Commit 53bcef60 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://www.jni.nu/cris

* 'for-linus' of git://www.jni.nu/cris: (51 commits)
  CRIS: Fix alignment problem for older ld
  CRIS: Always dump registers for segfaulting process.
  CRIS: Add config for pausing a seg-faulting process
  CRIS: Don't take faults while in_atomic
  CRIS: Fixup lookup for delay slot faults
  CRIS: Discard exit.text and .data at runtime
  CRIS: Add cache aligned and read mostly data sections
  CRIS: Return something from profile write
  CRIS: Add ARTPEC-3 and timestamps for sync-serial
  CRIS: Better ARTPEC-3 support for gpio
  CRIS: Add include guard
  CRIS: Better handling of pinmux settings
  CRIS: New DMA defines for ARTPEC-3
  CRIS: __do_strncpy_from_user: Don't read the byte beyond the nil
  CRIS: Pagetable for ARTPEC-3
  CRIS: Machine dependent memmap.h
  CRIS: Check if pointer is set before using it
  CRIS: Machine dependent dma.h
  CRIS: Define __read_mostly for CRISv32
  CRIS: Discard .note.gnu.build-id section
  ...
parents 4fd6c6bf 85d98657
...@@ -24,7 +24,7 @@ config GENERIC_CMOS_UPDATE ...@@ -24,7 +24,7 @@ config GENERIC_CMOS_UPDATE
def_bool y def_bool y
config ARCH_USES_GETTIMEOFFSET config ARCH_USES_GETTIMEOFFSET
def_bool y def_bool n
config GENERIC_IOMAP config GENERIC_IOMAP
bool bool
...@@ -128,16 +128,19 @@ choice ...@@ -128,16 +128,19 @@ choice
config ETRAX100LX config ETRAX100LX
bool "ETRAX-100LX-v1" bool "ETRAX-100LX-v1"
select ARCH_USES_GETTIMEOFFSET
help help
Support version 1 of the ETRAX 100LX. Support version 1 of the ETRAX 100LX.
config ETRAX100LX_V2 config ETRAX100LX_V2
bool "ETRAX-100LX-v2" bool "ETRAX-100LX-v2"
select ARCH_USES_GETTIMEOFFSET
help help
Support version 2 of the ETRAX 100LX. Support version 2 of the ETRAX 100LX.
config SVINTO_SIM config SVINTO_SIM
bool "ETRAX-100LX-for-xsim-simulator" bool "ETRAX-100LX-for-xsim-simulator"
select ARCH_USES_GETTIMEOFFSET
help help
Support the xsim ETRAX Simulator. Support the xsim ETRAX Simulator.
......
...@@ -32,4 +32,10 @@ config DEBUG_NMI_OOPS ...@@ -32,4 +32,10 @@ config DEBUG_NMI_OOPS
If the system locks up without any debug information you can say Y If the system locks up without any debug information you can say Y
here to make it possible to dump an OOPS with an external NMI. here to make it possible to dump an OOPS with an external NMI.
config NO_SEGFAULT_TERMINATION
bool "Keep segfaulting processes"
help
Place segfaulting user mode processes on a wait queue instead of
delivering a terminating SIGSEGV to allow debugging with gdb.
endmenu endmenu
...@@ -383,7 +383,7 @@ config ETRAX_RS485 ...@@ -383,7 +383,7 @@ config ETRAX_RS485
depends on ETRAX_SERIAL depends on ETRAX_SERIAL
help help
Enables support for RS-485 serial communication. For a primer on Enables support for RS-485 serial communication. For a primer on
RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>. RS-485, see <http://en.wikipedia.org/wiki/Rs485>
config ETRAX_RS485_ON_PA config ETRAX_RS485_ON_PA
bool "RS-485 mode on PA" bool "RS-485 mode on PA"
......
...@@ -28,7 +28,6 @@ ...@@ -28,7 +28,6 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/smp_lock.h>
#include <linux/wait.h> #include <linux/wait.h>
#include <asm/uaccess.h> #include <asm/uaccess.h>
#include "i2c.h" #include "i2c.h"
...@@ -376,7 +375,6 @@ int __init eeprom_init(void) ...@@ -376,7 +375,6 @@ int __init eeprom_init(void)
/* Opens the device. */ /* Opens the device. */
static int eeprom_open(struct inode * inode, struct file * file) static int eeprom_open(struct inode * inode, struct file * file)
{ {
cycle_kernel_lock();
if(iminor(inode) != EEPROM_MINOR_NR) if(iminor(inode) != EEPROM_MINOR_NR)
return -ENXIO; return -ENXIO;
if(imajor(inode) != EEPROM_MAJOR_NR) if(imajor(inode) != EEPROM_MAJOR_NR)
......
...@@ -16,7 +16,6 @@ ...@@ -16,7 +16,6 @@
#include <linux/errno.h> #include <linux/errno.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/fs.h> #include <linux/fs.h>
#include <linux/smp_lock.h>
#include <linux/string.h> #include <linux/string.h>
#include <linux/poll.h> #include <linux/poll.h>
#include <linux/init.h> #include <linux/init.h>
...@@ -46,8 +45,7 @@ static char gpio_name[] = "etrax gpio"; ...@@ -46,8 +45,7 @@ static char gpio_name[] = "etrax gpio";
static wait_queue_head_t *gpio_wq; static wait_queue_head_t *gpio_wq;
#endif #endif
static int gpio_ioctl(struct inode *inode, struct file *file, static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
unsigned int cmd, unsigned long arg);
static ssize_t gpio_write(struct file *file, const char __user *buf, static ssize_t gpio_write(struct file *file, const char __user *buf,
size_t count, loff_t *off); size_t count, loff_t *off);
static int gpio_open(struct inode *inode, struct file *filp); static int gpio_open(struct inode *inode, struct file *filp);
...@@ -324,7 +322,6 @@ gpio_open(struct inode *inode, struct file *filp) ...@@ -324,7 +322,6 @@ gpio_open(struct inode *inode, struct file *filp)
if (!priv) if (!priv)
return -ENOMEM; return -ENOMEM;
lock_kernel();
priv->minor = p; priv->minor = p;
/* initialize the io/alarm struct */ /* initialize the io/alarm struct */
...@@ -359,7 +356,6 @@ gpio_open(struct inode *inode, struct file *filp) ...@@ -359,7 +356,6 @@ gpio_open(struct inode *inode, struct file *filp)
alarmlist = priv; alarmlist = priv;
spin_unlock_irqrestore(&gpio_lock, flags); spin_unlock_irqrestore(&gpio_lock, flags);
unlock_kernel();
return 0; return 0;
} }
...@@ -504,9 +500,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) ...@@ -504,9 +500,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
static int static int
gpio_leds_ioctl(unsigned int cmd, unsigned long arg); gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
static int static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
gpio_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{ {
unsigned long flags; unsigned long flags;
unsigned long val; unsigned long val;
...@@ -516,54 +510,65 @@ gpio_ioctl(struct inode *inode, struct file *file, ...@@ -516,54 +510,65 @@ gpio_ioctl(struct inode *inode, struct file *file,
if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
return -EINVAL; return -EINVAL;
spin_lock_irqsave(&gpio_lock, flags);
switch (_IOC_NR(cmd)) { switch (_IOC_NR(cmd)) {
case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
// read the port // read the port
spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) { if (USE_PORTS(priv)) {
ret = *priv->port; ret = *priv->port;
} else if (priv->minor == GPIO_MINOR_G) { } else if (priv->minor == GPIO_MINOR_G) {
ret = (*R_PORT_G_DATA) & 0x7FFFFFFF; ret = (*R_PORT_G_DATA) & 0x7FFFFFFF;
} }
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_SETBITS: case IO_SETBITS:
// set changeable bits with a 1 in arg // set changeable bits with a 1 in arg
spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) { if (USE_PORTS(priv)) {
*priv->port = *priv->shadow |= *priv->port = *priv->shadow |=
((unsigned char)arg & priv->changeable_bits); ((unsigned char)arg & priv->changeable_bits);
} else if (priv->minor == GPIO_MINOR_G) { } else if (priv->minor == GPIO_MINOR_G) {
*R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits); *R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits);
} }
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_CLRBITS: case IO_CLRBITS:
// clear changeable bits with a 1 in arg // clear changeable bits with a 1 in arg
spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) { if (USE_PORTS(priv)) {
*priv->port = *priv->shadow &= *priv->port = *priv->shadow &=
~((unsigned char)arg & priv->changeable_bits); ~((unsigned char)arg & priv->changeable_bits);
} else if (priv->minor == GPIO_MINOR_G) { } else if (priv->minor == GPIO_MINOR_G) {
*R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits); *R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits);
} }
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_HIGHALARM: case IO_HIGHALARM:
// set alarm when bits with 1 in arg go high // set alarm when bits with 1 in arg go high
spin_lock_irqsave(&gpio_lock, flags);
priv->highalarm |= arg; priv->highalarm |= arg;
gpio_some_alarms = 1; gpio_some_alarms = 1;
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_LOWALARM: case IO_LOWALARM:
// set alarm when bits with 1 in arg go low // set alarm when bits with 1 in arg go low
spin_lock_irqsave(&gpio_lock, flags);
priv->lowalarm |= arg; priv->lowalarm |= arg;
gpio_some_alarms = 1; gpio_some_alarms = 1;
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_CLRALARM: case IO_CLRALARM:
// clear alarm for bits with 1 in arg /* clear alarm for bits with 1 in arg */
spin_lock_irqsave(&gpio_lock, flags);
priv->highalarm &= ~arg; priv->highalarm &= ~arg;
priv->lowalarm &= ~arg; priv->lowalarm &= ~arg;
{ {
/* Must update gpio_some_alarms */ /* Must update gpio_some_alarms */
struct gpio_private *p = alarmlist; struct gpio_private *p = alarmlist;
int some_alarms; int some_alarms;
spin_lock_irq(&gpio_lock);
p = alarmlist; p = alarmlist;
some_alarms = 0; some_alarms = 0;
while (p) { while (p) {
...@@ -574,11 +579,12 @@ gpio_ioctl(struct inode *inode, struct file *file, ...@@ -574,11 +579,12 @@ gpio_ioctl(struct inode *inode, struct file *file,
p = p->next; p = p->next;
} }
gpio_some_alarms = some_alarms; gpio_some_alarms = some_alarms;
spin_unlock_irq(&gpio_lock);
} }
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
/* Read direction 0=input 1=output */ /* Read direction 0=input 1=output */
spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) { if (USE_PORTS(priv)) {
ret = *priv->dir_shadow; ret = *priv->dir_shadow;
} else if (priv->minor == GPIO_MINOR_G) { } else if (priv->minor == GPIO_MINOR_G) {
...@@ -587,30 +593,40 @@ gpio_ioctl(struct inode *inode, struct file *file, ...@@ -587,30 +593,40 @@ gpio_ioctl(struct inode *inode, struct file *file,
*/ */
ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF; ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
} }
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
/* Set direction 0=unchanged 1=input, /* Set direction 0=unchanged 1=input,
* return mask with 1=input * return mask with 1=input
*/ */
spin_lock_irqsave(&gpio_lock, flags);
ret = setget_input(priv, arg) & 0x7FFFFFFF; ret = setget_input(priv, arg) & 0x7FFFFFFF;
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
/* Set direction 0=unchanged 1=output, /* Set direction 0=unchanged 1=output,
* return mask with 1=output * return mask with 1=output
*/ */
spin_lock_irqsave(&gpio_lock, flags);
ret = setget_output(priv, arg) & 0x7FFFFFFF; ret = setget_output(priv, arg) & 0x7FFFFFFF;
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_SHUTDOWN: case IO_SHUTDOWN:
spin_lock_irqsave(&gpio_lock, flags);
SOFT_SHUTDOWN(); SOFT_SHUTDOWN();
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_GET_PWR_BT: case IO_GET_PWR_BT:
spin_lock_irqsave(&gpio_lock, flags);
#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN) #if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT)); ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
#else #else
ret = 0; ret = 0;
#endif #endif
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_CFG_WRITE_MODE: case IO_CFG_WRITE_MODE:
spin_lock_irqsave(&gpio_lock, flags);
priv->clk_mask = arg & 0xFF; priv->clk_mask = arg & 0xFF;
priv->data_mask = (arg >> 8) & 0xFF; priv->data_mask = (arg >> 8) & 0xFF;
priv->write_msb = (arg >> 16) & 0x01; priv->write_msb = (arg >> 16) & 0x01;
...@@ -626,24 +642,29 @@ gpio_ioctl(struct inode *inode, struct file *file, ...@@ -626,24 +642,29 @@ gpio_ioctl(struct inode *inode, struct file *file,
priv->data_mask = 0; priv->data_mask = 0;
ret = -EPERM; ret = -EPERM;
} }
spin_unlock_irqrestore(&gpio_lock, flags);
break; break;
case IO_READ_INBITS: case IO_READ_INBITS:
/* *arg is result of reading the input pins */ /* *arg is result of reading the input pins */
spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) { if (USE_PORTS(priv)) {
val = *priv->port; val = *priv->port;
} else if (priv->minor == GPIO_MINOR_G) { } else if (priv->minor == GPIO_MINOR_G) {
val = *R_PORT_G_DATA; val = *R_PORT_G_DATA;
} }
spin_unlock_irqrestore(&gpio_lock, flags);
if (copy_to_user((void __user *)arg, &val, sizeof(val))) if (copy_to_user((void __user *)arg, &val, sizeof(val)))
ret = -EFAULT; ret = -EFAULT;
break; break;
case IO_READ_OUTBITS: case IO_READ_OUTBITS:
/* *arg is result of reading the output shadow */ /* *arg is result of reading the output shadow */
spin_lock_irqsave(&gpio_lock, flags);
if (USE_PORTS(priv)) { if (USE_PORTS(priv)) {
val = *priv->shadow; val = *priv->shadow;
} else if (priv->minor == GPIO_MINOR_G) { } else if (priv->minor == GPIO_MINOR_G) {
val = port_g_data_shadow; val = port_g_data_shadow;
} }
spin_unlock_irqrestore(&gpio_lock, flags);
if (copy_to_user((void __user *)arg, &val, sizeof(val))) if (copy_to_user((void __user *)arg, &val, sizeof(val)))
ret = -EFAULT; ret = -EFAULT;
break; break;
...@@ -656,7 +677,9 @@ gpio_ioctl(struct inode *inode, struct file *file, ...@@ -656,7 +677,9 @@ gpio_ioctl(struct inode *inode, struct file *file,
ret = -EFAULT; ret = -EFAULT;
break; break;
} }
spin_lock_irqsave(&gpio_lock, flags);
val = setget_input(priv, val); val = setget_input(priv, val);
spin_unlock_irqrestore(&gpio_lock, flags);
if (copy_to_user((void __user *)arg, &val, sizeof(val))) if (copy_to_user((void __user *)arg, &val, sizeof(val)))
ret = -EFAULT; ret = -EFAULT;
break; break;
...@@ -668,18 +691,21 @@ gpio_ioctl(struct inode *inode, struct file *file, ...@@ -668,18 +691,21 @@ gpio_ioctl(struct inode *inode, struct file *file,
ret = -EFAULT; ret = -EFAULT;
break; break;
} }
spin_lock_irqsave(&gpio_lock, flags);
val = setget_output(priv, val); val = setget_output(priv, val);
spin_unlock_irqrestore(&gpio_lock, flags);
if (copy_to_user((void __user *)arg, &val, sizeof(val))) if (copy_to_user((void __user *)arg, &val, sizeof(val)))
ret = -EFAULT; ret = -EFAULT;
break; break;
default: default:
spin_lock_irqsave(&gpio_lock, flags);
if (priv->minor == GPIO_MINOR_LEDS) if (priv->minor == GPIO_MINOR_LEDS)
ret = gpio_leds_ioctl(cmd, arg); ret = gpio_leds_ioctl(cmd, arg);
else else
ret = -EINVAL; ret = -EINVAL;
spin_unlock_irqrestore(&gpio_lock, flags);
} /* switch */ } /* switch */
spin_unlock_irqrestore(&gpio_lock, flags);
return ret; return ret;
} }
...@@ -715,7 +741,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) ...@@ -715,7 +741,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
static const struct file_operations gpio_fops = { static const struct file_operations gpio_fops = {
.owner = THIS_MODULE, .owner = THIS_MODULE,
.poll = gpio_poll, .poll = gpio_poll,
.ioctl = gpio_ioctl, .unlocked_ioctl = gpio_ioctl,
.write = gpio_write, .write = gpio_write,
.open = gpio_open, .open = gpio_open,
.release = gpio_release, .release = gpio_release,
......
...@@ -14,7 +14,6 @@ ...@@ -14,7 +14,6 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/sched.h> #include <linux/sched.h>
#include <linux/smp_lock.h>
#include <linux/errno.h> #include <linux/errno.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/fs.h> #include <linux/fs.h>
...@@ -566,7 +565,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) ...@@ -566,7 +565,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
static int static int
i2c_open(struct inode *inode, struct file *filp) i2c_open(struct inode *inode, struct file *filp)
{ {
cycle_kernel_lock();
return 0; return 0;
} }
...@@ -579,9 +577,7 @@ i2c_release(struct inode *inode, struct file *filp) ...@@ -579,9 +577,7 @@ i2c_release(struct inode *inode, struct file *filp)
/* Main device API. ioctl's to write or read to/from i2c registers. /* Main device API. ioctl's to write or read to/from i2c registers.
*/ */
static int static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
i2c_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{ {
if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) { if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
return -EINVAL; return -EINVAL;
...@@ -590,7 +586,7 @@ i2c_ioctl(struct inode *inode, struct file *file, ...@@ -590,7 +586,7 @@ i2c_ioctl(struct inode *inode, struct file *file,
switch (_IOC_NR(cmd)) { switch (_IOC_NR(cmd)) {
case I2C_WRITEREG: case I2C_WRITEREG:
/* write to an i2c slave */ /* write to an i2c slave */
D(printk("i2cw %d %d %d\n", D(printk(KERN_DEBUG "i2cw %d %d %d\n",
I2C_ARGSLAVE(arg), I2C_ARGSLAVE(arg),
I2C_ARGREG(arg), I2C_ARGREG(arg),
I2C_ARGVALUE(arg))); I2C_ARGVALUE(arg)));
...@@ -602,24 +598,23 @@ i2c_ioctl(struct inode *inode, struct file *file, ...@@ -602,24 +598,23 @@ i2c_ioctl(struct inode *inode, struct file *file,
{ {
unsigned char val; unsigned char val;
/* read from an i2c slave */ /* read from an i2c slave */
D(printk("i2cr %d %d ", D(printk(KERN_DEBUG "i2cr %d %d ",
I2C_ARGSLAVE(arg), I2C_ARGSLAVE(arg),
I2C_ARGREG(arg))); I2C_ARGREG(arg)));
val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg)); val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
D(printk("= %d\n", val)); D(printk(KERN_DEBUG "= %d\n", val));
return val; return val;
} }
default: default:
return -EINVAL; return -EINVAL;
} }
return 0; return 0;
} }
static const struct file_operations i2c_fops = { static const struct file_operations i2c_fops = {
.owner = THIS_MODULE, .owner = THIS_MODULE,
.ioctl = i2c_ioctl, .unlocked_ioctl = i2c_ioctl,
.open = i2c_open, .open = i2c_open,
.release = i2c_release, .release = i2c_release,
}; };
......
/* $Id: i2c.h,v 1.3 2004/05/28 09:26:59 starvik Exp $ */ /* i2c.h */
int i2c_init(void); int i2c_init(void);
/* High level I2C actions */ /* High level I2C actions */
......
...@@ -157,7 +157,7 @@ static int sync_serial_open(struct inode *inode, struct file *file); ...@@ -157,7 +157,7 @@ static int sync_serial_open(struct inode *inode, struct file *file);
static int sync_serial_release(struct inode *inode, struct file *file); static int sync_serial_release(struct inode *inode, struct file *file);
static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
static int sync_serial_ioctl(struct inode *inode, struct file *file, static int sync_serial_ioctl(struct file *file,
unsigned int cmd, unsigned long arg); unsigned int cmd, unsigned long arg);
static ssize_t sync_serial_write(struct file *file, const char *buf, static ssize_t sync_serial_write(struct file *file, const char *buf,
size_t count, loff_t *ppos); size_t count, loff_t *ppos);
...@@ -248,7 +248,7 @@ static const struct file_operations sync_serial_fops = { ...@@ -248,7 +248,7 @@ static const struct file_operations sync_serial_fops = {
.write = sync_serial_write, .write = sync_serial_write,
.read = sync_serial_read, .read = sync_serial_read,
.poll = sync_serial_poll, .poll = sync_serial_poll,
.ioctl = sync_serial_ioctl, .unlocked_ioctl = sync_serial_ioctl,
.open = sync_serial_open, .open = sync_serial_open,
.release = sync_serial_release .release = sync_serial_release
}; };
...@@ -678,7 +678,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait) ...@@ -678,7 +678,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
return mask; return mask;
} }
static int sync_serial_ioctl(struct inode *inode, struct file *file, static int sync_serial_ioctl_unlocked(struct file *file,
unsigned int cmd, unsigned long arg) unsigned int cmd, unsigned long arg)
{ {
int return_val = 0; int return_val = 0;
...@@ -956,6 +956,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, ...@@ -956,6 +956,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
return return_val; return return_val;
} }
static long sync_serial_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
long ret;
lock_kernel();
ret = sync_serial_ioctl_unlocked(file, cmd, arg);
unlock_kernel();
return ret;
}
static ssize_t sync_serial_write(struct file *file, const char *buf, static ssize_t sync_serial_write(struct file *file, const char *buf,
size_t count, loff_t *ppos) size_t count, loff_t *ppos)
......
...@@ -467,11 +467,7 @@ timer1_handler(int irq, void *dev_id) ...@@ -467,11 +467,7 @@ timer1_handler(int irq, void *dev_id)
static void wake_up_func(unsigned long data) static void wake_up_func(unsigned long data)
{ {
#ifdef DECLARE_WAITQUEUE wait_queue_head_t *sleep_wait_p = (wait_queue_head_t *)data;
wait_queue_head_t *sleep_wait_p = (wait_queue_head_t*)data;
#else
struct wait_queue **sleep_wait_p = (struct wait_queue **)data;
#endif
wake_up(sleep_wait_p); wake_up(sleep_wait_p);
} }
......
...@@ -280,7 +280,7 @@ _no_romfs_in_flash: ...@@ -280,7 +280,7 @@ _no_romfs_in_flash:
;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does ;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does
;; not need this mechanism anyway) ;; not need this mechanism anyway)
move.d __vmlinux_end, $r0; the image will be after the vmlinux end address move.d __init_end, $r0; the image will be after the end of init
move.d [$r0], $r1 ; cramfs assumes same endian on host/target move.d [$r0], $r1 ; cramfs assumes same endian on host/target
cmp.d CRAMFS_MAGIC, $r1; magic value in cramfs superblock cmp.d CRAMFS_MAGIC, $r1; magic value in cramfs superblock
bne 2f bne 2f
......
...@@ -61,66 +61,16 @@ unsigned long get_ns_in_jiffie(void) ...@@ -61,66 +61,16 @@ unsigned long get_ns_in_jiffie(void)
unsigned long do_slow_gettimeoffset(void) unsigned long do_slow_gettimeoffset(void)
{ {
unsigned long count, t1; unsigned long count;
unsigned long usec_count = 0;
unsigned short presc_count;
static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */
static unsigned long jiffies_p = 0;
/*
* cache volatile jiffies temporarily; we have IRQs turned off.
*/
unsigned long jiffies_t;
/* The timer interrupt comes from Etrax timer 0. In order to get /* The timer interrupt comes from Etrax timer 0. In order to get
* better precision, we check the current value. It might have * better precision, we check the current value. It might have
* underflowed already though. * underflowed already though.
*/ */
#ifndef CONFIG_SVINTO_SIM
/* Not available in the xsim simulator. */
count = *R_TIMER0_DATA; count = *R_TIMER0_DATA;
presc_count = *R_TIM_PRESC_STATUS;
/* presc_count might be wrapped */
t1 = *R_TIMER0_DATA;
if (count != t1){
/* it wrapped, read prescaler again... */
presc_count = *R_TIM_PRESC_STATUS;
count = t1;
}
#else
count = 0;
presc_count = 0;
#endif
jiffies_t = jiffies;
/*
* avoiding timer inconsistencies (they are rare, but they happen)...
* there are one problem that must be avoided here:
* 1. the timer counter underflows
*/
if( jiffies_t == jiffies_p ) {
if( count > count_p ) {
/* Timer wrapped, use new count and prescale
* increase the time corresponding to one jiffie
*/
usec_count = 1000000/HZ;
}
} else
jiffies_p = jiffies_t;
count_p = count;
if (presc_count >= PRESCALE_VALUE/2 ){
presc_count = PRESCALE_VALUE - presc_count + PRESCALE_VALUE/2;
} else {
presc_count = PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2;
}
/* Convert timer value to usec */ /* Convert timer value to usec */
usec_count += ( (TIMER0_DIV - count) * (1000000/HZ)/TIMER0_DIV ) + return (TIMER0_DIV - count) * ((NSEC_PER_SEC/1000)/HZ)/TIMER0_DIV;
(( (presc_count) * (1000000000/PRESCALE_FREQ))/1000);
return usec_count;
} }
/* Excerpt from the Etrax100 HSDD about the built-in watchdog: /* Excerpt from the Etrax100 HSDD about the built-in watchdog:
......
...@@ -11,7 +11,6 @@ ...@@ -11,7 +11,6 @@
#include <linux/string.h> #include <linux/string.h>
#include <linux/fs.h> #include <linux/fs.h>
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/smp_lock.h>
#include <linux/spinlock.h> #include <linux/spinlock.h>
#include <linux/stddef.h> #include <linux/stddef.h>
...@@ -217,7 +216,7 @@ static int cryptocop_open(struct inode *, struct file *); ...@@ -217,7 +216,7 @@ static int cryptocop_open(struct inode *, struct file *);
static int cryptocop_release(struct inode *, struct file *); static int cryptocop_release(struct inode *, struct file *);
static int cryptocop_ioctl(struct inode *inode, struct file *file, static long cryptocop_ioctl(struct file *file,
unsigned int cmd, unsigned long arg); unsigned int cmd, unsigned long arg);
static void cryptocop_start_job(void); static void cryptocop_start_job(void);
...@@ -282,7 +281,7 @@ const struct file_operations cryptocop_fops = { ...@@ -282,7 +281,7 @@ const struct file_operations cryptocop_fops = {
.owner = THIS_MODULE, .owner = THIS_MODULE,
.open = cryptocop_open, .open = cryptocop_open,
.release = cryptocop_release, .release = cryptocop_release,
.ioctl = cryptocop_ioctl .unlocked_ioctl = cryptocop_ioctl
}; };
...@@ -2307,7 +2306,6 @@ static int cryptocop_open(struct inode *inode, struct file *filp) ...@@ -2307,7 +2306,6 @@ static int cryptocop_open(struct inode *inode, struct file *filp)
{ {
int p = iminor(inode); int p = iminor(inode);
cycle_kernel_lock();
if (p != CRYPTOCOP_MINOR) return -EINVAL; if (p != CRYPTOCOP_MINOR) return -EINVAL;
filp->private_data = NULL; filp->private_data = NULL;
...@@ -3102,7 +3100,8 @@ static int cryptocop_ioctl_create_session(struct inode *inode, struct file *filp ...@@ -3102,7 +3100,8 @@ static int cryptocop_ioctl_create_session(struct inode *inode, struct file *filp
return 0; return 0;
} }
static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) static long cryptocop_ioctl_unlocked(struct inode *inode,
struct file *filp, unsigned int cmd, unsigned long arg)
{ {
int err = 0; int err = 0;
if (_IOC_TYPE(cmd) != ETRAXCRYPTOCOP_IOCTYPE) { if (_IOC_TYPE(cmd) != ETRAXCRYPTOCOP_IOCTYPE) {
...@@ -3134,6 +3133,19 @@ static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int ...@@ -3134,6 +3133,19 @@ static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int
return 0; return 0;
} }
static long
cryptocop_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = file->f_path.dentry->d_inode;
long ret;
lock_kernel();
ret = cryptocop_ioctl_unlocked(inode, filp, cmd, arg);
unlock_kernel();
return ret;
}
#ifdef LDEBUG #ifdef LDEBUG
static void print_dma_descriptors(struct cryptocop_int_operation *iop) static void print_dma_descriptors(struct cryptocop_int_operation *iop)
......
...@@ -32,7 +32,7 @@ ...@@ -32,7 +32,7 @@
#include <linux/fs.h> #include <linux/fs.h>
#include <linux/string.h> #include <linux/string.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/smp_lock.h> #include <linux/mutex.h>
#include <asm/etraxi2c.h> #include <asm/etraxi2c.h>
...@@ -47,6 +47,7 @@ ...@@ -47,6 +47,7 @@
#define D(x) #define D(x)
#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */ #define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */
static DEFINE_MUTEX(i2c_mutex);
static const char i2c_name[] = "i2c"; static const char i2c_name[] = "i2c";
#define CLOCK_LOW_TIME 8 #define CLOCK_LOW_TIME 8
...@@ -636,7 +637,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg) ...@@ -636,7 +637,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
static int static int
i2c_open(struct inode *inode, struct file *filp) i2c_open(struct inode *inode, struct file *filp)
{ {
cycle_kernel_lock();
return 0; return 0;
} }
...@@ -665,11 +665,11 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ...@@ -665,11 +665,11 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
I2C_ARGREG(arg), I2C_ARGREG(arg),
I2C_ARGVALUE(arg))); I2C_ARGVALUE(arg)));
lock_kernel(); mutex_lock(&i2c_mutex);
ret = i2c_writereg(I2C_ARGSLAVE(arg), ret = i2c_writereg(I2C_ARGSLAVE(arg),
I2C_ARGREG(arg), I2C_ARGREG(arg),
I2C_ARGVALUE(arg)); I2C_ARGVALUE(arg));
unlock_kernel(); mutex_unlock(&i2c_mutex);
return ret; return ret;
case I2C_READREG: case I2C_READREG:
...@@ -679,9 +679,9 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ...@@ -679,9 +679,9 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
D(printk("i2cr %d %d ", D(printk("i2cr %d %d ",
I2C_ARGSLAVE(arg), I2C_ARGSLAVE(arg),
I2C_ARGREG(arg))); I2C_ARGREG(arg)));
lock_kernel(); mutex_lock(&i2c_mutex);
val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg)); val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
unlock_kernel(); mutex_unlock(&i2c_mutex);
D(printk("= %d\n", val)); D(printk("= %d\n", val));
return val; return val;
} }
......
...@@ -72,8 +72,7 @@ static char gpio_name[] = "etrax gpio"; ...@@ -72,8 +72,7 @@ static char gpio_name[] = "etrax gpio";
static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
unsigned long arg); unsigned long arg);
#endif #endif
static int gpio_ioctl(struct inode *inode, struct file *file, static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
unsigned int cmd, unsigned long arg);
static ssize_t gpio_write(struct file *file, const char __user *buf, static ssize_t gpio_write(struct file *file, const char __user *buf,
size_t count, loff_t *off); size_t count, loff_t *off);
static int gpio_open(struct inode *inode, struct file *filp); static int gpio_open(struct inode *inode, struct file *filp);
...@@ -521,7 +520,7 @@ static inline unsigned long setget_output(struct gpio_private *priv, ...@@ -521,7 +520,7 @@ static inline unsigned long setget_output(struct gpio_private *priv,
return dir_shadow; return dir_shadow;
} /* setget_output */ } /* setget_output */
static int gpio_ioctl(struct inode *inode, struct file *file, static long gpio_ioctl_unlocked(struct file *file,
unsigned int cmd, unsigned long arg) unsigned int cmd, unsigned long arg)
{ {
unsigned long flags; unsigned long flags;
...@@ -664,6 +663,17 @@ static int gpio_ioctl(struct inode *inode, struct file *file, ...@@ -664,6 +663,17 @@ static int gpio_ioctl(struct inode *inode, struct file *file,
return 0; return 0;
} }
static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
lock_kernel();
ret = gpio_ioctl_unlocked(file, cmd, arg);
unlock_kernel();
return ret;
}
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
unsigned long arg) unsigned long arg)
...@@ -879,7 +889,7 @@ static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, ...@@ -879,7 +889,7 @@ static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
static const struct file_operations gpio_fops = { static const struct file_operations gpio_fops = {
.owner = THIS_MODULE, .owner = THIS_MODULE,
.poll = gpio_poll, .poll = gpio_poll,
.ioctl = gpio_ioctl, .unlocked_ioctl = gpio_ioctl,
.write = gpio_write, .write = gpio_write,
.open = gpio_open, .open = gpio_open,
.release = gpio_release, .release = gpio_release,
......
...@@ -74,8 +74,7 @@ static wait_queue_head_t *gpio_wq; ...@@ -74,8 +74,7 @@ static wait_queue_head_t *gpio_wq;
static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
unsigned long arg); unsigned long arg);
#endif #endif
static int gpio_ioctl(struct inode *inode, struct file *file, static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
unsigned int cmd, unsigned long arg);
static ssize_t gpio_write(struct file *file, const char *buf, size_t count, static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
loff_t *off); loff_t *off);
static int gpio_open(struct inode *inode, struct file *filp); static int gpio_open(struct inode *inode, struct file *filp);
...@@ -185,7 +184,7 @@ static volatile unsigned long *dir_oe[NUM_PORTS] = { ...@@ -185,7 +184,7 @@ static volatile unsigned long *dir_oe[NUM_PORTS] = {
static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait) static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
{ {
unsigned int mask = 0; unsigned int mask = 0;
struct gpio_private *priv = (struct gpio_private *)file->private_data; struct gpio_private *priv = file->private_data;
unsigned long data; unsigned long data;
poll_wait(file, &priv->alarm_wq, wait); poll_wait(file, &priv->alarm_wq, wait);
if (priv->minor == GPIO_MINOR_A) { if (priv->minor == GPIO_MINOR_A) {
...@@ -353,7 +352,7 @@ gpio_pa_interrupt(int irq, void *dev_id) ...@@ -353,7 +352,7 @@ gpio_pa_interrupt(int irq, void *dev_id)
static ssize_t gpio_write(struct file *file, const char *buf, size_t count, static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
loff_t *off) loff_t *off)
{ {
struct gpio_private *priv = (struct gpio_private *)file->private_data; struct gpio_private *priv = file->private_data;
unsigned char data, clk_mask, data_mask, write_msb; unsigned char data, clk_mask, data_mask, write_msb;
unsigned long flags; unsigned long flags;
unsigned long shadow; unsigned long shadow;
...@@ -468,7 +467,7 @@ gpio_release(struct inode *inode, struct file *filp) ...@@ -468,7 +467,7 @@ gpio_release(struct inode *inode, struct file *filp)
spin_lock_irq(&alarm_lock); spin_lock_irq(&alarm_lock);
p = alarmlist; p = alarmlist;
todel = (struct gpio_private *)filp->private_data; todel = filp->private_data;
if (p == todel) { if (p == todel) {
alarmlist = todel->next; alarmlist = todel->next;
...@@ -557,17 +556,15 @@ inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg) ...@@ -557,17 +556,15 @@ inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
return dir_shadow; return dir_shadow;
} /* setget_output */ } /* setget_output */
static int static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
static int static int
gpio_ioctl(struct inode *inode, struct file *file, gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
unsigned int cmd, unsigned long arg)
{ {
unsigned long flags; unsigned long flags;
unsigned long val; unsigned long val;
unsigned long shadow; unsigned long shadow;
struct gpio_private *priv = (struct gpio_private *)file->private_data; struct gpio_private *priv = file->private_data;
if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
return -EINVAL; return -EINVAL;
...@@ -707,6 +704,17 @@ gpio_ioctl(struct inode *inode, struct file *file, ...@@ -707,6 +704,17 @@ gpio_ioctl(struct inode *inode, struct file *file,
return 0; return 0;
} }
static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
lock_kernel();
ret = gpio_ioctl_unlocked(file, cmd, arg);
unlock_kernel();
return ret;
}
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
static int static int
virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
...@@ -714,7 +722,7 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ...@@ -714,7 +722,7 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
unsigned long flags; unsigned long flags;
unsigned short val; unsigned short val;
unsigned short shadow; unsigned short shadow;
struct gpio_private *priv = (struct gpio_private *)file->private_data; struct gpio_private *priv = file->private_data;
switch (_IOC_NR(cmd)) { switch (_IOC_NR(cmd)) {
case IO_SETBITS: case IO_SETBITS:
...@@ -858,7 +866,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) ...@@ -858,7 +866,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
static const struct file_operations gpio_fops = { static const struct file_operations gpio_fops = {
.owner = THIS_MODULE, .owner = THIS_MODULE,
.poll = gpio_poll, .poll = gpio_poll,
.ioctl = gpio_ioctl, .unlocked_ioctl = gpio_ioctl,
.write = gpio_write, .write = gpio_write,
.open = gpio_open, .open = gpio_open,
.release = gpio_release, .release = gpio_release,
......
...@@ -153,7 +153,7 @@ static int sync_serial_open(struct inode *, struct file*); ...@@ -153,7 +153,7 @@ static int sync_serial_open(struct inode *, struct file*);
static int sync_serial_release(struct inode*, struct file*); static int sync_serial_release(struct inode*, struct file*);
static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
static int sync_serial_ioctl(struct inode*, struct file*, static int sync_serial_ioctl(struct file *,
unsigned int cmd, unsigned long arg); unsigned int cmd, unsigned long arg);
static ssize_t sync_serial_write(struct file * file, const char * buf, static ssize_t sync_serial_write(struct file * file, const char * buf,
size_t count, loff_t *ppos); size_t count, loff_t *ppos);
...@@ -245,7 +245,7 @@ static const struct file_operations sync_serial_fops = { ...@@ -245,7 +245,7 @@ static const struct file_operations sync_serial_fops = {
.write = sync_serial_write, .write = sync_serial_write,
.read = sync_serial_read, .read = sync_serial_read,
.poll = sync_serial_poll, .poll = sync_serial_poll,
.ioctl = sync_serial_ioctl, .unlocked_ioctl = sync_serial_ioctl,
.open = sync_serial_open, .open = sync_serial_open,
.release = sync_serial_release .release = sync_serial_release
}; };
...@@ -650,7 +650,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait) ...@@ -650,7 +650,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
return mask; return mask;
} }
static int sync_serial_ioctl(struct inode *inode, struct file *file, static int sync_serial_ioctl(struct file *file,
unsigned int cmd, unsigned long arg) unsigned int cmd, unsigned long arg)
{ {
int return_val = 0; int return_val = 0;
...@@ -961,6 +961,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file, ...@@ -961,6 +961,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
return return_val; return return_val;
} }
static long sync_serial_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
long ret;
lock_kernel();
ret = sync_serial_ioctl_unlocked(file, cmd, arg);
unlock_kernel();
return ret;
}
/* NOTE: sync_serial_write does not support concurrency */ /* NOTE: sync_serial_write does not support concurrency */
static ssize_t sync_serial_write(struct file *file, const char *buf, static ssize_t sync_serial_write(struct file *file, const char *buf,
size_t count, loff_t *ppos) size_t count, loff_t *ppos)
......
.global cris_flush_cache_range .global cris_flush_cache_range
.type cris_flush_cache_range, @function
cris_flush_cache_range: cris_flush_cache_range:
move.d 1024, $r12 move.d 1024, $r12
cmp.d $r11, $r12 cmp.d $r11, $r12
...@@ -80,8 +81,10 @@ cris_flush_1KB: ...@@ -80,8 +81,10 @@ cris_flush_1KB:
addq 32, $r10 addq 32, $r10
ba cris_flush_cache_range ba cris_flush_cache_range
sub.d $r12, $r11 sub.d $r12, $r11
.size cris_flush_cache_range, . - cris_flush_cache_range
.global cris_flush_cache .global cris_flush_cache
.type cris_flush_cache, @function
cris_flush_cache: cris_flush_cache:
moveq 0, $r10 moveq 0, $r10
cris_flush_line: cris_flush_line:
...@@ -92,3 +95,5 @@ cris_flush_line: ...@@ -92,3 +95,5 @@ cris_flush_line:
fidxd [$r10] fidxd [$r10]
ret ret
nop nop
.size cris_flush_cache, . - cris_flush_cache
...@@ -76,12 +76,15 @@ _need_resched: ...@@ -76,12 +76,15 @@ _need_resched:
; Called at exit from fork. schedule_tail must be called to drop ; Called at exit from fork. schedule_tail must be called to drop
; spinlock if CONFIG_PREEMPT. ; spinlock if CONFIG_PREEMPT.
.type ret_from_fork,@function
ret_from_fork: ret_from_fork:
jsr schedule_tail jsr schedule_tail
nop nop
ba ret_from_sys_call ba ret_from_sys_call
nop nop
.size ret_from_fork, . - ret_from_fork
.type ret_from_intr,@function
ret_from_intr: ret_from_intr:
;; Check for resched if preemptive kernel, or if we're going back to ;; Check for resched if preemptive kernel, or if we're going back to
;; user-mode. This test matches the user_regs(regs) macro. Don't simply ;; user-mode. This test matches the user_regs(regs) macro. Don't simply
...@@ -91,9 +94,10 @@ ret_from_intr: ...@@ -91,9 +94,10 @@ ret_from_intr:
move.d [$acr], $r0 move.d [$acr], $r0
btstq 16, $r0 ; User-mode flag. btstq 16, $r0 ; User-mode flag.
bpl _resume_kernel bpl _resume_kernel
.size ret_from_intr, . - ret_from_intr + 2 ; +2 includes the dslot.
; Note that di below is in delay slot. ; Note that di below is in delay slot.
.type _resume_userspace,@function
_resume_userspace: _resume_userspace:
di ; So need_resched and sigpending don't change. di ; So need_resched and sigpending don't change.
...@@ -107,6 +111,7 @@ _resume_userspace: ...@@ -107,6 +111,7 @@ _resume_userspace:
nop nop
ba _Rexit ba _Rexit
nop nop
.size _resume_userspace, . - _resume_userspace
;; The system_call is called by a BREAK instruction, which looks pretty ;; The system_call is called by a BREAK instruction, which looks pretty
;; much like any other exception. ;; much like any other exception.
...@@ -122,30 +127,28 @@ _resume_userspace: ...@@ -122,30 +127,28 @@ _resume_userspace:
;; non-used instructions. Only the non-common cases cause the outlined code ;; non-used instructions. Only the non-common cases cause the outlined code
;; to run.. ;; to run..
.type system_call,@function
system_call: system_call:
;; Stack-frame similar to the irq heads, which is reversed in ;; Stack-frame similar to the irq heads, which is reversed in
;; ret_from_sys_call. ;; ret_from_sys_call.
subq 12, $sp ; Skip EXS, EDA.
move $erp, [$sp]
subq 4, $sp
move $srp, [$sp]
subq 4, $sp
move $ccs, [$sp]
subq 4, $sp
ei ; Allow IRQs while handling system call
move $spc, [$sp]
subq 4, $sp
move $mof, [$sp]
subq 4, $sp
move $srs, [$sp]
subq 4, $sp
move.d $acr, [$sp]
subq 14*4, $sp ; Make room for R0-R13.
movem $r13, [$sp] ; Push R0-R13
subq 4, $sp
move.d $r10, [$sp] ; Push orig_r10.
; Set S-bit when kernel debugging to keep hardware breakpoints active. sub.d 92, $sp ; Skip EXS and EDA.
movem $r13, [$sp]
move.d $sp, $r8
addq 14*4, $r8
move.d $acr, $r0
move $srs, $r1
move $mof, $r2
move $spc, $r3
move $ccs, $r4
move $srp, $r5
move $erp, $r6
subq 4, $sp
movem $r6, [$r8]
ei ; Enable interrupts while processing syscalls.
move.d $r10, [$sp]
; Set S-bit when kernel debugging to keep hardware breakpoints active.
#ifdef CONFIG_ETRAX_KGDB #ifdef CONFIG_ETRAX_KGDB
move $ccs, $r0 move $ccs, $r0
or.d (1<<9), $r0 or.d (1<<9), $r0
...@@ -217,7 +220,9 @@ ret_from_sys_call: ...@@ -217,7 +220,9 @@ ret_from_sys_call:
and.d _TIF_ALLWORK_MASK, $r1 and.d _TIF_ALLWORK_MASK, $r1
bne _syscall_exit_work bne _syscall_exit_work
nop nop
.size system_call, . - system_call
.type _Rexit,@function
_Rexit: _Rexit:
;; This epilogue MUST match the prologues in multiple_interrupt, irq.h ;; This epilogue MUST match the prologues in multiple_interrupt, irq.h
;; and ptregs.h. ;; and ptregs.h.
...@@ -234,10 +239,12 @@ _Rexit: ...@@ -234,10 +239,12 @@ _Rexit:
addq 8, $sp ; Skip EXS, EDA. addq 8, $sp ; Skip EXS, EDA.
jump $erp jump $erp
rfe ; Restore condition code stack in delay-slot. rfe ; Restore condition code stack in delay-slot.
.size _Rexit, . - _Rexit
;; We get here after doing a syscall if extra work might need to be done ;; We get here after doing a syscall if extra work might need to be done
;; perform syscall exit tracing if needed. ;; perform syscall exit tracing if needed.
.type _syscall_exit_work,@function
_syscall_exit_work: _syscall_exit_work:
;; R0 contains current at this point and irq's are disabled. ;; R0 contains current at this point and irq's are disabled.
...@@ -253,14 +260,18 @@ _syscall_exit_work: ...@@ -253,14 +260,18 @@ _syscall_exit_work:
move.d $r1, $r9 move.d $r1, $r9
ba _resume_userspace ba _resume_userspace
nop nop
.size _syscall_exit_work, . - _syscall_exit_work
.type _work_pending,@function
_work_pending: _work_pending:
addoq +TI_flags, $r0, $acr addoq +TI_flags, $r0, $acr
move.d [$acr], $r10 move.d [$acr], $r10
btstq TIF_NEED_RESCHED, $r10 ; Need resched? btstq TIF_NEED_RESCHED, $r10 ; Need resched?
bpl _work_notifysig ; No, must be signal/notify. bpl _work_notifysig ; No, must be signal/notify.
nop nop
.size _work_pending, . - _work_pending
.type _work_resched,@function
_work_resched: _work_resched:
move.d $r9, $r1 ; Preserve R9. move.d $r9, $r1 ; Preserve R9.
jsr schedule jsr schedule
...@@ -276,7 +287,9 @@ _work_resched: ...@@ -276,7 +287,9 @@ _work_resched:
btstq TIF_NEED_RESCHED, $r1 btstq TIF_NEED_RESCHED, $r1
bmi _work_resched ; current->work.need_resched. bmi _work_resched ; current->work.need_resched.
nop nop
.size _work_resched, . - _work_resched
.type _work_notifysig,@function
_work_notifysig: _work_notifysig:
;; Deal with pending signals and notify-resume requests. ;; Deal with pending signals and notify-resume requests.
...@@ -288,6 +301,7 @@ _work_notifysig: ...@@ -288,6 +301,7 @@ _work_notifysig:
ba _Rexit ba _Rexit
nop nop
.size _work_notifysig, . - _work_notifysig
;; We get here as a sidetrack when we've entered a syscall with the ;; We get here as a sidetrack when we've entered a syscall with the
;; trace-bit set. We need to call do_syscall_trace and then continue ;; trace-bit set. We need to call do_syscall_trace and then continue
...@@ -329,41 +343,43 @@ _syscall_trace_entry: ...@@ -329,41 +343,43 @@ _syscall_trace_entry:
;; ;;
;; Returns old current in R10. ;; Returns old current in R10.
.type resume,@function
resume: resume:
subq 4, $sp subq 4, $sp ; Make space for srp.
move $srp, [$sp] ; Keep old/new PC on the stack.
add.d $r12, $r10 ; R10 = current tasks tss. add.d $r12, $r10 ; R10 = current tasks tss.
addoq +THREAD_ccs, $r10, $acr addoq +THREAD_ccs, $r10, $acr
move $srp, [$sp] ; Keep old/new PC on the stack.
move $ccs, [$acr] ; Save IRQ enable state. move $ccs, [$acr] ; Save IRQ enable state.
di di
addoq +THREAD_usp, $r10, $acr addoq +THREAD_usp, $r10, $acr
subq 10*4, $sp ; Make room for R9.
move $usp, [$acr] ; Save user-mode stackpointer. move $usp, [$acr] ; Save user-mode stackpointer.
;; See copy_thread for the reason why register R9 is saved. ;; See copy_thread for the reason why register R9 is saved.
subq 10*4, $sp
movem $r9, [$sp] ; Save non-scratch registers and R9. movem $r9, [$sp] ; Save non-scratch registers and R9.
addoq +THREAD_ksp, $r10, $acr addoq +THREAD_ksp, $r10, $acr
move.d $sp, $r10 ; Return last running task in R10.
move.d $sp, [$acr] ; Save kernel SP for old task. move.d $sp, [$acr] ; Save kernel SP for old task.
move.d $sp, $r10 ; Return last running task in R10.
and.d -8192, $r10 ; Get thread_info from stackpointer. and.d -8192, $r10 ; Get thread_info from stackpointer.
addoq +TI_task, $r10, $acr addoq +TI_task, $r10, $acr
move.d [$acr], $r10 ; Get task.
add.d $r12, $r11 ; Find the new tasks tss. add.d $r12, $r11 ; Find the new tasks tss.
move.d [$acr], $r10 ; Get task.
addoq +THREAD_ksp, $r11, $acr addoq +THREAD_ksp, $r11, $acr
move.d [$acr], $sp ; Switch to new stackframe. move.d [$acr], $sp ; Switch to new stackframe.
addoq +THREAD_usp, $r11, $acr
movem [$sp+], $r9 ; Restore non-scratch registers and R9. movem [$sp+], $r9 ; Restore non-scratch registers and R9.
addoq +THREAD_usp, $r11, $acr
move [$acr], $usp ; Restore user-mode stackpointer. move [$acr], $usp ; Restore user-mode stackpointer.
addoq +THREAD_ccs, $r11, $acr addoq +THREAD_ccs, $r11, $acr
move.d [$sp+], $r11
jump $r11 ; Restore PC.
move [$acr], $ccs ; Restore IRQ enable status. move [$acr], $ccs ; Restore IRQ enable status.
move.d [$sp+], $acr .size resume, . - resume
jump $acr ; Restore PC.
nop
nmi_interrupt: nmi_interrupt:
...@@ -426,6 +442,7 @@ spurious_interrupt: ...@@ -426,6 +442,7 @@ spurious_interrupt:
;; time. Jump to the first set interrupt bit in a priotiry fashion. The ;; time. Jump to the first set interrupt bit in a priotiry fashion. The
;; hardware will call the unserved interrupts after the handler ;; hardware will call the unserved interrupts after the handler
;; finishes. ;; finishes.
.type multiple_interrupt, @function
multiple_interrupt: multiple_interrupt:
;; This prologue MUST match the one in irq.h and the struct in ptregs.h! ;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
subq 12, $sp ; Skip EXS, EDA. subq 12, $sp ; Skip EXS, EDA.
...@@ -458,6 +475,7 @@ multiple_interrupt: ...@@ -458,6 +475,7 @@ multiple_interrupt:
move.d $sp, $r10 move.d $sp, $r10
jump ret_from_intr jump ret_from_intr
nop nop
.size multiple_interrupt, . - multiple_interrupt
do_sigtrap: do_sigtrap:
;; Sigtraps the process that executed the BREAK instruction. Creates a ;; Sigtraps the process that executed the BREAK instruction. Creates a
...@@ -514,11 +532,13 @@ _ugdb_handle_exception: ...@@ -514,11 +532,13 @@ _ugdb_handle_exception:
move.d [$sp+], $r0 ; Restore R0 in delay slot. move.d [$sp+], $r0 ; Restore R0 in delay slot.
.global kernel_execve .global kernel_execve
.type kernel_execve,@function
kernel_execve: kernel_execve:
move.d __NR_execve, $r9 move.d __NR_execve, $r9
break 13 break 13
ret ret
nop nop
.size kernel_execve, . - kernel_execve
.data .data
......
...@@ -69,7 +69,13 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */ ...@@ -69,7 +69,13 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
;; ;;
;; Note; 3 cycles is needed for a bank-select to take effect. Further; ;; Note; 3 cycles is needed for a bank-select to take effect. Further;
;; bank 1 is the instruction MMU, bank 2 is the data MMU. ;; bank 1 is the instruction MMU, bank 2 is the data MMU.
#ifndef CONFIG_ETRAX_VCS_SIM
#ifdef CONFIG_CRIS_MACH_ARTPEC3
move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \
| REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 5) \
| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
#elif !defined(CONFIG_ETRAX_VCS_SIM)
move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \ move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \ | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \
| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0 | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
...@@ -88,7 +94,39 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */ ...@@ -88,7 +94,39 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
;; Enable certain page protections and setup linear mapping ;; Enable certain page protections and setup linear mapping
;; for f,e,c,b,4,0. ;; for f,e,c,b,4,0.
#ifndef CONFIG_ETRAX_VCS_SIM
;; ARTPEC-3:
;; c,d used for linear kernel mapping, up to 512 MB
;; e used for vmalloc
;; f unused, but page mapped to get page faults
;; ETRAX FS:
;; c used for linear kernel mapping, up to 256 MB
;; d used for vmalloc
;; e,f used for memory-mapped NOR flash
#ifdef CONFIG_CRIS_MACH_ARTPEC3
move.d REG_STATE(mmu, rw_mm_cfg, we, on) \
| REG_STATE(mmu, rw_mm_cfg, acc, on) \
| REG_STATE(mmu, rw_mm_cfg, ex, on) \
| REG_STATE(mmu, rw_mm_cfg, inv, on) \
| REG_STATE(mmu, rw_mm_cfg, seg_f, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_e, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_d, linear) \
| REG_STATE(mmu, rw_mm_cfg, seg_c, linear) \
| REG_STATE(mmu, rw_mm_cfg, seg_b, linear) \
| REG_STATE(mmu, rw_mm_cfg, seg_a, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_9, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_8, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_7, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_6, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_5, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_4, linear) \
| REG_STATE(mmu, rw_mm_cfg, seg_3, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_2, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_1, page) \
| REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
#elif !defined(CONFIG_ETRAX_VCS_SIM)
move.d REG_STATE(mmu, rw_mm_cfg, we, on) \ move.d REG_STATE(mmu, rw_mm_cfg, we, on) \
| REG_STATE(mmu, rw_mm_cfg, acc, on) \ | REG_STATE(mmu, rw_mm_cfg, acc, on) \
| REG_STATE(mmu, rw_mm_cfg, ex, on) \ | REG_STATE(mmu, rw_mm_cfg, ex, on) \
...@@ -329,7 +367,7 @@ _no_romfs_in_flash: ...@@ -329,7 +367,7 @@ _no_romfs_in_flash:
;; For jffs2, a jhead is prepended which contains with magic and length. ;; For jffs2, a jhead is prepended which contains with magic and length.
;; The jhead is not part of the jffs2 partition however. ;; The jhead is not part of the jffs2 partition however.
#ifndef CONFIG_ETRAXFS_SIM #ifndef CONFIG_ETRAXFS_SIM
move.d __vmlinux_end, $r0 move.d __bss_start, $r0
#else #else
move.d __end, $r0 move.d __end, $r0
#endif #endif
......
...@@ -97,7 +97,11 @@ extern void breakh_BUG(void); ...@@ -97,7 +97,11 @@ extern void breakh_BUG(void);
/* /*
* Build the IRQ handler stubs using macros from irq.h. * Build the IRQ handler stubs using macros from irq.h.
*/ */
#ifdef CONFIG_CRIS_MACH_ARTPEC3
BUILD_TIMER_IRQ(0x31, 0)
#else
BUILD_IRQ(0x31) BUILD_IRQ(0x31)
#endif
BUILD_IRQ(0x32) BUILD_IRQ(0x32)
BUILD_IRQ(0x33) BUILD_IRQ(0x33)
BUILD_IRQ(0x34) BUILD_IRQ(0x34)
...@@ -123,7 +127,11 @@ BUILD_IRQ(0x47) ...@@ -123,7 +127,11 @@ BUILD_IRQ(0x47)
BUILD_IRQ(0x48) BUILD_IRQ(0x48)
BUILD_IRQ(0x49) BUILD_IRQ(0x49)
BUILD_IRQ(0x4a) BUILD_IRQ(0x4a)
#ifdef CONFIG_ETRAXFS
BUILD_TIMER_IRQ(0x4b, 0)
#else
BUILD_IRQ(0x4b) BUILD_IRQ(0x4b)
#endif
BUILD_IRQ(0x4c) BUILD_IRQ(0x4c)
BUILD_IRQ(0x4d) BUILD_IRQ(0x4d)
BUILD_IRQ(0x4e) BUILD_IRQ(0x4e)
...@@ -199,25 +207,20 @@ block_irq(int irq, int cpu) ...@@ -199,25 +207,20 @@ block_irq(int irq, int cpu)
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&irq_lock, flags); spin_lock_irqsave(&irq_lock, flags);
if (irq - FIRST_IRQ < 32) /* Remember, 1 let thru, 0 block. */
if (irq - FIRST_IRQ < 32) {
intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
rw_mask, 0); rw_mask, 0);
else
intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
rw_mask, 1);
/* Remember; 1 let thru, 0 block. */
if (irq - FIRST_IRQ < 32)
intr_mask &= ~(1 << (irq - FIRST_IRQ)); intr_mask &= ~(1 << (irq - FIRST_IRQ));
else
intr_mask &= ~(1 << (irq - FIRST_IRQ - 32));
if (irq - FIRST_IRQ < 32)
REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
0, intr_mask); 0, intr_mask);
else } else {
intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
rw_mask, 1);
intr_mask &= ~(1 << (irq - FIRST_IRQ - 32));
REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
1, intr_mask); 1, intr_mask);
}
spin_unlock_irqrestore(&irq_lock, flags); spin_unlock_irqrestore(&irq_lock, flags);
} }
...@@ -228,26 +231,20 @@ unblock_irq(int irq, int cpu) ...@@ -228,26 +231,20 @@ unblock_irq(int irq, int cpu)
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&irq_lock, flags); spin_lock_irqsave(&irq_lock, flags);
if (irq - FIRST_IRQ < 32) /* Remember, 1 let thru, 0 block. */
if (irq - FIRST_IRQ < 32) {
intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
rw_mask, 0); rw_mask, 0);
else
intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
rw_mask, 1);
/* Remember; 1 let thru, 0 block. */
if (irq - FIRST_IRQ < 32)
intr_mask |= (1 << (irq - FIRST_IRQ)); intr_mask |= (1 << (irq - FIRST_IRQ));
else
intr_mask |= (1 << (irq - FIRST_IRQ - 32));
if (irq - FIRST_IRQ < 32)
REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
0, intr_mask); 0, intr_mask);
else } else {
intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
rw_mask, 1);
intr_mask |= (1 << (irq - FIRST_IRQ - 32));
REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask, REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
1, intr_mask); 1, intr_mask);
}
spin_unlock_irqrestore(&irq_lock, flags); spin_unlock_irqrestore(&irq_lock, flags);
} }
......
...@@ -174,10 +174,10 @@ ...@@ -174,10 +174,10 @@
#include <asm/ptrace.h> #include <asm/ptrace.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <arch/hwregs/reg_map.h> #include <hwregs/reg_map.h>
#include <arch/hwregs/reg_rdwr.h> #include <hwregs/reg_rdwr.h>
#include <arch/hwregs/intr_vect_defs.h> #include <hwregs/intr_vect_defs.h>
#include <arch/hwregs/ser_defs.h> #include <hwregs/ser_defs.h>
/* From entry.S. */ /* From entry.S. */
extern void gdb_handle_exception(void); extern void gdb_handle_exception(void);
...@@ -988,26 +988,26 @@ stub_is_stopped(int sigval) ...@@ -988,26 +988,26 @@ stub_is_stopped(int sigval)
} }
/* Only send PC, frame and stack pointer. */ /* Only send PC, frame and stack pointer. */
read_register(PC, &reg_cont); read_register(PC, &reg_cont);
ptr = pack_hex_byte(PC); ptr = pack_hex_byte(ptr, PC);
*ptr++ = ':'; *ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]); ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
*ptr++ = ';'; *ptr++ = ';';
read_register(R8, &reg_cont); read_register(R8, &reg_cont);
ptr = pack_hex_byte(R8); ptr = pack_hex_byte(ptr, R8);
*ptr++ = ':'; *ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]); ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
*ptr++ = ';'; *ptr++ = ';';
read_register(SP, &reg_cont); read_register(SP, &reg_cont);
ptr = pack_hex_byte(SP); ptr = pack_hex_byte(ptr, SP);
*ptr++ = ':'; *ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]); ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
*ptr++ = ';'; *ptr++ = ';';
/* Send ERP as well; this will save us an entire register fetch in some cases. */ /* Send ERP as well; this will save us an entire register fetch in some cases. */
read_register(ERP, &reg_cont); read_register(ERP, &reg_cont);
ptr = pack_hex_byte(ERP); ptr = pack_hex_byte(ptr, ERP);
*ptr++ = ':'; *ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]); ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
*ptr++ = ';'; *ptr++ = ';';
......
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
* port exceptions for kernel debugging purposes. * port exceptions for kernel debugging purposes.
*/ */
#include <arch/hwregs/intr_vect.h> #include <hwregs/intr_vect.h>
;; Exported functions. ;; Exported functions.
.globl kgdb_handle_exception .globl kgdb_handle_exception
......
/*
* Allocator for I/O pins. All pins are allocated to GPIO at bootup.
* Unassigned pins and GPIO pins can be allocated to a fixed interface
* or the I/O processor instead.
*
* Copyright (c) 2004 Axis Communications AB.
*/
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <arch/hwregs/reg_map.h>
#include <arch/hwregs/reg_rdwr.h>
#include <arch/pinmux.h>
#include <arch/hwregs/pinmux_defs.h>
#undef DEBUG
#define PORT_PINS 18
#define PORTS 4
static char pins[PORTS][PORT_PINS];
static DEFINE_SPINLOCK(pinmux_lock);
static void crisv32_pinmux_set(int port);
int
crisv32_pinmux_init(void)
{
static int initialized = 0;
if (!initialized) {
reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa);
initialized = 1;
pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 =
pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes;
REG_WR(pinmux, regi_pinmux, rw_pa, pa);
crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio);
crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio);
crisv32_pinmux_alloc(PORT_D, 0, PORT_PINS - 1, pinmux_gpio);
crisv32_pinmux_alloc(PORT_E, 0, PORT_PINS - 1, pinmux_gpio);
}
return 0;
}
int
crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
{
int i;
unsigned long flags;
crisv32_pinmux_init();
if (port > PORTS || port < 0)
return -EINVAL;
spin_lock_irqsave(&pinmux_lock, flags);
for (i = first_pin; i <= last_pin; i++)
{
if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) &&
(pins[port][i] != mode))
{
spin_unlock_irqrestore(&pinmux_lock, flags);
#ifdef DEBUG
panic("Pinmux alloc failed!\n");
#endif
return -EPERM;
}
}
for (i = first_pin; i <= last_pin; i++)
pins[port][i] = mode;
crisv32_pinmux_set(port);
spin_unlock_irqrestore(&pinmux_lock, flags);
return 0;
}
int
crisv32_pinmux_alloc_fixed(enum fixed_function function)
{
int ret = -EINVAL;
char saved[sizeof pins];
unsigned long flags;
spin_lock_irqsave(&pinmux_lock, flags);
/* Save internal data for recovery */
memcpy(saved, pins, sizeof pins);
reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
switch(function)
{
case pinmux_ser1:
ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed);
hwprot.ser1 = regk_pinmux_yes;
break;
case pinmux_ser2:
ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed);
hwprot.ser2 = regk_pinmux_yes;
break;
case pinmux_ser3:
ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed);
hwprot.ser3 = regk_pinmux_yes;
break;
case pinmux_sser0:
ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed);
ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
hwprot.sser0 = regk_pinmux_yes;
break;
case pinmux_sser1:
ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
hwprot.sser1 = regk_pinmux_yes;
break;
case pinmux_ata0:
ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed);
ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed);
hwprot.ata0 = regk_pinmux_yes;
break;
case pinmux_ata1:
ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed);
hwprot.ata1 = regk_pinmux_yes;
break;
case pinmux_ata2:
ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed);
ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed);
hwprot.ata2 = regk_pinmux_yes;
break;
case pinmux_ata3:
ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed);
ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed);
hwprot.ata2 = regk_pinmux_yes;
break;
case pinmux_ata:
ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed);
ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed);
hwprot.ata = regk_pinmux_yes;
break;
case pinmux_eth1:
ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed);
hwprot.eth1 = regk_pinmux_yes;
hwprot.eth1_mgm = regk_pinmux_yes;
break;
case pinmux_timer:
ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
hwprot.timer = regk_pinmux_yes;
spin_unlock_irqrestore(&pinmux_lock, flags);
return ret;
}
if (!ret)
REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
else
memcpy(pins, saved, sizeof pins);
spin_unlock_irqrestore(&pinmux_lock, flags);
return ret;
}
void
crisv32_pinmux_set(int port)
{
int i;
int gpio_val = 0;
int iop_val = 0;
for (i = 0; i < PORT_PINS; i++)
{
if (pins[port][i] == pinmux_gpio)
gpio_val |= (1 << i);
else if (pins[port][i] == pinmux_iop)
iop_val |= (1 << i);
}
REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_gio + 8*port, gpio_val);
REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_iop + 8*port, iop_val);
#ifdef DEBUG
crisv32_pinmux_dump();
#endif
}
int
crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
{
int i;
unsigned long flags;
crisv32_pinmux_init();
if (port > PORTS || port < 0)
return -EINVAL;
spin_lock_irqsave(&pinmux_lock, flags);
for (i = first_pin; i <= last_pin; i++)
pins[port][i] = pinmux_none;
crisv32_pinmux_set(port);
spin_unlock_irqrestore(&pinmux_lock, flags);
return 0;
}
void
crisv32_pinmux_dump(void)
{
int i, j;
crisv32_pinmux_init();
for (i = 0; i < PORTS; i++)
{
printk("Port %c\n", 'B'+i);
for (j = 0; j < PORT_PINS; j++)
printk(" Pin %d = %d\n", j, pins[i][j]);
}
}
__initcall(crisv32_pinmux_init);
...@@ -9,6 +9,9 @@ ...@@ -9,6 +9,9 @@
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/param.h> #include <linux/param.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#ifdef CONFIG_PROC_FS #ifdef CONFIG_PROC_FS
#define HAS_FPU 0x0001 #define HAS_FPU 0x0001
...@@ -43,14 +46,15 @@ static struct cpu_info cpinfo[] = { ...@@ -43,14 +46,15 @@ static struct cpu_info cpinfo[] = {
{"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB {"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
| HAS_MMU}, | HAS_MMU},
#ifdef CONFIG_ETRAXFS
{"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU}, {"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU},
#else
{"ARTPEC-3", 32, 32, HAS_ETHERNET100 | HAS_MMU},
#endif
{"Unknown", 0, 0, 0} {"Unknown", 0, 0, 0}
}; };
int int show_cpuinfo(struct seq_file *m, void *v)
show_cpuinfo(struct seq_file *m, void *v)
{ {
int i; int i;
int cpu = (int)v - 1; int cpu = (int)v - 1;
...@@ -107,9 +111,63 @@ show_cpuinfo(struct seq_file *m, void *v) ...@@ -107,9 +111,63 @@ show_cpuinfo(struct seq_file *m, void *v)
#endif /* CONFIG_PROC_FS */ #endif /* CONFIG_PROC_FS */
void void show_etrax_copyright(void)
show_etrax_copyright(void) {
#ifdef CONFIG_ETRAXFS
printk(KERN_INFO "Linux/CRISv32 port on ETRAX FS "
"(C) 2003, 2004 Axis Communications AB\n");
#else
printk(KERN_INFO "Linux/CRISv32 port on ARTPEC-3 "
"(C) 2003-2009 Axis Communications AB\n");
#endif
}
static struct i2c_board_info __initdata i2c_info[] = {
{I2C_BOARD_INFO("camblock", 0x43)},
{I2C_BOARD_INFO("tmp100", 0x48)},
{I2C_BOARD_INFO("tmp100", 0x4A)},
{I2C_BOARD_INFO("tmp100", 0x4C)},
{I2C_BOARD_INFO("tmp100", 0x4D)},
{I2C_BOARD_INFO("tmp100", 0x4E)},
#ifdef CONFIG_RTC_DRV_PCF8563
{I2C_BOARD_INFO("pcf8563", 0x51)},
#endif
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
{I2C_BOARD_INFO("vgpio", 0x20)},
{I2C_BOARD_INFO("vgpio", 0x21)},
#endif
{I2C_BOARD_INFO("pca9536", 0x41)},
{I2C_BOARD_INFO("fnp300", 0x40)},
{I2C_BOARD_INFO("fnp300", 0x42)},
{I2C_BOARD_INFO("adc101", 0x54)},
};
static struct i2c_board_info __initdata i2c_info2[] = {
{I2C_BOARD_INFO("camblock", 0x43)},
{I2C_BOARD_INFO("tmp100", 0x48)},
{I2C_BOARD_INFO("tmp100", 0x4A)},
{I2C_BOARD_INFO("tmp100", 0x4C)},
{I2C_BOARD_INFO("tmp100", 0x4D)},
{I2C_BOARD_INFO("tmp100", 0x4E)},
#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
{I2C_BOARD_INFO("vgpio", 0x20)},
{I2C_BOARD_INFO("vgpio", 0x21)},
#endif
{I2C_BOARD_INFO("pca9536", 0x41)},
{I2C_BOARD_INFO("fnp300", 0x40)},
{I2C_BOARD_INFO("fnp300", 0x42)},
{I2C_BOARD_INFO("adc101", 0x54)},
};
static struct i2c_board_info __initdata i2c_info3[] = {
{I2C_BOARD_INFO("adc101", 0x54)},
};
static int __init etrax_init(void)
{ {
printk(KERN_INFO i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
"Linux/CRISv32 port on ETRAX FS (C) 2003, 2004 Axis Communications AB\n"); i2c_register_board_info(1, i2c_info2, ARRAY_SIZE(i2c_info2));
i2c_register_board_info(2, i2c_info3, ARRAY_SIZE(i2c_info3));
return 0;
} }
arch_initcall(etrax_init);
...@@ -587,7 +587,7 @@ do_signal(int canrestart, struct pt_regs *regs) ...@@ -587,7 +587,7 @@ do_signal(int canrestart, struct pt_regs *regs)
} }
if (regs->r10 == -ERESTART_RESTARTBLOCK){ if (regs->r10 == -ERESTART_RESTARTBLOCK){
regs->r10 = __NR_restart_syscall; regs->r9 = __NR_restart_syscall;
regs->erp -= 2; regs->erp -= 2;
} }
} }
......
/* /*
* linux/arch/cris/arch-v32/kernel/time.c * linux/arch/cris/arch-v32/kernel/time.c
* *
* Copyright (C) 2003-2007 Axis Communications AB * Copyright (C) 2003-2010 Axis Communications AB
* *
*/ */
#include <linux/timex.h> #include <linux/timex.h>
#include <linux/time.h> #include <linux/time.h>
#include <linux/jiffies.h> #include <linux/clocksource.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/swap.h> #include <linux/swap.h>
#include <linux/sched.h> #include <linux/sched.h>
...@@ -36,6 +36,30 @@ ...@@ -36,6 +36,30 @@
/* Number of 763 counts before watchdog bites */ /* Number of 763 counts before watchdog bites */
#define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1) #define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1)
/* Register the continuos readonly timer available in FS and ARTPEC-3. */
static cycle_t read_cont_rotime(struct clocksource *cs)
{
return (u32)REG_RD(timer, regi_timer0, r_time);
}
static struct clocksource cont_rotime = {
.name = "crisv32_rotime",
.rating = 300,
.read = read_cont_rotime,
.mask = CLOCKSOURCE_MASK(32),
.shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init etrax_init_cont_rotime(void)
{
cont_rotime.mult = clocksource_khz2mult(100000, cont_rotime.shift);
clocksource_register(&cont_rotime);
return 0;
}
arch_initcall(etrax_init_cont_rotime);
unsigned long timer_regs[NR_CPUS] = unsigned long timer_regs[NR_CPUS] =
{ {
regi_timer0, regi_timer0,
...@@ -67,43 +91,6 @@ unsigned long get_ns_in_jiffie(void) ...@@ -67,43 +91,6 @@ unsigned long get_ns_in_jiffie(void)
return ns; return ns;
} }
unsigned long do_slow_gettimeoffset(void)
{
unsigned long count;
unsigned long usec_count = 0;
/* For the first call after boot */
static unsigned long count_p = TIMER0_DIV;
static unsigned long jiffies_p = 0;
/* Cache volatile jiffies temporarily; we have IRQs turned off. */
unsigned long jiffies_t;
/* The timer interrupt comes from Etrax timer 0. In order to get
* better precision, we check the current value. It might have
* underflowed already though. */
count = REG_RD(timer, regi_timer0, r_tmr0_data);
jiffies_t = jiffies;
/* Avoiding timer inconsistencies (they are rare, but they happen)
* There is one problem that must be avoided here:
* 1. the timer counter underflows
*/
if( jiffies_t == jiffies_p ) {
if( count > count_p ) {
/* Timer wrapped, use new count and prescale.
* Increase the time corresponding to one jiffy.
*/
usec_count = 1000000/HZ;
}
} else
jiffies_p = jiffies_t;
count_p = count;
/* Convert timer value to usec */
/* 100 MHz timer, divide by 100 to get usec */
usec_count += (TIMER0_DIV - count) / 100;
return usec_count;
}
/* From timer MDS describing the hardware watchdog: /* From timer MDS describing the hardware watchdog:
* 4.3.1 Watchdog Operation * 4.3.1 Watchdog Operation
...@@ -126,8 +113,7 @@ static short int watchdog_key = 42; /* arbitrary 7 bit number */ ...@@ -126,8 +113,7 @@ static short int watchdog_key = 42; /* arbitrary 7 bit number */
* is used though, so set this really low. */ * is used though, so set this really low. */
#define WATCHDOG_MIN_FREE_PAGES 8 #define WATCHDOG_MIN_FREE_PAGES 8
void void reset_watchdog(void)
reset_watchdog(void)
{ {
#if defined(CONFIG_ETRAX_WATCHDOG) #if defined(CONFIG_ETRAX_WATCHDOG)
reg_timer_rw_wd_ctrl wd_ctrl = { 0 }; reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
...@@ -147,8 +133,7 @@ reset_watchdog(void) ...@@ -147,8 +133,7 @@ reset_watchdog(void)
/* stop the watchdog - we still need the correct key */ /* stop the watchdog - we still need the correct key */
void void stop_watchdog(void)
stop_watchdog(void)
{ {
#if defined(CONFIG_ETRAX_WATCHDOG) #if defined(CONFIG_ETRAX_WATCHDOG)
reg_timer_rw_wd_ctrl wd_ctrl = { 0 }; reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
...@@ -162,8 +147,7 @@ stop_watchdog(void) ...@@ -162,8 +147,7 @@ stop_watchdog(void)
extern void show_registers(struct pt_regs *regs); extern void show_registers(struct pt_regs *regs);
void void handle_watchdog_bite(struct pt_regs *regs)
handle_watchdog_bite(struct pt_regs* regs)
{ {
#if defined(CONFIG_ETRAX_WATCHDOG) #if defined(CONFIG_ETRAX_WATCHDOG)
extern int cause_of_death; extern int cause_of_death;
...@@ -203,8 +187,7 @@ handle_watchdog_bite(struct pt_regs* regs) ...@@ -203,8 +187,7 @@ handle_watchdog_bite(struct pt_regs* regs)
*/ */
extern void cris_do_profile(struct pt_regs *regs); extern void cris_do_profile(struct pt_regs *regs);
static inline irqreturn_t static inline irqreturn_t timer_interrupt(int irq, void *dev_id)
timer_interrupt(int irq, void *dev_id)
{ {
struct pt_regs *regs = get_irq_regs(); struct pt_regs *regs = get_irq_regs();
int cpu = smp_processor_id(); int cpu = smp_processor_id();
...@@ -233,7 +216,9 @@ timer_interrupt(int irq, void *dev_id) ...@@ -233,7 +216,9 @@ timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED; return IRQ_HANDLED;
/* Call the real timer interrupt handler */ /* Call the real timer interrupt handler */
write_seqlock(&xtime_lock);
do_timer(1); do_timer(1);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED; return IRQ_HANDLED;
} }
...@@ -246,8 +231,7 @@ static struct irqaction irq_timer = { ...@@ -246,8 +231,7 @@ static struct irqaction irq_timer = {
.name = "timer" .name = "timer"
}; };
void __init void __init cris_timer_init(void)
cris_timer_init(void)
{ {
int cpu = smp_processor_id(); int cpu = smp_processor_id();
reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 }; reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 };
...@@ -273,8 +257,7 @@ cris_timer_init(void) ...@@ -273,8 +257,7 @@ cris_timer_init(void)
REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask); REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask);
} }
void __init void __init time_init(void)
time_init(void)
{ {
reg_intr_vect_rw_mask intr_mask; reg_intr_vect_rw_mask intr_mask;
......
...@@ -9,8 +9,7 @@ ...@@ -9,8 +9,7 @@
#include <hwregs/intr_vect_defs.h> #include <hwregs/intr_vect_defs.h>
#include <asm/irq.h> #include <asm/irq.h>
void void show_registers(struct pt_regs *regs)
show_registers(struct pt_regs *regs)
{ {
/* /*
* It's possible to use either the USP register or current->thread.usp. * It's possible to use either the USP register or current->thread.usp.
...@@ -101,8 +100,7 @@ show_registers(struct pt_regs *regs) ...@@ -101,8 +100,7 @@ show_registers(struct pt_regs *regs)
} }
} }
void void arch_enable_nmi(void)
arch_enable_nmi(void)
{ {
unsigned long flags; unsigned long flags;
......
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
*/ */
.globl csum_partial .globl csum_partial
.type csum_partial,@function
csum_partial: csum_partial:
;; r10 - src ;; r10 - src
...@@ -83,3 +84,5 @@ _do_byte: ...@@ -83,3 +84,5 @@ _do_byte:
addu.b [$r10],$r12 addu.b [$r10],$r12
ret ret
move.d $r12,$r10 move.d $r12,$r10
.size csum_partial, .-csum_partial
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
*/ */
.globl csum_partial_copy_nocheck .globl csum_partial_copy_nocheck
.type csum_partial_copy_nocheck,@function
csum_partial_copy_nocheck: csum_partial_copy_nocheck:
;; r10 - src ;; r10 - src
...@@ -89,3 +90,5 @@ _do_byte: ...@@ -89,3 +90,5 @@ _do_byte:
move.b $r9,[$r11] move.b $r9,[$r11]
ret ret
move.d $r13,$r10 move.d $r13,$r10
.size csum_partial_copy_nocheck, . - csum_partial_copy_nocheck
...@@ -6,7 +6,9 @@ ...@@ -6,7 +6,9 @@
.global cris_spin_lock .global cris_spin_lock
.type cris_spin_lock,@function
.global cris_spin_trylock .global cris_spin_trylock
.type cris_spin_trylock,@function
.text .text
...@@ -22,6 +24,8 @@ cris_spin_lock: ...@@ -22,6 +24,8 @@ cris_spin_lock:
ret ret
nop nop
.size cris_spin_lock, . - cris_spin_lock
cris_spin_trylock: cris_spin_trylock:
clearf p clearf p
1: move.b [$r10], $r11 1: move.b [$r10], $r11
...@@ -31,3 +35,6 @@ cris_spin_trylock: ...@@ -31,3 +35,6 @@ cris_spin_trylock:
clearf p clearf p
ret ret
movu.b $r11,$r10 movu.b $r11,$r10
.size cris_spin_trylock, . - cris_spin_trylock
...@@ -33,6 +33,10 @@ config ETRAX_DDR2_CONFIG ...@@ -33,6 +33,10 @@ config ETRAX_DDR2_CONFIG
hex "DDR2 config" hex "DDR2 config"
default "0" default "0"
config ETRAX_DDR2_LATENCY
hex "DDR2 latency"
default "0"
config ETRAX_PIO_CE0_CFG config ETRAX_PIO_CE0_CFG
hex "PIO CE0 configuration" hex "PIO CE0 configuration"
default "0" default "0"
......
...@@ -24,11 +24,21 @@ ...@@ -24,11 +24,21 @@
;; Refer to ddr2 MDS for initialization sequence ;; Refer to ddr2 MDS for initialization sequence
; 2. Wait 200us
move.d 10000, $r2
1: bne 1b
subq 1, $r2
; Start clock ; Start clock
move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0 move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0
move.d REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1 move.d REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1
move.d $r1, [$r0] move.d $r1, [$r0]
; 2. Wait 200us
move.d 10000, $r2
1: bne 1b
subq 1, $r2
; Reset phy and start calibration ; Reset phy and start calibration
move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0 move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0
move.d REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \ move.d REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \
...@@ -52,6 +62,10 @@ do_cmd: ...@@ -52,6 +62,10 @@ do_cmd:
lslq 16, $r1 lslq 16, $r1
or.d $r3, $r1 or.d $r3, $r1
move.d $r1, [$r0] move.d $r1, [$r0]
; 2. Wait 200us
move.d 10000, $r4
1: bne 1b
subq 1, $r4
cmp.d sdram_commands_end, $r2 cmp.d sdram_commands_end, $r2
blo command_loop blo command_loop
nop nop
...@@ -63,7 +77,7 @@ do_cmd: ...@@ -63,7 +77,7 @@ do_cmd:
; Set latency ; Set latency
move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0 move.d REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0
move.d 0x13, $r1 move.d CONFIG_ETRAX_DDR2_LATENCY, $r1
move.d $r1, [$r0] move.d $r1, [$r0]
; Set configuration ; Set configuration
......
...@@ -31,6 +31,8 @@ ...@@ -31,6 +31,8 @@
; Register values ; Register values
.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg) .dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg)
.dword CONFIG_ETRAX_DDR2_CONFIG .dword CONFIG_ETRAX_DDR2_CONFIG
.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency)
.dword CONFIG_ETRAX_DDR2_LATENCY
.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing) .dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing)
.dword CONFIG_ETRAX_DDR2_TIMING .dword CONFIG_ETRAX_DDR2_TIMING
.dword CONFIG_ETRAX_DDR2_MRS .dword CONFIG_ETRAX_DDR2_MRS
......
...@@ -27,8 +27,7 @@ extern void tlb_init(void); ...@@ -27,8 +27,7 @@ extern void tlb_init(void);
* at kseg_4 thus the ksegs are set up again. Also clear the TLB and do various * at kseg_4 thus the ksegs are set up again. Also clear the TLB and do various
* other paging stuff. * other paging stuff.
*/ */
void __init void __init cris_mmu_init(void)
cris_mmu_init(void)
{ {
unsigned long mmu_config; unsigned long mmu_config;
unsigned long mmu_kbase_hi; unsigned long mmu_kbase_hi;
...@@ -55,14 +54,23 @@ cris_mmu_init(void) ...@@ -55,14 +54,23 @@ cris_mmu_init(void)
/* Initialise the TLB. Function found in tlb.c. */ /* Initialise the TLB. Function found in tlb.c. */
tlb_init(); tlb_init();
/* Enable exceptions and initialize the kernel segments. */ /*
* Enable exceptions and initialize the kernel segments.
* See head.S for differences between ARTPEC-3 and ETRAX FS.
*/
mmu_config = ( REG_STATE(mmu, rw_mm_cfg, we, on) | mmu_config = ( REG_STATE(mmu, rw_mm_cfg, we, on) |
REG_STATE(mmu, rw_mm_cfg, acc, on) | REG_STATE(mmu, rw_mm_cfg, acc, on) |
REG_STATE(mmu, rw_mm_cfg, ex, on) | REG_STATE(mmu, rw_mm_cfg, ex, on) |
REG_STATE(mmu, rw_mm_cfg, inv, on) | REG_STATE(mmu, rw_mm_cfg, inv, on) |
#ifdef CONFIG_CRIS_MACH_ARTPEC3
REG_STATE(mmu, rw_mm_cfg, seg_f, page) |
REG_STATE(mmu, rw_mm_cfg, seg_e, page) |
REG_STATE(mmu, rw_mm_cfg, seg_d, linear) |
#else
REG_STATE(mmu, rw_mm_cfg, seg_f, linear) | REG_STATE(mmu, rw_mm_cfg, seg_f, linear) |
REG_STATE(mmu, rw_mm_cfg, seg_e, linear) | REG_STATE(mmu, rw_mm_cfg, seg_e, linear) |
REG_STATE(mmu, rw_mm_cfg, seg_d, page) | REG_STATE(mmu, rw_mm_cfg, seg_d, page) |
#endif
REG_STATE(mmu, rw_mm_cfg, seg_c, linear) | REG_STATE(mmu, rw_mm_cfg, seg_c, linear) |
REG_STATE(mmu, rw_mm_cfg, seg_b, linear) | REG_STATE(mmu, rw_mm_cfg, seg_b, linear) |
#ifndef CONFIG_ETRAX_VCS_SIM #ifndef CONFIG_ETRAX_VCS_SIM
...@@ -81,9 +89,15 @@ cris_mmu_init(void) ...@@ -81,9 +89,15 @@ cris_mmu_init(void)
REG_STATE(mmu, rw_mm_cfg, seg_1, page) | REG_STATE(mmu, rw_mm_cfg, seg_1, page) |
REG_STATE(mmu, rw_mm_cfg, seg_0, page)); REG_STATE(mmu, rw_mm_cfg, seg_0, page));
/* See head.S for differences between ARTPEC-3 and ETRAX FS. */
mmu_kbase_hi = ( REG_FIELD(mmu, rw_mm_kbase_hi, base_f, 0x0) | mmu_kbase_hi = ( REG_FIELD(mmu, rw_mm_kbase_hi, base_f, 0x0) |
#ifdef CONFIG_CRIS_MACH_ARTPEC3
REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x0) |
REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x5) |
#else
REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x8) | REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x8) |
REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x0) | REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x0) |
#endif
REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) |
REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) |
#ifndef CONFIG_ETRAX_VCS_SIM #ifndef CONFIG_ETRAX_VCS_SIM
...@@ -129,8 +143,7 @@ cris_mmu_init(void) ...@@ -129,8 +143,7 @@ cris_mmu_init(void)
SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */ SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */
} }
void __init void __init paging_init(void)
paging_init(void)
{ {
int i; int i;
unsigned long zones_size[MAX_NR_ZONES]; unsigned long zones_size[MAX_NR_ZONES];
......
...@@ -38,6 +38,7 @@ ...@@ -38,6 +38,7 @@
; to handle the fault. ; to handle the fault.
.macro MMU_BUS_FAULT_HANDLER handler, mmu, we, ex .macro MMU_BUS_FAULT_HANDLER handler, mmu, we, ex
.globl \handler .globl \handler
.type \handler,"function"
\handler: \handler:
SAVE_ALL SAVE_ALL
move \mmu, $srs ; Select MMU support register bank move \mmu, $srs ; Select MMU support register bank
...@@ -52,6 +53,7 @@ ...@@ -52,6 +53,7 @@
nop nop
ba ret_from_intr ba ret_from_intr
nop nop
.size \handler, . - \handler
.endm .endm
; Refill handler. Three cases may occur: ; Refill handler. Three cases may occur:
...@@ -84,6 +86,7 @@ ...@@ -84,6 +86,7 @@
2: .dword 0 ; last_refill_cause 2: .dword 0 ; last_refill_cause
.text .text
.globl \handler .globl \handler
.type \handler, "function"
\handler: \handler:
subq 4, $sp subq 4, $sp
; (The pipeline stalls for one cycle; $sp used as address in the next cycle.) ; (The pipeline stalls for one cycle; $sp used as address in the next cycle.)
...@@ -196,6 +199,7 @@ ...@@ -196,6 +199,7 @@
; Return ; Return
ba ret_from_intr ba ret_from_intr
nop nop
.size \handler, . - \handler
.endm .endm
; This is the MMU bus fault handlers. ; This is the MMU bus fault handlers.
......
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
# #
objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss --remove-section=.note.gnu.build-id
OBJCOPYFLAGS = -O binary $(objcopyflags-y) OBJCOPYFLAGS = -O binary $(objcopyflags-y)
......
...@@ -106,7 +106,7 @@ static unsigned outcnt = 0; /* bytes in output buffer */ ...@@ -106,7 +106,7 @@ static unsigned outcnt = 0; /* bytes in output buffer */
static void flush_window(void); static void flush_window(void);
static void error(char *m); static void error(char *m);
static void puts(const char *); static void aputs(const char *s);
extern char *input_data; /* lives in head.S */ extern char *input_data; /* lives in head.S */
...@@ -137,52 +137,37 @@ static inline void serout(const char *s, reg_scope_instances regi_ser) ...@@ -137,52 +137,37 @@ static inline void serout(const char *s, reg_scope_instances regi_ser)
REG_WR(ser, regi_ser, rw_dout, dout); REG_WR(ser, regi_ser, rw_dout, dout);
} }
#define SEROUT(S, N) \
do { \
serout(S, regi_ser ## N); \
s++; \
} while (0)
#else
#define SEROUT(S, N) do { \
while (!(*R_SERIAL ## N ## _STATUS & (1 << 5))) \
; \
*R_SERIAL ## N ## _TR_DATA = *s++; \
} while (0)
#endif #endif
static void puts(const char *s) static void aputs(const char *s)
{ {
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
while (*s) { while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0 #ifdef CONFIG_ETRAX_DEBUG_PORT0
#ifdef CONFIG_ETRAX_ARCH_V32 SEROUT(s, 0);
serout(s, regi_ser0);
#else
while (!(*R_SERIAL0_STATUS & (1 << 5)))
;
*R_SERIAL0_TR_DATA = *s++;
#endif
#endif #endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1 #ifdef CONFIG_ETRAX_DEBUG_PORT1
#ifdef CONFIG_ETRAX_ARCH_V32 SEROUT(s, 1);
serout(s, regi_ser1);
#else
while (!(*R_SERIAL1_STATUS & (1 << 5)))
;
*R_SERIAL1_TR_DATA = *s++;
#endif
#endif #endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2 #ifdef CONFIG_ETRAX_DEBUG_PORT2
#ifdef CONFIG_ETRAX_ARCH_V32 SEROUT(s, 2);
serout(s, regi_ser2);
#else
while (!(*R_SERIAL2_STATUS & (1 << 5)))
;
*R_SERIAL2_TR_DATA = *s++;
#endif
#endif #endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3 #ifdef CONFIG_ETRAX_DEBUG_PORT3
#ifdef CONFIG_ETRAX_ARCH_V32 SEROUT(s, 3);
serout(s, regi_ser3);
#else
while (!(*R_SERIAL3_STATUS & (1 << 5)))
;
*R_SERIAL3_TR_DATA = *s++;
#endif #endif
#endif
*s++;
} }
/* CONFIG_ETRAX_DEBUG_PORT_NULL */ #endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */
#endif
} }
void *memset(void *s, int c, size_t n) void *memset(void *s, int c, size_t n)
...@@ -233,9 +218,9 @@ static void flush_window(void) ...@@ -233,9 +218,9 @@ static void flush_window(void)
static void error(char *x) static void error(char *x)
{ {
puts("\n\n"); aputs("\n\n");
puts(x); aputs(x);
puts("\n\n -- System halted\n"); aputs("\n\n -- System halted\n");
while(1); /* Halt */ while(1); /* Halt */
} }
...@@ -378,14 +363,14 @@ void decompress_kernel(void) ...@@ -378,14 +363,14 @@ void decompress_kernel(void)
__asm__ volatile ("move $vr,%0" : "=rm" (revision)); __asm__ volatile ("move $vr,%0" : "=rm" (revision));
if (revision < compile_rev) { if (revision < compile_rev) {
#ifdef CONFIG_ETRAX_ARCH_V32 #ifdef CONFIG_ETRAX_ARCH_V32
puts("You need an ETRAX FS to run Linux 2.6/crisv32\n"); aputs("You need at least ETRAX FS to run Linux 2.6/crisv32\n");
#else #else
puts("You need an ETRAX 100LX to run linux 2.6\n"); aputs("You need an ETRAX 100LX to run linux 2.6/crisv10\n");
#endif #endif
while(1); while(1);
} }
puts("Uncompressing Linux...\n"); aputs("Uncompressing Linux...\n");
gunzip(); gunzip();
puts("Done. Now booting the kernel\n"); aputs("Done. Now booting the kernel\n");
} }
...@@ -7,6 +7,8 @@ ...@@ -7,6 +7,8 @@
#define L1_CACHE_BYTES 32 #define L1_CACHE_BYTES 32
#define L1_CACHE_SHIFT 5 #define L1_CACHE_SHIFT 5
#define __read_mostly __attribute__((__section__(".data.read_mostly")))
void flush_dma_list(dma_descr_data *descr); void flush_dma_list(dma_descr_data *descr);
void flush_dma_descr(dma_descr_data *descr, int flush_buf); void flush_dma_descr(dma_descr_data *descr, int flush_buf);
......
#ifndef _ASM_ARCH_CRIS_DMA_H #include "mach/dma.h"
#define _ASM_ARCH_CRIS_DMA_H
/* Defines for using and allocating dma channels. */
#define MAX_DMA_CHANNELS 10
#define NETWORK_ETH0_TX_DMA_NBR 0 /* Ethernet 0 out. */
#define NETWORK_ETH0 RX_DMA_NBR 1 /* Ethernet 0 in. */
#define IO_PROC_DMA0_TX_DMA_NBR 2 /* IO processor DMA0 out. */
#define IO_PROC_DMA0_RX_DMA_NBR 3 /* IO processor DMA0 in. */
#define ATA_TX_DMA_NBR 2 /* ATA interface out. */
#define ATA_RX_DMA_NBR 3 /* ATA interface in. */
#define ASYNC_SER2_TX_DMA_NBR 2 /* Asynchronous serial port 2 out. */
#define ASYNC_SER2_RX_DMA_NBR 3 /* Asynchronous serial port 2 in. */
#define IO_PROC_DMA1_TX_DMA_NBR 4 /* IO processor DMA1 out. */
#define IO_PROC_DMA1_RX_DMA_NBR 5 /* IO processor DMA1 in. */
#define ASYNC_SER1_TX_DMA_NBR 4 /* Asynchronous serial port 1 out. */
#define ASYNC_SER1_RX_DMA_NBR 5 /* Asynchronous serial port 1 in. */
#define SYNC_SER0_TX_DMA_NBR 4 /* Synchronous serial port 0 out. */
#define SYNC_SER0_RX_DMA_NBR 5 /* Synchronous serial port 0 in. */
#define EXTDMA0_TX_DMA_NBR 6 /* External DMA 0 out. */
#define EXTDMA1_RX_DMA_NBR 7 /* External DMA 1 in. */
#define ASYNC_SER0_TX_DMA_NBR 6 /* Asynchronous serial port 0 out. */
#define ASYNC_SER0_RX_DMA_NBR 7 /* Asynchronous serial port 0 in. */
#define SYNC_SER1_TX_DMA_NBR 6 /* Synchronous serial port 1 out. */
#define SYNC_SER1_RX_DMA_NBR 7 /* Synchronous serial port 1 in. */
#define NETWORK_ETH1_TX_DMA_NBR 6 /* Ethernet 1 out. */
#define NETWORK_ETH1_RX_DMA_NBR 7 /* Ethernet 1 in. */
#define EXTDMA2_TX_DMA_NBR 8 /* External DMA 2 out. */
#define EXTDMA3_RX_DMA_NBR 9 /* External DMA 3 in. */
#define STRCOP_TX_DMA_NBR 8 /* Stream co-processor out. */
#define STRCOP_RX_DMA_NBR 9 /* Stream co-processor in. */
#define ASYNC_SER3_TX_DMA_NBR 8 /* Asynchronous serial port 3 out. */
#define ASYNC_SER3_RX_DMA_NBR 9 /* Asynchronous serial port 3 in. */
enum dma_owner
{
dma_eth0,
dma_eth1,
dma_iop0,
dma_iop1,
dma_ser0,
dma_ser1,
dma_ser2,
dma_ser3,
dma_sser0,
dma_sser1,
dma_ata,
dma_strp,
dma_ext0,
dma_ext1,
dma_ext2,
dma_ext3
};
int crisv32_request_dma(unsigned int dmanr, const char * device_id,
unsigned options, unsigned bandwidth, enum dma_owner owner);
void crisv32_free_dma(unsigned int dmanr);
/* Masks used by crisv32_request_dma options: */
#define DMA_VERBOSE_ON_ERROR 1
#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR)
#define DMA_INT_MEM 4
#endif /* _ASM_ARCH_CRIS_DMA_H */
...@@ -46,10 +46,12 @@ static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val) ...@@ -46,10 +46,12 @@ static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val)
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&iopin->port->lock, flags); spin_lock_irqsave(&iopin->port->lock, flags);
if (iopin->port->data) {
if (val) if (val)
*iopin->port->data |= iopin->bit; *iopin->port->data |= iopin->bit;
else else
*iopin->port->data &= ~iopin->bit; *iopin->port->data &= ~iopin->bit;
}
spin_unlock_irqrestore(&iopin->port->lock, flags); spin_unlock_irqrestore(&iopin->port->lock, flags);
} }
...@@ -60,10 +62,12 @@ static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin, ...@@ -60,10 +62,12 @@ static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin,
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&iopin->port->lock, flags); spin_lock_irqsave(&iopin->port->lock, flags);
if (iopin->port->oe) {
if (dir == crisv32_io_dir_in) if (dir == crisv32_io_dir_in)
*iopin->port->oe &= ~iopin->bit; *iopin->port->oe &= ~iopin->bit;
else else
*iopin->port->oe |= iopin->bit; *iopin->port->oe |= iopin->bit;
}
spin_unlock_irqrestore(&iopin->port->lock, flags); spin_unlock_irqrestore(&iopin->port->lock, flags);
} }
......
#ifndef _ASM_ARCH_MEMMAP_H #include <mach/memmap.h>
#define _ASM_ARCH_MEMMAP_H
#define MEM_CSE0_START (0x00000000)
#define MEM_CSE0_SIZE (0x04000000)
#define MEM_CSE1_START (0x04000000)
#define MEM_CSE1_SIZE (0x04000000)
#define MEM_CSR0_START (0x08000000)
#define MEM_CSR1_START (0x0c000000)
#define MEM_CSP0_START (0x10000000)
#define MEM_CSP1_START (0x14000000)
#define MEM_CSP2_START (0x18000000)
#define MEM_CSP3_START (0x1c000000)
#define MEM_CSP4_START (0x20000000)
#define MEM_CSP5_START (0x24000000)
#define MEM_CSP6_START (0x28000000)
#define MEM_CSP7_START (0x2c000000)
#define MEM_INTMEM_START (0x38000000)
#define MEM_INTMEM_SIZE (0x00020000)
#define MEM_DRAM_START (0x40000000)
#define MEM_NON_CACHEABLE (0x80000000)
#endif
...@@ -2,8 +2,16 @@ ...@@ -2,8 +2,16 @@
#define _ASM_CRIS_ARCH_PGTABLE_H #define _ASM_CRIS_ARCH_PGTABLE_H
/* Define the kernels virtual memory area. */ /* Define the kernels virtual memory area. */
/* See head.S for differences between ARTPEC-3 and ETRAX FS. */
#ifdef CONFIG_CRIS_MACH_ARTPEC3
#define VMALLOC_START KSEG_E
#define VMALLOC_END KSEG_F
#else
#define VMALLOC_START KSEG_D #define VMALLOC_START KSEG_D
#define VMALLOC_END KSEG_E #define VMALLOC_END KSEG_E
#endif
#define VMALLOC_VMADDR(x) ((unsigned long)(x)) #define VMALLOC_VMADDR(x) ((unsigned long)(x))
#endif /* _ASM_CRIS_ARCH_PGTABLE_H */ #endif /* _ASM_CRIS_ARCH_PGTABLE_H */
...@@ -122,14 +122,14 @@ __do_strncpy_from_user(char *dst, const char *src, long count) ...@@ -122,14 +122,14 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
__asm__ __volatile__ ( __asm__ __volatile__ (
" move.d %3,%0\n" " move.d %3,%0\n"
"5: move.b [%2+],$acr\n" "5: move.b [%2+],$acr\n"
"1: beq 2f\n" "1: beq 6f\n"
" move.b $acr,[%1+]\n" " move.b $acr,[%1+]\n"
" subq 1,%0\n" " subq 1,%0\n"
"2: bne 1b\n" "2: bne 1b\n"
" move.b [%2+],$acr\n" " move.b [%2+],$acr\n"
" sub.d %3,%0\n" "6: sub.d %3,%0\n"
" neg.d %0,%0\n" " neg.d %0,%0\n"
"3:\n" "3:\n"
" .section .fixup,\"ax\"\n" " .section .fixup,\"ax\"\n"
...@@ -140,8 +140,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count) ...@@ -140,8 +140,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
/* The address for a fault at the first move is trivial. /* The address for a fault at the first move is trivial.
The address for a fault at the second move is that of The address for a fault at the second move is that of
the preceding branch insn, since the move insn is in the preceding branch insn, since the move insn is in
its delay-slot. That address is also a branch its delay-slot. Just so you don't get confused... */
target. Just so you don't get confused... */
" .previous\n" " .previous\n"
" .section __ex_table,\"a\"\n" " .section __ex_table,\"a\"\n"
" .dword 5b,4b\n" " .dword 5b,4b\n"
......
...@@ -5,6 +5,33 @@ ...@@ -5,6 +5,33 @@
#define MAX_DMA_CHANNELS 12 /* 8 and 10 not used. */ #define MAX_DMA_CHANNELS 12 /* 8 and 10 not used. */
#define NETWORK_ETH_TX_DMA_NBR 0 /* Ethernet 0 out. */
#define NETWORK_ETH_RX_DMA_NBR 1 /* Ethernet 0 in. */
#define IO_PROC_DMA_TX_DMA_NBR 4 /* IO processor DMA0 out. */
#define IO_PROC_DMA_RX_DMA_NBR 5 /* IO processor DMA0 in. */
#define ASYNC_SER3_TX_DMA_NBR 2 /* Asynchronous serial port 3 out. */
#define ASYNC_SER3_RX_DMA_NBR 3 /* Asynchronous serial port 3 in. */
#define ASYNC_SER2_TX_DMA_NBR 6 /* Asynchronous serial port 2 out. */
#define ASYNC_SER2_RX_DMA_NBR 7 /* Asynchronous serial port 2 in. */
#define ASYNC_SER1_TX_DMA_NBR 4 /* Asynchronous serial port 1 out. */
#define ASYNC_SER1_RX_DMA_NBR 5 /* Asynchronous serial port 1 in. */
#define SYNC_SER_TX_DMA_NBR 6 /* Synchronous serial port 0 out. */
#define SYNC_SER_RX_DMA_NBR 7 /* Synchronous serial port 0 in. */
#define ASYNC_SER0_TX_DMA_NBR 0 /* Asynchronous serial port 0 out. */
#define ASYNC_SER0_RX_DMA_NBR 1 /* Asynchronous serial port 0 in. */
#define STRCOP_TX_DMA_NBR 2 /* Stream co-processor out. */
#define STRCOP_RX_DMA_NBR 3 /* Stream co-processor in. */
#define dma_eth0 dma_eth
#define dma_eth1 dma_eth
enum dma_owner { enum dma_owner {
dma_eth, dma_eth,
dma_ser0, dma_ser0,
......
#ifndef STARTUP_INC_INCLUDED
#define STARTUP_INC_INCLUDED
#include <hwregs/asm/reg_map_asm.h> #include <hwregs/asm/reg_map_asm.h>
#include <hwregs/asm/gio_defs_asm.h> #include <hwregs/asm/gio_defs_asm.h>
#include <hwregs/asm/pio_defs_asm.h> #include <hwregs/asm/pio_defs_asm.h>
#include <hwregs/asm/clkgen_defs_asm.h> #include <hwregs/asm/clkgen_defs_asm.h>
#include <hwregs/asm/pinmux_defs_asm.h> #include <hwregs/asm/pinmux_defs_asm.h>
.macro GIO_SET_P BITS, OUTREG
bmi 1f ; btstq: bit -> N flag
nop
or.d \BITS, \OUTREG
1:
.endm
.macro GIO_INIT .macro GIO_INIT
move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0
move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1
...@@ -32,10 +42,23 @@ ...@@ -32,10 +42,23 @@
move.d 0xFFFFFFFF, $r0 move.d 0xFFFFFFFF, $r0
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1 move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1
move.d $r0, [$r1] move.d $r0, [$r1]
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
move.d $r0, [$r1]
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1 move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1
move.d $r0, [$r1] move.d $r0, [$r1]
;; If eth_mdio, eth, geth bits are set in hwprot, don't
;; set them to gpio, as this means they have been configured
;; earlier and shouldn't be changed.
move.d 0xFC000000, $r2 ; pins 25..0 are eth_mdio, eth, geth
move.d REG_ADDR(pinmux, regi_pinmux, rw_hwprot), $r1
move.d [$r1], $r0
btstq REG_BIT(pinmux, rw_hwprot, eth), $r0
GIO_SET_P 0x00FFFF00, $r2 ;; pins 8..23 are eth
btstq REG_BIT(pinmux, rw_hwprot, eth_mdio), $r0
GIO_SET_P 0x03000000, $r2 ;; pins 24..25 are eth_mdio
btstq REG_BIT(pinmux, rw_hwprot, geth), $r0
GIO_SET_P 0x000000FF, $r2 ;; pins 0..7 are geth
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
move.d $r2, [$r1]
.endm .endm
.macro START_CLOCKS .macro START_CLOCKS
...@@ -58,3 +81,4 @@ ...@@ -58,3 +81,4 @@
move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1 move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1
move.d $r1, [$r0] move.d $r1, [$r0]
.endm .endm
#endif
#ifndef _ASM_ARCH_CRIS_DMA_H
#define _ASM_ARCH_CRIS_DMA_H
/* Defines for using and allocating dma channels. */
#define MAX_DMA_CHANNELS 10
#define NETWORK_ETH0_TX_DMA_NBR 0 /* Ethernet 0 out. */
#define NETWORK_ETH0 RX_DMA_NBR 1 /* Ethernet 0 in. */
#define IO_PROC_DMA0_TX_DMA_NBR 2 /* IO processor DMA0 out. */
#define IO_PROC_DMA0_RX_DMA_NBR 3 /* IO processor DMA0 in. */
#define ATA_TX_DMA_NBR 2 /* ATA interface out. */
#define ATA_RX_DMA_NBR 3 /* ATA interface in. */
#define ASYNC_SER2_TX_DMA_NBR 2 /* Asynchronous serial port 2 out. */
#define ASYNC_SER2_RX_DMA_NBR 3 /* Asynchronous serial port 2 in. */
#define IO_PROC_DMA1_TX_DMA_NBR 4 /* IO processor DMA1 out. */
#define IO_PROC_DMA1_RX_DMA_NBR 5 /* IO processor DMA1 in. */
#define ASYNC_SER1_TX_DMA_NBR 4 /* Asynchronous serial port 1 out. */
#define ASYNC_SER1_RX_DMA_NBR 5 /* Asynchronous serial port 1 in. */
#define SYNC_SER0_TX_DMA_NBR 4 /* Synchronous serial port 0 out. */
#define SYNC_SER0_RX_DMA_NBR 5 /* Synchronous serial port 0 in. */
#define EXTDMA0_TX_DMA_NBR 6 /* External DMA 0 out. */
#define EXTDMA1_RX_DMA_NBR 7 /* External DMA 1 in. */
#define ASYNC_SER0_TX_DMA_NBR 6 /* Asynchronous serial port 0 out. */
#define ASYNC_SER0_RX_DMA_NBR 7 /* Asynchronous serial port 0 in. */
#define SYNC_SER1_TX_DMA_NBR 6 /* Synchronous serial port 1 out. */
#define SYNC_SER1_RX_DMA_NBR 7 /* Synchronous serial port 1 in. */
#define NETWORK_ETH1_TX_DMA_NBR 6 /* Ethernet 1 out. */
#define NETWORK_ETH1_RX_DMA_NBR 7 /* Ethernet 1 in. */
#define EXTDMA2_TX_DMA_NBR 8 /* External DMA 2 out. */
#define EXTDMA3_RX_DMA_NBR 9 /* External DMA 3 in. */
#define STRCOP_TX_DMA_NBR 8 /* Stream co-processor out. */
#define STRCOP_RX_DMA_NBR 9 /* Stream co-processor in. */
#define ASYNC_SER3_TX_DMA_NBR 8 /* Asynchronous serial port 3 out. */
#define ASYNC_SER3_RX_DMA_NBR 9 /* Asynchronous serial port 3 in. */
enum dma_owner {
dma_eth0,
dma_eth1,
dma_iop0,
dma_iop1,
dma_ser0,
dma_ser1,
dma_ser2,
dma_ser3,
dma_sser0,
dma_sser1,
dma_ata,
dma_strp,
dma_ext0,
dma_ext1,
dma_ext2,
dma_ext3
};
int crisv32_request_dma(unsigned int dmanr, const char *device_id,
unsigned options, unsigned bandwidth,
enum dma_owner owner);
void crisv32_free_dma(unsigned int dmanr);
/* Masks used by crisv32_request_dma options: */
#define DMA_VERBOSE_ON_ERROR 1
#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR)
#define DMA_INT_MEM 4
#endif /* _ASM_ARCH_CRIS_DMA_H */
#ifndef _ASM_ARCH_MEMMAP_H
#define _ASM_ARCH_MEMMAP_H
#define MEM_CSE0_START (0x00000000)
#define MEM_CSE0_SIZE (0x04000000)
#define MEM_CSE1_START (0x04000000)
#define MEM_CSE1_SIZE (0x04000000)
#define MEM_CSR0_START (0x08000000)
#define MEM_CSR1_START (0x0c000000)
#define MEM_CSP0_START (0x10000000)
#define MEM_CSP1_START (0x14000000)
#define MEM_CSP2_START (0x18000000)
#define MEM_CSP3_START (0x1c000000)
#define MEM_CSP4_START (0x20000000)
#define MEM_CSP5_START (0x24000000)
#define MEM_CSP6_START (0x28000000)
#define MEM_CSP7_START (0x2c000000)
#define MEM_INTMEM_START (0x38000000)
#define MEM_INTMEM_SIZE (0x00020000)
#define MEM_DRAM_START (0x40000000)
#define MEM_NON_CACHEABLE (0x80000000)
#endif
#ifndef STARTUP_INC_INCLUDED
#define STARTUP_INC_INCLUDED
#include <hwregs/asm/reg_map_asm.h> #include <hwregs/asm/reg_map_asm.h>
#include <hwregs/asm/bif_core_defs_asm.h> #include <hwregs/asm/bif_core_defs_asm.h>
#include <hwregs/asm/gio_defs_asm.h> #include <hwregs/asm/gio_defs_asm.h>
...@@ -75,3 +78,5 @@ ...@@ -75,3 +78,5 @@
move.d $r10, [$r11] move.d $r10, [$r11]
#endif #endif
.endm .endm
#endif
...@@ -21,31 +21,35 @@ ...@@ -21,31 +21,35 @@
* /dev/leds minor 2, Access to leds depending on kernelconfig * /dev/leds minor 2, Access to leds depending on kernelconfig
* *
* For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3): * For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3):
* /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction * /dev/gpioa minor 0, 32 bit GPIO, each bit can change direction
* /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction * /dev/gpiob minor 1, 32 bit GPIO, each bit can change direction
* /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction * /dev/gpioc minor 3, 16 bit GPIO, each bit can change direction
* /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction * /dev/gpiod minor 4, 32 bit GPIO, input only
* /dev/leds minor 2, Access to leds depending on kernelconfig * /dev/leds minor 2, Access to leds depending on kernelconfig
* /dev/pwm0 minor 16, PWM channel 0 on PA30 * /dev/pwm0 minor 16, PWM channel 0 on PA30
* /dev/pwm1 minor 17, PWM channel 1 on PA31 * /dev/pwm1 minor 17, PWM channel 1 on PA31
* /dev/pwm2 minor 18, PWM channel 2 on PB26 * /dev/pwm2 minor 18, PWM channel 2 on PB26
* /dev/ppwm minor 19, PPWM channel
* *
*/ */
#ifndef _ASM_ETRAXGPIO_H #ifndef _ASM_ETRAXGPIO_H
#define _ASM_ETRAXGPIO_H #define _ASM_ETRAXGPIO_H
#define GPIO_MINOR_FIRST 0
#define ETRAXGPIO_IOCTYPE 43
/* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */ /* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */
#ifdef CONFIG_ETRAX_ARCH_V10 #ifdef CONFIG_ETRAX_ARCH_V10
#define ETRAXGPIO_IOCTYPE 43
#define GPIO_MINOR_A 0 #define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1 #define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2 #define GPIO_MINOR_LEDS 2
#define GPIO_MINOR_G 3 #define GPIO_MINOR_G 3
#define GPIO_MINOR_LAST 3 #define GPIO_MINOR_LAST 3
#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
#endif #endif
#ifdef CONFIG_ETRAXFS #ifdef CONFIG_ETRAXFS
#define ETRAXGPIO_IOCTYPE 43
#define GPIO_MINOR_A 0 #define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1 #define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2 #define GPIO_MINOR_LEDS 2
...@@ -58,10 +62,10 @@ ...@@ -58,10 +62,10 @@
#else #else
#define GPIO_MINOR_LAST 5 #define GPIO_MINOR_LAST 5
#endif #endif
#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
#endif #endif
#ifdef CONFIG_CRIS_MACH_ARTPEC3 #ifdef CONFIG_CRIS_MACH_ARTPEC3
#define ETRAXGPIO_IOCTYPE 43
#define GPIO_MINOR_A 0 #define GPIO_MINOR_A 0
#define GPIO_MINOR_B 1 #define GPIO_MINOR_B 1
#define GPIO_MINOR_LEDS 2 #define GPIO_MINOR_LEDS 2
...@@ -73,12 +77,17 @@ ...@@ -73,12 +77,17 @@
#else #else
#define GPIO_MINOR_LAST 4 #define GPIO_MINOR_LAST 4
#endif #endif
#define GPIO_MINOR_PWM0 16 #define GPIO_MINOR_FIRST_PWM 16
#define GPIO_MINOR_PWM1 17 #define GPIO_MINOR_PWM0 (GPIO_MINOR_FIRST_PWM+0)
#define GPIO_MINOR_PWM2 18 #define GPIO_MINOR_PWM1 (GPIO_MINOR_FIRST_PWM+1)
#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PWM2 #define GPIO_MINOR_PWM2 (GPIO_MINOR_FIRST_PWM+2)
#define GPIO_MINOR_PPWM (GPIO_MINOR_FIRST_PWM+3)
#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PPWM
#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST_PWM
#endif #endif
/* supported ioctl _IOC_NR's */ /* supported ioctl _IOC_NR's */
#define IO_READBITS 0x1 /* read and return current port bits (obsolete) */ #define IO_READBITS 0x1 /* read and return current port bits (obsolete) */
...@@ -125,12 +134,10 @@ ...@@ -125,12 +134,10 @@
*/ */
#define IO_READ_INBITS 0x10 /* *arg is result of reading the input pins */ #define IO_READ_INBITS 0x10 /* *arg is result of reading the input pins */
#define IO_READ_OUTBITS 0x11 /* *arg is result of reading the output shadow */ #define IO_READ_OUTBITS 0x11 /* *arg is result of reading the output shadow */
#define IO_SETGET_INPUT 0x12 /* bits set in *arg is set to input, #define IO_SETGET_INPUT 0x12 /* bits set in *arg is set to input, */
* *arg updated with current input pins. /* *arg updated with current input pins. */
*/ #define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, */
#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, /* *arg updated with current output pins. */
* *arg updated with current output pins.
*/
/* The following ioctl's are applicable to the PWM channels only */ /* The following ioctl's are applicable to the PWM channels only */
...@@ -140,7 +147,8 @@ enum io_pwm_mode { ...@@ -140,7 +147,8 @@ enum io_pwm_mode {
PWM_OFF = 0, /* disabled, deallocated */ PWM_OFF = 0, /* disabled, deallocated */
PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */ PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */
PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */ PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */
PWM_VARFREQ = 3 /* individually configurable high/low periods */ PWM_VARFREQ = 3, /* individually configurable high/low periods */
PWM_SOFT = 4 /* software generated */
}; };
struct io_pwm_set_mode { struct io_pwm_set_mode {
...@@ -176,4 +184,56 @@ struct io_pwm_set_duty { ...@@ -176,4 +184,56 @@ struct io_pwm_set_duty {
int duty; /* 0..255 */ int duty; /* 0..255 */
}; };
/* Returns information about the latest PWM pulse.
* lo: Length of the latest low period, in units of 10ns.
* hi: Length of the latest high period, in units of 10ns.
* cnt: Time since last detected edge, in units of 10ns.
*
* The input source to PWM is decied by IO_PWM_SET_INPUT_SRC.
*
* NOTE: All PWM devices is connected to the same input source.
*/
#define IO_PWM_GET_PERIOD 0x23
struct io_pwm_get_period {
unsigned int lo;
unsigned int hi;
unsigned int cnt;
};
/* Sets the input source for the PWM input. For the src value see the
* register description for gio:rw_pwm_in_cfg.
*
* NOTE: All PWM devices is connected to the same input source.
*/
#define IO_PWM_SET_INPUT_SRC 0x24
struct io_pwm_set_input_src {
unsigned int src; /* 0..7 */
};
/* Sets the duty cycles in steps of 1/256, 0 = 0%, 255 = 100% duty cycle */
#define IO_PPWM_SET_DUTY 0x25
struct io_ppwm_set_duty {
int duty; /* 0..255 */
};
/* Configuraton struct for the IO_PWMCLK_SET_CONFIG ioctl to configure
* PWM capable gpio pins:
*/
#define IO_PWMCLK_SETGET_CONFIG 0x26
struct gpio_pwmclk_conf {
unsigned int gpiopin; /* The pin number based on the opened device */
unsigned int baseclk; /* The base clock to use, or sw will select one close*/
unsigned int low; /* The number of low periods of the baseclk */
unsigned int high; /* The number of high periods of the baseclk */
};
/* Examples:
* To get a symmetric 12 MHz clock without knowing anything about the hardware:
* baseclk = 12000000, low = 0, high = 0
* To just get info of current setting:
* baseclk = 0, low = 0, high = 0, the values will be updated by driver.
*/
#endif #endif
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#define SSP_OPOLARITY _IOR('S', 4, unsigned int) #define SSP_OPOLARITY _IOR('S', 4, unsigned int)
#define SSP_SPI _IOR('S', 5, unsigned int) #define SSP_SPI _IOR('S', 5, unsigned int)
#define SSP_INBUFCHUNK _IOR('S', 6, unsigned int) #define SSP_INBUFCHUNK _IOR('S', 6, unsigned int)
#define SSP_INPUT _IOR('S', 7, unsigned int)
/* Values for SSP_SPEED */ /* Values for SSP_SPEED */
#define SSP150 0 #define SSP150 0
...@@ -37,6 +38,7 @@ ...@@ -37,6 +38,7 @@
#define SSP921600 13 #define SSP921600 13
#define SSP3125000 14 #define SSP3125000 14
#define CODEC 15 #define CODEC 15
#define CODEC_f32768 16
#define FREQ_4MHz 0 #define FREQ_4MHz 0
#define FREQ_2MHz 1 #define FREQ_2MHz 1
...@@ -46,9 +48,14 @@ ...@@ -46,9 +48,14 @@
#define FREQ_128kHz 5 #define FREQ_128kHz 5
#define FREQ_64kHz 6 #define FREQ_64kHz 6
#define FREQ_32kHz 7 #define FREQ_32kHz 7
/* FREQ_* with values where bit (value & 0x10) is set are */
/* used for CODEC_f32768 */
#define FREQ_4096kHz 16 /* CODEC_f32768 */
/* Used by application to set CODEC divider, word rate and frame rate */ /* Used by application to set CODEC divider, word rate and frame rate */
#define CODEC_VAL(freq, clk_per_sync, sync_per_frame) (CODEC | (freq << 8) | (clk_per_sync << 16) | (sync_per_frame << 28)) #define CODEC_VAL(freq, clk_per_sync, sync_per_frame) \
((CODEC + ((freq & 0x10) >> 4)) | (freq << 8) | \
(clk_per_sync << 16) | (sync_per_frame << 28))
/* Used by driver to extract speed */ /* Used by driver to extract speed */
#define GET_SPEED(x) (x & 0xff) #define GET_SPEED(x) (x & 0xff)
...@@ -68,6 +75,7 @@ ...@@ -68,6 +75,7 @@
#define NORMAL_SYNC 1 #define NORMAL_SYNC 1
#define EARLY_SYNC 2 #define EARLY_SYNC 2
#define SECOND_WORD_SYNC 0x40000 #define SECOND_WORD_SYNC 0x40000
#define LATE_SYNC 0x80000
#define BIT_SYNC 4 #define BIT_SYNC 4
#define WORD_SYNC 8 #define WORD_SYNC 8
...@@ -104,4 +112,21 @@ ...@@ -104,4 +112,21 @@
/* Values for SSP_INBUFCHUNK */ /* Values for SSP_INBUFCHUNK */
/* plain integer with the size of DMA chunks */ /* plain integer with the size of DMA chunks */
/* To ensure that the timestamps are aligned with the data being read
* the read length MUST be a multiple of the length of the DMA buffers.
*
* Use a multiple of SSP_INPUT_CHUNK_SIZE defined below.
*/
#define SSP_INPUT_CHUNK_SIZE 256
/* Request struct to pass through the ioctl interface to read
* data with timestamps.
*/
struct ssp_request {
char __user *buf; /* Where to put the data. */
size_t len; /* Size of buf. MUST be a multiple of */
/* SSP_INPUT_CHUNK_SIZE! */
struct timespec ts; /* The time the data was sampled. */
};
#endif #endif
...@@ -9,12 +9,11 @@ ...@@ -9,12 +9,11 @@
#define SAMPLE_BUFFER_SIZE 8192 #define SAMPLE_BUFFER_SIZE 8192
static char* sample_buffer; static char *sample_buffer;
static char* sample_buffer_pos; static char *sample_buffer_pos;
static int prof_running = 0; static int prof_running = 0;
void void cris_profile_sample(struct pt_regs *regs)
cris_profile_sample(struct pt_regs* regs)
{ {
if (!prof_running) if (!prof_running)
return; return;
...@@ -24,7 +23,7 @@ cris_profile_sample(struct pt_regs* regs) ...@@ -24,7 +23,7 @@ cris_profile_sample(struct pt_regs* regs)
else else
*(unsigned int*)sample_buffer_pos = 0; *(unsigned int*)sample_buffer_pos = 0;
*(unsigned int*)(sample_buffer_pos + 4) = instruction_pointer(regs); *(unsigned int *)(sample_buffer_pos + 4) = instruction_pointer(regs);
sample_buffer_pos += 8; sample_buffer_pos += 8;
if (sample_buffer_pos == sample_buffer + SAMPLE_BUFFER_SIZE) if (sample_buffer_pos == sample_buffer + SAMPLE_BUFFER_SIZE)
...@@ -54,6 +53,7 @@ write_cris_profile(struct file *file, const char __user *buf, ...@@ -54,6 +53,7 @@ write_cris_profile(struct file *file, const char __user *buf,
{ {
sample_buffer_pos = sample_buffer; sample_buffer_pos = sample_buffer;
memset(sample_buffer, 0, SAMPLE_BUFFER_SIZE); memset(sample_buffer, 0, SAMPLE_BUFFER_SIZE);
return count < SAMPLE_BUFFER_SIZE ? count : SAMPLE_BUFFER_SIZE;
} }
static const struct file_operations cris_proc_profile_operations = { static const struct file_operations cris_proc_profile_operations = {
...@@ -61,8 +61,7 @@ static const struct file_operations cris_proc_profile_operations = { ...@@ -61,8 +61,7 @@ static const struct file_operations cris_proc_profile_operations = {
.write = write_cris_profile, .write = write_cris_profile,
}; };
static int static int __init init_cris_profile(void)
__init init_cris_profile(void)
{ {
struct proc_dir_entry *entry; struct proc_dir_entry *entry;
...@@ -82,5 +81,5 @@ __init init_cris_profile(void) ...@@ -82,5 +81,5 @@ __init init_cris_profile(void)
return 0; return 0;
} }
__initcall(init_cris_profile); __initcall(init_cris_profile);
...@@ -39,6 +39,8 @@ int have_rtc; /* used to remember if we have an RTC or not */; ...@@ -39,6 +39,8 @@ int have_rtc; /* used to remember if we have an RTC or not */;
extern unsigned long loops_per_jiffy; /* init/main.c */ extern unsigned long loops_per_jiffy; /* init/main.c */
unsigned long loops_per_usec; unsigned long loops_per_usec;
#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
extern unsigned long do_slow_gettimeoffset(void); extern unsigned long do_slow_gettimeoffset(void);
static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset; static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
...@@ -46,6 +48,7 @@ u32 arch_gettimeoffset(void) ...@@ -46,6 +48,7 @@ u32 arch_gettimeoffset(void)
{ {
return do_gettimeoffset() * 1000; return do_gettimeoffset() * 1000;
} }
#endif
/* /*
* BUG: This routine does not handle hour overflow properly; it just * BUG: This routine does not handle hour overflow properly; it just
...@@ -151,7 +154,7 @@ cris_do_profile(struct pt_regs* regs) ...@@ -151,7 +154,7 @@ cris_do_profile(struct pt_regs* regs)
unsigned long long sched_clock(void) unsigned long long sched_clock(void)
{ {
return (unsigned long long)jiffies * (1000000000 / HZ) + return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ) +
get_ns_in_jiffie(); get_ns_in_jiffie();
} }
......
...@@ -58,6 +58,8 @@ SECTIONS ...@@ -58,6 +58,8 @@ SECTIONS
___data_start = . ; ___data_start = . ;
__Sdata = . ; __Sdata = . ;
.data : { /* Data */ .data : { /* Data */
CACHELINE_ALIGNED_DATA(32)
READ_MOSTLY_DATA(32)
DATA_DATA DATA_DATA
} }
__edata = . ; /* End of data section. */ __edata = . ; /* End of data section. */
...@@ -84,6 +86,16 @@ SECTIONS ...@@ -84,6 +86,16 @@ SECTIONS
} }
SECURITY_INIT SECURITY_INIT
/* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
*/
.exit.text : {
EXIT_TEXT
}
.exit.data : {
EXIT_DATA
}
#ifdef CONFIG_ETRAX_ARCH_V10 #ifdef CONFIG_ETRAX_ARCH_V10
#ifdef CONFIG_BLK_DEV_INITRD #ifdef CONFIG_BLK_DEV_INITRD
.init.ramfs : { .init.ramfs : {
...@@ -112,7 +124,7 @@ SECTIONS ...@@ -112,7 +124,7 @@ SECTIONS
__init_end = .; __init_end = .;
__data_end = . ; /* Move to _edata ? */ __data_end = . ; /* Move to _edata ? */
BSS_SECTION(0, 0, 0) BSS_SECTION(1, 1, 1)
. = ALIGN (0x20); . = ALIGN (0x20);
_end = .; _end = .;
......
/* /*
* linux/arch/cris/mm/fault.c * arch/cris/mm/fault.c
*
* Copyright (C) 2000-2006 Axis Communications AB
*
* Authors: Bjorn Wesen
* *
* Copyright (C) 2000-2010 Axis Communications AB
*/ */
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/wait.h>
#include <asm/uaccess.h> #include <asm/uaccess.h>
extern int find_fixup_code(struct pt_regs *); extern int find_fixup_code(struct pt_regs *);
extern void die_if_kernel(const char *, struct pt_regs *, long); extern void die_if_kernel(const char *, struct pt_regs *, long);
extern void show_registers(struct pt_regs *regs);
/* debug of low-level TLB reload */ /* debug of low-level TLB reload */
#undef DEBUG #undef DEBUG
...@@ -108,11 +107,11 @@ do_page_fault(unsigned long address, struct pt_regs *regs, ...@@ -108,11 +107,11 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
info.si_code = SEGV_MAPERR; info.si_code = SEGV_MAPERR;
/* /*
* If we're in an interrupt or have no user * If we're in an interrupt or "atomic" operation or have no
* context, we must not take the fault.. * user context, we must not take the fault.
*/ */
if (in_interrupt() || !mm) if (in_atomic() || !mm)
goto no_context; goto no_context;
down_read(&mm->mmap_sem); down_read(&mm->mmap_sem);
...@@ -193,14 +192,25 @@ do_page_fault(unsigned long address, struct pt_regs *regs, ...@@ -193,14 +192,25 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
/* User mode accesses just cause a SIGSEGV */ /* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) { if (user_mode(regs)) {
printk(KERN_NOTICE "%s (pid %d) segfaults for page "
"address %08lx at pc %08lx\n",
tsk->comm, tsk->pid,
address, instruction_pointer(regs));
/* With DPG on, we've already dumped registers above. */
DPG(if (0))
show_registers(regs);
#ifdef CONFIG_NO_SEGFAULT_TERMINATION
DECLARE_WAIT_QUEUE_HEAD(wq);
wait_event_interruptible(wq, 0 == 1);
#else
info.si_signo = SIGSEGV; info.si_signo = SIGSEGV;
info.si_errno = 0; info.si_errno = 0;
/* info.si_code has been set above */ /* info.si_code has been set above */
info.si_addr = (void *)address; info.si_addr = (void *)address;
force_sig_info(SIGSEGV, &info, tsk); force_sig_info(SIGSEGV, &info, tsk);
printk(KERN_NOTICE "%s (pid %d) segfaults for page " #endif
"address %08lx at pc %08lx\n",
tsk->comm, tsk->pid, address, instruction_pointer(regs));
return; return;
} }
...@@ -245,10 +255,10 @@ do_page_fault(unsigned long address, struct pt_regs *regs, ...@@ -245,10 +255,10 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
out_of_memory: out_of_memory:
up_read(&mm->mmap_sem); up_read(&mm->mmap_sem);
printk("VM: killing process %s\n", tsk->comm); if (!user_mode(regs))
if (user_mode(regs))
do_exit(SIGKILL);
goto no_context; goto no_context;
pagefault_out_of_memory();
return;
do_sigbus: do_sigbus:
up_read(&mm->mmap_sem); up_read(&mm->mmap_sem);
...@@ -334,8 +344,11 @@ int ...@@ -334,8 +344,11 @@ int
find_fixup_code(struct pt_regs *regs) find_fixup_code(struct pt_regs *regs)
{ {
const struct exception_table_entry *fixup; const struct exception_table_entry *fixup;
/* in case of delay slot fault (v32) */
unsigned long ip = (instruction_pointer(regs) & ~0x1);
if ((fixup = search_exception_tables(instruction_pointer(regs))) != 0) { fixup = search_exception_tables(ip);
if (fixup != 0) {
/* Adjust the instruction pointer in the stackframe. */ /* Adjust the instruction pointer in the stackframe. */
instruction_pointer(regs) = fixup->fixup; instruction_pointer(regs) = fixup->fixup;
arch_fixup(regs); arch_fixup(regs);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment