Merge greg@deskfan:linux/BK/i2c-new_drivers-2.6

into kroah.com:/home/greg/linux/BK/i2c-new_drivers-2.6

drivers/i2c/chips/Kconfig

@@ -68,6 +68,17 @@ config SENSORS_LM78
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm78.
 
+config SENSORS_LM83
+	tristate "National Semiconductor LM83"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor
+	  LM83 sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm83.
+
 config SENSORS_LM85
 	tristate "National Semiconductor LM85 and compatibles"
 	depends on I2C && EXPERIMENTAL

drivers/i2c/chips/Makefile

@@ -10,5 +10,6 @@ obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
 obj-$(CONFIG_SENSORS_LM78)	+= lm78.o
+obj-$(CONFIG_SENSORS_LM83)	+= lm83.o
 obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o

drivers/i2c/chips/lm83.c

+/*
+ * lm83.c - Part of lm_sensors, Linux kernel modules for hardware
+ *          monitoring
+ * Copyright (C) 2003  Jean Delvare <khali@linux-fr.org>
+ *
+ * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
+ * a sensor chip made by National Semiconductor. It reports up to four
+ * temperatures (its own plus up to three external ones) with a 1 deg
+ * resolution and a 3-4 deg accuracy. Complete datasheet can be obtained
+ * from National's website at:
+ *   http://www.national.com/pf/LM/LM83.html
+ * Since the datasheet omits to give the chip stepping code, I give it
+ * here: 0x03 (at register 0xff).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/*
+ * Addresses to scan
+ * Address is selected using 2 three-level pins, resulting in 9 possible
+ * addresses.
+ */
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { 0x18, 0x1a, 0x29, 0x2b,
+    0x4c, 0x4e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(lm83);
+
+/*
+ * The LM83 registers
+ * Manufacturer ID is 0x01 for National Semiconductor.
+ */
+
+#define LM83_REG_R_MAN_ID		0xFE
+#define LM83_REG_R_CHIP_ID		0xFF
+#define LM83_REG_R_CONFIG		0x03
+#define LM83_REG_W_CONFIG		0x09
+#define LM83_REG_R_STATUS1		0x02
+#define LM83_REG_R_STATUS2		0x35
+#define LM83_REG_R_LOCAL_TEMP		0x00
+#define LM83_REG_R_LOCAL_HIGH		0x05
+#define LM83_REG_W_LOCAL_HIGH		0x0B
+#define LM83_REG_R_REMOTE1_TEMP		0x30
+#define LM83_REG_R_REMOTE1_HIGH		0x38
+#define LM83_REG_W_REMOTE1_HIGH		0x50
+#define LM83_REG_R_REMOTE2_TEMP		0x01
+#define LM83_REG_R_REMOTE2_HIGH		0x07
+#define LM83_REG_W_REMOTE2_HIGH		0x0D
+#define LM83_REG_R_REMOTE3_TEMP		0x31
+#define LM83_REG_R_REMOTE3_HIGH		0x3A
+#define LM83_REG_W_REMOTE3_HIGH		0x52
+#define LM83_REG_R_TCRIT		0x42
+#define LM83_REG_W_TCRIT		0x5A
+
+/*
+ * Conversions, initial values and various macros
+ * The LM83 uses signed 8-bit values.
+ */
+
+#define TEMP_FROM_REG(val)	((val > 127 ? val-256 : val) * 1000)
+#define TEMP_TO_REG(val)	((val < 0 ? val+256 : val) / 1000)
+
+#define LM83_INIT_HIGH		100
+#define LM83_INIT_CRIT		120
+
+static const u8 LM83_REG_R_TEMP[] = {
+	LM83_REG_R_LOCAL_TEMP,
+	LM83_REG_R_REMOTE1_TEMP,
+	LM83_REG_R_REMOTE2_TEMP,
+	LM83_REG_R_REMOTE3_TEMP
+};
+
+static const u8 LM83_REG_R_HIGH[] = {
+	LM83_REG_R_LOCAL_HIGH,
+	LM83_REG_R_REMOTE1_HIGH,
+	LM83_REG_R_REMOTE2_HIGH,
+	LM83_REG_R_REMOTE3_HIGH
+};
+
+static const u8 LM83_REG_W_HIGH[] = {
+	LM83_REG_W_LOCAL_HIGH,
+	LM83_REG_W_REMOTE1_HIGH,
+	LM83_REG_W_REMOTE2_HIGH,
+	LM83_REG_W_REMOTE3_HIGH
+};
+
+/*
+ * Functions declaration
+ */
+
+static int lm83_attach_adapter(struct i2c_adapter *adapter);
+static int lm83_detect(struct i2c_adapter *adapter, int address,
+    int kind);
+static void lm83_init_client(struct i2c_client *client);
+static int lm83_detach_client(struct i2c_client *client);
+static void lm83_update_client(struct i2c_client *client);
+
+/*
+ * Driver data (common to all clients)
+ */
+ 
+static struct i2c_driver lm83_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "lm83",
+	.id		= I2C_DRIVERID_LM83,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= lm83_attach_adapter,
+	.detach_client	= lm83_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct lm83_data
+{
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	u8 temp_input[4];
+	u8 temp_high[4];
+	u8 temp_crit;
+	u16 alarms; /* bitvector, combined */
+};
+
+/*
+ * Internal variables
+ */
+
+static int lm83_id = 0;
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_temp(suffix, value) \
+static ssize_t show_temp_##suffix(struct device *dev, char *buf) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm83_data *data = i2c_get_clientdata(client); \
+	lm83_update_client(client); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
+}
+show_temp(input1, temp_input[0]);
+show_temp(input2, temp_input[1]);
+show_temp(input3, temp_input[2]);
+show_temp(input4, temp_input[3]);
+show_temp(high1, temp_high[0]);
+show_temp(high2, temp_high[1]);
+show_temp(high3, temp_high[2]);
+show_temp(high4, temp_high[3]);
+show_temp(crit, temp_crit);
+
+#define set_temp(suffix, value, reg) \
+static ssize_t set_temp_##suffix(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct lm83_data *data = i2c_get_clientdata(client); \
+	data->value = TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \
+	i2c_smbus_write_byte_data(client, reg, data->value); \
+	return count; \
+}
+set_temp(high1, temp_high[0], LM83_REG_W_LOCAL_HIGH);
+set_temp(high2, temp_high[1], LM83_REG_W_REMOTE1_HIGH);
+set_temp(high3, temp_high[2], LM83_REG_W_REMOTE2_HIGH);
+set_temp(high4, temp_high[3], LM83_REG_W_REMOTE3_HIGH);
+set_temp(crit, temp_crit, LM83_REG_W_TCRIT);
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm83_data *data = i2c_get_clientdata(client);
+	lm83_update_client(client);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp_input2, S_IRUGO, show_temp_input2, NULL);
+static DEVICE_ATTR(temp_input3, S_IRUGO, show_temp_input3, NULL);
+static DEVICE_ATTR(temp_input4, S_IRUGO, show_temp_input4, NULL);
+static DEVICE_ATTR(temp_max1, S_IWUSR | S_IRUGO, show_temp_high1,
+    set_temp_high1);
+static DEVICE_ATTR(temp_max2, S_IWUSR | S_IRUGO, show_temp_high2,
+    set_temp_high2);
+static DEVICE_ATTR(temp_max3, S_IWUSR | S_IRUGO, show_temp_high3,
+    set_temp_high3);
+static DEVICE_ATTR(temp_max4, S_IWUSR | S_IRUGO, show_temp_high4,
+    set_temp_high4);
+static DEVICE_ATTR(temp_crit, S_IWUSR | S_IRUGO, show_temp_crit,
+    set_temp_crit);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int lm83_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_ADAP_CLASS_SMBUS))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm83_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int lm83_detect(struct i2c_adapter *adapter, int address,
+    int kind)
+{
+	struct i2c_client *new_client;
+	struct lm83_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(new_client = kmalloc(sizeof(struct i2c_client) +
+	    sizeof(struct lm83_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(new_client, 0x00, sizeof(struct i2c_client) +
+	    sizeof(struct lm83_data));
+
+	/* The LM83-specific data is placed right after the common I2C
+	 * client data. */
+	data = (struct lm83_data *) (new_client + 1);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm83_driver;
+	new_client->flags = 0;
+
+	/* Now we do the detection and identification. A negative kind
+	 * means that the driver was loaded with no force parameter
+	 * (default), so we must both detect and identify the chip
+	 * (actually there is only one possible kind of chip for now, LM83).
+	 * A zero kind means that the driver was loaded with the force
+	 * parameter, the detection step shall be skipped. A positive kind
+	 * means that the driver was loaded with the force parameter and a
+	 * given kind of chip is requested, so both the detection and the
+	 * identification steps are skipped. */
+	if (kind < 0) { /* detection */
+		if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
+		    & 0xA8) != 0x00) ||
+		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
+		    & 0x48) != 0x00) ||
+		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
+		    & 0x41) != 0x00)) {
+			dev_dbg(&client->dev,
+			    "LM83 detection failed at 0x%02x.\n", address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+		u8 man_id, chip_id;
+
+		man_id = i2c_smbus_read_byte_data(new_client,
+		    LM83_REG_R_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+		    LM83_REG_R_CHIP_ID);
+		if (man_id == 0x01) { /* National Semiconductor */
+			if (chip_id == 0x03) {
+				kind = lm83;
+				name = "lm83";
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	new_client->id = lm83_id++;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the LM83 chip */
+	lm83_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp_input1);
+	device_create_file(&new_client->dev, &dev_attr_temp_input2);
+	device_create_file(&new_client->dev, &dev_attr_temp_input3);
+	device_create_file(&new_client->dev, &dev_attr_temp_input4);
+	device_create_file(&new_client->dev, &dev_attr_temp_max1);
+	device_create_file(&new_client->dev, &dev_attr_temp_max2);
+	device_create_file(&new_client->dev, &dev_attr_temp_max3);
+	device_create_file(&new_client->dev, &dev_attr_temp_max4);
+	device_create_file(&new_client->dev, &dev_attr_temp_crit);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(new_client);
+exit:
+	return err;
+}
+
+static void lm83_init_client(struct i2c_client *client)
+{
+	int nr;
+
+	for (nr = 0; nr < 4; nr++)
+		i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr],
+	            TEMP_TO_REG(LM83_INIT_HIGH));
+	i2c_smbus_write_byte_data(client, LM83_REG_W_TCRIT,
+	    TEMP_TO_REG(LM83_INIT_CRIT));
+}
+
+static int lm83_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		    "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	kfree(client);
+	return 0;
+}
+
+static void lm83_update_client(struct i2c_client *client)
+{
+	struct lm83_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if ((jiffies - data->last_updated > HZ * 2) ||
+	    (jiffies < data->last_updated) ||
+	    !data->valid) {
+		int nr;
+		dev_dbg(&client->dev, "Updating lm83 data.\n");
+		for (nr = 0; nr < 4 ; nr++) {
+			data->temp_input[nr] =
+			    i2c_smbus_read_byte_data(client,
+			    LM83_REG_R_TEMP[nr]);
+			data->temp_high[nr] =
+			    i2c_smbus_read_byte_data(client,
+			    LM83_REG_R_HIGH[nr]);
+		}
+		data->temp_crit =
+		    i2c_smbus_read_byte_data(client, LM83_REG_R_TCRIT);
+		data->alarms =
+		    i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1)
+		    + (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2)
+		    << 8);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+}
+
+static int __init sensors_lm83_init(void)
+{
+	return i2c_add_driver(&lm83_driver);
+}
+
+static void __exit sensors_lm83_exit(void)
+{
+	i2c_del_driver(&lm83_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("LM83 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm83_init);
+module_exit(sensors_lm83_exit);

include/linux/i2c-id.h

@@ -153,6 +153,7 @@
 #define I2C_DRIVERID_FS451 1037
 #define I2C_DRIVERID_W83627HF 1038
 #define I2C_DRIVERID_LM85 1039
+#define I2C_DRIVERID_LM83 1040
 
 /*
  * ---- Adapter types ----------------------------------------------------