Merge branch 'net-Allow-more-drivers-with-COMPILE_TEST'

Florian Fainelli says:

====================
net: Allow more drivers with COMPILE_TEST

This patch series includes more drivers to be build tested with COMPILE_TEST
enabled. This helps cover some of the issues I just ran into with missing
a driver *sigh*.

Chanves in v3:

- drop the TI Keystone NETCP driver from the COMPILE_TEST additions

Changes in v2:

- allow FEC to build outside of CONFIG_ARM/ARM64 by defining a layout of
  registers, this is not meant to run, so this is not a real issue if we
  are not matching the correct register layout
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/Kconfig

@@ -22,7 +22,7 @@ if NET_VENDOR_FREESCALE
 config FEC
 	tristate "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 	depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
-		   ARCH_MXC || SOC_IMX28)
+		   ARCH_MXC || SOC_IMX28 || COMPILE_TEST)
 	default ARCH_MXC || SOC_IMX28 if ARM
 	select PHYLIB
 	imply PTP_1588_CLOCK

drivers/net/ethernet/freescale/fec.h

@@ -21,7 +21,7 @@
 
 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
     defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
-    defined(CONFIG_ARM64)
+    defined(CONFIG_ARM64) || defined(CONFIG_COMPILE_TEST)
 /*
  *	Just figures, Motorola would have to change the offsets for
  *	registers in the same peripheral device on different models

drivers/net/ethernet/freescale/fec_main.c

@@ -2107,7 +2107,7 @@ static int fec_enet_get_regs_len(struct net_device *ndev)
 /* List of registers that can be safety be read to dump them with ethtool */
 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
 	defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
-	defined(CONFIG_ARM64)
+	defined(CONFIG_ARM64) || defined(CONFIG_COMPILE_TEST)
 static u32 fec_enet_register_offset[] = {
 	FEC_IEVENT, FEC_IMASK, FEC_R_DES_ACTIVE_0, FEC_X_DES_ACTIVE_0,
 	FEC_ECNTRL, FEC_MII_DATA, FEC_MII_SPEED, FEC_MIB_CTRLSTAT, FEC_R_CNTRL,

drivers/net/ethernet/ti/Kconfig

@@ -18,7 +18,7 @@ if NET_VENDOR_TI
 
 config TI_DAVINCI_EMAC
 	tristate "TI DaVinci EMAC Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) || COMPILE_TEST
 	select TI_DAVINCI_MDIO
 	select TI_DAVINCI_CPDMA
 	select PHYLIB
@@ -30,7 +30,7 @@ config TI_DAVINCI_EMAC
 
 config TI_DAVINCI_MDIO
 	tristate "TI DaVinci MDIO Support"
-	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
 	select PHYLIB
 	---help---
 	  This driver supports TI's DaVinci MDIO module.
@@ -40,7 +40,7 @@ config TI_DAVINCI_MDIO
 
 config TI_DAVINCI_CPDMA
 	tristate "TI DaVinci CPDMA Support"
-	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
 	---help---
 	  This driver supports TI's DaVinci CPDMA dma engine.
 
@@ -60,7 +60,7 @@ config TI_CPSW_ALE
 
 config TI_CPSW
 	tristate "TI CPSW Switch Support"
-	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
 	select TI_DAVINCI_CPDMA
 	select TI_DAVINCI_MDIO
 	select TI_CPSW_PHY_SEL
@@ -75,7 +75,7 @@ config TI_CPSW
 
 config TI_CPTS
 	bool "TI Common Platform Time Sync (CPTS) Support"
-	depends on TI_CPSW || TI_KEYSTONE_NETCP
+	depends on TI_CPSW || TI_KEYSTONE_NETCP || COMPILE_TEST
 	depends on POSIX_TIMERS
 	---help---
 	  This driver supports the Common Platform Time Sync unit of

drivers/net/phy/Kconfig

@@ -118,7 +118,7 @@ config MDIO_I2C
 
 config MDIO_MOXART
 	tristate "MOXA ART MDIO interface support"
-	depends on ARCH_MOXART
+	depends on ARCH_MOXART || COMPILE_TEST
 	help
 	  This driver supports the MDIO interface found in the network
 	  interface units of the MOXA ART SoC
@@ -142,7 +142,7 @@ config MDIO_OCTEON
 
 config MDIO_SUN4I
 	tristate "Allwinner sun4i MDIO interface support"
-	depends on ARCH_SUNXI
+	depends on ARCH_SUNXI || COMPILE_TEST
 	help
 	  This driver supports the MDIO interface found in the network
 	  interface units of the Allwinner SoC that have an EMAC (A10,