Commit 5b1ec9ac authored by Maarten Lankhorst's avatar Maarten Lankhorst

drm/i915/backlight: Fix backlight takeover on LPT, v3.

On lynxpoint the bios sometimes sets up the backlight using the CPU
display, but the driver expects using the PWM PCH override register.

Read the value from the CPU register, then convert it to the other
units by converting from the old duty cycle, to freq, to the new units.

This value is then programmed in the override register, after which
we set the override and disable the CPU display control. This allows
us to switch the source without flickering, and make the backlight
controls work in the driver.

Changes since v1:
- Read BLC_PWM_CPU_CTL2 to cpu_ctl2.
- Clean up cpu_mode if slightly.
- Always disable BLM_PWM_ENABLE in cpu_ctl2.
Changes since v2:
- Simplify cpu_mode handling (Jani)
Signed-off-by: default avatarMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108225
Cc: Basil Eric Rabi <ericbasil.rabi@gmail.com>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Cc: Tolga Cakir <cevelnet@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: default avatarTolga Cakir <cevelnet@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108160842.13396-2-maarten.lankhorst@linux.intel.com
parent 63a23d24
...@@ -1496,8 +1496,8 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus ...@@ -1496,8 +1496,8 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus
{ {
struct drm_i915_private *dev_priv = to_i915(connector->base.dev); struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
struct intel_panel *panel = &connector->panel; struct intel_panel *panel = &connector->panel;
u32 pch_ctl1, pch_ctl2, val; u32 cpu_ctl2, pch_ctl1, pch_ctl2, val;
bool alt; bool alt, cpu_mode;
if (HAS_PCH_LPT(dev_priv)) if (HAS_PCH_LPT(dev_priv))
alt = I915_READ(SOUTH_CHICKEN2) & LPT_PWM_GRANULARITY; alt = I915_READ(SOUTH_CHICKEN2) & LPT_PWM_GRANULARITY;
...@@ -1511,6 +1511,8 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus ...@@ -1511,6 +1511,8 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus
pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2); pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2);
panel->backlight.max = pch_ctl2 >> 16; panel->backlight.max = pch_ctl2 >> 16;
cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2);
if (!panel->backlight.max) if (!panel->backlight.max)
panel->backlight.max = get_backlight_max_vbt(connector); panel->backlight.max = get_backlight_max_vbt(connector);
...@@ -1519,12 +1521,28 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus ...@@ -1519,12 +1521,28 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus
panel->backlight.min = get_backlight_min_vbt(connector); panel->backlight.min = get_backlight_min_vbt(connector);
panel->backlight.enabled = pch_ctl1 & BLM_PCH_PWM_ENABLE;
cpu_mode = panel->backlight.enabled && HAS_PCH_LPT(dev_priv) &&
!(pch_ctl1 & BLM_PCH_OVERRIDE_ENABLE) &&
(cpu_ctl2 & BLM_PWM_ENABLE);
if (cpu_mode)
val = pch_get_backlight(connector);
else
val = lpt_get_backlight(connector); val = lpt_get_backlight(connector);
val = intel_panel_compute_brightness(connector, val); val = intel_panel_compute_brightness(connector, val);
panel->backlight.level = clamp(val, panel->backlight.min, panel->backlight.level = clamp(val, panel->backlight.min,
panel->backlight.max); panel->backlight.max);
panel->backlight.enabled = pch_ctl1 & BLM_PCH_PWM_ENABLE; if (cpu_mode) {
DRM_DEBUG_KMS("CPU backlight register was enabled, switching to PCH override\n");
/* Write converted CPU PWM value to PCH override register */
lpt_set_backlight(connector->base.state, panel->backlight.level);
I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_OVERRIDE_ENABLE);
I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2 & ~BLM_PWM_ENABLE);
}
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment