OMAP: add TI OMAP1 internal LCD controller

- Add Texas Instruments OMAP1 processor series (OMAP1510/1610/1710..)
  internal LCD controller interface.
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/omap/Makefile

@@ -6,5 +6,7 @@ obj-$(CONFIG_FB_OMAP) += omapfb.o
 
 objs-yy := omapfb_main.o
 
+objs-y$(CONFIG_ARCH_OMAP1) += lcdc.o
+
 omapfb-objs := $(objs-yy)
 

drivers/video/omap/lcdc.c

+/*
+ * OMAP1 internal LCD controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/omapfb.h>
+
+#include <asm/mach-types.h>
+
+#define MODULE_NAME			"lcdc"
+
+#define OMAP_LCDC_BASE			0xfffec000
+#define OMAP_LCDC_SIZE			256
+#define OMAP_LCDC_IRQ			INT_LCD_CTRL
+
+#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
+#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
+#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
+#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
+#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
+#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
+#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
+#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
+
+#define OMAP_LCDC_STAT_DONE		(1 << 0)
+#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
+#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
+#define OMAP_LCDC_STAT_ABC		(1 << 3)
+#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
+#define OMAP_LCDC_STAT_FUF		(1 << 5)
+#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
+
+#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
+#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
+#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
+
+#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
+#define OMAP_LCDC_IRQ_DONE		(1 << 3)
+#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
+#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
+#define OMAP_LCDC_IRQ_LINE		(1 << 6)
+#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
+
+#define MAX_PALETTE_SIZE		PAGE_SIZE
+
+enum lcdc_load_mode {
+	OMAP_LCDC_LOAD_PALETTE,
+	OMAP_LCDC_LOAD_FRAME,
+	OMAP_LCDC_LOAD_PALETTE_AND_FRAME
+};
+
+static struct omap_lcd_controller {
+	enum omapfb_update_mode	update_mode;
+	int			ext_mode;
+
+	unsigned long		frame_offset;
+	int			screen_width;
+	int			xres;
+	int			yres;
+
+	enum omapfb_color_format	color_mode;
+	int			bpp;
+	void			*palette_virt;
+	dma_addr_t		palette_phys;
+	int			palette_code;
+	int			palette_size;
+
+	unsigned int		irq_mask;
+	struct completion	last_frame_complete;
+	struct completion	palette_load_complete;
+	struct clk		*lcd_ck;
+	struct omapfb_device	*fbdev;
+
+	void			(*dma_callback)(void *data);
+	void			*dma_callback_data;
+
+	int			fbmem_allocated;
+	dma_addr_t		vram_phys;
+	void			*vram_virt;
+	unsigned long		vram_size;
+} lcdc;
+
+static void inline enable_irqs(int mask)
+{
+	lcdc.irq_mask |= mask;
+}
+
+static void inline disable_irqs(int mask)
+{
+	lcdc.irq_mask &= ~mask;
+}
+
+static void set_load_mode(enum lcdc_load_mode mode)
+{
+	u32 l;
+
+	l = omap_readl(OMAP_LCDC_CONTROL);
+	l &= ~(3 << 20);
+	switch (mode) {
+	case OMAP_LCDC_LOAD_PALETTE:
+		l |= 1 << 20;
+		break;
+	case OMAP_LCDC_LOAD_FRAME:
+		l |= 2 << 20;
+		break;
+	case OMAP_LCDC_LOAD_PALETTE_AND_FRAME:
+		break;
+	default:
+		BUG();
+	}
+	omap_writel(l, OMAP_LCDC_CONTROL);
+}
+
+static void enable_controller(void)
+{
+	u32 l;
+
+	l = omap_readl(OMAP_LCDC_CONTROL);
+	l |= OMAP_LCDC_CTRL_LCD_EN;
+	l &= ~OMAP_LCDC_IRQ_MASK;
+	l |= lcdc.irq_mask | OMAP_LCDC_IRQ_DONE;	/* enabled IRQs */
+	omap_writel(l, OMAP_LCDC_CONTROL);
+}
+
+static void disable_controller_async(void)
+{
+	u32 l;
+	u32 mask;
+
+	l = omap_readl(OMAP_LCDC_CONTROL);
+	mask = OMAP_LCDC_CTRL_LCD_EN | OMAP_LCDC_IRQ_MASK;
+	/*
+	 * Preserve the DONE mask, since we still want to get the
+	 * final DONE irq. It will be disabled in the IRQ handler.
+	 */
+	mask &= ~OMAP_LCDC_IRQ_DONE;
+	l &= ~mask;
+	omap_writel(l, OMAP_LCDC_CONTROL);
+}
+
+static void disable_controller(void)
+{
+	init_completion(&lcdc.last_frame_complete);
+	disable_controller_async();
+	if (!wait_for_completion_timeout(&lcdc.last_frame_complete,
+				msecs_to_jiffies(500)))
+		dev_err(lcdc.fbdev->dev, "timeout waiting for FRAME DONE\n");
+}
+
+static void reset_controller(u32 status)
+{
+	static unsigned long reset_count;
+	static unsigned long last_jiffies;
+
+	disable_controller_async();
+	reset_count++;
+	if (reset_count == 1 || time_after(jiffies, last_jiffies + HZ)) {
+		dev_err(lcdc.fbdev->dev,
+			  "resetting (status %#010x,reset count %lu)\n",
+			  status, reset_count);
+		last_jiffies = jiffies;
+	}
+	if (reset_count < 100) {
+		enable_controller();
+	} else {
+		reset_count = 0;
+		dev_err(lcdc.fbdev->dev,
+			"too many reset attempts, giving up.\n");
+	}
+}
+
+/*
+ * Configure the LCD DMA according to the current mode specified by parameters
+ * in lcdc.fbdev and fbdev->var.
+ */
+static void setup_lcd_dma(void)
+{
+	static const int dma_elem_type[] = {
+		0,
+		OMAP_DMA_DATA_TYPE_S8,
+		OMAP_DMA_DATA_TYPE_S16,
+		0,
+		OMAP_DMA_DATA_TYPE_S32,
+	};
+	struct omapfb_plane_struct *plane = lcdc.fbdev->fb_info[0]->par;
+	struct fb_var_screeninfo *var = &lcdc.fbdev->fb_info[0]->var;
+	unsigned long	src;
+	int		esize, xelem, yelem;
+
+	src = lcdc.vram_phys + lcdc.frame_offset;
+
+	switch (var->rotate) {
+	case 0:
+		if (plane->info.mirror || (src & 3) ||
+		    lcdc.color_mode == OMAPFB_COLOR_YUV420 ||
+		    (lcdc.xres & 1))
+			esize = 2;
+		else
+			esize = 4;
+		xelem = lcdc.xres * lcdc.bpp / 8 / esize;
+		yelem = lcdc.yres;
+		break;
+	case 90:
+	case 180:
+	case 270:
+		if (cpu_is_omap15xx()) {
+			BUG();
+		}
+		esize = 2;
+		xelem = lcdc.yres * lcdc.bpp / 16;
+		yelem = lcdc.xres;
+		break;
+	default:
+		BUG();
+		return;
+	}
+#ifdef VERBOSE
+	dev_dbg(lcdc.fbdev->dev,
+		 "setup_dma: src %#010lx esize %d xelem %d yelem %d\n",
+		 src, esize, xelem, yelem);
+#endif
+	omap_set_lcd_dma_b1(src, xelem, yelem, dma_elem_type[esize]);
+	if (!cpu_is_omap15xx()) {
+		int bpp = lcdc.bpp;
+
+		/*
+		 * YUV support is only for external mode when we have the
+		 * YUV window embedded in a 16bpp frame buffer.
+		 */
+		if (lcdc.color_mode == OMAPFB_COLOR_YUV420)
+			bpp = 16;
+		/* Set virtual xres elem size */
+		omap_set_lcd_dma_b1_vxres(
+			lcdc.screen_width * bpp / 8 / esize);
+		/* Setup transformations */
+		omap_set_lcd_dma_b1_rotation(var->rotate);
+		omap_set_lcd_dma_b1_mirror(plane->info.mirror);
+	}
+	omap_setup_lcd_dma();
+}
+
+static irqreturn_t lcdc_irq_handler(int irq, void *dev_id)
+{
+	u32 status;
+
+	status = omap_readl(OMAP_LCDC_STATUS);
+
+	if (status & (OMAP_LCDC_STAT_FUF | OMAP_LCDC_STAT_SYNC_LOST))
+		reset_controller(status);
+	else {
+		if (status & OMAP_LCDC_STAT_DONE) {
+			u32 l;
+
+			/*
+			 * Disable IRQ_DONE. The status bit will be cleared
+			 * only when the controller is reenabled and we don't
+			 * want to get more interrupts.
+			 */
+			l = omap_readl(OMAP_LCDC_CONTROL);
+			l &= ~OMAP_LCDC_IRQ_DONE;
+			omap_writel(l, OMAP_LCDC_CONTROL);
+			complete(&lcdc.last_frame_complete);
+		}
+		if (status & OMAP_LCDC_STAT_LOADED_PALETTE) {
+			disable_controller_async();
+			complete(&lcdc.palette_load_complete);
+		}
+	}
+
+	/*
+	 * Clear these interrupt status bits.
+	 * Sync_lost, FUF bits were cleared by disabling the LCD controller
+	 * LOADED_PALETTE can be cleared this way only in palette only
+	 * load mode. In other load modes it's cleared by disabling the
+	 * controller.
+	 */
+	status &= ~(OMAP_LCDC_STAT_VSYNC |
+		    OMAP_LCDC_STAT_LOADED_PALETTE |
+		    OMAP_LCDC_STAT_ABC |
+		    OMAP_LCDC_STAT_LINE_INT);
+	omap_writel(status, OMAP_LCDC_STATUS);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Change to a new video mode. We defer this to a later time to avoid any
+ * flicker and not to mess up the current LCD DMA context. For this we disable
+ * the LCD controler, which will generate a DONE irq after the last frame has
+ * been transferred. Then it'll be safe to reconfigure both the LCD controller
+ * as well as the LCD DMA.
+ */
+static int omap_lcdc_setup_plane(int plane, int channel_out,
+				 unsigned long offset, int screen_width,
+				 int pos_x, int pos_y, int width, int height,
+				 int color_mode)
+{
+	struct fb_var_screeninfo *var = &lcdc.fbdev->fb_info[0]->var;
+	struct lcd_panel *panel = lcdc.fbdev->panel;
+	int rot_x, rot_y;
+
+	if (var->rotate == 0) {
+		rot_x = panel->x_res;
+		rot_y = panel->y_res;
+	} else {
+		rot_x = panel->y_res;
+		rot_y = panel->x_res;
+	}
+	if (plane != 0 || channel_out != 0 || pos_x != 0 || pos_y != 0 ||
+	    width > rot_x || height > rot_y) {
+#ifdef VERBOSE
+		dev_dbg(lcdc.fbdev->dev,
+			"invalid plane params plane %d pos_x %d pos_y %d "
+			"w %d h %d\n", plane, pos_x, pos_y, width, height);
+#endif
+		return -EINVAL;
+	}
+
+	lcdc.frame_offset = offset;
+	lcdc.xres = width;
+	lcdc.yres = height;
+	lcdc.screen_width = screen_width;
+	lcdc.color_mode = color_mode;
+
+	switch (color_mode) {
+	case OMAPFB_COLOR_CLUT_8BPP:
+		lcdc.bpp = 8;
+		lcdc.palette_code = 0x3000;
+		lcdc.palette_size = 512;
+		break;
+	case OMAPFB_COLOR_RGB565:
+		lcdc.bpp = 16;
+		lcdc.palette_code = 0x4000;
+		lcdc.palette_size = 32;
+		break;
+	case OMAPFB_COLOR_RGB444:
+		lcdc.bpp = 16;
+		lcdc.palette_code = 0x4000;
+		lcdc.palette_size = 32;
+		break;
+	case OMAPFB_COLOR_YUV420:
+		if (lcdc.ext_mode) {
+			lcdc.bpp = 12;
+			break;
+		}
+		/* fallthrough */
+	case OMAPFB_COLOR_YUV422:
+		if (lcdc.ext_mode) {
+			lcdc.bpp = 16;
+			break;
+		}
+		/* fallthrough */
+	default:
+		/* FIXME: other BPPs.
+		 * bpp1: code  0,     size 256
+		 * bpp2: code  0x1000 size 256
+		 * bpp4: code  0x2000 size 256
+		 * bpp12: code 0x4000 size 32
+		 */
+		dev_dbg(lcdc.fbdev->dev, "invalid color mode %d\n", color_mode);
+		BUG();
+		return -1;
+	}
+
+	if (lcdc.ext_mode) {
+		setup_lcd_dma();
+		return 0;
+	}
+
+	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
+		disable_controller();
+		omap_stop_lcd_dma();
+		setup_lcd_dma();
+		enable_controller();
+	}
+
+	return 0;
+}
+
+static int omap_lcdc_enable_plane(int plane, int enable)
+{
+	dev_dbg(lcdc.fbdev->dev,
+		"plane %d enable %d update_mode %d ext_mode %d\n",
+		plane, enable, lcdc.update_mode, lcdc.ext_mode);
+	if (plane != OMAPFB_PLANE_GFX)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Configure the LCD DMA for a palette load operation and do the palette
+ * downloading synchronously. We don't use the frame+palette load mode of
+ * the controller, since the palette can always be downloaded seperately.
+ */
+static void load_palette(void)
+{
+	u16	*palette;
+
+	palette = (u16 *)lcdc.palette_virt;
+
+	*(u16 *)palette &= 0x0fff;
+	*(u16 *)palette |= lcdc.palette_code;
+
+	omap_set_lcd_dma_b1(lcdc.palette_phys,
+		lcdc.palette_size / 4 + 1, 1, OMAP_DMA_DATA_TYPE_S32);
+
+	omap_set_lcd_dma_single_transfer(1);
+	omap_setup_lcd_dma();
+
+	init_completion(&lcdc.palette_load_complete);
+	enable_irqs(OMAP_LCDC_IRQ_LOADED_PALETTE);
+	set_load_mode(OMAP_LCDC_LOAD_PALETTE);
+	enable_controller();
+	if (!wait_for_completion_timeout(&lcdc.palette_load_complete,
+				msecs_to_jiffies(500)))
+		dev_err(lcdc.fbdev->dev, "timeout waiting for FRAME DONE\n");
+	/* The controller gets disabled in the irq handler */
+	disable_irqs(OMAP_LCDC_IRQ_LOADED_PALETTE);
+	omap_stop_lcd_dma();
+
+	omap_set_lcd_dma_single_transfer(lcdc.ext_mode);
+}
+
+/* Used only in internal controller mode */
+static int omap_lcdc_setcolreg(u_int regno, u16 red, u16 green, u16 blue,
+			       u16 transp, int update_hw_pal)
+{
+	u16 *palette;
+
+	if (lcdc.color_mode != OMAPFB_COLOR_CLUT_8BPP || regno > 255)
+		return -EINVAL;
+
+	palette = (u16 *)lcdc.palette_virt;
+
+	palette[regno] &= ~0x0fff;
+	palette[regno] |= ((red >> 12) << 8) | ((green >> 12) << 4 ) |
+			   (blue >> 12);
+
+	if (update_hw_pal) {
+		disable_controller();
+		omap_stop_lcd_dma();
+		load_palette();
+		setup_lcd_dma();
+		set_load_mode(OMAP_LCDC_LOAD_FRAME);
+		enable_controller();
+	}
+
+	return 0;
+}
+
+static void calc_ck_div(int is_tft, int pck, int *pck_div)
+{
+	unsigned long lck;
+
+	pck = max(1, pck);
+	lck = clk_get_rate(lcdc.lcd_ck);
+	*pck_div = (lck + pck - 1) / pck;
+	if (is_tft)
+		*pck_div = max(2, *pck_div);
+	else
+		*pck_div = max(3, *pck_div);
+	if (*pck_div > 255) {
+		/* FIXME: try to adjust logic clock divider as well */
+		*pck_div = 255;
+		dev_warn(lcdc.fbdev->dev, "pixclock %d kHz too low.\n",
+			 pck / 1000);
+	}
+}
+
+static void inline setup_regs(void)
+{
+	u32 l;
+	struct lcd_panel *panel = lcdc.fbdev->panel;
+	int is_tft = panel->config & OMAP_LCDC_PANEL_TFT;
+	unsigned long lck;
+	int pcd;
+
+	l = omap_readl(OMAP_LCDC_CONTROL);
+	l &= ~OMAP_LCDC_CTRL_LCD_TFT;
+	l |= is_tft ? OMAP_LCDC_CTRL_LCD_TFT : 0;
+#ifdef CONFIG_MACH_OMAP_PALMTE
+/* FIXME:if (machine_is_omap_palmte()) { */
+		/* PalmTE uses alternate TFT setting in 8BPP mode */
+		l |= (is_tft && panel->bpp == 8) ? 0x810000 : 0;
+/*	} */
+#endif
+	omap_writel(l, OMAP_LCDC_CONTROL);
+
+	l = omap_readl(OMAP_LCDC_TIMING2);
+	l &= ~(((1 << 6) - 1) << 20);
+	l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 20;
+	omap_writel(l, OMAP_LCDC_TIMING2);
+
+	l = panel->x_res - 1;
+	l |= (panel->hsw - 1) << 10;
+	l |= (panel->hfp - 1) << 16;
+	l |= (panel->hbp - 1) << 24;
+	omap_writel(l, OMAP_LCDC_TIMING0);
+
+	l = panel->y_res - 1;
+	l |= (panel->vsw - 1) << 10;
+	l |= panel->vfp << 16;
+	l |= panel->vbp << 24;
+	omap_writel(l, OMAP_LCDC_TIMING1);
+
+	l = omap_readl(OMAP_LCDC_TIMING2);
+	l &= ~0xff;
+
+	lck = clk_get_rate(lcdc.lcd_ck);
+
+	if (!panel->pcd)
+		calc_ck_div(is_tft, panel->pixel_clock * 1000, &pcd);
+	else {
+		dev_warn(lcdc.fbdev->dev,
+		    "Pixel clock divider value is obsolete.\n"
+		    "Try to set pixel_clock to %lu and pcd to 0 "
+		    "in drivers/video/omap/lcd_%s.c and submit a patch.\n",
+			lck / panel->pcd / 1000, panel->name);
+
+		pcd = panel->pcd;
+	}
+	l |= pcd & 0xff;
+	l |= panel->acb << 8;
+	omap_writel(l, OMAP_LCDC_TIMING2);
+
+	/* update panel info with the exact clock */
+	panel->pixel_clock = lck / pcd / 1000;
+}
+
+/*
+ * Configure the LCD controller, download the color palette and start a looped
+ * DMA transfer of the frame image data. Called only in internal
+ * controller mode.
+ */
+static int omap_lcdc_set_update_mode(enum omapfb_update_mode mode)
+{
+	int r = 0;
+
+	if (mode != lcdc.update_mode) {
+		switch (mode) {
+		case OMAPFB_AUTO_UPDATE:
+			setup_regs();
+			load_palette();
+
+			/* Setup and start LCD DMA */
+			setup_lcd_dma();
+
+			set_load_mode(OMAP_LCDC_LOAD_FRAME);
+			enable_irqs(OMAP_LCDC_IRQ_DONE);
+			/* This will start the actual DMA transfer */
+			enable_controller();
+			lcdc.update_mode = mode;
+			break;
+		case OMAPFB_UPDATE_DISABLED:
+			disable_controller();
+			omap_stop_lcd_dma();
+			lcdc.update_mode = mode;
+			break;
+		default:
+			r = -EINVAL;
+		}
+	}
+
+	return r;
+}
+
+static enum omapfb_update_mode omap_lcdc_get_update_mode(void)
+{
+	return lcdc.update_mode;
+}
+
+/* PM code called only in internal controller mode */
+static void omap_lcdc_suspend(void)
+{
+	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
+		disable_controller();
+		omap_stop_lcd_dma();
+	}
+}
+
+static void omap_lcdc_resume(void)
+{
+	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
+		setup_regs();
+		load_palette();
+		setup_lcd_dma();
+		set_load_mode(OMAP_LCDC_LOAD_FRAME);
+		enable_irqs(OMAP_LCDC_IRQ_DONE);
+		enable_controller();
+	}
+}
+
+static void omap_lcdc_get_caps(int plane, struct omapfb_caps *caps)
+{
+	return;
+}
+
+int omap_lcdc_set_dma_callback(void (*callback)(void *data), void *data)
+{
+	BUG_ON(callback == NULL);
+
+	if (lcdc.dma_callback)
+		return -EBUSY;
+	else {
+		lcdc.dma_callback = callback;
+		lcdc.dma_callback_data = data;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(omap_lcdc_set_dma_callback);
+
+void omap_lcdc_free_dma_callback(void)
+{
+	lcdc.dma_callback = NULL;
+}
+EXPORT_SYMBOL(omap_lcdc_free_dma_callback);
+
+static void lcdc_dma_handler(u16 status, void *data)
+{
+	if (lcdc.dma_callback)
+		lcdc.dma_callback(lcdc.dma_callback_data);
+}
+
+static int mmap_kern(void)
+{
+	struct vm_struct	*kvma;
+	struct vm_area_struct	vma;
+	pgprot_t		pgprot;
+	unsigned long		vaddr;
+
+	kvma = get_vm_area(lcdc.vram_size, VM_IOREMAP);
+	if (kvma == NULL) {
+		dev_err(lcdc.fbdev->dev, "can't get kernel vm area\n");
+		return -ENOMEM;
+	}
+	vma.vm_mm = &init_mm;
+
+	vaddr = (unsigned long)kvma->addr;
+	vma.vm_start = vaddr;
+	vma.vm_end = vaddr + lcdc.vram_size;
+
+	pgprot = pgprot_writecombine(pgprot_kernel);
+	if (io_remap_pfn_range(&vma, vaddr,
+			   lcdc.vram_phys >> PAGE_SHIFT,
+			   lcdc.vram_size, pgprot) < 0) {
+		dev_err(lcdc.fbdev->dev, "kernel mmap for FB memory failed\n");
+		return -EAGAIN;
+	}
+
+	lcdc.vram_virt = (void *)vaddr;
+
+	return 0;
+}
+
+static void unmap_kern(void)
+{
+	vunmap(lcdc.vram_virt);
+}
+
+static int alloc_palette_ram(void)
+{
+	lcdc.palette_virt = dma_alloc_writecombine(lcdc.fbdev->dev,
+		MAX_PALETTE_SIZE, &lcdc.palette_phys, GFP_KERNEL);
+	if (lcdc.palette_virt == NULL) {
+		dev_err(lcdc.fbdev->dev, "failed to alloc palette memory\n");
+		return -ENOMEM;
+	}
+	memset(lcdc.palette_virt, 0, MAX_PALETTE_SIZE);
+
+	return 0;
+}
+
+static void free_palette_ram(void)
+{
+	dma_free_writecombine(lcdc.fbdev->dev, MAX_PALETTE_SIZE,
+			lcdc.palette_virt, lcdc.palette_phys);
+}
+
+static int alloc_fbmem(struct omapfb_mem_region *region)
+{
+	int bpp;
+	int frame_size;
+	struct lcd_panel *panel = lcdc.fbdev->panel;
+
+	bpp = panel->bpp;
+	if (bpp == 12)
+		bpp = 16;
+	frame_size = PAGE_ALIGN(panel->x_res * bpp / 8 * panel->y_res);
+	if (region->size > frame_size)
+		frame_size = region->size;
+	lcdc.vram_size = frame_size;
+	lcdc.vram_virt = dma_alloc_writecombine(lcdc.fbdev->dev,
+			lcdc.vram_size, &lcdc.vram_phys, GFP_KERNEL);
+	if (lcdc.vram_virt == NULL) {
+		dev_err(lcdc.fbdev->dev, "unable to allocate FB DMA memory\n");
+		return -ENOMEM;
+	}
+	region->size = frame_size;
+	region->paddr = lcdc.vram_phys;
+	region->vaddr = lcdc.vram_virt;
+	region->alloc = 1;
+
+	memset(lcdc.vram_virt, 0, lcdc.vram_size);
+
+	return 0;
+}
+
+static void free_fbmem(void)
+{
+	dma_free_writecombine(lcdc.fbdev->dev, lcdc.vram_size,
+			      lcdc.vram_virt, lcdc.vram_phys);
+}
+
+static int setup_fbmem(struct omapfb_mem_desc *req_md)
+{
+	int r;
+
+	if (!req_md->region_cnt) {
+		dev_err(lcdc.fbdev->dev, "no memory regions defined\n");
+		return -EINVAL;
+	}
+
+	if (req_md->region_cnt > 1) {
+		dev_err(lcdc.fbdev->dev, "only one plane is supported\n");
+		req_md->region_cnt = 1;
+	}
+
+	if (req_md->region[0].paddr == 0) {
+		lcdc.fbmem_allocated = 1;
+		if ((r = alloc_fbmem(&req_md->region[0])) < 0)
+			return r;
+		return 0;
+	}
+
+	lcdc.vram_phys = req_md->region[0].paddr;
+	lcdc.vram_size = req_md->region[0].size;
+
+	if ((r = mmap_kern()) < 0)
+		return r;
+
+	dev_dbg(lcdc.fbdev->dev, "vram at %08x size %08lx mapped to 0x%p\n",
+		 lcdc.vram_phys, lcdc.vram_size, lcdc.vram_virt);
+
+	return 0;
+}
+
+static void cleanup_fbmem(void)
+{
+	if (lcdc.fbmem_allocated)
+		free_fbmem();
+	else
+		unmap_kern();
+}
+
+static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
+			  struct omapfb_mem_desc *req_vram)
+{
+	int r;
+	u32 l;
+	int rate;
+	struct clk *tc_ck;
+
+	lcdc.irq_mask = 0;
+
+	lcdc.fbdev = fbdev;
+	lcdc.ext_mode = ext_mode;
+
+	l = 0;
+	omap_writel(l, OMAP_LCDC_CONTROL);
+
+	/* FIXME:
+	 * According to errata some platforms have a clock rate limitiation
+	 */
+	lcdc.lcd_ck = clk_get(NULL, "lcd_ck");
+	if (IS_ERR(lcdc.lcd_ck)) {
+		dev_err(fbdev->dev, "unable to access LCD clock\n");
+		r = PTR_ERR(lcdc.lcd_ck);
+		goto fail0;
+	}
+
+	tc_ck = clk_get(NULL, "tc_ck");
+	if (IS_ERR(tc_ck)) {
+		dev_err(fbdev->dev, "unable to access TC clock\n");
+		r = PTR_ERR(tc_ck);
+		goto fail1;
+	}
+
+	rate = clk_get_rate(tc_ck);
+	clk_put(tc_ck);
+
+	if (machine_is_ams_delta())
+		rate /= 4;
+	if (machine_is_omap_h3())
+		rate /= 3;
+	r = clk_set_rate(lcdc.lcd_ck, rate);
+	if (r) {
+		dev_err(fbdev->dev, "failed to adjust LCD rate\n");
+		goto fail1;
+	}
+	clk_enable(lcdc.lcd_ck);
+
+	r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
+	if (r) {
+		dev_err(fbdev->dev, "unable to get IRQ\n");
+		goto fail2;
+	}
+
+	r = omap_request_lcd_dma(lcdc_dma_handler, NULL);
+	if (r) {
+		dev_err(fbdev->dev, "unable to get LCD DMA\n");
+		goto fail3;
+	}
+
+	omap_set_lcd_dma_single_transfer(ext_mode);
+	omap_set_lcd_dma_ext_controller(ext_mode);
+
+	if (!ext_mode)
+		if ((r = alloc_palette_ram()) < 0)
+			goto fail4;
+
+	if ((r = setup_fbmem(req_vram)) < 0)
+		goto fail5;
+
+	pr_info("omapfb: LCDC initialized\n");
+
+	return 0;
+fail5:
+	if (!ext_mode)
+		free_palette_ram();
+fail4:
+	omap_free_lcd_dma();
+fail3:
+	free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
+fail2:
+	clk_disable(lcdc.lcd_ck);
+fail1:
+	clk_put(lcdc.lcd_ck);
+fail0:
+	return r;
+}
+
+static void omap_lcdc_cleanup(void)
+{
+	if (!lcdc.ext_mode)
+		free_palette_ram();
+	cleanup_fbmem();
+	omap_free_lcd_dma();
+	free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
+	clk_disable(lcdc.lcd_ck);
+	clk_put(lcdc.lcd_ck);
+}
+
+const struct lcd_ctrl omap1_int_ctrl = {
+	.name			= "internal",
+	.init			= omap_lcdc_init,
+	.cleanup		= omap_lcdc_cleanup,
+	.get_caps		= omap_lcdc_get_caps,
+	.set_update_mode	= omap_lcdc_set_update_mode,
+	.get_update_mode	= omap_lcdc_get_update_mode,
+	.update_window		= NULL,
+	.suspend		= omap_lcdc_suspend,
+	.resume			= omap_lcdc_resume,
+	.setup_plane		= omap_lcdc_setup_plane,
+	.enable_plane		= omap_lcdc_enable_plane,
+	.setcolreg		= omap_lcdc_setcolreg,
+};

drivers/video/omap/lcdc.h

+#ifndef LCDC_H
+#define LCDC_H
+
+int omap_lcdc_set_dma_callback(void (*callback)(void *data), void *data);
+void omap_lcdc_free_dma_callback(void);
+
+#endif