_hwif - free the HW interface
* @hwif: the HW interface of a pci function device
**/
void hinic_free_hwif(struct hinic_hwif *hwif)
{
iounmap(hwif->cfg_regs_bar);
}
/*
* Huawei HiNIC PCI Express Linux driver
* Copyright(c) 2017 Huawei Technologies Co., Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
*/
#ifndef HINIC_HW_IF_H
#define HINIC_HW_IF_H
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/types.h>
#include <asm/byteorder.h>
#define HINIC_DMA_ATTR_ST_SHIFT 0
#define HINIC_DMA_ATTR_AT_SHIFT 8
#define HINIC_DMA_ATTR_PH_SHIFT 10
#define HINIC_DMA_ATTR_NO_SNOOPING_SHIFT 12
#define HINIC_DMA_ATTR_TPH_EN_SHIFT 13
#define HINIC_DMA_ATTR_ST_MASK 0xFF
#define HINIC_DMA_ATTR_AT_MASK 0x3
#define HINIC_DMA_ATTR_PH_MASK 0x3
#define HINIC_DMA_ATTR_NO_SNOOPING_MASK 0x1
#define HINIC_DMA_ATTR_TPH_EN_MASK 0x1
#define HINIC_DMA_ATTR_SET(val, member) \
(((u32)(val) & HINIC_DMA_ATTR_##member##_MASK) << \
HINIC_DMA_ATTR_##member##_SHIFT)
#define HINIC_DMA_ATTR_CLEAR(val, member) \
((val) & (~(HINIC_DMA_ATTR_##member##_MASK \
<< HINIC_DMA_ATTR_##member##_SHIFT)))
#define HINIC_FA0_FUNC_IDX_SHIFT 0
#define HINIC_FA0_PF_IDX_SHIFT 10
#define HINIC_FA0_PCI_INTF_IDX_SHIFT 14
/* reserved members - off 16 */
#define HINIC_FA0_FUNC_TYPE_SHIFT 24
#define HINIC_FA0_FUNC_IDX_MASK 0x3FF
#define HINIC_FA0_PF_IDX_MASK 0xF
#define HINIC_FA0_PCI_INTF_IDX_MASK 0x3
#define HINIC_FA0_FUNC_TYPE_MASK 0x1
#define HINIC_FA0_GET(val, member) \
(((val) >> HINIC_FA0_##member##_SHIFT) & HINIC_FA0_##member##_MASK)
#define HINIC_FA1_AEQS_PER_FUNC_SHIFT 8
/* reserved members - off 10 */
#define HINIC_FA1_CEQS_PER_FUNC_SHIFT 12
/* reserved members - off 15 */
#define HINIC_FA1_IRQS_PER_FUNC_SHIFT 20
#define HINIC_FA1_DMA_ATTR_PER_FUNC_SHIFT 24
/* reserved members - off 27 */
#define HINIC_FA1_INIT_STATUS_SHIFT 30
#define HINIC_FA1_AEQS_PER_FUNC_MASK 0x3
#define HINIC_FA1_CEQS_PER_FUNC_MASK 0x7
#define HINIC_FA1_IRQS_PER_FUNC_MASK 0xF
#define HINIC_FA1_DMA_ATTR_PER_FUNC_MASK 0x7
#define HINIC_FA1_INIT_STATUS_MASK 0x1
#define HINIC_FA1_GET(val, member) \
(((val) >> HINIC_FA1_##member##_SHIFT) & HINIC_FA1_##member##_MASK)
#define HINIC_PPF_ELECTION_IDX_SHIFT 0
#define HINIC_PPF_ELECTION_IDX_MASK 0x1F
#define HINIC_PPF_ELECTION_SET(val, member) \
(((u32)(val) & HINIC_PPF_ELECTION_##member##_MASK) << \
HINIC_PPF_ELECTION_##member##_SHIFT)
#define HINIC_PPF_ELECTION_GET(val, member) \
(((val) >> HINIC_PPF_ELECTION_##member##_SHIFT) & \
HINIC_PPF_ELECTION_##member##_MASK)
#define HINIC_PPF_ELECTION_CLEAR(val, member) \
((val) & (~(HINIC_PPF_ELECTION_##member##_MASK \
<< HINIC_PPF_ELECTION_##member##_SHIFT)))
#define HINIC_HWIF_NUM_AEQS(hwif) ((hwif)->attr.num_aeqs)
#define HINIC_HWIF_NUM_CEQS(hwif) ((hwif)->attr.num_ceqs)
#define HINIC_HWIF_NUM_IRQS(hwif) ((hwif)->attr.num_irqs)
#define HINIC_HWIF_FUNC_IDX(hwif) ((hwif)->attr.func_idx)
#define HINIC_HWIF_PCI_INTF(hwif) ((hwif)->attr.pci_intf_idx)
#define HINIC_FUNC_TYPE(hwif) ((hwif)->attr.func_type)
#define HINIC_IS_PF(hwif) (HINIC_FUNC_TYPE(hwif) == HINIC_PF)
#define HINIC_IS_PPF(hwif) (HINIC_FUNC_TYPE(hwif) == HINIC_PPF)
#define HINIC_PCI_CFG_REGS_BAR 0
#define HINIC_PCIE_ST_DISABLE 0
#define HINIC_PCIE_AT_DISABLE 0
#define HINIC_PCIE_PH_DISABLE 0
enum hinic_pcie_nosnoop {
HINIC_PCIE_SNOOP = 0,
HINIC_PCIE_NO_SNOOP = 1,
};
enum hinic_pcie_tph {
HINIC_PCIE_TPH_DISABLE = 0,
HINIC_PCIE_TPH_ENABLE = 1,
};
enum hinic_func_type {
HINIC_PF = 0,
HINIC_PPF = 2,
};
struct hinic_func_attr {
u16 func_idx;
u8 pf_idx;
u8 pci_intf_idx;
enum hinic_func_type func_type;
u8 ppf_idx;
u16 num_irqs;
u8 num_aeqs;
u8 num_ceqs;
u8 num_dma_attr;
};
struct hinic_hwif {
struct pci_dev *pdev;
void __iomem *cfg_regs_bar;
struct hinic_func_attr attr;
};
static inline u32 hinic_hwif_read_reg(struct hinic_hwif *hwif, u32 reg)
{
return be32_to_cpu(readl(hwif->cfg_regs_bar + reg));
}
static inline void hinic_hwif_write_reg(struct hinic_hwif *hwif, u32 reg,
u32 val)
{
writel(cpu_to_be32(val), hwif->cfg_regs_bar + reg);
}
int hinic_init_hwif(struct hinic_hwif *hwif, struct pci_dev *pdev);
void hinic_free_hwif(struct hinic_hwif *hwif);
#endif
/*
* Huawei HiNIC PCI Express Linux driver
* Copyright(c) 2017 Huawei Technologies Co., Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
#include <linux/err.h>
#include "hinic_hw_dev.h"
#include "hinic_dev.h"
MODULE_AUTHOR("Huawei Technologies CO., Ltd");
MODULE_DESCRIPTION("Huawei Intelligent NIC driver");
MODULE_LICENSE("GPL");
#define PCI_DEVICE_ID_HI1822_PF 0x1822
#define MSG_ENABLE_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \
NETIF_MSG_IFUP | \
NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR)
static const struct net_device_ops hinic_netdev_ops = {
/* Operations are empty, should be filled */
};
/**
* nic_dev_init - Initialize the NIC device
* @pdev: the NIC pci device
*
* Return 0 - Success, negative - Failure
**/
static int nic_dev_init(struct pci_dev *pdev)
{
struct hinic_dev *nic_dev;
struct net_device *netdev;
struct hinic_hwdev *hwdev;
int err, num_qps;
hwdev = hinic_init_hwdev(pdev);
if (IS_ERR(hwdev)) {
dev_err(&pdev->dev, "Failed to initialize HW device\n");
return PTR_ERR(hwdev);
}
num_qps = hinic_hwdev_num_qps(hwdev);
if (num_qps <= 0) {
dev_err(&pdev->dev, "Invalid number of QPS\n");
err = -EINVAL;
goto err_num_qps;
}
netdev = alloc_etherdev_mq(sizeof(*nic_dev), num_qps);
if (!netdev) {
dev_err(&pdev->dev, "Failed to allocate Ethernet device\n");
err = -ENOMEM;
goto err_alloc_etherdev;
}
netdev->netdev_ops = &hinic_netdev_ops;
nic_dev = netdev_priv(netdev);
nic_dev->netdev = netdev;
nic_dev->hwdev = hwdev;
nic_dev->msg_enable = MSG_ENABLE_DEFAULT;
pci_set_drvdata(pdev, netdev);
netif_carrier_off(netdev);
err = register_netdev(netdev);
if (err) {
dev_err(&pdev->dev, "Failed to register netdev\n");
goto err_reg_netdev;
}
return 0;
err_reg_netdev:
pci_set_drvdata(pdev, NULL);
free_netdev(netdev);
err_alloc_etherdev:
err_num_qps:
hinic_free_hwdev(hwdev);
return err;
}
static int hinic_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "Failed to enable PCI device\n");
return err;
}
err = pci_request_regions(pdev, HINIC_DRV_NAME);
if (err) {
dev_err(&pdev->dev, "Failed to request PCI regions\n");
goto err_pci_regions;
}
pci_set_master(pdev);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
if (err) {
dev_warn(&pdev->dev, "Couldn't set 64-bit DMA mask\n");
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "Failed to set DMA mask\n");
goto err_dma_mask;
}
}
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
if (err) {
dev_warn(&pdev->dev,
"Couldn't set 64-bit consistent DMA mask\n");
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev,
"Failed to set consistent DMA mask\n");
goto err_dma_consistent_mask;
}
}
err = nic_dev_init(pdev);
if (err) {
dev_err(&pdev->dev, "Failed to initialize NIC device\n");
goto err_nic_dev_init;
}
dev_info(&pdev->dev, "HiNIC driver - probed\n");
return 0;
err_nic_dev_init:
err_dma_consistent_mask:
err_dma_mask:
pci_release_regions(pdev);
err_pci_regions:
pci_disable_device(pdev);
return err;
}
static void hinic_remove(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct hinic_dev *nic_dev = netdev_priv(netdev);
unregister_netdev(netdev);
pci_set_drvdata(pdev, NULL);
hinic_free_hwdev(nic_dev->hwdev);
free_netdev(netdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
dev_info(&pdev->dev, "HiNIC driver - removed\n");
}
static const struct pci_device_id hinic_pci_table[] = {
{ PCI_VDEVICE(HUAWEI, PCI_DEVICE_ID_HI1822_PF), 0},
{ 0, 0}
};
MODULE_DEVICE_TABLE(pci, hinic_pci_table);
static struct pci_driver hinic_driver = {
.name = HINIC_DRV_NAME,
.id_table = hinic_pci_table,
.probe = hinic_probe,
.remove = hinic_remove,
};
module_pci_driver(hinic_driver);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment