Merge tag 'for-5.4/libata-2019-09-15' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:

 - Kill unused export (Andy)

 - Use dma_set_mask_and_coherent() throughout (Christoph)

 - Drop PCS quirk on Denverton, which has different register layout
   (Dan)

 - Support non-boot time detection for pata_buddha (Max)

* tag 'for-5.4/libata-2019-09-15' of git://git.kernel.dk/linux-block:
  libata/ahci: Drop PCS quirk for Denverton and beyond
  ahci: Do not export local variable ahci_em_messages
  libata: switch remaining drivers to use dma_set_mask_and_coherent
  sata_sil24: use dma_set_mask_and_coherent
  sata_qstor: use dma_set_mask_and_coherent
  sata_nv: use dma_set_mask_and_coherent
  sata_mv: use dma_set_mask_and_coherent
  pdc_adma: use dma_set_mask_and_coherent
  ahci: use dma_set_mask_and_coherent
  acard_ahci: use dma_set_mask_and_coherent
  ata/pata_buddha: Probe via modalias instead of initcall

drivers/ata/acard-ahci.c

@@ -160,37 +160,6 @@ static int acard_ahci_pci_device_resume(struct pci_dev *pdev)
 }
 #endif
 
-static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
-{
-	int rc;
-
-	if (using_dac &&
-	    !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
-		if (rc) {
-			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-			if (rc) {
-				dev_err(&pdev->dev,
-					   "64-bit DMA enable failed\n");
-				return rc;
-			}
-		}
-	} else {
-		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
-			return rc;
-		}
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev,
-				"32-bit consistent DMA enable failed\n");
-			return rc;
-		}
-	}
-	return 0;
-}
-
 static void acard_ahci_pci_print_info(struct ata_host *host)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -471,9 +440,12 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
 	}
 
 	/* initialize adapter */
-	rc = acard_ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
-	if (rc)
+	rc = dma_set_mask_and_coherent(&pdev->dev,
+			DMA_BIT_MASK((hpriv->cap & HOST_CAP_64) ? 64 : 32));
+	if (rc) {
+		dev_err(&pdev->dev, "DMA enable failed\n");
 		return rc;
+	}
 
 	rc = ahci_reset_controller(host);
 	if (rc)

drivers/ata/ahci.c

@@ -65,6 +65,12 @@ enum board_ids {
 	board_ahci_sb700,	/* for SB700 and SB800 */
 	board_ahci_vt8251,
 
+	/*
+	 * board IDs for Intel chipsets that support more than 6 ports
+	 * *and* end up needing the PCS quirk.
+	 */
+	board_ahci_pcs7,
+
 	/* aliases */
 	board_ahci_mcp_linux	= board_ahci_mcp65,
 	board_ahci_mcp67	= board_ahci_mcp65,
@@ -220,6 +226,12 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_vt8251_ops,
 	},
+	[board_ahci_pcs7] = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
 };
 
 static const struct pci_device_id ahci_pci_tbl[] = {
@@ -264,26 +276,26 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci_mobile }, /* PCH M RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b0), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b1), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b2), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b3), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b4), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b5), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b6), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19b7), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19bE), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19bF), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c0), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c1), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c2), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c3), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c4), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c5), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c6), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19c7), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19cE), board_ahci }, /* DNV AHCI */
-	{ PCI_VDEVICE(INTEL, 0x19cF), board_ahci }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b0), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b1), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b2), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b3), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b4), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b5), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b6), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19b7), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19bE), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19bF), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c0), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c1), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c2), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c3), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c4), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c5), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c6), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19c7), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19cE), board_ahci_pcs7 }, /* DNV AHCI */
+	{ PCI_VDEVICE(INTEL, 0x19cF), board_ahci_pcs7 }, /* DNV AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1c03), board_ahci_mobile }, /* CPT M AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */
@@ -623,30 +635,6 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev,
 	ahci_save_initial_config(&pdev->dev, hpriv);
 }
 
-static int ahci_pci_reset_controller(struct ata_host *host)
-{
-	struct pci_dev *pdev = to_pci_dev(host->dev);
-	int rc;
-
-	rc = ahci_reset_controller(host);
-	if (rc)
-		return rc;
-
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
-		struct ahci_host_priv *hpriv = host->private_data;
-		u16 tmp16;
-
-		/* configure PCS */
-		pci_read_config_word(pdev, 0x92, &tmp16);
-		if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
-			tmp16 |= hpriv->port_map;
-			pci_write_config_word(pdev, 0x92, tmp16);
-		}
-	}
-
-	return 0;
-}
-
 static void ahci_pci_init_controller(struct ata_host *host)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
@@ -849,7 +837,7 @@ static int ahci_pci_device_runtime_resume(struct device *dev)
 	struct ata_host *host = pci_get_drvdata(pdev);
 	int rc;
 
-	rc = ahci_pci_reset_controller(host);
+	rc = ahci_reset_controller(host);
 	if (rc)
 		return rc;
 	ahci_pci_init_controller(host);
@@ -884,7 +872,7 @@ static int ahci_pci_device_resume(struct device *dev)
 		ahci_mcp89_apple_enable(pdev);
 
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_pci_reset_controller(host);
+		rc = ahci_reset_controller(host);
 		if (rc)
 			return rc;
 
@@ -901,40 +889,23 @@ static int ahci_pci_device_resume(struct device *dev)
 
 static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 {
+	const int dma_bits = using_dac ? 64 : 32;
 	int rc;
 
 	/*
 	 * If the device fixup already set the dma_mask to some non-standard
 	 * value, don't extend it here. This happens on STA2X11, for example.
+	 *
+	 * XXX: manipulating the DMA mask from platform code is completely
+	 * bogus, platform code should use dev->bus_dma_mask instead..
 	 */
 	if (pdev->dma_mask && pdev->dma_mask < DMA_BIT_MASK(32))
 		return 0;
 
-	if (using_dac &&
-	    !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
-		if (rc) {
-			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-			if (rc) {
-				dev_err(&pdev->dev,
-					"64-bit DMA enable failed\n");
-				return rc;
-			}
-		}
-	} else {
-		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
-			return rc;
-		}
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev,
-				"32-bit consistent DMA enable failed\n");
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(dma_bits));
+	if (rc)
+		dev_err(&pdev->dev, "DMA enable failed\n");
 	return rc;
-		}
-	}
-	return 0;
 }
 
 static void ahci_pci_print_info(struct ata_host *host)
@@ -1619,6 +1590,34 @@ static void ahci_update_initial_lpm_policy(struct ata_port *ap,
 		ap->target_lpm_policy = policy;
 }
 
+static void ahci_intel_pcs_quirk(struct pci_dev *pdev, struct ahci_host_priv *hpriv)
+{
+	const struct pci_device_id *id = pci_match_id(ahci_pci_tbl, pdev);
+	u16 tmp16;
+
+	/*
+	 * Only apply the 6-port PCS quirk for known legacy platforms.
+	 */
+	if (!id || id->vendor != PCI_VENDOR_ID_INTEL)
+		return;
+	if (((enum board_ids) id->driver_data) < board_ahci_pcs7)
+		return;
+
+	/*
+	 * port_map is determined from PORTS_IMPL PCI register which is
+	 * implemented as write or write-once register.  If the register
+	 * isn't programmed, ahci automatically generates it from number
+	 * of ports, which is good enough for PCS programming. It is
+	 * otherwise expected that platform firmware enables the ports
+	 * before the OS boots.
+	 */
+	pci_read_config_word(pdev, PCS_6, &tmp16);
+	if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
+		tmp16 |= hpriv->port_map;
+		pci_write_config_word(pdev, PCS_6, tmp16);
+	}
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	unsigned int board_id = ent->driver_data;
@@ -1731,6 +1730,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* save initial config */
 	ahci_pci_save_initial_config(pdev, hpriv);
 
+	/*
+	 * If platform firmware failed to enable ports, try to enable
+	 * them here.
+	 */
+	ahci_intel_pcs_quirk(pdev, hpriv);
+
 	/* prepare host */
 	if (hpriv->cap & HOST_CAP_NCQ) {
 		pi.flags |= ATA_FLAG_NCQ;
@@ -1840,7 +1845,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = ahci_pci_reset_controller(host);
+	rc = ahci_reset_controller(host);
 	if (rc)
 		return rc;
 

drivers/ata/ahci.h

@@ -247,6 +247,8 @@ enum {
 					  ATA_FLAG_ACPI_SATA | ATA_FLAG_AN,
 
 	ICH_MAP				= 0x90, /* ICH MAP register */
+	PCS_6				= 0x92, /* 6 port PCS */
+	PCS_7				= 0x94, /* 7+ port PCS (Denverton) */
 
 	/* em constants */
 	EM_MAX_SLOTS			= 8,

drivers/ata/libahci.c

@@ -175,7 +175,6 @@ struct ata_port_operations ahci_pmp_retry_srst_ops = {
 EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops);
 
 static bool ahci_em_messages __read_mostly = true;
-EXPORT_SYMBOL_GPL(ahci_em_messages);
 module_param(ahci_em_messages, bool, 0444);
 /* add other LED protocol types when they become supported */
 MODULE_PARM_DESC(ahci_em_messages,

drivers/ata/libata-sff.c

@@ -3153,15 +3153,9 @@ void ata_pci_bmdma_init(struct ata_host *host)
 	 * ->sff_irq_clear method.  Try to initialize bmdma_addr
 	 * regardless of dma masks.
 	 */
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
+	rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		ata_bmdma_nodma(host, "failed to set dma mask");
-	if (!rc) {
-		rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
-		if (rc)
-			ata_bmdma_nodma(host,
-					"failed to set consistent dma mask");
-	}
 
 	/* request and iomap DMA region */
 	rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));

drivers/ata/pata_atp867x.c

@@ -463,12 +463,7 @@ static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
 
 	atp867x_fixup(host);
 
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-
-	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
-	return rc;
+	return dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 }
 
 static int atp867x_init_one(struct pci_dev *pdev,

drivers/ata/pata_buddha.c

@@ -18,7 +18,9 @@
 #include <linux/kernel.h>
 #include <linux/libata.h>
 #include <linux/mm.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/types.h>
 #include <linux/zorro.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
@@ -29,7 +31,7 @@
 #include <asm/setup.h>
 
 #define DRV_NAME "pata_buddha"
-#define DRV_VERSION "0.1.0"
+#define DRV_VERSION "0.1.1"
 
 #define BUDDHA_BASE1	0x800
 #define BUDDHA_BASE2	0xa00
@@ -47,11 +49,11 @@ enum {
 	BOARD_XSURF
 };
 
-static unsigned int buddha_bases[3] __initdata = {
+static unsigned int buddha_bases[3] = {
 	BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
 };
 
-static unsigned int xsurf_bases[2] __initdata = {
+static unsigned int xsurf_bases[2] = {
 	XSURF_BASE1, XSURF_BASE2
 };
 
@@ -145,29 +147,20 @@ static struct ata_port_operations pata_xsurf_ops = {
 	.set_mode	= pata_buddha_set_mode,
 };
 
-static int __init pata_buddha_init_one(void)
+static int pata_buddha_probe(struct zorro_dev *z,
+			     const struct zorro_device_id *ent)
 {
-	struct zorro_dev *z = NULL;
-
-	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
-		static const char *board_name[]
-			= { "Buddha", "Catweasel", "X-Surf" };
+	static const char * const board_name[] = {
+		"Buddha", "Catweasel", "X-Surf"
+	};
 	struct ata_host *host;
 	void __iomem *buddha_board;
 	unsigned long board;
-		unsigned int type, nr_ports = 2;
+	unsigned int type = ent->driver_data;
+	unsigned int nr_ports = (type == BOARD_CATWEASEL) ? 3 : 2;
+	void *old_drvdata;
 	int i;
 
-		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
-			type = BOARD_BUDDHA;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
-			type = BOARD_CATWEASEL;
-			nr_ports++;
-		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
-			type = BOARD_XSURF;
-		} else
-			continue;
-
 	dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
 
 	board = z->resource.start;
@@ -176,22 +169,28 @@ static int __init pata_buddha_init_one(void)
 		if (!devm_request_mem_region(&z->dev,
 					     board + BUDDHA_BASE1,
 					     0x800, DRV_NAME))
-				continue;
+			return -ENXIO;
 	} else {
 		if (!devm_request_mem_region(&z->dev,
 					     board + XSURF_BASE1,
 					     0x1000, DRV_NAME))
-				continue;
+			return -ENXIO;
 		if (!devm_request_mem_region(&z->dev,
 					     board + XSURF_BASE2,
-						     0x1000, DRV_NAME))
-				continue;
+					     0x1000, DRV_NAME)) {
 		}
+	}
+
+	/* Workaround for X-Surf: Save drvdata in case zorro8390 has set it */
+	if (type == BOARD_XSURF)
+		old_drvdata = dev_get_drvdata(&z->dev);
 
 	/* allocate host */
 	host = ata_host_alloc(&z->dev, nr_ports);
+	if (type == BOARD_XSURF)
+		dev_set_drvdata(&z->dev, old_drvdata);
 	if (!host)
-			continue;
+		return -ENXIO;
 
 	buddha_board = ZTWO_VADDR(board);
 
@@ -244,12 +243,55 @@ static int __init pata_buddha_init_one(void)
 	ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
 			  IRQF_SHARED, &pata_buddha_sht);
 
+	return 0;
+}
+
+static void pata_buddha_remove(struct zorro_dev *z)
+{
+	struct ata_host *host = dev_get_drvdata(&z->dev);
+
+	ata_host_detach(host);
+}
+
+static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
+	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, BOARD_BUDDHA},
+	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, BOARD_CATWEASEL},
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(zorro, pata_buddha_zorro_tbl);
+
+static struct zorro_driver pata_buddha_driver = {
+	.name           = "pata_buddha",
+	.id_table       = pata_buddha_zorro_tbl,
+	.probe          = pata_buddha_probe,
+	.remove         = pata_buddha_remove,
+};
+
+/*
+ * We cannot have a modalias for X-Surf boards, as it competes with the
+ * zorro8390 network driver. As a stopgap measure until we have proper
+ * MFD support for this board, we manually attach to it late after Zorro
+ * has enumerated its boards.
+ */
+static int __init pata_buddha_late_init(void)
+{
+	struct zorro_dev *z = NULL;
+
+	/* Auto-bind to regular boards */
+	zorro_register_driver(&pata_buddha_driver);
+
+	/* Manually bind to all X-Surf boards */
+	while ((z = zorro_find_device(ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, z))) {
+		static struct zorro_device_id xsurf_ent = {
+			ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, BOARD_XSURF
+		};
+
+		pata_buddha_probe(z, &xsurf_ent);
 	}
 
 	return 0;
 }
-
-module_init(pata_buddha_init_one);
+late_initcall(pata_buddha_late_init);
 
 MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");

drivers/ata/pata_cs5520.c

@@ -155,14 +155,10 @@ static int cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
-	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) {
 		printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
 		return -ENODEV;
 	}
-	if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
-		printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
-		return -ENODEV;
-	}
 
 	/* Map IO ports and initialize host accordingly */
 	iomap[0] = devm_ioport_map(&pdev->dev, cmd_port[0], 8);

drivers/ata/pata_hpt3x3.c

@@ -221,10 +221,7 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (rc)
 		return rc;
 	host->iomap = pcim_iomap_table(pdev);
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+	rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 

drivers/ata/pata_ninja32.c

@@ -123,10 +123,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return rc;
 
 	host->iomap = pcim_iomap_table(dev);
-	rc = dma_set_mask(&dev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = dma_set_coherent_mask(&dev->dev, ATA_DMA_MASK);
+	rc = dma_set_mask_and_coherent(&dev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 	pci_set_master(dev);

drivers/ata/pata_pdc2027x.c

@@ -722,11 +722,7 @@ static int pdc2027x_init_one(struct pci_dev *pdev,
 		return rc;
 	host->iomap = pcim_iomap_table(pdev);
 
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-
-	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+	rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 

drivers/ata/pata_sil680.c

@@ -374,10 +374,7 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	host->iomap = pcim_iomap_table(pdev);
 
 	/* Setup DMA masks */
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+	rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 	pci_set_master(pdev);

drivers/ata/pdc_adma.c

@@ -572,23 +572,6 @@ static void adma_host_init(struct ata_host *host, unsigned int chip_id)
 		adma_reset_engine(host->ports[port_no]);
 }
 
-static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
-{
-	int rc;
-
-	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-	if (rc) {
-		dev_err(&pdev->dev, "32-bit DMA enable failed\n");
-		return rc;
-	}
-	rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-	if (rc) {
-		dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
-		return rc;
-	}
-	return 0;
-}
-
 static int adma_ata_init_one(struct pci_dev *pdev,
 			     const struct pci_device_id *ent)
 {
@@ -619,9 +602,11 @@ static int adma_ata_init_one(struct pci_dev *pdev,
 	host->iomap = pcim_iomap_table(pdev);
 	mmio_base = host->iomap[ADMA_MMIO_BAR];
 
-	rc = adma_set_dma_masks(pdev, mmio_base);
-	if (rc)
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (rc) {
+		dev_err(&pdev->dev, "32-bit DMA enable failed\n");
 		return rc;
+	}
 
 	for (port_no = 0; port_no < ADMA_PORTS; ++port_no) {
 		struct ata_port *ap = host->ports[port_no];

drivers/ata/sata_inic162x.c

@@ -862,18 +862,12 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* Set dma_mask.  This devices doesn't support 64bit addressing. */
-	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc) {
 		dev_err(&pdev->dev, "32-bit DMA enable failed\n");
 		return rc;
 	}
 
-	rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-	if (rc) {
-		dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
-		return rc;
-	}
-
 	rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
 	if (rc) {
 		dev_err(&pdev->dev, "failed to initialize controller\n");

drivers/ata/sata_mv.c

@@ -4314,38 +4314,6 @@ static struct pci_driver mv_pci_driver = {
 
 };
 
-/* move to PCI layer or libata core? */
-static int pci_go_64(struct pci_dev *pdev)
-{
-	int rc;
-
-	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
-		if (rc) {
-			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-			if (rc) {
-				dev_err(&pdev->dev,
-					"64-bit DMA enable failed\n");
-				return rc;
-			}
-		}
-	} else {
-		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
-			return rc;
-		}
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev,
-				"32-bit consistent DMA enable failed\n");
-			return rc;
-		}
-	}
-
-	return rc;
-}
-
 /**
  *      mv_print_info - Dump key info to kernel log for perusal.
  *      @host: ATA host to print info about
@@ -4430,9 +4398,11 @@ static int mv_pci_init_one(struct pci_dev *pdev,
 	host->iomap = pcim_iomap_table(pdev);
 	hpriv->base = host->iomap[MV_PRIMARY_BAR];
 
-	rc = pci_go_64(pdev);
-	if (rc)
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (rc) {
+		dev_err(&pdev->dev, "DMA enable failed\n");
 		return rc;
+	}
 
 	rc = mv_create_dma_pools(hpriv, &pdev->dev);
 	if (rc)

drivers/ata/sata_nv.c

@@ -1122,14 +1122,10 @@ static int nv_adma_port_start(struct ata_port *ap)
 
 	/*
 	 * Now that the legacy PRD and padding buffer are allocated we can
-	 * try to raise the DMA mask to allocate the CPB/APRD table.
+	 * raise the DMA mask to allocate the CPB/APRD table.
 	 */
-	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
-	if (rc) {
-		rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc)
-			return rc;
-	}
+	dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+
 	pp->adma_dma_mask = *dev->dma_mask;
 
 	mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,

drivers/ata/sata_promise.c

@@ -1230,10 +1230,7 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
 	/* initialize adapter */
 	pdc_host_init(host);
 
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+	rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 

drivers/ata/sata_qstor.c

@@ -537,33 +537,13 @@ static void qs_host_init(struct ata_host *host, unsigned int chip_id)
 static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
 {
 	u32 bus_info = readl(mmio_base + QS_HID_HPHY);
-	int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
-
-	if (have_64bit_bus &&
-	    !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
-		if (rc) {
-			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-			if (rc) {
-				dev_err(&pdev->dev,
-					"64-bit DMA enable failed\n");
-				return rc;
-			}
-		}
-	} else {
-		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
-			return rc;
-		}
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev,
-				"32-bit consistent DMA enable failed\n");
+	int dma_bits = (bus_info & QS_HPHY_64BIT) ? 64 : 32;
+	int rc;
+
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(dma_bits));
+	if (rc)
+		dev_err(&pdev->dev, "%d-bit DMA enable failed\n", dma_bits);
 	return rc;
-		}
-	}
-	return 0;
 }
 
 static int qs_ata_init_one(struct pci_dev *pdev,

drivers/ata/sata_sil.c

@@ -757,10 +757,7 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return rc;
 	host->iomap = pcim_iomap_table(pdev);
 
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+	rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 

drivers/ata/sata_sil24.c

@@ -1301,29 +1301,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->iomap = iomap;
 
 	/* configure and activate the device */
-	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (rc) {
-			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-			if (rc) {
-				dev_err(&pdev->dev,
-					"64-bit DMA enable failed\n");
-				return rc;
-			}
-		}
-	} else {
-		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
+		dev_err(&pdev->dev, "DMA enable failed\n");
 		return rc;
 	}
-		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc) {
-			dev_err(&pdev->dev,
-				"32-bit consistent DMA enable failed\n");
-			return rc;
-		}
-	}
 
 	/* Set max read request size to 4096.  This slightly increases
 	 * write throughput for pci-e variants.

drivers/ata/sata_svw.c

@@ -471,10 +471,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
 		ata_port_pbar_desc(ap, 5, offset, "port");
 	}
 
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+	rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 

drivers/ata/sata_sx4.c

@@ -1470,10 +1470,7 @@ static int pdc_sata_init_one(struct pci_dev *pdev,
 	}
 
 	/* configure and activate */
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
+	rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 

drivers/ata/sata_via.c

@@ -505,14 +505,7 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	for (i = 0; i < host->n_ports; i++)
 		vt6421_init_addrs(host->ports[i]);
 
-	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-
-	return 0;
+	return dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 }
 
 static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)

drivers/ata/sata_vsc.c

@@ -371,10 +371,7 @@ static int vsc_sata_init_one(struct pci_dev *pdev,
 	/*
 	 * Use 32 bit DMA mask, because 64 bit address support is poor.
 	 */
-	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-	if (rc)
-		return rc;
-	rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc)
 		return rc;