Commit 543a1b85 authored by Vishal Kulkarni's avatar Vishal Kulkarni Committed by David S. Miller

cxgb4: Add capability to get/set SGE Doorbell Queue Timer Tick

This patch gets/sets SGE Doorbell Queue timer ticks via ethtool

Original work by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: default avatarVishal Kulkarni <vishal@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d429005f
......@@ -819,6 +819,7 @@ struct sge {
u16 nqs_per_uld; /* # of Rx queues per ULD */
u16 timer_val[SGE_NTIMERS];
u8 counter_val[SGE_NCOUNTERS];
u16 dbqtimer_tick;
u16 dbqtimer_val[SGE_NDBQTIMERS];
u32 fl_pg_order; /* large page allocation size */
u32 stat_len; /* length of status page at ring end */
......
......@@ -932,11 +932,190 @@ static int get_adaptive_rx_setting(struct net_device *dev)
return q->rspq.adaptive_rx;
}
static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
/* Return the current global Adapter SGE Doorbell Queue Timer Tick for all
* Ethernet TX Queues.
*/
static int get_dbqtimer_tick(struct net_device *dev)
{
struct port_info *pi = netdev_priv(dev);
struct adapter *adap = pi->adapter;
if (!(adap->flags & SGE_DBQ_TIMER))
return 0;
return adap->sge.dbqtimer_tick;
}
/* Return the SGE Doorbell Queue Timer Value for the Ethernet TX Queues
* associated with a Network Device.
*/
static int get_dbqtimer(struct net_device *dev)
{
struct port_info *pi = netdev_priv(dev);
struct adapter *adap = pi->adapter;
struct sge_eth_txq *txq;
txq = &adap->sge.ethtxq[pi->first_qset];
if (!(adap->flags & SGE_DBQ_TIMER))
return 0;
/* all of the TX Queues use the same Timer Index */
return adap->sge.dbqtimer_val[txq->dbqtimerix];
}
/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX
* Queues. This is the fundamental "Tick" that sets the scale of values which
* can be used. Individual Ethernet TX Queues index into a relatively small
* array of Tick Multipliers. Changing the base Tick will thus change all of
* the resulting Timer Values associated with those multipliers for all
* Ethernet TX Queues.
*/
static int set_dbqtimer_tick(struct net_device *dev, int usecs)
{
struct port_info *pi = netdev_priv(dev);
struct adapter *adap = pi->adapter;
struct sge *s = &adap->sge;
u32 param, val;
int ret;
if (!(adap->flags & SGE_DBQ_TIMER))
return 0;
/* return early if it's the same Timer Tick we're already using */
if (s->dbqtimer_tick == usecs)
return 0;
/* attempt to set the new Timer Tick value */
param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK));
val = usecs;
ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, &param, &val);
if (ret)
return ret;
s->dbqtimer_tick = usecs;
/* if successful, reread resulting dependent Timer values */
ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(s->dbqtimer_val),
s->dbqtimer_val);
return ret;
}
/* Set the SGE Doorbell Queue Timer Value for the Ethernet TX Queues
* associated with a Network Device. There is a relatively small array of
* possible Timer Values so we need to pick the closest value available.
*/
static int set_dbqtimer(struct net_device *dev, int usecs)
{
set_adaptive_rx_setting(dev, c->use_adaptive_rx_coalesce);
return set_rx_intr_params(dev, c->rx_coalesce_usecs,
c->rx_max_coalesced_frames);
int qix, timerix, min_timerix, delta, min_delta;
struct port_info *pi = netdev_priv(dev);
struct adapter *adap = pi->adapter;
struct sge *s = &adap->sge;
struct sge_eth_txq *txq;
u32 param, val;
int ret;
if (!(adap->flags & SGE_DBQ_TIMER))
return 0;
/* Find the SGE Doorbell Timer Value that's closest to the requested
* value.
*/
min_delta = INT_MAX;
min_timerix = 0;
for (timerix = 0; timerix < ARRAY_SIZE(s->dbqtimer_val); timerix++) {
delta = s->dbqtimer_val[timerix] - usecs;
if (delta < 0)
delta = -delta;
if (delta < min_delta) {
min_delta = delta;
min_timerix = timerix;
}
}
/* Return early if it's the same Timer Index we're already using.
* We use the same Timer Index for all of the TX Queues for an
* interface so it's only necessary to check the first one.
*/
txq = &s->ethtxq[pi->first_qset];
if (txq->dbqtimerix == min_timerix)
return 0;
for (qix = 0; qix < pi->nqsets; qix++, txq++) {
if (adap->flags & FULL_INIT_DONE) {
param =
(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DMAQ_EQ_TIMERIX) |
FW_PARAMS_PARAM_YZ_V(txq->q.cntxt_id));
val = min_timerix;
ret = t4_set_params(adap, adap->mbox, adap->pf, 0,
1, &param, &val);
if (ret)
return ret;
}
txq->dbqtimerix = min_timerix;
}
return 0;
}
/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX
* Queues and the Timer Value for the Ethernet TX Queues associated with a
* Network Device. Since changing the global Tick changes all of the
* available Timer Values, we need to do this first before selecting the
* resulting closest Timer Value. Moreover, since the Tick is global,
* changing it affects the Timer Values for all Network Devices on the
* adapter. So, before changing the Tick, we grab all of the current Timer
* Values for other Network Devices on this Adapter and then attempt to select
* new Timer Values which are close to the old values ...
*/
static int set_dbqtimer_tickval(struct net_device *dev,
int tick_usecs, int timer_usecs)
{
struct port_info *pi = netdev_priv(dev);
struct adapter *adap = pi->adapter;
int timer[MAX_NPORTS];
unsigned int port;
int ret;
/* Grab the other adapter Network Interface current timers and fill in
* the new one for this Network Interface.
*/
for_each_port(adap, port)
if (port == pi->port_id)
timer[port] = timer_usecs;
else
timer[port] = get_dbqtimer(adap->port[port]);
/* Change the global Tick first ... */
ret = set_dbqtimer_tick(dev, tick_usecs);
if (ret)
return ret;
/* ... and then set all of the Network Interface Timer Values ... */
for_each_port(adap, port) {
ret = set_dbqtimer(adap->port[port], timer[port]);
if (ret)
return ret;
}
return 0;
}
static int set_coalesce(struct net_device *dev,
struct ethtool_coalesce *coalesce)
{
int ret;
set_adaptive_rx_setting(dev, coalesce->use_adaptive_rx_coalesce);
ret = set_rx_intr_params(dev, coalesce->rx_coalesce_usecs,
coalesce->rx_max_coalesced_frames);
if (ret)
return ret;
return set_dbqtimer_tickval(dev,
coalesce->tx_coalesce_usecs_irq,
coalesce->tx_coalesce_usecs);
}
static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
......@@ -949,6 +1128,8 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
c->rx_max_coalesced_frames = (rq->intr_params & QINTR_CNT_EN_F) ?
adap->sge.counter_val[rq->pktcnt_idx] : 0;
c->use_adaptive_rx_coalesce = get_adaptive_rx_setting(dev);
c->tx_coalesce_usecs_irq = get_dbqtimer_tick(dev);
c->tx_coalesce_usecs = get_dbqtimer(dev);
return 0;
}
......
......@@ -4331,8 +4331,18 @@ static int adap_init0(struct adapter *adap)
/* Grab the SGE Doorbell Queue Timer values. If successful, that
* indicates that the Firmware and Hardware support this.
*/
ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(adap->sge.dbqtimer_val),
params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK));
ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
1, params, val);
if (!ret) {
adap->sge.dbqtimer_tick = val[0];
ret = t4_read_sge_dbqtimers(adap,
ARRAY_SIZE(adap->sge.dbqtimer_val),
adap->sge.dbqtimer_val);
}
if (!ret)
adap->flags |= SGE_DBQ_TIMER;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment