Commit 5a3e3f88 authored by Grygorii Strashko's avatar Grygorii Strashko Committed by Linus Walleij

gpio: syscon: retrive syscon node and regs offsets from dt

This patch adds handling of new "gpio,syscon-dev" DT property,
which allows to specify syscon node and data/direction registers
offsets in DT.

"gpio,syscon-dev" has following format:
	gpio,syscon-dev = <&syscon_dev data_reg_offset [direction_reg_offset]>;

where
 - syscon_dev - phandle on syscon node
 - data_reg_offset - offset of data register (in bytes)
 - direction_reg_offset - offset of dirrection register (optional, in bytes)

for example:
	gpio,syscon-dev = <&devctrl 0x254>;

In such way, the support of multiple Syscon GPIO devices is added.
Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 2c341d62
...@@ -55,6 +55,8 @@ struct syscon_gpio_priv { ...@@ -55,6 +55,8 @@ struct syscon_gpio_priv {
struct gpio_chip chip; struct gpio_chip chip;
struct regmap *syscon; struct regmap *syscon;
const struct syscon_gpio_data *data; const struct syscon_gpio_data *data;
u32 dreg_offset;
u32 dir_reg_offset;
}; };
static inline struct syscon_gpio_priv *to_syscon_gpio(struct gpio_chip *chip) static inline struct syscon_gpio_priv *to_syscon_gpio(struct gpio_chip *chip)
...@@ -65,9 +67,11 @@ static inline struct syscon_gpio_priv *to_syscon_gpio(struct gpio_chip *chip) ...@@ -65,9 +67,11 @@ static inline struct syscon_gpio_priv *to_syscon_gpio(struct gpio_chip *chip)
static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset) static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset)
{ {
struct syscon_gpio_priv *priv = to_syscon_gpio(chip); struct syscon_gpio_priv *priv = to_syscon_gpio(chip);
unsigned int val, offs = priv->data->dat_bit_offset + offset; unsigned int val, offs;
int ret; int ret;
offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
ret = regmap_read(priv->syscon, ret = regmap_read(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, &val); (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, &val);
if (ret) if (ret)
...@@ -79,7 +83,9 @@ static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset) ...@@ -79,7 +83,9 @@ static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset)
static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val) static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{ {
struct syscon_gpio_priv *priv = to_syscon_gpio(chip); struct syscon_gpio_priv *priv = to_syscon_gpio(chip);
unsigned int offs = priv->data->dat_bit_offset + offset; unsigned int offs;
offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
regmap_update_bits(priv->syscon, regmap_update_bits(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
...@@ -92,7 +98,10 @@ static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset) ...@@ -92,7 +98,10 @@ static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
struct syscon_gpio_priv *priv = to_syscon_gpio(chip); struct syscon_gpio_priv *priv = to_syscon_gpio(chip);
if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) { if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
unsigned int offs = priv->data->dir_bit_offset + offset; unsigned int offs;
offs = priv->dir_reg_offset +
priv->data->dir_bit_offset + offset;
regmap_update_bits(priv->syscon, regmap_update_bits(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
...@@ -107,7 +116,10 @@ static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val) ...@@ -107,7 +116,10 @@ static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val)
struct syscon_gpio_priv *priv = to_syscon_gpio(chip); struct syscon_gpio_priv *priv = to_syscon_gpio(chip);
if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) { if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
unsigned int offs = priv->data->dir_bit_offset + offset; unsigned int offs;
offs = priv->dir_reg_offset +
priv->data->dir_bit_offset + offset;
regmap_update_bits(priv->syscon, regmap_update_bits(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
...@@ -142,6 +154,8 @@ static int syscon_gpio_probe(struct platform_device *pdev) ...@@ -142,6 +154,8 @@ static int syscon_gpio_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev; struct device *dev = &pdev->dev;
const struct of_device_id *of_id = of_match_device(syscon_gpio_ids, dev); const struct of_device_id *of_id = of_match_device(syscon_gpio_ids, dev);
struct syscon_gpio_priv *priv; struct syscon_gpio_priv *priv;
struct device_node *np = dev->of_node;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) if (!priv)
...@@ -149,11 +163,32 @@ static int syscon_gpio_probe(struct platform_device *pdev) ...@@ -149,11 +163,32 @@ static int syscon_gpio_probe(struct platform_device *pdev)
priv->data = of_id->data; priv->data = of_id->data;
if (priv->data->compatible) {
priv->syscon = syscon_regmap_lookup_by_compatible(
priv->data->compatible);
if (IS_ERR(priv->syscon))
return PTR_ERR(priv->syscon);
} else {
priv->syscon = priv->syscon =
syscon_regmap_lookup_by_compatible(priv->data->compatible); syscon_regmap_lookup_by_phandle(np, "gpio,syscon-dev");
if (IS_ERR(priv->syscon)) if (IS_ERR(priv->syscon))
return PTR_ERR(priv->syscon); return PTR_ERR(priv->syscon);
ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1,
&priv->dreg_offset);
if (ret)
dev_err(dev, "can't read the data register offset!\n");
priv->dreg_offset <<= 3;
ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
&priv->dir_reg_offset);
if (ret)
dev_err(dev, "can't read the dir register offset!\n");
priv->dir_reg_offset <<= 3;
}
priv->chip.dev = dev; priv->chip.dev = dev;
priv->chip.owner = THIS_MODULE; priv->chip.owner = THIS_MODULE;
priv->chip.label = dev_name(dev); priv->chip.label = dev_name(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment