Commit 57e6dae1 authored by Clemens Ladisch's avatar Clemens Ladisch Committed by Takashi Iwai

ALSA: usb-audio: do not trust too-big wMaxPacketSize values

The driver used to assume that the streaming endpoint's wMaxPacketSize
value would be an indication of how much data the endpoint expects or
sends, and compute the number of packets per URB using this value.

However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes,
while only about 88 or 44 bytes are be actually used.  This discrepancy
would result in URBs with far too few packets, which would not work
correctly on the EHCI driver.

To get correct URBs, use wMaxPacketSize only as an upper limit on the
packet size.
Reported-by: default avatarJames Stone <jamesmstone@gmail.com>
Tested-by: default avatarJames Stone <jamesmstone@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.35+
Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent ddb6b5a9
...@@ -591,17 +591,16 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep, ...@@ -591,17 +591,16 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep,
ep->stride = frame_bits >> 3; ep->stride = frame_bits >> 3;
ep->silence_value = pcm_format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0; ep->silence_value = pcm_format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0;
/* calculate max. frequency */ /* assume max. frequency is 25% higher than nominal */
if (ep->maxpacksize) { ep->freqmax = ep->freqn + (ep->freqn >> 2);
maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3))
>> (16 - ep->datainterval);
/* but wMaxPacketSize might reduce this */
if (ep->maxpacksize && ep->maxpacksize < maxsize) {
/* whatever fits into a max. size packet */ /* whatever fits into a max. size packet */
maxsize = ep->maxpacksize; maxsize = ep->maxpacksize;
ep->freqmax = (maxsize / (frame_bits >> 3)) ep->freqmax = (maxsize / (frame_bits >> 3))
<< (16 - ep->datainterval); << (16 - ep->datainterval);
} else {
/* no max. packet size: just take 25% higher than nominal */
ep->freqmax = ep->freqn + (ep->freqn >> 2);
maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3))
>> (16 - ep->datainterval);
} }
if (ep->fill_max) if (ep->fill_max)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment