mfd: Avoid to use constraint name in 88pm860x regulator driver

Avoid to use constraint name in regulator driver. So use regulator id is used
instead in platform driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/88pm860x-core.c

@@ -578,7 +578,7 @@ static void __devinit device_regulator_init(struct pm860x_chip *chip,
 {
 	struct regulator_init_data *initdata;
 	int ret;
-	int i, j;
+	int i, seq;
 
 	if ((pdata == NULL) || (pdata->regulator == NULL))
 		return;
@@ -586,40 +586,21 @@ static void __devinit device_regulator_init(struct pm860x_chip *chip,
 	if (pdata->num_regulators > ARRAY_SIZE(regulator_devs))
 		pdata->num_regulators = ARRAY_SIZE(regulator_devs);
 
-	for (i = 0, j = -1; i < pdata->num_regulators; i++) {
+	for (i = 0, seq = -1; i < pdata->num_regulators; i++) {
 		initdata = &pdata->regulator[i];
-		if (strstr(initdata->constraints.name, "BUCK")) {
-			sscanf(initdata->constraints.name, "BUCK%d", &j);
-			/* BUCK1 ~ BUCK3 */
-			if ((j < 1) || (j > 3)) {
-				dev_err(chip->dev, "Failed to add constraint "
-					"(%s)\n", initdata->constraints.name);
-				goto out;
-			}
-			j = (j - 1) + PM8607_ID_BUCK1;
-		}
-		if (strstr(initdata->constraints.name, "LDO")) {
-			sscanf(initdata->constraints.name, "LDO%d", &j);
-			/* LDO1 ~ LDO15 */
-			if ((j < 1) || (j > 15)) {
-				dev_err(chip->dev, "Failed to add constraint "
-					"(%s)\n", initdata->constraints.name);
-				goto out;
-			}
-			j = (j - 1) + PM8607_ID_LDO1;
-		}
-		if (j == -1) {
-			dev_err(chip->dev, "Failed to add constraint (%s)\n",
-				initdata->constraints.name);
+		seq = *(unsigned int *)initdata->driver_data;
+		if ((seq < 0) || (seq > PM8607_ID_RG_MAX)) {
+			dev_err(chip->dev, "Wrong ID(%d) on regulator(%s)\n",
+				seq, initdata->constraints.name);
 			goto out;
 		}
 		regulator_devs[i].platform_data = &pdata->regulator[i];
 		regulator_devs[i].pdata_size = sizeof(struct regulator_init_data);
 		regulator_devs[i].num_resources = 1;
-		regulator_devs[i].resources = &regulator_resources[j];
+		regulator_devs[i].resources = &regulator_resources[seq];
 
 		ret = mfd_add_devices(chip->dev, 0, &regulator_devs[i], 1,
-				      &regulator_resources[j], 0);
+				      &regulator_resources[seq], 0);
 		if (ret < 0) {
 			dev_err(chip->dev, "Failed to add regulator subdev\n");
 			goto out;

drivers/regulator/88pm8607.c

@@ -398,32 +398,33 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
 {
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct pm8607_regulator_info *info = NULL;
-	struct regulator_init_data *pdata;
+	struct regulator_init_data *pdata = pdev->dev.platform_data;
+	struct resource *res;
 	int i;
 
-	pdata = pdev->dev.platform_data;
-	if (pdata == NULL)
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource!\n");
 		return -EINVAL;
-
+	}
 	for (i = 0; i < ARRAY_SIZE(pm8607_regulator_info); i++) {
 		info = &pm8607_regulator_info[i];
-		if (!strcmp(info->desc.name, pdata->constraints.name))
+		if (info->desc.id == res->start)
 			break;
 	}
-	if (i > ARRAY_SIZE(pm8607_regulator_info)) {
-		dev_err(&pdev->dev, "Failed to find regulator %s\n",
-			pdata->constraints.name);
+	if ((i < 0) || (i > PM8607_ID_RG_MAX)) {
+		dev_err(&pdev->dev, "Failed to find regulator %d\n",
+			res->start);
 		return -EINVAL;
 	}
-
 	info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
 	info->chip = chip;
 
 	/* check DVC ramp slope double */
-	if (!strcmp(info->desc.name, "BUCK3"))
-		if (info->chip->buck3_double)
+	if ((i == PM8607_ID_BUCK3) && info->chip->buck3_double)
 		info->slope_double = 1;
 
+	/* replace driver_data with info */
 	info->regulator = regulator_register(&info->desc, &pdev->dev,
 					     pdata, info);
 	if (IS_ERR(info->regulator)) {