media: mem2mem: Make .job_abort optional

Implementing job_abort() does not make sense on some drivers.
This is not a problem, as the abort is not required to
wait for the job to finish. Quite the opposite, drivers
are encouraged not to wait.

Demote v4l2_m2m_ops.job_abort from required to optional, and
clean all drivers with dummy implementations.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c

@@ -861,14 +861,9 @@ static int mtk_jpeg_job_ready(void *priv)
 	return (ctx->state == MTK_JPEG_RUNNING) ? 1 : 0;
 }
 
-static void mtk_jpeg_job_abort(void *priv)
-{
-}
-
 static const struct v4l2_m2m_ops mtk_jpeg_m2m_ops = {
 	.device_run = mtk_jpeg_device_run,
 	.job_ready  = mtk_jpeg_job_ready,
-	.job_abort  = mtk_jpeg_job_abort,
 };
 
 static int mtk_jpeg_queue_init(void *priv, struct vb2_queue *src_vq,

drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c

@@ -441,10 +441,6 @@ static void mtk_mdp_m2m_stop_streaming(struct vb2_queue *q)
 	pm_runtime_put(&ctx->mdp_dev->pdev->dev);
 }
 
-static void mtk_mdp_m2m_job_abort(void *priv)
-{
-}
-
 /* The color format (num_planes) must be already configured. */
 static void mtk_mdp_prepare_addr(struct mtk_mdp_ctx *ctx,
 				 struct vb2_buffer *vb,
@@ -1215,7 +1211,6 @@ static const struct v4l2_file_operations mtk_mdp_m2m_fops = {
 
 static const struct v4l2_m2m_ops mtk_mdp_m2m_ops = {
 	.device_run	= mtk_mdp_m2m_device_run,
-	.job_abort	= mtk_mdp_m2m_job_abort,
 };
 
 int mtk_mdp_register_m2m_device(struct mtk_mdp_dev *mdp)

drivers/media/platform/rcar_jpu.c

@@ -1492,13 +1492,8 @@ static void jpu_device_run(void *priv)
 	spin_unlock_irqrestore(&ctx->jpu->lock, flags);
 }
 
-static void jpu_job_abort(void *priv)
-{
-}
-
 static const struct v4l2_m2m_ops jpu_m2m_ops = {
 	.device_run	= jpu_device_run,
-	.job_abort	= jpu_job_abort,
 };
 
 /*

drivers/media/platform/rockchip/rga/rga.c

@@ -39,11 +39,6 @@
 static int debug;
 module_param(debug, int, 0644);
 
-static void job_abort(void *prv)
-{
-	/* Can't do anything rational here */
-}
-
 static void device_run(void *prv)
 {
 	struct rga_ctx *ctx = prv;
@@ -104,7 +99,6 @@ static irqreturn_t rga_isr(int irq, void *prv)
 
 static struct v4l2_m2m_ops rga_m2m_ops = {
 	.device_run = device_run,
-	.job_abort = job_abort,
 };
 
 static int

drivers/media/platform/s5p-g2d/g2d.c

@@ -483,10 +483,6 @@ static int vidioc_s_crop(struct file *file, void *prv, const struct v4l2_crop *c
 	return 0;
 }
 
-static void job_abort(void *prv)
-{
-}
-
 static void device_run(void *prv)
 {
 	struct g2d_ctx *ctx = prv;
@@ -605,7 +601,6 @@ static const struct video_device g2d_videodev = {
 
 static const struct v4l2_m2m_ops g2d_m2m_ops = {
 	.device_run	= device_run,
-	.job_abort	= job_abort,
 };
 
 static const struct of_device_id exynos_g2d_match[];

drivers/media/platform/s5p-jpeg/jpeg-core.c

@@ -2467,26 +2467,19 @@ static int s5p_jpeg_job_ready(void *priv)
 	return 1;
 }
 
-static void s5p_jpeg_job_abort(void *priv)
-{
-}
-
 static struct v4l2_m2m_ops s5p_jpeg_m2m_ops = {
 	.device_run	= s5p_jpeg_device_run,
 	.job_ready	= s5p_jpeg_job_ready,
-	.job_abort	= s5p_jpeg_job_abort,
 };
 
 static struct v4l2_m2m_ops exynos3250_jpeg_m2m_ops = {
 	.device_run	= exynos3250_jpeg_device_run,
 	.job_ready	= s5p_jpeg_job_ready,
-	.job_abort	= s5p_jpeg_job_abort,
 };
 
 static struct v4l2_m2m_ops exynos4_jpeg_m2m_ops = {
 	.device_run	= exynos4_jpeg_device_run,
 	.job_ready	= s5p_jpeg_job_ready,
-	.job_abort	= s5p_jpeg_job_abort,
 };
 
 /*

drivers/media/v4l2-core/v4l2-mem2mem.c

@@ -322,6 +322,7 @@ static void v4l2_m2m_cancel_job(struct v4l2_m2m_ctx *m2m_ctx)
 	m2m_ctx->job_flags |= TRANS_ABORT;
 	if (m2m_ctx->job_flags & TRANS_RUNNING) {
 		spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags);
+		if (m2m_dev->m2m_ops->job_abort)
 			m2m_dev->m2m_ops->job_abort(m2m_ctx->priv);
 		dprintk("m2m_ctx %p running, will wait to complete", m2m_ctx);
 		wait_event(m2m_ctx->finished,
@@ -788,8 +789,7 @@ struct v4l2_m2m_dev *v4l2_m2m_init(const struct v4l2_m2m_ops *m2m_ops)
 {
 	struct v4l2_m2m_dev *m2m_dev;
 
-	if (!m2m_ops || WARN_ON(!m2m_ops->device_run) ||
-			WARN_ON(!m2m_ops->job_abort))
+	if (!m2m_ops || WARN_ON(!m2m_ops->device_run))
 		return ERR_PTR(-EINVAL);
 
 	m2m_dev = kzalloc(sizeof *m2m_dev, GFP_KERNEL);

include/media/v4l2-mem2mem.h

@@ -32,7 +32,7 @@
  *		assumed that one source and one destination buffer are all
  *		that is required for the driver to perform one full transaction.
  *		This method may not sleep.
- * @job_abort:	required. Informs the driver that it has to abort the currently
+ * @job_abort:	optional. Informs the driver that it has to abort the currently
  *		running transaction as soon as possible (i.e. as soon as it can
  *		stop the device safely; e.g. in the next interrupt handler),
  *		even if the transaction would not have been finished by then.