Skip to content

L
linux
Commit 56490b62 authored by David Ahern's avatar David Ahern Committed by David S. Miller
Browse files
Options

selftests: Add debugging options to pmtu.sh 

pmtu.sh script runs a number of tests and dumps a summary of pass/fail.
If a test fails, it is near impossible to debug why. For example:

    TEST: ipv6: PMTU exceptions                       [FAIL]

There are a lot of commands run behind the scenes for this test. Which
one is failing?

Add a VERBOSE option to show commands that are run and any output from
those commands. Add a PAUSE_ON_FAIL option to halt the script if a test
fails allowing users to poke around with the setup in the failed state.

In the process, rename tracing to TRACING and move declaration to top
with the new variables.
Signed-off-by: default avatarDavid Ahern <dsahern@gmail.com>
Reviewed-by: default avatarStefano Brivio <sbrivio@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent bb23581b
Show whitespace changes
Inline Side-by-side
Showing with 124 additions and 89 deletions
tools/testing/selftests/net/pmtu.sh
View file @ 56490b62
......@@ -116,6 +116,10 @@
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
PAUSE_ON_FAIL=no
VERBOSE=0
TRACING=0
# Some systems don't have a ping6 binary anymore
which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
......@@ -222,6 +226,23 @@ err_flush() {
err_buf=
}
run_cmd() {
cmd="$*"
if [ "$VERBOSE" = "1" ]; then
printf " COMMAND: $cmd\n"
fi
out="$($cmd 2>&1)"
rc=$?
if [ "$VERBOSE" = "1" -a -n "$out" ]; then
echo " $out"
echo
fi
return $rc
}
# Find the auto-generated name for this namespace
nsname() {
eval echo \$NS_$1
......@@ -258,22 +279,22 @@ setup_fou_or_gue() {
fi
fi
${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2
${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2
run_cmd ${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2
run_cmd ${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2
${ns_b} ip fou add port 5556 ipproto ${ipproto}
${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555
run_cmd ${ns_b} ip fou add port 5556 ipproto ${ipproto}
run_cmd ${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555
if [ "${inner}" = "4" ]; then
${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a
${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b
run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a
run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b
else
${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a
${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b
run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a
run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b
fi
${ns_a} ip link set ${encap}_a up
${ns_b} ip link set ${encap}_b up
run_cmd ${ns_a} ip link set ${encap}_a up
run_cmd ${ns_b} ip link set ${encap}_b up
}
setup_fou44() {
......@@ -319,17 +340,17 @@ setup_namespaces() {
}
setup_veth() {
${ns_a} ip link add veth_a type veth peer name veth_b || return 1
${ns_a} ip link set veth_b netns ${NS_B}
run_cmd ${ns_a} ip link add veth_a type veth peer name veth_b || return 1
run_cmd ${ns_a} ip link set veth_b netns ${NS_B}
${ns_a} ip addr add ${veth4_a_addr}/${veth4_mask} dev veth_a
${ns_b} ip addr add ${veth4_b_addr}/${veth4_mask} dev veth_b
run_cmd ${ns_a} ip addr add ${veth4_a_addr}/${veth4_mask} dev veth_a
run_cmd ${ns_b} ip addr add ${veth4_b_addr}/${veth4_mask} dev veth_b
${ns_a} ip addr add ${veth6_a_addr}/${veth6_mask} dev veth_a
${ns_b} ip addr add ${veth6_b_addr}/${veth6_mask} dev veth_b
run_cmd ${ns_a} ip addr add ${veth6_a_addr}/${veth6_mask} dev veth_a
run_cmd ${ns_b} ip addr add ${veth6_b_addr}/${veth6_mask} dev veth_b
${ns_a} ip link set veth_a up
${ns_b} ip link set veth_b up
run_cmd ${ns_a} ip link set veth_a up
run_cmd ${ns_b} ip link set veth_b up
}
setup_vti() {
......@@ -342,14 +363,14 @@ setup_vti() {
[ ${proto} -eq 6 ] && vti_type="vti6" || vti_type="vti"
${ns_a} ip link add vti${proto}_a type ${vti_type} local ${veth_a_addr} remote ${veth_b_addr} key 10 || return 1
${ns_b} ip link add vti${proto}_b type ${vti_type} local ${veth_b_addr} remote ${veth_a_addr} key 10
run_cmd ${ns_a} ip link add vti${proto}_a type ${vti_type} local ${veth_a_addr} remote ${veth_b_addr} key 10 || return 1
run_cmd ${ns_b} ip link add vti${proto}_b type ${vti_type} local ${veth_b_addr} remote ${veth_a_addr} key 10
${ns_a} ip addr add ${vti_a_addr}/${vti_mask} dev vti${proto}_a
${ns_b} ip addr add ${vti_b_addr}/${vti_mask} dev vti${proto}_b
run_cmd ${ns_a} ip addr add ${vti_a_addr}/${vti_mask} dev vti${proto}_a
run_cmd ${ns_b} ip addr add ${vti_b_addr}/${vti_mask} dev vti${proto}_b
${ns_a} ip link set vti${proto}_a up
${ns_b} ip link set vti${proto}_b up
run_cmd ${ns_a} ip link set vti${proto}_a up
run_cmd ${ns_b} ip link set vti${proto}_b up
}
setup_vti4() {
......@@ -375,17 +396,17 @@ setup_vxlan_or_geneve() {
opts_b=""
fi
${ns_a} ip link add ${type}_a type ${type} id 1 ${opts_a} remote ${b_addr} ${opts} || return 1
${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts}
run_cmd ${ns_a} ip link add ${type}_a type ${type} id 1 ${opts_a} remote ${b_addr} ${opts} || return 1
run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts}
${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${type}_a
${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b
run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${type}_a
run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b
${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${type}_a
${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${type}_a
run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
${ns_a} ip link set ${type}_a up
${ns_b} ip link set ${type}_b up
run_cmd ${ns_a} ip link set ${type}_a up
run_cmd ${ns_b} ip link set ${type}_b up
}
setup_geneve4() {
......@@ -409,15 +430,15 @@ setup_xfrm() {
veth_a_addr="${2}"
veth_b_addr="${3}"
${ns_a} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel || return 1
${ns_a} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
${ns_a} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel
${ns_a} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel
run_cmd "${ns_a} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel" || return 1
run_cmd "${ns_a} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel"
run_cmd "${ns_a} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel"
run_cmd "${ns_a} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel"
${ns_b} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
${ns_b} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
${ns_b} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel
${ns_b} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel
run_cmd "${ns_b} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel"
run_cmd "${ns_b} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel"
run_cmd "${ns_b} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel"
run_cmd "${ns_b} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel"
}
setup_xfrm4() {
......@@ -481,7 +502,7 @@ setup() {
}
trace() {
[ $tracing -eq 0 ] && return
[ $TRACING -eq 0 ] && return
for arg do
[ "${ns_cmd}" = "" ] && ns_cmd="${arg}" && continue
......@@ -597,8 +618,8 @@ test_pmtu_ipvX() {
mtu "${ns_b}" veth_B-R2 1500
# Create route exceptions
${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1} > /dev/null
${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2} > /dev/null
run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1}
run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2}
# Check that exceptions have been created with the correct PMTU
pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
......@@ -630,7 +651,7 @@ test_pmtu_ipvX() {
# Decrease remote MTU on path via R2, get new exception
mtu "${ns_r2}" veth_R2-B 400
mtu "${ns_b}" veth_B-R2 400
${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null
run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2}
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1
......@@ -647,7 +668,7 @@ test_pmtu_ipvX() {
check_pmtu_value "1500" "${pmtu_2}" "increasing local MTU" || return 1
# Get new exception
${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null
run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2}
pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1
}
......@@ -696,7 +717,7 @@ test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() {
mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000))
mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst}
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
......@@ -776,7 +797,7 @@ test_pmtu_ipvX_over_fouY_or_gueY() {
mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000))
mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000))
${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst}
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
......@@ -834,13 +855,13 @@ test_pmtu_vti4_exception() {
# Send DF packet without exceeding link layer MTU, check that no
# exception is created
${ns_a} ping -q -M want -i 0.1 -w 1 -s ${ping_payload} ${tunnel4_b_addr} > /dev/null
run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s ${ping_payload} ${tunnel4_b_addr}
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
check_pmtu_value "" "${pmtu}" "sending packet smaller than PMTU (IP payload length ${esp_payload_rfc4106})" || return 1
# Now exceed link layer MTU by one byte, check that exception is created
# with the right PMTU value
${ns_a} ping -q -M want -i 0.1 -w 1 -s $((ping_payload + 1)) ${tunnel4_b_addr} > /dev/null
run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((ping_payload + 1)) ${tunnel4_b_addr}
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
check_pmtu_value "${esp_payload_rfc4106}" "${pmtu}" "exceeding PMTU (IP payload length $((esp_payload_rfc4106 + 1)))"
}
......@@ -856,7 +877,7 @@ test_pmtu_vti6_exception() {
mtu "${ns_b}" veth_b 4000
mtu "${ns_a}" vti6_a 5000
mtu "${ns_b}" vti6_b 5000
${ns_a} ${ping6} -q -i 0.1 -w 1 -s 60000 ${tunnel6_b_addr} > /dev/null
run_cmd ${ns_a} ${ping6} -q -i 0.1 -w 1 -s 60000 ${tunnel6_b_addr}
# Check that exception was created
pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
......@@ -902,9 +923,9 @@ test_pmtu_vti6_default_mtu() {
test_pmtu_vti4_link_add_mtu() {
setup namespaces || return 2
${ns_a} ip link add vti4_a type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
run_cmd ${ns_a} ip link add vti4_a type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
[ $? -ne 0 ] && err " vti not supported" && return 2
${ns_a} ip link del vti4_a
run_cmd ${ns_a} ip link del vti4_a
fail=0
......@@ -912,7 +933,7 @@ test_pmtu_vti4_link_add_mtu() {
max=$((65535 - 20))
# Check invalid values first
for v in $((min - 1)) $((max + 1)); do
${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 2>/dev/null
run_cmd ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
# This can fail, or MTU can be adjusted to a proper value
[ $? -ne 0 ] && continue
mtu="$(link_get_mtu "${ns_a}" vti4_a)"
......@@ -920,14 +941,14 @@ test_pmtu_vti4_link_add_mtu() {
err " vti tunnel created with invalid MTU ${mtu}"
fail=1
fi
${ns_a} ip link del vti4_a
run_cmd ${ns_a} ip link del vti4_a
done
# Now check valid values
for v in ${min} 1300 ${max}; do
${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
run_cmd ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
mtu="$(link_get_mtu "${ns_a}" vti4_a)"
${ns_a} ip link del vti4_a
run_cmd ${ns_a} ip link del vti4_a
if [ "${mtu}" != "${v}" ]; then
err " vti MTU ${mtu} doesn't match configured value ${v}"
fail=1
......@@ -940,9 +961,9 @@ test_pmtu_vti4_link_add_mtu() {
test_pmtu_vti6_link_add_mtu() {
setup namespaces || return 2
${ns_a} ip link add vti6_a type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
run_cmd ${ns_a} ip link add vti6_a type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
[ $? -ne 0 ] && err " vti6 not supported" && return 2
${ns_a} ip link del vti6_a
run_cmd ${ns_a} ip link del vti6_a
fail=0
......@@ -950,7 +971,7 @@ test_pmtu_vti6_link_add_mtu() {
max=$((65535 - 40))
# Check invalid values first
for v in $((min - 1)) $((max + 1)); do
${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 2>/dev/null
run_cmd ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
# This can fail, or MTU can be adjusted to a proper value
[ $? -ne 0 ] && continue
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
......@@ -958,14 +979,14 @@ test_pmtu_vti6_link_add_mtu() {
err " vti6 tunnel created with invalid MTU ${v}"
fail=1
fi
${ns_a} ip link del vti6_a
run_cmd ${ns_a} ip link del vti6_a
done
# Now check valid values
for v in 68 1280 1300 $((65535 - 40)); do
${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
run_cmd ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
${ns_a} ip link del vti6_a
run_cmd ${ns_a} ip link del vti6_a
if [ "${mtu}" != "${v}" ]; then
err " vti6 MTU ${mtu} doesn't match configured value ${v}"
fail=1
......@@ -978,19 +999,19 @@ test_pmtu_vti6_link_add_mtu() {
test_pmtu_vti6_link_change_mtu() {
setup namespaces || return 2
${ns_a} ip link add dummy0 mtu 1500 type dummy
run_cmd ${ns_a} ip link add dummy0 mtu 1500 type dummy
[ $? -ne 0 ] && err " dummy not supported" && return 2
${ns_a} ip link add dummy1 mtu 3000 type dummy
${ns_a} ip link set dummy0 up
${ns_a} ip link set dummy1 up
run_cmd ${ns_a} ip link add dummy1 mtu 3000 type dummy
run_cmd ${ns_a} ip link set dummy0 up
run_cmd ${ns_a} ip link set dummy1 up
${ns_a} ip addr add ${dummy6_0_addr}/${dummy6_mask} dev dummy0
${ns_a} ip addr add ${dummy6_1_addr}/${dummy6_mask} dev dummy1
run_cmd ${ns_a} ip addr add ${dummy6_0_addr}/${dummy6_mask} dev dummy0
run_cmd ${ns_a} ip addr add ${dummy6_1_addr}/${dummy6_mask} dev dummy1
fail=0
# Create vti6 interface bound to device, passing MTU, check it
${ns_a} ip link add vti6_a mtu 1300 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr}
run_cmd ${ns_a} ip link add vti6_a mtu 1300 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr}
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
if [ ${mtu} -ne 1300 ]; then
err " vti6 MTU ${mtu} doesn't match configured value 1300"
......@@ -999,7 +1020,7 @@ test_pmtu_vti6_link_change_mtu() {
# Move to another device with different MTU, without passing MTU, check
# MTU is adjusted
${ns_a} ip link set vti6_a type vti6 remote ${dummy6_1_addr} local ${dummy6_1_addr}
run_cmd ${ns_a} ip link set vti6_a type vti6 remote ${dummy6_1_addr} local ${dummy6_1_addr}
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
if [ ${mtu} -ne $((3000 - 40)) ]; then
err " vti MTU ${mtu} is not dummy MTU 3000 minus IPv6 header length"
......@@ -1007,7 +1028,7 @@ test_pmtu_vti6_link_change_mtu() {
fi
# Move it back, passing MTU, check MTU is not overridden
${ns_a} ip link set vti6_a mtu 1280 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr}
run_cmd ${ns_a} ip link set vti6_a mtu 1280 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr}
mtu="$(link_get_mtu "${ns_a}" vti6_a)"
if [ ${mtu} -ne 1280 ]; then
err " vti6 MTU ${mtu} doesn't match configured value 1280"
......@@ -1052,7 +1073,7 @@ test_cleanup_vxlanX_exception() {
# Fill exception cache for multiple CPUs (2)
# we can always use inner IPv4 for that
for cpu in ${cpu_list}; do
taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr} > /dev/null
run_cmd taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr}
done
${ns_a} ip link del dev veth_A-R1 &
......@@ -1084,29 +1105,33 @@ usage() {
exit 1
}
################################################################################
#
exitcode=0
desc=0
IFS="
"
tracing=0
for arg do
if [ "${arg}" != "${arg#--*}" ]; then
opt="${arg#--}"
if [ "${opt}" = "trace" ]; then
if which tcpdump > /dev/null 2>&1; then
tracing=1
while getopts :ptv o
do
case $o in
p) PAUSE_ON_FAIL=yes;;
v) VERBOSE=1;;
t) if which tcpdump > /dev/null 2>&1; then
TRACING=1
else
echo "=== tcpdump not available, tracing disabled"
fi
else
usage
fi
else
# Check first that all requested tests are available before
# running any
;;
*) usage;;
esac
done
shift $(($OPTIND-1))
IFS="
"
for arg do
# Check first that all requested tests are available before running any
command -v > /dev/null "test_${arg}" || { echo "=== Test ${arg} not found"; usage; }
fi
done
trap cleanup EXIT
......@@ -1124,6 +1149,11 @@ for t in ${tests}; do
(
unset IFS
if [ "$VERBOSE" = "1" ]; then
printf "\n##########################################################################\n\n"
fi
eval test_${name}
ret=$?
cleanup
......@@ -1132,6 +1162,11 @@ for t in ${tests}; do
printf "TEST: %-60s [ OK ]\n" "${t}"
elif [ $ret -eq 1 ]; then
printf "TEST: %-60s [FAIL]\n" "${t}"
if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
echo
echo "Pausing. Hit enter to continue"
read a
fi
err_flush
exit 1
elif [ $ret -eq 2 ]; then
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7