usb: musb: dsps: fix runtime pm for peripheral mode

Since the runtime PM support was added in musb, dsps relies on the timer
calling otg_timer() to activate the usb subsystem. However the driver
doesn't enable the timer for peripheral port, then the peripheral port is
unable to be enumerated by a host if the other usb port is disabled or in
peripheral mode too.

So let's start the timer for peripheral port too.

Fixes: ea2f35c0 ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/musb/musb_dsps.c

@@ -181,9 +181,11 @@ static void dsps_musb_enable(struct musb *musb)
 
 	musb_writel(reg_base, wrp->epintr_set, epmask);
 	musb_writel(reg_base, wrp->coreintr_set, coremask);
-	/* start polling for ID change in dual-role idle mode */
-	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
-			musb->port_mode == MUSB_OTG)
+	/*
+	 * start polling for runtime PM active and idle,
+	 * and for ID change in dual-role idle mode.
+	 */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
 		dsps_mod_timer(glue, -1);
 }
 
@@ -254,6 +256,10 @@ static int dsps_check_status(struct musb *musb, void *unused)
 				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 				MUSB_HST_MODE(musb);
 			}
+
+			if (musb->port_mode == MUSB_PERIPHERAL)
+				skip_session = 1;
+
 			if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
 				musb_writeb(mregs, MUSB_DEVCTL,
 					    MUSB_DEVCTL_SESSION);