Commit 5a992a9c authored by Tomasz Figa's avatar Tomasz Figa Committed by Kukjin Kim

ARM: dts: add dts files for exynos3250 SoC

This patch adds new exynos3250.dtsi to support Exynos3250 SoC
based on Cortex-A7 dual core and includes following dt nodes:

- GIC interrupt controller
- Pinctrl to control GPIOs
- Clock controller
- CPU information (Cortex-A7 dual core)
- UART to support serial port
- MCT (Multi Core Timer)
- ADC (Analog Digital Converter)
- I2C/SPI bus
- Power domain
- PMU (Performance Monitoring Unit)
- MSHC (Mobile Storage Host Controller)
- PWM (Pluse Width Modulation)
- AMBA bus
- sysram node for SYSRAM memory mapping
Signed-off-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
Signed-off-by: default avatarHyunhee Kim <hyunhee.kim@samsung.com>
Signed-off-by: default avatarJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: devicetree@vger.kernel.org
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent f82785a9
/*
* Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
* tree nodes are listed in this file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
&pinctrl_0 {
gpa0: gpa0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb: gpb {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc0: gpc0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <0x2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c3_bus: i2c3-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c4_bus: i2c4-bus {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c5_bus: i2c5-bus {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2s2_bus: i2s2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pcm2_bus: pcm2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c6_bus: i2c6-bus {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpd0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpd0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c7_bus: i2c7-bus {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
pwm2_out: pwm2-out {
samsung,pins = "gpd0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pwm3_out: pwm3-out {
samsung,pins = "gpd0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
mipi0_clk: mipi0-clk {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c1_bus: i2c1-bus {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
&pinctrl_1 {
gpe0: gpe0 {
gpio-controller;
#gpio-cells = <2>;
};
gpe1: gpe1 {
gpio-controller;
#gpio-cells = <2>;
};
gpe2: gpe2 {
gpio-controller;
#gpio-cells = <2>;
};
gpk0: gpk0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk1: gpk1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk2: gpk2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpl0: gpl0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpm0: gpm0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpm1: gpm1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpm2: gpm2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpm3: gpm3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpm4: gpm4 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpx0: gpx0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
#interrupt-cells = <2>;
};
gpx1: gpx1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
#interrupt-cells = <2>;
};
gpx2: gpx2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpx3: gpx3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd0_rdqs: sd0-rdqs {
samsung,pins = "gpk0-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpk1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpk1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpk1-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpk1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
cam_port_b_io: cam-port-b-io {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
cam_port_b_clk_active: cam-port-b-clk-active {
samsung,pins = "gpm2-2";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
cam_port_b_clk_idle: cam-port-b-clk-idle {
samsung,pins = "gpm2-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_i2c0: fimc-is-i2c0 {
samsung,pins = "gpm4-0", "gpm4-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_i2c1: fimc-is-i2c1 {
samsung,pins = "gpm4-2", "gpm4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_uart: fimc-is-uart {
samsung,pins = "gpm3-5", "gpm3-7";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
/*
* Samsung's Exynos3250 SoC device tree source
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
* based board files can include this file and provide values for board specfic
* bindings.
*
* Note: This file does not include device nodes for all the controllers in
* Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
* nodes can be added to this file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "skeleton.dtsi"
#include <dt-bindings/clock/exynos3250.h>
/ {
compatible = "samsung,exynos3250";
interrupt-parent = <&gic>;
aliases {
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
mshc0 = &mshc_0;
mshc1 = &mshc_1;
spi0 = &spi_0;
spi1 = &spi_1;
i2c0 = &i2c_0;
i2c1 = &i2c_1;
i2c2 = &i2c_2;
i2c3 = &i2c_3;
i2c4 = &i2c_4;
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0>;
clock-frequency = <1000000000>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <1>;
clock-frequency = <1000000000>;
};
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
fixed-rate-clocks {
#address-cells = <1>;
#size-cells = <0>;
xusbxti: clock@0 {
compatible = "fixed-clock";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
clock-frequency = <0>;
#clock-cells = <0>;
clock-output-names = "xusbxti";
};
xxti: clock@1 {
compatible = "fixed-clock";
reg = <1>;
clock-frequency = <0>;
#clock-cells = <0>;
clock-output-names = "xxti";
};
xtcxo: clock@2 {
compatible = "fixed-clock";
reg = <2>;
clock-frequency = <0>;
#clock-cells = <0>;
clock-output-names = "xtcxo";
};
};
sysram@02020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x40000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x02020000 0x40000>;
smp-sysram@0 {
compatible = "samsung,exynos4210-sysram";
reg = <0x0 0x1000>;
};
smp-sysram@3f000 {
compatible = "samsung,exynos4210-sysram-ns";
reg = <0x3f000 0x1000>;
};
};
chipid@10000000 {
compatible = "samsung,exynos4210-chipid";
reg = <0x10000000 0x100>;
};
sys_reg: syscon@10010000 {
compatible = "samsung,exynos3-sysreg", "syscon";
reg = <0x10010000 0x400>;
};
pd_cam: cam-power-domain@10023C00 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C00 0x20>;
};
pd_mfc: mfc-power-domain@10023C40 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C40 0x20>;
};
pd_g3d: g3d-power-domain@10023C60 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C60 0x20>;
};
pd_lcd0: lcd0-power-domain@10023C80 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C80 0x20>;
};
pd_isp: isp-power-domain@10023CA0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
};
cmu: clock-controller@10030000 {
compatible = "samsung,exynos3250-cmu";
reg = <0x10030000 0x20000>;
#clock-cells = <1>;
};
rtc: rtc@10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 73 0>, <0 74 0>;
status = "disabled";
};
gic: interrupt-controller@10481000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10481000 0x1000>,
<0x10482000 0x1000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
interrupts = <1 9 0xf04>;
};
mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
<0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
clock-names = "fin_pll", "mct";
};
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,exynos3250-pinctrl";
reg = <0x11000000 0x1000>;
interrupts = <0 225 0>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <0 48 0>;
};
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos3250-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <0 240 0>;
};
mshc_0: mshc@12510000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12510000 0x1000>;
interrupts = <0 142 0>;
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
mshc_1: mshc@12520000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12520000 0x1000>;
interrupts = <0 143 0>;
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
ranges;
pdma0: pdma@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 138 0>;
clocks = <&cmu CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 139 0>;
clocks = <&cmu CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
};
adc: adc@126C0000 {
compatible = "samsung,exynos-adc-v3";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
interrupts = <0 137 0>;
clock-names = "adc", "sclk_tsadc";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
io-channel-ranges;
status = "disabled";
};
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 109 0>;
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
serial_1: serial@13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 110 0>;
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
i2c_0: i2c@13860000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <0 113 0>;
clocks = <&cmu CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
status = "disabled";
};
i2c_1: i2c@13870000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <0 114 0>;
clocks = <&cmu CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
status = "disabled";
};
i2c_2: i2c@13880000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <0 115 0>;
clocks = <&cmu CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
status = "disabled";
};
i2c_3: i2c@13890000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <0 116 0>;
clocks = <&cmu CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
status = "disabled";
};
i2c_4: i2c@138A0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
interrupts = <0 117 0>;
clocks = <&cmu CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_bus>;
status = "disabled";
};
i2c_5: i2c@138B0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
interrupts = <0 118 0>;
clocks = <&cmu CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_bus>;
status = "disabled";
};
i2c_6: i2c@138C0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
interrupts = <0 119 0>;
clocks = <&cmu CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_bus>;
status = "disabled";
};
i2c_7: i2c@138D0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
interrupts = <0 120 0>;
clocks = <&cmu CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_bus>;
status = "disabled";
};
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
interrupts = <0 121 0>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
samsung,spi-src-clk = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
status = "disabled";
};
spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
interrupts = <0 122 0>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
samsung,spi-src-clk = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
status = "disabled";
};
pwm: pwm@139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
<0 107 0>, <0 108 0>;
#pwm-cells = <3>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <0 18 0>, <0 19 0>;
};
};
};
#include "exynos3250-pinctrl.dtsi"
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment