ARM: w90x900: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the w90x900 include directories
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

arch/arm/mach-w90x900/dev.c

@@ -34,11 +34,11 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-serial.h>
-#include <mach/nuc900_spi.h>
+#include <linux/platform_data/spi-nuc900.h>
 #include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
 #include <mach/regs-ldm.h>
-#include <mach/w90p910_keypad.h>
+#include <linux/platform_data/keypad-w90p910.h>
 
 #include "cpu.h"
 

arch/arm/mach-w90x900/mach-nuc950evb.c

@@ -20,7 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
 
 #include "nuc950.h"
 

drivers/i2c/busses/i2c-nuc900.c

@@ -29,7 +29,7 @@
 #include <linux/io.h>
 
 #include <mach/mfp.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-nuc900.h>
 
 /* nuc900 i2c registers offset */
 

drivers/input/keyboard/w90p910_keypad.c

@@ -21,7 +21,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
-#include <mach/w90p910_keypad.h>
+#include <linux/platform_data/keypad-w90p910.h>
 
 /* Keypad Interface Control Registers */
 #define KPI_CONF		0x00

drivers/spi/spi-nuc900.c

@@ -26,7 +26,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 
-#include <mach/nuc900_spi.h>
+#include <linux/platform_data/spi-nuc900.h>
 
 /* usi registers offset */
 #define USI_CNT		0x00

drivers/video/nuc900fb.c

@@ -38,7 +38,7 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-ldm.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
 
 #include "nuc900fb.h"
 

drivers/video/nuc900fb.h

@@ -16,7 +16,7 @@
 #define __NUC900FB_H
 
 #include <mach/map.h>
-#include <mach/fb.h>
+#include <linux/platform_data/video-nuc900fb.h>
 
 enum nuc900_lcddrv_type {
 	LCDDRV_NUC910,