Skip to content

L
linux
Commit 5aad0db1 authored by Christian Ruppert's avatar Christian Ruppert Committed by Linus Walleij
Browse files
Options

pinctrl: add TB10x pin control driver 

The pinmux driver of the Abilis Systems TB10x platform based on ARC700 CPUs.
Used to control the pinmux and is a prerequisite for the GPIO driver.
Signed-off-by: default avatarChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: default avatarPierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 586a87e6
Hide whitespace changes
Inline Side-by-side
Showing with 971 additions and 0 deletions
Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt 0 → 100644
View file @ 5aad0db1
Abilis Systems TB10x pin controller
===================================
Required properties
-------------------
- compatible: should be "abilis,tb10x-iomux";
- reg: should contain the physical address and size of the pin controller's
register range.
Function definitions
--------------------
Functions are defined (and referenced) by sub-nodes of the pin controller.
Every sub-node defines exactly one function (implying a set of pins).
Every function is associated to one named pin group inside the pin controller
driver and these names are used to associate pin group predefinitions to pin
controller sub-nodes.
Required function definition subnode properties:
- abilis,function: should be set to the name of the function's pin group.
The following pin groups are available:
- GPIO ports: gpioa, gpiob, gpioc, gpiod, gpioe, gpiof, gpiog,
gpioh, gpioi, gpioj, gpiok, gpiol, gpiom, gpion
- Serial TS input ports: mis0, mis1, mis2, mis3, mis4, mis5, mis6, mis7
- Parallel TS input ports: mip1, mip3, mip5, mip7
- Serial TS output ports: mos0, mos1, mos2, mos3
- Parallel TS output port: mop
- CI+ port: ciplus
- CableCard (Mcard) port: mcard
- Smart card ports: stc0, stc1
- UART ports: uart0, uart1
- SPI ports: spi1, spi3
- JTAG: jtag
All other ports of the chip are not multiplexed and thus not managed by this
driver.
GPIO ranges definition
----------------------
The named pin groups of GPIO ports can be used to define GPIO ranges as
explained in Documentation/devicetree/bindings/gpio/gpio.txt.
Example
-------
iomux: iomux@FF10601c {
compatible = "abilis,tb10x-iomux";
reg = <0xFF10601c 0x4>;
pctl_gpio_a: pctl-gpio-a {
abilis,function = "gpioa";
};
pctl_uart0: pctl-uart0 {
abilis,function = "uart0";
};
};
uart@FF100000 {
compatible = "snps,dw-apb-uart";
reg = <0xFF100000 0x100>;
clock-frequency = <166666666>;
interrupts = <25 1>;
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
gpioa: gpio@FF140000 {
compatible = "abilis,tb10x-gpio";
reg = <0xFF140000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
ngpio = <3>;
gpio-ranges = <&iomux 0 0>;
gpio-ranges-group-names = "gpioa";
};
drivers/pinctrl/Kconfig
View file @ 5aad0db1
......@@ -321,6 +321,10 @@ config PINCTRL_XWAY
depends on SOC_TYPE_XWAY
depends on PINCTRL_LANTIQ
config PINCTRL_TB10X
bool
depends on ARC_PLAT_TB10X
endmenu
endif
drivers/pinctrl/Makefile
View file @ 5aad0db1
......@@ -56,6 +56,7 @@ obj-$(CONFIG_PINCTRL_S3C24XX) += pinctrl-s3c24xx.o
obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o
obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o
obj-$(CONFIG_PINCTRL_VF610) += pinctrl-vf610.o
......
drivers/pinctrl/pinctrl-tb10x.c 0 → 100644
View file @ 5aad0db1
/*
* Abilis Systems TB10x pin control driver
*
* Copyright (C) Abilis Systems 2012
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/stringify.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/slab.h>
#include "pinctrl-utils.h"
#define TB10X_PORT1 (0)
#define TB10X_PORT2 (16)
#define TB10X_PORT3 (32)
#define TB10X_PORT4 (48)
#define TB10X_PORT5 (128)
#define TB10X_PORT6 (64)
#define TB10X_PORT7 (80)
#define TB10X_PORT8 (96)
#define TB10X_PORT9 (112)
#define TB10X_GPIOS (256)
#define PCFG_PORT_BITWIDTH (2)
#define PCFG_PORT_MASK(PORT) \
(((1 << PCFG_PORT_BITWIDTH) - 1) << (PCFG_PORT_BITWIDTH * (PORT)))
static const struct pinctrl_pin_desc tb10x_pins[] = {
/* Port 1 */
PINCTRL_PIN(TB10X_PORT1 + 0, "MICLK_S0"),
PINCTRL_PIN(TB10X_PORT1 + 1, "MISTRT_S0"),
PINCTRL_PIN(TB10X_PORT1 + 2, "MIVAL_S0"),
PINCTRL_PIN(TB10X_PORT1 + 3, "MDI_S0"),
PINCTRL_PIN(TB10X_PORT1 + 4, "GPIOA0"),
PINCTRL_PIN(TB10X_PORT1 + 5, "GPIOA1"),
PINCTRL_PIN(TB10X_PORT1 + 6, "GPIOA2"),
PINCTRL_PIN(TB10X_PORT1 + 7, "MDI_S1"),
PINCTRL_PIN(TB10X_PORT1 + 8, "MIVAL_S1"),
PINCTRL_PIN(TB10X_PORT1 + 9, "MISTRT_S1"),
PINCTRL_PIN(TB10X_PORT1 + 10, "MICLK_S1"),
/* Port 2 */
PINCTRL_PIN(TB10X_PORT2 + 0, "MICLK_S2"),
PINCTRL_PIN(TB10X_PORT2 + 1, "MISTRT_S2"),
PINCTRL_PIN(TB10X_PORT2 + 2, "MIVAL_S2"),
PINCTRL_PIN(TB10X_PORT2 + 3, "MDI_S2"),
PINCTRL_PIN(TB10X_PORT2 + 4, "GPIOC0"),
PINCTRL_PIN(TB10X_PORT2 + 5, "GPIOC1"),
PINCTRL_PIN(TB10X_PORT2 + 6, "GPIOC2"),
PINCTRL_PIN(TB10X_PORT2 + 7, "MDI_S3"),
PINCTRL_PIN(TB10X_PORT2 + 8, "MIVAL_S3"),
PINCTRL_PIN(TB10X_PORT2 + 9, "MISTRT_S3"),
PINCTRL_PIN(TB10X_PORT2 + 10, "MICLK_S3"),
/* Port 3 */
PINCTRL_PIN(TB10X_PORT3 + 0, "MICLK_S4"),
PINCTRL_PIN(TB10X_PORT3 + 1, "MISTRT_S4"),
PINCTRL_PIN(TB10X_PORT3 + 2, "MIVAL_S4"),
PINCTRL_PIN(TB10X_PORT3 + 3, "MDI_S4"),
PINCTRL_PIN(TB10X_PORT3 + 4, "GPIOE0"),
PINCTRL_PIN(TB10X_PORT3 + 5, "GPIOE1"),
PINCTRL_PIN(TB10X_PORT3 + 6, "GPIOE2"),
PINCTRL_PIN(TB10X_PORT3 + 7, "MDI_S5"),
PINCTRL_PIN(TB10X_PORT3 + 8, "MIVAL_S5"),
PINCTRL_PIN(TB10X_PORT3 + 9, "MISTRT_S5"),
PINCTRL_PIN(TB10X_PORT3 + 10, "MICLK_S5"),
/* Port 4 */
PINCTRL_PIN(TB10X_PORT4 + 0, "MICLK_S6"),
PINCTRL_PIN(TB10X_PORT4 + 1, "MISTRT_S6"),
PINCTRL_PIN(TB10X_PORT4 + 2, "MIVAL_S6"),
PINCTRL_PIN(TB10X_PORT4 + 3, "MDI_S6"),
PINCTRL_PIN(TB10X_PORT4 + 4, "GPIOG0"),
PINCTRL_PIN(TB10X_PORT4 + 5, "GPIOG1"),
PINCTRL_PIN(TB10X_PORT4 + 6, "GPIOG2"),
PINCTRL_PIN(TB10X_PORT4 + 7, "MDI_S7"),
PINCTRL_PIN(TB10X_PORT4 + 8, "MIVAL_S7"),
PINCTRL_PIN(TB10X_PORT4 + 9, "MISTRT_S7"),
PINCTRL_PIN(TB10X_PORT4 + 10, "MICLK_S7"),
/* Port 5 */
PINCTRL_PIN(TB10X_PORT5 + 0, "PC_CE1N"),
PINCTRL_PIN(TB10X_PORT5 + 1, "PC_CE2N"),
PINCTRL_PIN(TB10X_PORT5 + 2, "PC_REGN"),
PINCTRL_PIN(TB10X_PORT5 + 3, "PC_INPACKN"),
PINCTRL_PIN(TB10X_PORT5 + 4, "PC_OEN"),
PINCTRL_PIN(TB10X_PORT5 + 5, "PC_WEN"),
PINCTRL_PIN(TB10X_PORT5 + 6, "PC_IORDN"),
PINCTRL_PIN(TB10X_PORT5 + 7, "PC_IOWRN"),
PINCTRL_PIN(TB10X_PORT5 + 8, "PC_RDYIRQN"),
PINCTRL_PIN(TB10X_PORT5 + 9, "PC_WAITN"),
PINCTRL_PIN(TB10X_PORT5 + 10, "PC_A0"),
PINCTRL_PIN(TB10X_PORT5 + 11, "PC_A1"),
PINCTRL_PIN(TB10X_PORT5 + 12, "PC_A2"),
PINCTRL_PIN(TB10X_PORT5 + 13, "PC_A3"),
PINCTRL_PIN(TB10X_PORT5 + 14, "PC_A4"),
PINCTRL_PIN(TB10X_PORT5 + 15, "PC_A5"),
PINCTRL_PIN(TB10X_PORT5 + 16, "PC_A6"),
PINCTRL_PIN(TB10X_PORT5 + 17, "PC_A7"),
PINCTRL_PIN(TB10X_PORT5 + 18, "PC_A8"),
PINCTRL_PIN(TB10X_PORT5 + 19, "PC_A9"),
PINCTRL_PIN(TB10X_PORT5 + 20, "PC_A10"),
PINCTRL_PIN(TB10X_PORT5 + 21, "PC_A11"),
PINCTRL_PIN(TB10X_PORT5 + 22, "PC_A12"),
PINCTRL_PIN(TB10X_PORT5 + 23, "PC_A13"),
PINCTRL_PIN(TB10X_PORT5 + 24, "PC_A14"),
PINCTRL_PIN(TB10X_PORT5 + 25, "PC_D0"),
PINCTRL_PIN(TB10X_PORT5 + 26, "PC_D1"),
PINCTRL_PIN(TB10X_PORT5 + 27, "PC_D2"),
PINCTRL_PIN(TB10X_PORT5 + 28, "PC_D3"),
PINCTRL_PIN(TB10X_PORT5 + 29, "PC_D4"),
PINCTRL_PIN(TB10X_PORT5 + 30, "PC_D5"),
PINCTRL_PIN(TB10X_PORT5 + 31, "PC_D6"),
PINCTRL_PIN(TB10X_PORT5 + 32, "PC_D7"),
PINCTRL_PIN(TB10X_PORT5 + 33, "PC_MOSTRT"),
PINCTRL_PIN(TB10X_PORT5 + 34, "PC_MOVAL"),
PINCTRL_PIN(TB10X_PORT5 + 35, "PC_MDO0"),
PINCTRL_PIN(TB10X_PORT5 + 36, "PC_MDO1"),
PINCTRL_PIN(TB10X_PORT5 + 37, "PC_MDO2"),
PINCTRL_PIN(TB10X_PORT5 + 38, "PC_MDO3"),
PINCTRL_PIN(TB10X_PORT5 + 39, "PC_MDO4"),
PINCTRL_PIN(TB10X_PORT5 + 40, "PC_MDO5"),
PINCTRL_PIN(TB10X_PORT5 + 41, "PC_MDO6"),
PINCTRL_PIN(TB10X_PORT5 + 42, "PC_MDO7"),
PINCTRL_PIN(TB10X_PORT5 + 43, "PC_MISTRT"),
PINCTRL_PIN(TB10X_PORT5 + 44, "PC_MIVAL"),
PINCTRL_PIN(TB10X_PORT5 + 45, "PC_MDI0"),
PINCTRL_PIN(TB10X_PORT5 + 46, "PC_MDI1"),
PINCTRL_PIN(TB10X_PORT5 + 47, "PC_MDI2"),
PINCTRL_PIN(TB10X_PORT5 + 48, "PC_MDI3"),
PINCTRL_PIN(TB10X_PORT5 + 49, "PC_MDI4"),
PINCTRL_PIN(TB10X_PORT5 + 50, "PC_MDI5"),
PINCTRL_PIN(TB10X_PORT5 + 51, "PC_MDI6"),
PINCTRL_PIN(TB10X_PORT5 + 52, "PC_MDI7"),
PINCTRL_PIN(TB10X_PORT5 + 53, "PC_MICLK"),
/* Port 6 */
PINCTRL_PIN(TB10X_PORT6 + 0, "T_MOSTRT_S0"),
PINCTRL_PIN(TB10X_PORT6 + 1, "T_MOVAL_S0"),
PINCTRL_PIN(TB10X_PORT6 + 2, "T_MDO_S0"),
PINCTRL_PIN(TB10X_PORT6 + 3, "T_MOSTRT_S1"),
PINCTRL_PIN(TB10X_PORT6 + 4, "T_MOVAL_S1"),
PINCTRL_PIN(TB10X_PORT6 + 5, "T_MDO_S1"),
PINCTRL_PIN(TB10X_PORT6 + 6, "T_MOSTRT_S2"),
PINCTRL_PIN(TB10X_PORT6 + 7, "T_MOVAL_S2"),
PINCTRL_PIN(TB10X_PORT6 + 8, "T_MDO_S2"),
PINCTRL_PIN(TB10X_PORT6 + 9, "T_MOSTRT_S3"),
/* Port 7 */
PINCTRL_PIN(TB10X_PORT7 + 0, "UART0_TXD"),
PINCTRL_PIN(TB10X_PORT7 + 1, "UART0_RXD"),
PINCTRL_PIN(TB10X_PORT7 + 2, "UART0_CTS"),
PINCTRL_PIN(TB10X_PORT7 + 3, "UART0_RTS"),
PINCTRL_PIN(TB10X_PORT7 + 4, "UART1_TXD"),
PINCTRL_PIN(TB10X_PORT7 + 5, "UART1_RXD"),
PINCTRL_PIN(TB10X_PORT7 + 6, "UART1_CTS"),
PINCTRL_PIN(TB10X_PORT7 + 7, "UART1_RTS"),
/* Port 8 */
PINCTRL_PIN(TB10X_PORT8 + 0, "SPI3_CLK"),
PINCTRL_PIN(TB10X_PORT8 + 1, "SPI3_MISO"),
PINCTRL_PIN(TB10X_PORT8 + 2, "SPI3_MOSI"),
PINCTRL_PIN(TB10X_PORT8 + 3, "SPI3_SSN"),
/* Port 9 */
PINCTRL_PIN(TB10X_PORT9 + 0, "SPI1_CLK"),
PINCTRL_PIN(TB10X_PORT9 + 1, "SPI1_MISO"),
PINCTRL_PIN(TB10X_PORT9 + 2, "SPI1_MOSI"),
PINCTRL_PIN(TB10X_PORT9 + 3, "SPI1_SSN0"),
PINCTRL_PIN(TB10X_PORT9 + 4, "SPI1_SSN1"),
/* Unmuxed GPIOs */
PINCTRL_PIN(TB10X_GPIOS + 0, "GPIOB0"),
PINCTRL_PIN(TB10X_GPIOS + 1, "GPIOB1"),
PINCTRL_PIN(TB10X_GPIOS + 2, "GPIOD0"),
PINCTRL_PIN(TB10X_GPIOS + 3, "GPIOD1"),
PINCTRL_PIN(TB10X_GPIOS + 4, "GPIOF0"),
PINCTRL_PIN(TB10X_GPIOS + 5, "GPIOF1"),
PINCTRL_PIN(TB10X_GPIOS + 6, "GPIOH0"),
PINCTRL_PIN(TB10X_GPIOS + 7, "GPIOH1"),
PINCTRL_PIN(TB10X_GPIOS + 8, "GPIOI0"),
PINCTRL_PIN(TB10X_GPIOS + 9, "GPIOI1"),
PINCTRL_PIN(TB10X_GPIOS + 10, "GPIOI2"),
PINCTRL_PIN(TB10X_GPIOS + 11, "GPIOI3"),
PINCTRL_PIN(TB10X_GPIOS + 12, "GPIOI4"),
PINCTRL_PIN(TB10X_GPIOS + 13, "GPIOI5"),
PINCTRL_PIN(TB10X_GPIOS + 14, "GPIOI6"),
PINCTRL_PIN(TB10X_GPIOS + 15, "GPIOI7"),
PINCTRL_PIN(TB10X_GPIOS + 16, "GPIOI8"),
PINCTRL_PIN(TB10X_GPIOS + 17, "GPIOI9"),
PINCTRL_PIN(TB10X_GPIOS + 18, "GPIOI10"),
PINCTRL_PIN(TB10X_GPIOS + 19, "GPIOI11"),
PINCTRL_PIN(TB10X_GPIOS + 20, "GPION0"),
PINCTRL_PIN(TB10X_GPIOS + 21, "GPION1"),
PINCTRL_PIN(TB10X_GPIOS + 22, "GPION2"),
PINCTRL_PIN(TB10X_GPIOS + 23, "GPION3"),
#define MAX_PIN (TB10X_GPIOS + 24)
PINCTRL_PIN(MAX_PIN, "GPION4"),
};
/* Port 1 */
static const unsigned mis0_pins[] = { TB10X_PORT1 + 0, TB10X_PORT1 + 1,
TB10X_PORT1 + 2, TB10X_PORT1 + 3};
static const unsigned gpioa_pins[] = { TB10X_PORT1 + 4, TB10X_PORT1 + 5,
TB10X_PORT1 + 6};
static const unsigned mis1_pins[] = { TB10X_PORT1 + 7, TB10X_PORT1 + 8,
TB10X_PORT1 + 9, TB10X_PORT1 + 10};
static const unsigned mip1_pins[] = { TB10X_PORT1 + 0, TB10X_PORT1 + 1,
TB10X_PORT1 + 2, TB10X_PORT1 + 3,
TB10X_PORT1 + 4, TB10X_PORT1 + 5,
TB10X_PORT1 + 6, TB10X_PORT1 + 7,
TB10X_PORT1 + 8, TB10X_PORT1 + 9,
TB10X_PORT1 + 10};
/* Port 2 */
static const unsigned mis2_pins[] = { TB10X_PORT2 + 0, TB10X_PORT2 + 1,
TB10X_PORT2 + 2, TB10X_PORT2 + 3};
static const unsigned gpioc_pins[] = { TB10X_PORT2 + 4, TB10X_PORT2 + 5,
TB10X_PORT2 + 6};
static const unsigned mis3_pins[] = { TB10X_PORT2 + 7, TB10X_PORT2 + 8,
TB10X_PORT2 + 9, TB10X_PORT2 + 10};
static const unsigned mip3_pins[] = { TB10X_PORT2 + 0, TB10X_PORT2 + 1,
TB10X_PORT2 + 2, TB10X_PORT2 + 3,
TB10X_PORT2 + 4, TB10X_PORT2 + 5,
TB10X_PORT2 + 6, TB10X_PORT2 + 7,
TB10X_PORT2 + 8, TB10X_PORT2 + 9,
TB10X_PORT2 + 10};
/* Port 3 */
static const unsigned mis4_pins[] = { TB10X_PORT3 + 0, TB10X_PORT3 + 1,
TB10X_PORT3 + 2, TB10X_PORT3 + 3};
static const unsigned gpioe_pins[] = { TB10X_PORT3 + 4, TB10X_PORT3 + 5,
TB10X_PORT3 + 6};
static const unsigned mis5_pins[] = { TB10X_PORT3 + 7, TB10X_PORT3 + 8,
TB10X_PORT3 + 9, TB10X_PORT3 + 10};
static const unsigned mip5_pins[] = { TB10X_PORT3 + 0, TB10X_PORT3 + 1,
TB10X_PORT3 + 2, TB10X_PORT3 + 3,
TB10X_PORT3 + 4, TB10X_PORT3 + 5,
TB10X_PORT3 + 6, TB10X_PORT3 + 7,
TB10X_PORT3 + 8, TB10X_PORT3 + 9,
TB10X_PORT3 + 10};
/* Port 4 */
static const unsigned mis6_pins[] = { TB10X_PORT4 + 0, TB10X_PORT4 + 1,
TB10X_PORT4 + 2, TB10X_PORT4 + 3};
static const unsigned gpiog_pins[] = { TB10X_PORT4 + 4, TB10X_PORT4 + 5,
TB10X_PORT4 + 6};
static const unsigned mis7_pins[] = { TB10X_PORT4 + 7, TB10X_PORT4 + 8,
TB10X_PORT4 + 9, TB10X_PORT4 + 10};
static const unsigned mip7_pins[] = { TB10X_PORT4 + 0, TB10X_PORT4 + 1,
TB10X_PORT4 + 2, TB10X_PORT4 + 3,
TB10X_PORT4 + 4, TB10X_PORT4 + 5,
TB10X_PORT4 + 6, TB10X_PORT4 + 7,
TB10X_PORT4 + 8, TB10X_PORT4 + 9,
TB10X_PORT4 + 10};
/* Port 6 */
static const unsigned mop_pins[] = { TB10X_PORT6 + 0, TB10X_PORT6 + 1,
TB10X_PORT6 + 2, TB10X_PORT6 + 3,
TB10X_PORT6 + 4, TB10X_PORT6 + 5,
TB10X_PORT6 + 6, TB10X_PORT6 + 7,
TB10X_PORT6 + 8, TB10X_PORT6 + 9};
static const unsigned mos0_pins[] = { TB10X_PORT6 + 0, TB10X_PORT6 + 1,
TB10X_PORT6 + 2};
static const unsigned mos1_pins[] = { TB10X_PORT6 + 3, TB10X_PORT6 + 4,
TB10X_PORT6 + 5};
static const unsigned mos2_pins[] = { TB10X_PORT6 + 6, TB10X_PORT6 + 7,
TB10X_PORT6 + 8};
static const unsigned mos3_pins[] = { TB10X_PORT6 + 9};
/* Port 7 */
static const unsigned uart0_pins[] = { TB10X_PORT7 + 0, TB10X_PORT7 + 1,
TB10X_PORT7 + 2, TB10X_PORT7 + 3};
static const unsigned uart1_pins[] = { TB10X_PORT7 + 4, TB10X_PORT7 + 5,
TB10X_PORT7 + 6, TB10X_PORT7 + 7};
static const unsigned gpiol_pins[] = { TB10X_PORT7 + 0, TB10X_PORT7 + 1,
TB10X_PORT7 + 2, TB10X_PORT7 + 3};
static const unsigned gpiom_pins[] = { TB10X_PORT7 + 4, TB10X_PORT7 + 5,
TB10X_PORT7 + 6, TB10X_PORT7 + 7};
/* Port 8 */
static const unsigned spi3_pins[] = { TB10X_PORT8 + 0, TB10X_PORT8 + 1,
TB10X_PORT8 + 2, TB10X_PORT8 + 3};
static const unsigned jtag_pins[] = { TB10X_PORT8 + 0, TB10X_PORT8 + 1,
TB10X_PORT8 + 2, TB10X_PORT8 + 3};
/* Port 9 */
static const unsigned spi1_pins[] = { TB10X_PORT9 + 0, TB10X_PORT9 + 1,
TB10X_PORT9 + 2, TB10X_PORT9 + 3,
TB10X_PORT9 + 4};
static const unsigned gpion_pins[] = { TB10X_PORT9 + 0, TB10X_PORT9 + 1,
TB10X_PORT9 + 2, TB10X_PORT9 + 3,
TB10X_PORT9 + 4};
/* Port 5 */
static const unsigned gpioj_pins[] = { TB10X_PORT5 + 0, TB10X_PORT5 + 1,
TB10X_PORT5 + 2, TB10X_PORT5 + 3,
TB10X_PORT5 + 4, TB10X_PORT5 + 5,
TB10X_PORT5 + 6, TB10X_PORT5 + 7,
TB10X_PORT5 + 8, TB10X_PORT5 + 9,
TB10X_PORT5 + 10, TB10X_PORT5 + 11,
TB10X_PORT5 + 12, TB10X_PORT5 + 13,
TB10X_PORT5 + 14, TB10X_PORT5 + 15,
TB10X_PORT5 + 16, TB10X_PORT5 + 17,
TB10X_PORT5 + 18, TB10X_PORT5 + 19,
TB10X_PORT5 + 20, TB10X_PORT5 + 21,
TB10X_PORT5 + 22, TB10X_PORT5 + 23,
TB10X_PORT5 + 24, TB10X_PORT5 + 25,
TB10X_PORT5 + 26, TB10X_PORT5 + 27,
TB10X_PORT5 + 28, TB10X_PORT5 + 29,
TB10X_PORT5 + 30, TB10X_PORT5 + 31};
static const unsigned gpiok_pins[] = { TB10X_PORT5 + 32, TB10X_PORT5 + 33,
TB10X_PORT5 + 34, TB10X_PORT5 + 35,
TB10X_PORT5 + 36, TB10X_PORT5 + 37,
TB10X_PORT5 + 38, TB10X_PORT5 + 39,
TB10X_PORT5 + 40, TB10X_PORT5 + 41,
TB10X_PORT5 + 42, TB10X_PORT5 + 43,
TB10X_PORT5 + 44, TB10X_PORT5 + 45,
TB10X_PORT5 + 46, TB10X_PORT5 + 47,
TB10X_PORT5 + 48, TB10X_PORT5 + 49,
TB10X_PORT5 + 50, TB10X_PORT5 + 51,
TB10X_PORT5 + 52, TB10X_PORT5 + 53};
static const unsigned ciplus_pins[] = { TB10X_PORT5 + 0, TB10X_PORT5 + 1,
TB10X_PORT5 + 2, TB10X_PORT5 + 3,
TB10X_PORT5 + 4, TB10X_PORT5 + 5,
TB10X_PORT5 + 6, TB10X_PORT5 + 7,
TB10X_PORT5 + 8, TB10X_PORT5 + 9,
TB10X_PORT5 + 10, TB10X_PORT5 + 11,
TB10X_PORT5 + 12, TB10X_PORT5 + 13,
TB10X_PORT5 + 14, TB10X_PORT5 + 15,
TB10X_PORT5 + 16, TB10X_PORT5 + 17,
TB10X_PORT5 + 18, TB10X_PORT5 + 19,
TB10X_PORT5 + 20, TB10X_PORT5 + 21,
TB10X_PORT5 + 22, TB10X_PORT5 + 23,
TB10X_PORT5 + 24, TB10X_PORT5 + 25,
TB10X_PORT5 + 26, TB10X_PORT5 + 27,
TB10X_PORT5 + 28, TB10X_PORT5 + 29,
TB10X_PORT5 + 30, TB10X_PORT5 + 31,
TB10X_PORT5 + 32, TB10X_PORT5 + 33,
TB10X_PORT5 + 34, TB10X_PORT5 + 35,
TB10X_PORT5 + 36, TB10X_PORT5 + 37,
TB10X_PORT5 + 38, TB10X_PORT5 + 39,
TB10X_PORT5 + 40, TB10X_PORT5 + 41,
TB10X_PORT5 + 42, TB10X_PORT5 + 43,
TB10X_PORT5 + 44, TB10X_PORT5 + 45,
TB10X_PORT5 + 46, TB10X_PORT5 + 47,
TB10X_PORT5 + 48, TB10X_PORT5 + 49,
TB10X_PORT5 + 50, TB10X_PORT5 + 51,
TB10X_PORT5 + 52, TB10X_PORT5 + 53};
static const unsigned mcard_pins[] = { TB10X_PORT5 + 3, TB10X_PORT5 + 10,
TB10X_PORT5 + 11, TB10X_PORT5 + 12,
TB10X_PORT5 + 22, TB10X_PORT5 + 23,
TB10X_PORT5 + 33, TB10X_PORT5 + 35,
TB10X_PORT5 + 36, TB10X_PORT5 + 37,
TB10X_PORT5 + 38, TB10X_PORT5 + 39,
TB10X_PORT5 + 40, TB10X_PORT5 + 41,
TB10X_PORT5 + 42, TB10X_PORT5 + 43,
TB10X_PORT5 + 45, TB10X_PORT5 + 46,
TB10X_PORT5 + 47, TB10X_PORT5 + 48,
TB10X_PORT5 + 49, TB10X_PORT5 + 50,
TB10X_PORT5 + 51, TB10X_PORT5 + 52,
TB10X_PORT5 + 53};
static const unsigned stc0_pins[] = { TB10X_PORT5 + 34, TB10X_PORT5 + 35,
TB10X_PORT5 + 36, TB10X_PORT5 + 37,
TB10X_PORT5 + 38, TB10X_PORT5 + 39,
TB10X_PORT5 + 40};
static const unsigned stc1_pins[] = { TB10X_PORT5 + 25, TB10X_PORT5 + 26,
TB10X_PORT5 + 27, TB10X_PORT5 + 28,
TB10X_PORT5 + 29, TB10X_PORT5 + 30,
TB10X_PORT5 + 44};
/* Unmuxed GPIOs */
static const unsigned gpiob_pins[] = { TB10X_GPIOS + 0, TB10X_GPIOS + 1};
static const unsigned gpiod_pins[] = { TB10X_GPIOS + 2, TB10X_GPIOS + 3};
static const unsigned gpiof_pins[] = { TB10X_GPIOS + 4, TB10X_GPIOS + 5};
static const unsigned gpioh_pins[] = { TB10X_GPIOS + 6, TB10X_GPIOS + 7};
static const unsigned gpioi_pins[] = { TB10X_GPIOS + 8, TB10X_GPIOS + 9,
TB10X_GPIOS + 10, TB10X_GPIOS + 11,
TB10X_GPIOS + 12, TB10X_GPIOS + 13,
TB10X_GPIOS + 14, TB10X_GPIOS + 15,
TB10X_GPIOS + 16, TB10X_GPIOS + 17,
TB10X_GPIOS + 18, TB10X_GPIOS + 19};
struct tb10x_pinfuncgrp {
const char *name;
const unsigned int *pins;
const unsigned int pincnt;
const int port;
const unsigned int mode;
const int isgpio;
};
#define DEFPINFUNCGRP(NAME, PORT, MODE, ISGPIO) { \
.name = __stringify(NAME), \
.pins = NAME##_pins, .pincnt = ARRAY_SIZE(NAME##_pins), \
.port = (PORT), .mode = (MODE), \
.isgpio = (ISGPIO), \
}
static const struct tb10x_pinfuncgrp tb10x_pingroups[] = {
DEFPINFUNCGRP(mis0, 0, 0, 0),
DEFPINFUNCGRP(gpioa, 0, 0, 1),
DEFPINFUNCGRP(mis1, 0, 0, 0),
DEFPINFUNCGRP(mip1, 0, 1, 0),
DEFPINFUNCGRP(mis2, 1, 0, 0),
DEFPINFUNCGRP(gpioc, 1, 0, 1),
DEFPINFUNCGRP(mis3, 1, 0, 0),
DEFPINFUNCGRP(mip3, 1, 1, 0),
DEFPINFUNCGRP(mis4, 2, 0, 0),
DEFPINFUNCGRP(gpioe, 2, 0, 1),
DEFPINFUNCGRP(mis5, 2, 0, 0),
DEFPINFUNCGRP(mip5, 2, 1, 0),
DEFPINFUNCGRP(mis6, 3, 0, 0),
DEFPINFUNCGRP(gpiog, 3, 0, 1),
DEFPINFUNCGRP(mis7, 3, 0, 0),
DEFPINFUNCGRP(mip7, 3, 1, 0),
DEFPINFUNCGRP(gpioj, 4, 0, 1),
DEFPINFUNCGRP(gpiok, 4, 0, 1),
DEFPINFUNCGRP(ciplus, 4, 1, 0),
DEFPINFUNCGRP(mcard, 4, 2, 0),
DEFPINFUNCGRP(stc0, 4, 3, 0),
DEFPINFUNCGRP(stc1, 4, 3, 0),
DEFPINFUNCGRP(mop, 5, 0, 0),
DEFPINFUNCGRP(mos0, 5, 1, 0),
DEFPINFUNCGRP(mos1, 5, 1, 0),
DEFPINFUNCGRP(mos2, 5, 1, 0),
DEFPINFUNCGRP(mos3, 5, 1, 0),
DEFPINFUNCGRP(uart0, 6, 0, 0),
DEFPINFUNCGRP(uart1, 6, 0, 0),
DEFPINFUNCGRP(gpiol, 6, 1, 1),
DEFPINFUNCGRP(gpiom, 6, 1, 1),
DEFPINFUNCGRP(spi3, 7, 0, 0),
DEFPINFUNCGRP(jtag, 7, 1, 0),
DEFPINFUNCGRP(spi1, 8, 0, 0),
DEFPINFUNCGRP(gpion, 8, 1, 1),
DEFPINFUNCGRP(gpiob, -1, 0, 1),
DEFPINFUNCGRP(gpiod, -1, 0, 1),
DEFPINFUNCGRP(gpiof, -1, 0, 1),
DEFPINFUNCGRP(gpioh, -1, 0, 1),
DEFPINFUNCGRP(gpioi, -1, 0, 1),
};
#undef DEFPINFUNCGRP
struct tb10x_of_pinfunc {
const char *name;
const char *group;
};
#define TB10X_PORTS (9)
/**
* struct tb10x_port - state of an I/O port
* @mode: Node this port is currently in.
* @count: Number of enabled functions which require this port to be
* configured in @mode.
*/
struct tb10x_port {
unsigned int mode;
unsigned int count;
};
/**
* struct tb10x_pinctrl - TB10x pin controller internal state
* @pctl: pointer to the pinctrl_dev structure of this pin controller.
* @base: register set base address.
* @pingroups: pointer to an array of the pin groups this driver manages.
* @pinfuncgrpcnt: number of pingroups in @pingroups.
* @pinfuncs: pointer to an array of pin functions this driver manages.
* @pinfuncnt: number of pin functions in @pinfuncs.
* @mutex: mutex for exclusive access to a pin controller's state.
* @ports: current state of each port.
* @gpios: Indicates if a given pin is currently used as GPIO (1) or not (0).
*/
struct tb10x_pinctrl {
struct pinctrl_dev *pctl;
void *base;
const struct tb10x_pinfuncgrp *pingroups;
unsigned int pinfuncgrpcnt;
struct tb10x_of_pinfunc *pinfuncs;
unsigned int pinfuncnt;
struct mutex mutex;
struct tb10x_port ports[TB10X_PORTS];
DECLARE_BITMAP(gpios, MAX_PIN + 1);
};
static inline void tb10x_pinctrl_set_config(struct tb10x_pinctrl *state,
unsigned int port, unsigned int mode)
{
u32 pcfg;
if (state->ports[port].count)
return;
state->ports[port].mode = mode;
pcfg = ioread32(state->base) & ~(PCFG_PORT_MASK(port));
pcfg |= (mode << (PCFG_PORT_BITWIDTH * port)) & PCFG_PORT_MASK(port);
iowrite32(pcfg, state->base);
}
static inline unsigned int tb10x_pinctrl_get_config(
struct tb10x_pinctrl *state,
unsigned int port)
{
return (ioread32(state->base) & PCFG_PORT_MASK(port))
>> (PCFG_PORT_BITWIDTH * port);
}
static int tb10x_get_groups_count(struct pinctrl_dev *pctl)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
return state->pinfuncgrpcnt;
}
static const char *tb10x_get_group_name(struct pinctrl_dev *pctl, unsigned n)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
return state->pingroups[n].name;
}
static int tb10x_get_group_pins(struct pinctrl_dev *pctl, unsigned n,
unsigned const **pins,
unsigned * const num_pins)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
*pins = state->pingroups[n].pins;
*num_pins = state->pingroups[n].pincnt;
return 0;
}
static int tb10x_dt_node_to_map(struct pinctrl_dev *pctl,
struct device_node *np_config,
struct pinctrl_map **map, unsigned *num_maps)
{
const char *string;
unsigned reserved_maps = 0;
int ret = 0;
if (of_property_read_string(np_config, "abilis,function", &string)) {
pr_err("%s: No abilis,function property in device tree.\n",
np_config->full_name);
return -EINVAL;
}
*map = NULL;
*num_maps = 0;
ret = pinctrl_utils_reserve_map(pctl, map, &reserved_maps,
num_maps, 1);
if (ret)
goto out;
ret = pinctrl_utils_add_map_mux(pctl, map, &reserved_maps,
num_maps, string, np_config->name);
out:
return ret;
}
static struct pinctrl_ops tb10x_pinctrl_ops = {
.get_groups_count = tb10x_get_groups_count,
.get_group_name = tb10x_get_group_name,
.get_group_pins = tb10x_get_group_pins,
.dt_node_to_map = tb10x_dt_node_to_map,
.dt_free_map = pinctrl_utils_dt_free_map,
};
static int tb10x_get_functions_count(struct pinctrl_dev *pctl)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
return state->pinfuncnt;
}
static const char *tb10x_get_function_name(struct pinctrl_dev *pctl,
unsigned n)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
return state->pinfuncs[n].name;
}
static int tb10x_get_function_groups(struct pinctrl_dev *pctl,
unsigned n, const char * const **groups,
unsigned * const num_groups)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
*groups = &state->pinfuncs[n].group;
*num_groups = 1;
return 0;
}
static int tb10x_gpio_request_enable(struct pinctrl_dev *pctl,
struct pinctrl_gpio_range *range,
unsigned pin)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
int muxport = -1;
int muxmode = -1;
int i;
mutex_lock(&state->mutex);
/*
* Figure out to which port the requested GPIO belongs and how to
* configure that port.
* This loop also checks for pin conflicts between GPIOs and other
* functions.
*/
for (i = 0; i < state->pinfuncgrpcnt; i++) {
const struct tb10x_pinfuncgrp *pfg = &state->pingroups[i];
unsigned int port = pfg->port;
unsigned int mode = pfg->mode;
int j;
/*
* Skip pin groups which are always mapped and don't need
* to be configured.
*/
if (port < 0)
continue;
for (j = 0; j < pfg->pincnt; j++) {
if (pin == pfg->pins[j]) {
if (pfg->isgpio) {
/*
* Remember the GPIO-only setting of
* the port this pin belongs to.
*/
muxport = port;
muxmode = mode;
} else if (state->ports[port].count
&& (state->ports[port].mode == mode)) {
/*
* Error: The requested pin is already
* used for something else.
*/
mutex_unlock(&state->mutex);
return -EBUSY;
}
break;
}
}
}
/*
* If we haven't returned an error at this point, the GPIO pin is not
* used by another function and the GPIO request can be granted:
* Register pin as being used as GPIO so we don't allocate it to
* another function later.
*/
set_bit(pin, state->gpios);
/*
* Potential conflicts between GPIOs and pin functions were caught
* earlier in this function and tb10x_pinctrl_set_config will do the
* Right Thing, either configure the port in GPIO only mode or leave
* another mode compatible with this GPIO request untouched.
*/
if (muxport >= 0)
tb10x_pinctrl_set_config(state, muxport, muxmode);
mutex_unlock(&state->mutex);
return 0;
}
static void tb10x_gpio_disable_free(struct pinctrl_dev *pctl,
struct pinctrl_gpio_range *range,
unsigned pin)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
mutex_lock(&state->mutex);
clear_bit(pin, state->gpios);
mutex_unlock(&state->mutex);
}
static int tb10x_pctl_enable(struct pinctrl_dev *pctl,
unsigned func_selector, unsigned group_selector)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
const struct tb10x_pinfuncgrp *grp = &state->pingroups[group_selector];
int i;
if (grp->port < 0)
return 0;
mutex_lock(&state->mutex);
/*
* Check if the requested function is compatible with previously
* requested functions.
*/
if (state->ports[grp->port].count
&& (state->ports[grp->port].mode != grp->mode)) {
mutex_unlock(&state->mutex);
return -EBUSY;
}
/*
* Check if the requested function is compatible with previously
* requested GPIOs.
*/
for (i = 0; i < grp->pincnt; i++)
if (test_bit(grp->pins[i], state->gpios)) {
mutex_unlock(&state->mutex);
return -EBUSY;
}
tb10x_pinctrl_set_config(state, grp->port, grp->mode);
state->ports[grp->port].count++;
mutex_unlock(&state->mutex);
return 0;
}
static void tb10x_pctl_disable(struct pinctrl_dev *pctl,
unsigned func_selector, unsigned group_selector)
{
struct tb10x_pinctrl *state = pinctrl_dev_get_drvdata(pctl);
const struct tb10x_pinfuncgrp *grp = &state->pingroups[group_selector];
if (grp->port < 0)
return;
mutex_lock(&state->mutex);
state->ports[grp->port].count--;
mutex_unlock(&state->mutex);
}
static struct pinmux_ops tb10x_pinmux_ops = {
.get_functions_count = tb10x_get_functions_count,
.get_function_name = tb10x_get_function_name,
.get_function_groups = tb10x_get_function_groups,
.gpio_request_enable = tb10x_gpio_request_enable,
.gpio_disable_free = tb10x_gpio_disable_free,
.enable = tb10x_pctl_enable,
.disable = tb10x_pctl_disable,
};
static struct pinctrl_desc tb10x_pindesc = {
.name = "TB10x",
.pins = tb10x_pins,
.npins = ARRAY_SIZE(tb10x_pins),
.owner = THIS_MODULE,
.pctlops = &tb10x_pinctrl_ops,
.pmxops = &tb10x_pinmux_ops,
};
static int tb10x_pinctrl_probe(struct platform_device *pdev)
{
int ret = -EINVAL;
struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct device *dev = &pdev->dev;
struct device_node *of_node = dev->of_node;
struct device_node *child;
struct tb10x_pinctrl *state;
int i;
if (!of_node) {
dev_err(dev, "No device tree node found.\n");
return -EINVAL;
}
if (!mem) {
dev_err(dev, "No memory resource defined.\n");
return -EINVAL;
}
state = devm_kzalloc(dev, sizeof(struct tb10x_pinctrl) +
of_get_child_count(of_node)
* sizeof(struct tb10x_of_pinfunc),
GFP_KERNEL);
if (!state)
return -ENOMEM;
platform_set_drvdata(pdev, state);
state->pinfuncs = (struct tb10x_of_pinfunc *)(state + 1);
mutex_init(&state->mutex);
state->base = devm_ioremap_resource(dev, mem);
if (!state->base) {
dev_err(dev, "Request register region failed.\n");
ret = -EBUSY;
goto fail;
}
state->pingroups = tb10x_pingroups;
state->pinfuncgrpcnt = ARRAY_SIZE(tb10x_pingroups);
for (i = 0; i < TB10X_PORTS; i++)
state->ports[i].mode = tb10x_pinctrl_get_config(state, i);
for_each_child_of_node(of_node, child) {
const char *name;
if (!of_property_read_string(child, "abilis,function",
&name)) {
state->pinfuncs[state->pinfuncnt].name = child->name;
state->pinfuncs[state->pinfuncnt].group = name;
state->pinfuncnt++;
}
}
state->pctl = pinctrl_register(&tb10x_pindesc, dev, state);
if (IS_ERR(state->pctl)) {
dev_err(dev, "could not register TB10x pin driver\n");
ret = PTR_ERR(state->pctl);
goto fail;
}
return 0;
fail:
mutex_destroy(&state->mutex);
return ret;
}
static int tb10x_pinctrl_remove(struct platform_device *pdev)
{
struct tb10x_pinctrl *state = platform_get_drvdata(pdev);
pinctrl_unregister(state->pctl);
mutex_destroy(&state->mutex);
return 0;
}
static const struct of_device_id tb10x_pinctrl_dt_ids[] = {
{ .compatible = "abilis,tb10x-iomux" },
{ }
};
MODULE_DEVICE_TABLE(of, tb10x_pinctrl_dt_ids);
static struct platform_driver tb10x_pinctrl_pdrv = {
.probe = tb10x_pinctrl_probe,
.remove = tb10x_pinctrl_remove,
.driver = {
.name = "tb10x_pinctrl",
.of_match_table = of_match_ptr(tb10x_pinctrl_dt_ids),
.owner = THIS_MODULE
}
};
static int __init tb10x_iopinctrl_init(void)
{
return platform_driver_register(&tb10x_pinctrl_pdrv);
}
static void __exit tb10x_iopinctrl_exit(void)
{
platform_driver_unregister(&tb10x_pinctrl_pdrv);
}
MODULE_AUTHOR("Christian Ruppert <christian.ruppert@abilis.com>");
MODULE_LICENSE("GPL");
module_init(tb10x_iopinctrl_init);
module_exit(tb10x_iopinctrl_exit);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7