Skip to content

L
linux
Commit 5460ab06 authored by Sébastien Szymanski's avatar Sébastien Szymanski Committed by Shawn Guo
Browse files
Options

ARM: dts: opos6ul/opos6uldev: rework device tree to support i.MX6ULL 

Rework the device trees of the OPOS6UL and OPOS6ULDev boards to support
the OPOS6UL SoM with an i.MX6ULL SoC.  The device trees are now as
following:

- imx6ul-imx6ull-opos6ul.dtsi
  common for both i.MX6UL and i.MX6ULL OPOS6UL SoM.
- imx6ul-opos6ul.dtsi
  for i.MX6UL OPOS6UL SoM. It includes imx6ul.dtsi and
  imx6ul-imx6ull-opos6ul.dtsi.
- imx6ull-opos6ul.dtsi
  for i.MX6ULL OPOS6UL SoM. It includes imx6ull.dtsi and
  imx6ul-imx6ull-opos6ul.dtsi.

- imx6ul-imx6ull-opos6uldev.dtsi
  OPOS6ULDev base device tree.
- imx6ul-opos6uldev.dts
  OPOS6ULDev board with an i.MX6UL OPOS6UL SoM. It includes
  imx6ul-opos6ul.dtsi and imx6ul-imx6ull-opos6uldevdtsi.
- imx6ull-opos6uldev.dts
  OPOS6ULDev board with an i.MX6ULL OPOS6UL SoM. It includes
  imx6ull-opos6ul.dtsi and imx6ul-imx6ull-opos6uldevdtsi.
Signed-off-by: default avatarSébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 54ecb8f7
Hide whitespace changes
Inline Side-by-side
Showing with 547 additions and 565 deletions
arch/arm/boot/dts/Makefile
View file @ 5460ab06
......@@ -583,6 +583,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
imx6ull-colibri-wifi-eval-v3.dtb \
imx6ull-opos6uldev.dtb \
imx6ull-phytec-segin-ff-rdk-nand.dtb \
imx6ull-phytec-segin-ff-rdk-emmc.dtb \
imx6ull-phytec-segin-lc-rdk-nand.dtb \
......
arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi 0 → 100644
View file @ 5460ab06
// SPDX-License-Identifier: GPL-2.0 OR MIT
//
// Copyright 2019 Armadeus Systems <support@armadeus.com>
/ {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0>; /* will be filled by U-Boot */
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
usdhc3_pwrseq: usdhc3-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-reset-duration = <1>;
phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
phy-handle = <&ethphy1>;
phy-supply = <&reg_3v3>;
status = "okay";
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&gpio4>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
status = "okay";
};
};
};
/* Bluetooth */
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8>;
uart-has-rtscts;
status = "okay";
};
/* eMMC */
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <8>;
no-1-8-v;
non-removable;
status = "okay";
};
/* WiFi */
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
no-1-8-v;
non-removable;
mmc-pwrseq = <&usdhc3_pwrseq>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio2>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "host-wake";
};
};
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
/* INT# */
MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
/* RST# */
MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
>;
};
pinctrl_uart8: uart8grp {
fsl,pins = <
MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
/* BT_REG_ON */
MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
/* WL_REG_ON */
MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
/* WL_IRQ */
MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi 0 → 100644
View file @ 5460ab06
// SPDX-License-Identifier: GPL-2.0 OR MIT
//
// Copyright 2019 Armadeus Systems <support@armadeus.com>
/ {
chosen {
stdout-path = &uart1;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 191000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_5v>;
status = "okay";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
user-button {
label = "User button";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
user-led {
label = "User";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
onewire {
compatible = "w1-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_w1>;
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
};
panel: panel {
compatible = "armadeus,st0700-adapt";
power-supply = <&reg_3v3>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&lcdif_out>;
};
};
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usbotg1_vbus: regulator-usbotg1vbus {
compatible = "regulator-fixed";
regulator-name = "usbotg1vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_vbus>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg2_vbus: regulator-usbotg2vbus {
compatible = "regulator-fixed";
regulator-name = "usbotg2vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg2_vbus>;
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adc1 {
vref-supply = <&reg_3v3>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_5v>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_5v>;
status = "okay";
};
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
status = "okay";
spidev0: spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <5000000>;
};
spidev1: spi@1 {
compatible = "spidev";
reg = <1>;
spi-max-frequency = <5000000>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock-frequency = <400000>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <400000>;
status = "okay";
};
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif>;
status = "okay";
port {
lcdif_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&snvs_pwrkey {
status = "disabled";
};
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xffff>;
pre-charge-time = <0xffff>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_id>;
vbus-supply = <&reg_usbotg1_vbus>;
dr_mode = "otg";
disable-over-current;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usbotg2_vbus>;
dr_mode = "host";
disable-over-current;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpios>;
pinctrl_ecspi4: ecspi4grp {
fsl,pins = <
MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
>;
};
pinctrl_gpios: gpiosgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
>;
};
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
>;
};
pinctrl_lcdif: lcdifgrp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
>;
};
pinctrl_led: ledgrp {
fsl,pins = <
MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
>;
};
pinctrl_tsc: tscgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
>;
};
pinctrl_usbotg1_id: usbotg1idgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
>;
};
pinctrl_usbotg1_vbus: usbotg1vbusgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6ul-opos6ul.dtsi
View file @ 5460ab06
/*
* Copyright 2017 Armadeus Systems <support@armadeus.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
// SPDX-License-Identifier: GPL-2.0 OR MIT
//
// Copyright 2017 Armadeus Systems <support@armadeus.com>
#include "imx6ul.dtsi"
/ {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0>; /* will be filled by U-Boot */
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
usdhc3_pwrseq: usdhc3-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-reset-duration = <1>;
phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
phy-handle = <&ethphy1>;
phy-supply = <&reg_3v3>;
status = "okay";
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&gpio4>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
status = "okay";
};
};
};
/* Bluetooth */
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8>;
uart-has-rtscts;
status = "okay";
};
/* eMMC */
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <8>;
no-1-8-v;
non-removable;
status = "okay";
};
/* WiFi */
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
no-1-8-v;
non-removable;
mmc-pwrseq = <&usdhc3_pwrseq>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio2>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "host-wake";
};
};
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
/* INT# */
MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
/* RST# */
MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
>;
};
pinctrl_uart8: uart8grp {
fsl,pins = <
MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
/* BT_REG_ON */
MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
/* WL_REG_ON */
MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
/* WL_IRQ */
MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
>;
};
};
#include "imx6ul-imx6ull-opos6ul.dtsi"
arch/arm/boot/dts/imx6ul-opos6uldev.dts
View file @ 5460ab06
/*
* Copyright 2017 Armadeus Systems <support@armadeus.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
// SPDX-License-Identifier: GPL-2.0 OR MIT
//
// Copyright 2017 Armadeus Systems <support@armadeus.com>
/dts-v1/;
#include "imx6ul-opos6ul.dtsi"
#include "imx6ul-imx6ull-opos6uldev.dtsi"
/ {
model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
chosen {
stdout-path = &uart1;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 191000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_5v>;
status = "okay";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
user-button {
label = "User button";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
user-led {
label = "User";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
onewire {
compatible = "w1-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_w1>;
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
};
panel: panel {
compatible = "armadeus,st0700-adapt";
power-supply = <&reg_3v3>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&lcdif_out>;
};
};
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usbotg1_vbus: regulator-usbotg1vbus {
compatible = "regulator-fixed";
regulator-name = "usbotg1vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_vbus>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg2_vbus: regulator-usbotg2vbus {
compatible = "regulator-fixed";
regulator-name = "usbotg2vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg2_vbus>;
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adc1 {
vref-supply = <&reg_3v3>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_5v>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_5v>;
status = "okay";
};
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
status = "okay";
spidev0: spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <5000000>;
};
spidev1: spi@1 {
compatible = "spidev";
reg = <1>;
spi-max-frequency = <5000000>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock_frequency = <400000>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock_frequency = <400000>;
status = "okay";
};
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif>;
status = "okay";
port {
lcdif_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&snvs_pwrkey {
status = "disabled";
};
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xffff>;
pre-charge-time = <0xffff>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_id>;
vbus-supply = <&reg_usbotg1_vbus>;
dr_mode = "otg";
disable-over-current;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usbotg2_vbus>;
dr_mode = "host";
disable-over-current;
status = "okay";
model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board";
compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpios>;
pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>;
pinctrl_ecspi4: ecspi4grp {
pinctrl_tamper_gpios: tampergpiosgrp {
fsl,pins = <
MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
>;
};
pinctrl_gpios: gpiosgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
......@@ -299,100 +27,6 @@ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0
>;
};
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
>;
};
pinctrl_lcdif: lcdifgrp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
>;
};
pinctrl_led: ledgrp {
fsl,pins = <
MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
>;
};
pinctrl_tsc: tscgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
>;
};
pinctrl_usbotg1_id: usbotg1idgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
>;
};
pinctrl_usbotg1_vbus: usbotg1vbusgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
>;
};
pinctrl_usbotg2_vbus: usbotg2vbusgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
......
arch/arm/boot/dts/imx6ull-opos6ul.dtsi 0 → 100644
View file @ 5460ab06
// SPDX-License-Identifier: GPL-2.0 OR MIT
//
// Copyright 2019 Armadeus Systems <support@armadeus.com>
#include "imx6ull.dtsi"
#include "imx6ul-imx6ull-opos6ul.dtsi"
arch/arm/boot/dts/imx6ull-opos6uldev.dts 0 → 100644
View file @ 5460ab06
// SPDX-License-Identifier: GPL-2.0 OR MIT
//
// Copyright 2019 Armadeus Systems <support@armadeus.com>
/dts-v1/;
#include "imx6ull-opos6ul.dtsi"
#include "imx6ul-imx6ull-opos6uldev.dtsi"
/ {
model = "Armadeus Systems OPOS6UL SoM (i.MX6ULL) on OPOS6ULDev board";
compatible = "armadeus,imx6ull-opos6uldev", "armadeus,imx6ull-opos6ul", "fsl,imx6ull";
};
&iomuxc_snvs {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tamper_gpios>;
pinctrl_tamper_gpios: tampergpiosgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0
MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0
MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0
MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0
>;
};
pinctrl_usbotg2_vbus: usbotg2vbusgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
>;
};
pinctrl_w1: w1grp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0
>;
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7