Merge tag 'drm-intel-next-fixes-2015-09-02' of...

Merge tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel into drm-next

i915 display fixes headed for v4.3. Mostly SKL, but some regression
fixes too.

* tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel:
  i915: Set ddi_pll_sel in DP MST path
  drm/i915: Don't use link_bw for PLL setup
  drm/i915: Preserve SSC earlier
  drm/i915/skl: Adding DDI_E power well domain
  drm/i915: eDP can be present on DDI-E
  drm/i915/skl: Enable DDI-E
  drm/i915: Enable HDMI on DDI-E
  drm/i915: apply the PCI_D0/D3 hibernation workaround everywhere on pre GEN6
  drm/i915: Check DP link status on long hpd too
  drm/i915: set CDCLK if DPLL0 enabled during resuming from S3

drivers/gpu/drm/i915/i915_debugfs.c

@@ -2562,6 +2562,8 @@ static const char *power_domain_str(enum intel_display_power_domain domain)
 		return "PORT_DDI_D_2_LANES";
 	case POWER_DOMAIN_PORT_DDI_D_4_LANES:
 		return "PORT_DDI_D_4_LANES";
+	case POWER_DOMAIN_PORT_DDI_E_2_LANES:
+		return "PORT_DDI_E_2_LANES";
 	case POWER_DOMAIN_PORT_DSI:
 		return "PORT_DSI";
 	case POWER_DOMAIN_PORT_CRT:

drivers/gpu/drm/i915/i915_drv.c

@@ -662,15 +662,18 @@ static int i915_drm_suspend_late(struct drm_device *drm_dev, bool hibernation)
 
 	pci_disable_device(drm_dev->pdev);
 	/*
-	 * During hibernation on some GEN4 platforms the BIOS may try to access
+	 * During hibernation on some platforms the BIOS may try to access
 	 * the device even though it's already in D3 and hang the machine. So
 	 * leave the device in D0 on those platforms and hope the BIOS will
-	 * power down the device properly. Platforms where this was seen:
-	 * Lenovo Thinkpad X301, X61s
+	 * power down the device properly. The issue was seen on multiple old
+	 * GENs with different BIOS vendors, so having an explicit blacklist
+	 * is inpractical; apply the workaround on everything pre GEN6. The
+	 * platforms where the issue was seen:
+	 * Lenovo Thinkpad X301, X61s, X60, T60, X41
+	 * Fujitsu FSC S7110
+	 * Acer Aspire 1830T
 	 */
-	if (!(hibernation &&
-	      drm_dev->pdev->subsystem_vendor == PCI_VENDOR_ID_LENOVO &&
-	      INTEL_INFO(dev_priv)->gen == 4))
+	if (!(hibernation && INTEL_INFO(dev_priv)->gen < 6))
 		pci_set_power_state(drm_dev->pdev, PCI_D3hot);
 
 	return 0;

drivers/gpu/drm/i915/i915_drv.h

@@ -182,6 +182,7 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_PORT_DDI_C_4_LANES,
 	POWER_DOMAIN_PORT_DDI_D_2_LANES,
 	POWER_DOMAIN_PORT_DDI_D_4_LANES,
+	POWER_DOMAIN_PORT_DDI_E_2_LANES,
 	POWER_DOMAIN_PORT_DSI,
 	POWER_DOMAIN_PORT_CRT,
 	POWER_DOMAIN_PORT_OTHER,
@@ -1416,6 +1417,10 @@ enum modeset_restore {
 #define DP_AUX_C 0x20
 #define DP_AUX_D 0x30
 
+#define DDC_PIN_B  0x05
+#define DDC_PIN_C  0x04
+#define DDC_PIN_D  0x06
+
 struct ddi_vbt_port_info {
 	/*
 	 * This is an index in the HDMI/DVI DDI buffer translation table.
@@ -1430,6 +1435,7 @@ struct ddi_vbt_port_info {
 	uint8_t supports_dp:1;
 
 	uint8_t alternate_aux_channel;
+	uint8_t alternate_ddc_pin;
 
 	uint8_t dp_boost_level;
 	uint8_t hdmi_boost_level;

drivers/gpu/drm/i915/intel_bios.c

@@ -905,23 +905,23 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 	uint8_t hdmi_level_shift;
 	int i, j;
 	bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
-	uint8_t aux_channel;
+	uint8_t aux_channel, ddc_pin;
 	/* Each DDI port can have more than one value on the "DVO Port" field,
 	 * so look for all the possible values for each port and abort if more
 	 * than one is found. */
-	int dvo_ports[][2] = {
-		{DVO_PORT_HDMIA, DVO_PORT_DPA},
-		{DVO_PORT_HDMIB, DVO_PORT_DPB},
-		{DVO_PORT_HDMIC, DVO_PORT_DPC},
-		{DVO_PORT_HDMID, DVO_PORT_DPD},
-		{DVO_PORT_CRT, -1 /* Port E can only be DVO_PORT_CRT */ },
+	int dvo_ports[][3] = {
+		{DVO_PORT_HDMIA, DVO_PORT_DPA, -1},
+		{DVO_PORT_HDMIB, DVO_PORT_DPB, -1},
+		{DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
+		{DVO_PORT_HDMID, DVO_PORT_DPD, -1},
+		{DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
 	};
 
 	/* Find the child device to use, abort if more than one found. */
 	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
 		it = dev_priv->vbt.child_dev + i;
 
-		for (j = 0; j < 2; j++) {
+		for (j = 0; j < 3; j++) {
 			if (dvo_ports[port][j] == -1)
 				break;
 
@@ -939,6 +939,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 		return;
 
 	aux_channel = child->raw[25];
+	ddc_pin = child->common.ddc_pin;
 
 	is_dvi = child->common.device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING;
 	is_dp = child->common.device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT;
@@ -970,11 +971,27 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 		DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port));
 
 	if (is_dvi) {
-		if (child->common.ddc_pin == 0x05 && port != PORT_B)
+		if (port == PORT_E) {
+			info->alternate_ddc_pin = ddc_pin;
+			/* if DDIE share ddc pin with other port, then
+			 * dvi/hdmi couldn't exist on the shared port.
+			 * Otherwise they share the same ddc bin and system
+			 * couldn't communicate with them seperately. */
+			if (ddc_pin == DDC_PIN_B) {
+				dev_priv->vbt.ddi_port_info[PORT_B].supports_dvi = 0;
+				dev_priv->vbt.ddi_port_info[PORT_B].supports_hdmi = 0;
+			} else if (ddc_pin == DDC_PIN_C) {
+				dev_priv->vbt.ddi_port_info[PORT_C].supports_dvi = 0;
+				dev_priv->vbt.ddi_port_info[PORT_C].supports_hdmi = 0;
+			} else if (ddc_pin == DDC_PIN_D) {
+				dev_priv->vbt.ddi_port_info[PORT_D].supports_dvi = 0;
+				dev_priv->vbt.ddi_port_info[PORT_D].supports_hdmi = 0;
+			}
+		} else if (ddc_pin == DDC_PIN_B && port != PORT_B)
 			DRM_DEBUG_KMS("Unexpected DDC pin for port B\n");
-		if (child->common.ddc_pin == 0x04 && port != PORT_C)
+		else if (ddc_pin == DDC_PIN_C && port != PORT_C)
 			DRM_DEBUG_KMS("Unexpected DDC pin for port C\n");
-		if (child->common.ddc_pin == 0x06 && port != PORT_D)
+		else if (ddc_pin == DDC_PIN_D && port != PORT_D)
 			DRM_DEBUG_KMS("Unexpected DDC pin for port D\n");
 	}
 

drivers/gpu/drm/i915/intel_bios.h

@@ -758,11 +758,6 @@ int intel_parse_bios(struct drm_device *dev);
 #define		DVO_C		2
 #define		DVO_D		3
 
-/* define the PORT for DP output type */
-#define		PORT_IDPB	7
-#define		PORT_IDPC	8
-#define		PORT_IDPD	9
-
 /* Possible values for the "DVO Port" field for versions >= 155: */
 #define DVO_PORT_HDMIA	0
 #define DVO_PORT_HDMIB	1
@@ -775,6 +770,8 @@ int intel_parse_bios(struct drm_device *dev);
 #define DVO_PORT_DPC	8
 #define DVO_PORT_DPD	9
 #define DVO_PORT_DPA	10
+#define DVO_PORT_DPE	11
+#define DVO_PORT_HDMIE	12
 #define DVO_PORT_MIPIA	21
 #define DVO_PORT_MIPIB	22
 #define DVO_PORT_MIPIC	23

drivers/gpu/drm/i915/intel_ddi.c

@@ -1554,17 +1554,14 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
 			 DPLL_CFGCR2_PDIV(wrpll_params.pdiv) |
 			 wrpll_params.central_freq;
 	} else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
-		struct drm_encoder *encoder = &intel_encoder->base;
-		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
-		switch (intel_dp->link_bw) {
-		case DP_LINK_BW_1_62:
+		switch (crtc_state->port_clock / 2) {
+		case 81000:
 			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0);
 			break;
-		case DP_LINK_BW_2_7:
+		case 135000:
 			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, 0);
 			break;
-		case DP_LINK_BW_5_4:
+		case 270000:
 			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0);
 			break;
 		}

drivers/gpu/drm/i915/intel_display.c

@@ -5150,7 +5150,6 @@ static enum intel_display_power_domain port_to_power_domain(enum port port)
 {
 	switch (port) {
 	case PORT_A:
-	case PORT_E:
 		return POWER_DOMAIN_PORT_DDI_A_4_LANES;
 	case PORT_B:
 		return POWER_DOMAIN_PORT_DDI_B_4_LANES;
@@ -5158,6 +5157,8 @@ static enum intel_display_power_domain port_to_power_domain(enum port port)
 		return POWER_DOMAIN_PORT_DDI_C_4_LANES;
 	case PORT_D:
 		return POWER_DOMAIN_PORT_DDI_D_4_LANES;
+	case PORT_E:
+		return POWER_DOMAIN_PORT_DDI_E_2_LANES;
 	default:
 		WARN_ON_ONCE(1);
 		return POWER_DOMAIN_PORT_OTHER;
@@ -5712,15 +5713,12 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv)
 	/* enable PG1 and Misc I/O */
 	intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
 
-	/* DPLL0 already enabed !? */
-	if (I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE) {
-		DRM_DEBUG_DRIVER("DPLL0 already running\n");
-		return;
-	}
-
+	/* DPLL0 not enabled (happens on early BIOS versions) */
+	if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) {
 		/* enable DPLL0 */
 		required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
 		skl_dpll0_enable(dev_priv, required_vco);
+	}
 
 	/* set CDCLK to the frequency the BIOS chose */
 	skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
@@ -13963,6 +13961,15 @@ static void intel_setup_outputs(struct drm_device *dev)
 			intel_ddi_init(dev, PORT_C);
 		if (found & SFUSE_STRAP_DDID_DETECTED)
 			intel_ddi_init(dev, PORT_D);
+		/*
+		 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
+		 */
+		if (IS_SKYLAKE(dev) &&
+		    (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
+		     dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
+		     dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
+			intel_ddi_init(dev, PORT_E);
+
 	} else if (HAS_PCH_SPLIT(dev)) {
 		int found;
 		dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
@@ -14733,6 +14740,24 @@ void intel_modeset_init(struct drm_device *dev)
 	if (INTEL_INFO(dev)->num_pipes == 0)
 		return;
 
+	/*
+	 * There may be no VBT; and if the BIOS enabled SSC we can
+	 * just keep using it to avoid unnecessary flicker.  Whereas if the
+	 * BIOS isn't using it, don't assume it will work even if the VBT
+	 * indicates as much.
+	 */
+	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+		bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
+					    DREF_SSC1_ENABLE);
+
+		if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
+			DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
+				     bios_lvds_use_ssc ? "en" : "dis",
+				     dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
+			dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
+		}
+	}
+
 	intel_init_display(dev);
 	intel_init_audio(dev);
 
@@ -15292,7 +15317,6 @@ void intel_display_resume(struct drm_device *dev)
 
 void intel_modeset_gem_init(struct drm_device *dev)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *c;
 	struct drm_i915_gem_object *obj;
 	int ret;
@@ -15301,16 +15325,6 @@ void intel_modeset_gem_init(struct drm_device *dev)
 	intel_init_gt_powersave(dev);
 	mutex_unlock(&dev->struct_mutex);
 
-	/*
-	 * There may be no VBT; and if the BIOS enabled SSC we can
-	 * just keep using it to avoid unnecessary flicker.  Whereas if the
-	 * BIOS isn't using it, don't assume it will work even if the VBT
-	 * indicates as much.
-	 */
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
-		dev_priv->vbt.lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
-						DREF_SSC1_ENABLE);
-
 	intel_modeset_init_hw(dev);
 
 	intel_setup_overlay(dev);

drivers/gpu/drm/i915/intel_dp.c

@@ -48,28 +48,28 @@
 #define INTEL_DP_RESOLUTION_FAILSAFE	(3 << INTEL_DP_RESOLUTION_SHIFT_MASK)
 
 struct dp_link_dpll {
-	int link_bw;
+	int clock;
 	struct dpll dpll;
 };
 
 static const struct dp_link_dpll gen4_dpll[] = {
-	{ DP_LINK_BW_1_62,
+	{ 162000,
 		{ .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } },
-	{ DP_LINK_BW_2_7,
+	{ 270000,
 		{ .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } }
 };
 
 static const struct dp_link_dpll pch_dpll[] = {
-	{ DP_LINK_BW_1_62,
+	{ 162000,
 		{ .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } },
-	{ DP_LINK_BW_2_7,
+	{ 270000,
 		{ .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } }
 };
 
 static const struct dp_link_dpll vlv_dpll[] = {
-	{ DP_LINK_BW_1_62,
+	{ 162000,
 		{ .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } },
-	{ DP_LINK_BW_2_7,
+	{ 270000,
 		{ .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } }
 };
 
@@ -83,11 +83,11 @@ static const struct dp_link_dpll chv_dpll[] = {
 	 * m2 is stored in fixed point format using formula below
 	 * (m2_int << 22) | m2_fraction
 	 */
-	{ DP_LINK_BW_1_62,	/* m2_int = 32, m2_fraction = 1677722 */
+	{ 162000,	/* m2_int = 32, m2_fraction = 1677722 */
 		{ .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } },
-	{ DP_LINK_BW_2_7,	/* m2_int = 27, m2_fraction = 0 */
+	{ 270000,	/* m2_int = 27, m2_fraction = 0 */
 		{ .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } },
-	{ DP_LINK_BW_5_4,	/* m2_int = 27, m2_fraction = 0 */
+	{ 540000,	/* m2_int = 27, m2_fraction = 0 */
 		{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
 };
 
@@ -1130,7 +1130,7 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
 }
 
 static void
-skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
+skl_edp_set_pll_config(struct intel_crtc_state *pipe_config)
 {
 	u32 ctrl1;
 
@@ -1142,7 +1142,7 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
 	pipe_config->dpll_hw_state.cfgcr2 = 0;
 
 	ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
-	switch (link_clock / 2) {
+	switch (pipe_config->port_clock / 2) {
 	case 81000:
 		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
 					      SKL_DPLL0);
@@ -1175,20 +1175,20 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
 	pipe_config->dpll_hw_state.ctrl1 = ctrl1;
 }
 
-static void
-hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw)
+void
+hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config)
 {
 	memset(&pipe_config->dpll_hw_state, 0,
 	       sizeof(pipe_config->dpll_hw_state));
 
-	switch (link_bw) {
-	case DP_LINK_BW_1_62:
+	switch (pipe_config->port_clock / 2) {
+	case 81000:
 		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
 		break;
-	case DP_LINK_BW_2_7:
+	case 135000:
 		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
 		break;
-	case DP_LINK_BW_5_4:
+	case 270000:
 		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
 		break;
 	}
@@ -1245,7 +1245,7 @@ intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
 
 static void
 intel_dp_set_clock(struct intel_encoder *encoder,
-		   struct intel_crtc_state *pipe_config, int link_bw)
+		   struct intel_crtc_state *pipe_config)
 {
 	struct drm_device *dev = encoder->base.dev;
 	const struct dp_link_dpll *divisor = NULL;
@@ -1267,7 +1267,7 @@ intel_dp_set_clock(struct intel_encoder *encoder,
 
 	if (divisor && count) {
 		for (i = 0; i < count; i++) {
-			if (link_bw == divisor[i].link_bw) {
+			if (pipe_config->port_clock == divisor[i].clock) {
 				pipe_config->dpll = divisor[i].dpll;
 				pipe_config->clock_set = true;
 				break;
@@ -1544,13 +1544,13 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	}
 
 	if (IS_SKYLAKE(dev) && is_edp(intel_dp))
-		skl_edp_set_pll_config(pipe_config, common_rates[clock]);
+		skl_edp_set_pll_config(pipe_config);
 	else if (IS_BROXTON(dev))
 		/* handled in ddi */;
 	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
-		hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
+		hsw_dp_set_ddi_pll_sel(pipe_config);
 	else
-		intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
+		intel_dp_set_clock(encoder, pipe_config);
 
 	return true;
 }
@@ -4961,9 +4961,12 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 
 		intel_dp_probe_oui(intel_dp);
 
-		if (!intel_dp_probe_mst(intel_dp))
+		if (!intel_dp_probe_mst(intel_dp)) {
+			drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+			intel_dp_check_link_status(intel_dp);
+			drm_modeset_unlock(&dev->mode_config.connection_mutex);
 			goto mst_fail;
-
+		}
 	} else {
 		if (intel_dp->is_mst) {
 			if (intel_dp_check_mst_status(intel_dp) == -EINVAL)
@@ -4971,10 +4974,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 		}
 
 		if (!intel_dp->is_mst) {
-			/*
-			 * we'll check the link status via the normal hot plug path later -
-			 * but for short hpds we should check it now
-			 */
 			drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
 			intel_dp_check_link_status(intel_dp);
 			drm_modeset_unlock(&dev->mode_config.connection_mutex);
@@ -5016,16 +5015,17 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc)
 	return -1;
 }
 
-/* check the VBT to see whether the eDP is on DP-D port */
+/* check the VBT to see whether the eDP is on another port */
 bool intel_dp_is_edp(struct drm_device *dev, enum port port)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	union child_device_config *p_child;
 	int i;
 	static const short port_mapping[] = {
-		[PORT_B] = PORT_IDPB,
-		[PORT_C] = PORT_IDPC,
-		[PORT_D] = PORT_IDPD,
+		[PORT_B] = DVO_PORT_DPB,
+		[PORT_C] = DVO_PORT_DPC,
+		[PORT_D] = DVO_PORT_DPD,
+		[PORT_E] = DVO_PORT_DPE,
 	};
 
 	if (port == PORT_A)

drivers/gpu/drm/i915/intel_dp_mst.c

@@ -33,6 +33,7 @@
 static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
 					struct intel_crtc_state *pipe_config)
 {
+	struct drm_device *dev = encoder->base.dev;
 	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
 	struct intel_digital_port *intel_dig_port = intel_mst->primary;
 	struct intel_dp *intel_dp = &intel_dig_port->dp;
@@ -97,6 +98,10 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
 			       &pipe_config->dp_m_n);
 
 	pipe_config->dp_m_n.tu = slots;
+
+	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
+		hsw_dp_set_ddi_pll_sel(pipe_config);
+
 	return true;
 
 }

drivers/gpu/drm/i915/intel_drv.h

@@ -1185,6 +1185,7 @@ void intel_edp_drrs_disable(struct intel_dp *intel_dp);
 void intel_edp_drrs_invalidate(struct drm_device *dev,
 		unsigned frontbuffer_bits);
 void intel_edp_drrs_flush(struct drm_device *dev, unsigned frontbuffer_bits);
+void hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config);
 
 /* intel_dp_mst.c */
 int intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_id);

drivers/gpu/drm/i915/intel_hdmi.c

@@ -1958,6 +1958,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 	struct drm_device *dev = intel_encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum port port = intel_dig_port->port;
+	uint8_t alternate_ddc_pin;
 
 	drm_connector_init(dev, connector, &intel_hdmi_connector_funcs,
 			   DRM_MODE_CONNECTOR_HDMIA);
@@ -1991,6 +1992,26 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 			intel_hdmi->ddc_bus = GMBUS_PIN_DPD;
 		intel_encoder->hpd_pin = HPD_PORT_D;
 		break;
+	case PORT_E:
+		/* On SKL PORT E doesn't have seperate GMBUS pin
+		 *  We rely on VBT to set a proper alternate GMBUS pin. */
+		alternate_ddc_pin =
+			dev_priv->vbt.ddi_port_info[PORT_E].alternate_ddc_pin;
+		switch (alternate_ddc_pin) {
+		case DDC_PIN_B:
+			intel_hdmi->ddc_bus = GMBUS_PIN_DPB;
+			break;
+		case DDC_PIN_C:
+			intel_hdmi->ddc_bus = GMBUS_PIN_DPC;
+			break;
+		case DDC_PIN_D:
+			intel_hdmi->ddc_bus = GMBUS_PIN_DPD;
+			break;
+		default:
+			MISSING_CASE(alternate_ddc_pin);
+		}
+		intel_encoder->hpd_pin = HPD_PORT_E;
+		break;
 	case PORT_A:
 		intel_encoder->hpd_pin = HPD_PORT_A;
 		/* Internal port only for eDP. */

drivers/gpu/drm/i915/intel_runtime_pm.c

@@ -297,6 +297,7 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
 	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |		\
 	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |		\
 	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_E_2_LANES) |		\
 	BIT(POWER_DOMAIN_AUX_B) |                       \
 	BIT(POWER_DOMAIN_AUX_C) |			\
 	BIT(POWER_DOMAIN_AUX_D) |			\
@@ -316,6 +317,7 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
 #define SKL_DISPLAY_DDI_A_E_POWER_DOMAINS (		\
 	BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) |		\
 	BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_E_2_LANES) |		\
 	BIT(POWER_DOMAIN_INIT))
 #define SKL_DISPLAY_DDI_B_POWER_DOMAINS (		\
 	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |		\