Commit 5ba643c6 authored by Tony Nguyen's avatar Tony Nguyen Committed by Jeff Kirsher

ixgbe: Fix kernel-doc format warnings

Recent checks added for formatting kernel-doc comments are causing warnings
if W= is run with a non-zero value.  This patch fixes function comments to
resolve warnings when W=1 is used.
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent d584527c
......@@ -431,6 +431,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
/**
* ixgbe_start_mac_link_82598 - Configures MAC link settings
* @hw: pointer to hardware structure
* @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Configures link settings based on values in the ixgbe_hw struct.
* Restarts the link. Performs autonegotiation if needed.
......@@ -1054,7 +1055,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
* ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
* @hw: pointer to hardware structure
* @byte_offset: byte offset at address 0xA2
* @eeprom_data: value read
* @sff8472_data: value read
*
* Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
**/
......
......@@ -221,7 +221,7 @@ static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked,
/**
* prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
* @hw: pointer to hardware structure
* @reg_val: value to write to AUTOC
* @autoc: value to write to AUTOC
* @locked: bool to indicate whether the SW/FW lock was already taken by
* previous proc_autoc_read_82599.
*
......@@ -1310,10 +1310,11 @@ do { \
/**
* ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
* @stream: input bitstream to compute the hash on
* @input: input bitstream to compute the hash on
* @common: compressed common input dword
*
* This function is almost identical to the function above but contains
* several optomizations such as unwinding all of the loops, letting the
* several optimizations such as unwinding all of the loops, letting the
* compiler work out all of the conditional ifs since the keys are static
* defines, and computing two keys at once since the hashed dword stream
* will be the same for both keys.
......@@ -1446,7 +1447,7 @@ do { \
/**
* ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
* @atr_input: input bitstream to compute the hash on
* @input: input bitstream to compute the hash on
* @input_mask: mask for the input bitstream
*
* This function serves two main purposes. First it applies the input_mask
......@@ -2078,6 +2079,7 @@ static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
* ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to read
* @dev_addr: address to read from
* @data: value read
*
* Performs byte read operation to SFP module's EEPROM over I2C interface at
......@@ -2131,6 +2133,7 @@ static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
* ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to write
* @dev_addr: address to write to
* @data: value to write
*
* Performs byte write operation to SFP module's EEPROM over I2C interface at
......
......@@ -1613,6 +1613,7 @@ static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
/**
* ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
* @hw: pointer to hardware structure
* @count: number of bits to shift
**/
static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
{
......@@ -1667,7 +1668,7 @@ static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
/**
* ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
* @hw: pointer to hardware structure
* @eecd: EECD's current value
* @eec: EEC's current value
**/
static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
{
......@@ -2037,7 +2038,7 @@ static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
/**
* ixgbe_set_mta - Set bit-vector in multicast table
* @hw: pointer to hardware structure
* @hash_value: Multicast address hash value
* @mc_addr: Multicast address
*
* Sets the bit-vector in the multicast table.
**/
......@@ -3086,6 +3087,8 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
* ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
* @hw: pointer to hardware structure
* @vlan: VLAN id to write to VLAN filter
* @vlvf_bypass: true to find vlanid only, false returns first empty slot if
* vlanid not found
*
* return the VLVF index where this VLAN id should be placed
*
......@@ -3476,7 +3479,7 @@ void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
* ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
* @hw: pointer to hardware structure
* @enable: enable or disable switch for VLAN anti-spoofing
* @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
* @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
*
**/
void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
......
......@@ -39,6 +39,10 @@
* are the smallest unit programmable into the underlying
* hardware. The IEEE 802.1Qaz specification do not use bandwidth
* groups so this is much simplified from the CEE case.
* @bw: bandwidth index by traffic class
* @refill: refill credits index by traffic class
* @max: max credits by traffic class
* @max_frame: maximum frame size
*/
static s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill,
__u16 *max, int max_frame)
......@@ -72,8 +76,10 @@ static s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill,
/**
* ixgbe_dcb_calculate_tc_credits - Calculates traffic class credits
* @ixgbe_dcb_config: Struct containing DCB settings.
* @direction: Configuring either Tx or Rx.
* @hw: pointer to hardware structure
* @dcb_config: Struct containing DCB settings
* @max_frame: Maximum frame size
* @direction: Configuring either Tx or Rx
*
* This function calculates the credits allocated to each traffic class.
* It should be called only after the rules are checked by
......
......@@ -34,7 +34,9 @@
/**
* ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
* @refill: refill credits index by traffic class
* @max: max credits index by traffic class
* @prio_type: priority type indexed by traffic class
*
* Configure Rx Data Arbiter and credits for each traffic class.
*/
......@@ -91,7 +93,10 @@ s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
/**
* ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
* @refill: refill credits index by traffic class
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
*
* Configure Tx Descriptor Arbiter and credits for each traffic class.
*/
......@@ -137,7 +142,10 @@ s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
/**
* ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
* @refill: refill credits index by traffic class
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
*
* Configure Tx Data Arbiter and credits for each traffic class.
*/
......@@ -184,7 +192,7 @@ s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
/**
* ixgbe_dcb_config_pfc_82598 - Config priority flow control
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
* @pfc_en: enabled pfc bitmask
*
* Configure Priority Flow Control for each traffic class.
*/
......@@ -269,7 +277,11 @@ static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
/**
* ixgbe_dcb_hw_config_82598 - Config and enable DCB
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
* @pfc_en: enabled pfc bitmask
* @refill: refill credits index by traffic class
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
*
* Configure dcb settings and enable dcb mode.
*/
......
......@@ -38,6 +38,7 @@
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
* @prio_tc: priority to tc assignments indexed by priority
*
* Configure Rx Packet Arbiter and credits for each traffic class.
*/
......@@ -148,6 +149,7 @@ s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
* @prio_tc: priority to tc assignments indexed by priority
*
* Configure Tx Packet Arbiter and credits for each traffic class.
*/
......@@ -344,11 +346,12 @@ static s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw)
/**
* ixgbe_dcb_hw_config_82599 - Configure and enable DCB
* @hw: pointer to hardware structure
* @pfc_en: enabled pfc bitmask
* @refill: refill credits index by traffic class
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
* @pfc_en: enabled pfc bitmask
* @prio_tc: priority to tc assignments indexed by priority
*
* Configure dcb settings and enable dcb mode.
*/
......
......@@ -249,7 +249,7 @@ void ixgbe_dbg_adapter_init(struct ixgbe_adapter *adapter)
/**
* ixgbe_dbg_adapter_exit - clear out the adapter's debugfs entries
* @pf: the pf that is stopping
* @adapter: the adapter that is exiting
**/
void ixgbe_dbg_adapter_exit(struct ixgbe_adapter *adapter)
{
......
......@@ -150,6 +150,7 @@ int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid)
* @xid: the exchange id requesting ddp
* @sgl: the scatter-gather list for this request
* @sgc: the number of scatter-gather items
* @target_mode: 1 to setup target mode, 0 to setup initiator mode
*
* Returns : 1 for success and 0 for no ddp
*/
......@@ -1063,7 +1064,7 @@ int ixgbe_fcoe_get_hbainfo(struct net_device *netdev,
/**
* ixgbe_fcoe_get_tc - get the current TC that fcoe is mapped to
* @adapter - pointer to the device adapter structure
* @adapter: pointer to the device adapter structure
*
* Return : TC that FCoE is mapped to
*/
......
......@@ -1128,6 +1128,9 @@ static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter)
/**
* ixgbe_tx_maxrate - callback to set the maximum per-queue bitrate
* @netdev: network interface device structure
* @queue_index: Tx queue to set
* @maxrate: desired maximum transmit bitrate
**/
static int ixgbe_tx_maxrate(struct net_device *netdev,
int queue_index, u32 maxrate)
......@@ -2025,8 +2028,8 @@ static bool ixgbe_can_reuse_rx_page(struct ixgbe_rx_buffer *rx_buffer)
* ixgbe_add_rx_frag - Add contents of Rx buffer to sk_buff
* @rx_ring: rx descriptor ring to transact packets on
* @rx_buffer: buffer containing page to add
* @rx_desc: descriptor containing length of buffer written by hardware
* @skb: sk_buff to place the data into
* @size: size of data in rx_buffer
*
* This function will add the data contained in rx_buffer->page to the skb.
* This is done either through a direct copy if the data in the buffer is
......@@ -3017,6 +3020,8 @@ static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
/**
* ixgbe_irq_enable - Enable default interrupt generation settings
* @adapter: board private structure
* @queues: enable irqs for queues
* @flush: flush register write
**/
static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
bool flush)
......@@ -3472,6 +3477,7 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
/**
* ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
* @adapter: board private structure
*
**/
static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
......@@ -4001,7 +4007,7 @@ static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
/**
* ixgbe_configure_rscctl - enable RSC for the indicated ring
* @adapter: address of board private structure
* @index: index of ring to set
* @ring: structure containing ring specific data
**/
static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
struct ixgbe_ring *ring)
......@@ -4857,9 +4863,11 @@ int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter,
return -ENOMEM;
}
/**
* ixgbe_write_uc_addr_list - write unicast addresses to RAR table
* @netdev: network interface device structure
* @vfn: pool to associate with unicast addresses
*
* Writes unicast address list to the RAR table.
* Returns: -ENOMEM on failure/insufficient address space
......@@ -6037,6 +6045,7 @@ static void ixgbe_init_dcb(struct ixgbe_adapter *adapter)
/**
* ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter)
* @adapter: board private structure to initialize
* @ii: pointer to ixgbe_info for device
*
* ixgbe_sw_init initializes the Adapter private data structure.
* Fields are initialized based on PCI device information and
......@@ -6321,6 +6330,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
/**
* ixgbe_setup_rx_resources - allocate Rx resources (Descriptors)
* @adapter: pointer to ixgbe_adapter
* @rx_ring: rx descriptor ring (for a specific queue) to setup
*
* Returns 0 on success, negative on failure
......@@ -7133,7 +7143,6 @@ static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter)
/**
* ixgbe_watchdog_update_link - update the link status
* @adapter: pointer to the device adapter structure
* @link_speed: pointer to a u32 to store the link_speed
**/
static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
{
......@@ -7586,7 +7595,7 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
/**
* ixgbe_service_timer - Timer Call-back
* @data: pointer to adapter cast into an unsigned long
* @t: pointer to timer_list structure
**/
static void ixgbe_service_timer(struct timer_list *t)
{
......@@ -8574,7 +8583,7 @@ static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
/**
* ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding
* netdev->dev_addrs
* @netdev: network interface device structure
* @dev: network interface device structure
*
* Returns non-zero on failure
**/
......@@ -8598,7 +8607,7 @@ static int ixgbe_add_sanmac_netdev(struct net_device *dev)
/**
* ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding
* netdev->dev_addrs
* @netdev: network interface device structure
* @dev: network interface device structure
*
* Returns non-zero on failure
**/
......@@ -8765,7 +8774,7 @@ static void ixgbe_set_prio_tc_map(struct ixgbe_adapter *adapter)
/**
* ixgbe_setup_tc - configure net_device for multiple traffic classes
*
* @netdev: net device to configure
* @dev: net device to configure
* @tc: number of traffic classes to enable
*/
int ixgbe_setup_tc(struct net_device *dev, u8 tc)
......@@ -9602,8 +9611,8 @@ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
/**
* ixgbe_configure_bridge_mode - set various bridge modes
* @adapter - the private structure
* @mode - requested bridge mode
* @adapter: the private structure
* @mode: requested bridge mode
*
* Configure some settings require for various bridge modes.
**/
......@@ -10071,7 +10080,7 @@ static inline int ixgbe_enumerate_functions(struct ixgbe_adapter *adapter)
* ixgbe_wol_supported - Check whether device supports WoL
* @adapter: the adapter private structure
* @device_id: the device ID
* @subdev_id: the subsystem device ID
* @subdevice_id: the subsystem device ID
*
* This function is used by probe and ethtool to determine
* which devices have WoL support
......
......@@ -378,7 +378,7 @@ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
/**
* ixgbe_get_phy_type_from_id - Get the phy type
* @hw: pointer to hardware structure
* @phy_id: hardware phy id
*
**/
static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
......@@ -489,6 +489,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
* the SWFW lock
* @hw: pointer to hardware structure
* @reg_addr: 32 bit address of PHY register to read
* @device_type: 5 bit device type
* @phy_data: Pointer to read data from PHY register
**/
s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
......@@ -564,6 +565,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
* using the SWFW lock - this function is needed in most cases
* @hw: pointer to hardware structure
* @reg_addr: 32 bit address of PHY register to read
* @device_type: 5 bit device type
* @phy_data: Pointer to read data from PHY register
**/
s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
......@@ -763,6 +765,7 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
* ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg_wait_to_complete: unused
**/
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
......@@ -861,6 +864,8 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
/**
* ixgbe_check_phy_link_tnx - Determine link and speed status
* @hw: pointer to hardware structure
* @speed: link speed
* @link_up: status of link
*
* Reads the VS1 register to determine if link is up and the current speed for
* the PHY.
......@@ -1667,7 +1672,7 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
* ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
* @hw: pointer to hardware structure
* @byte_offset: byte offset at address 0xA2
* @eeprom_data: value read
* @sff8472_data: value read
*
* Performs byte read operation to SFP module's SFF-8472 data over I2C
**/
......@@ -1714,6 +1719,7 @@ static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
* ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to read
* @dev_addr: device address
* @data: value read
* @lock: true if to take and release semaphore
*
......@@ -1804,6 +1810,7 @@ static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
* ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to read
* @dev_addr: device address
* @data: value read
*
* Performs byte read operation to SFP module's EEPROM over I2C interface at
......@@ -1820,6 +1827,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
* ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to read
* @dev_addr: device address
* @data: value read
*
* Performs byte read operation to SFP module's EEPROM over I2C interface at
......@@ -1836,6 +1844,7 @@ s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
* ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to write
* @dev_addr: device address
* @data: value to write
* @lock: true if to take and release semaphore
*
......@@ -1904,6 +1913,7 @@ static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
* ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to write
* @dev_addr: device address
* @data: value to write
*
* Performs byte write operation to SFP module's EEPROM over I2C interface at
......@@ -1920,6 +1930,7 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
* ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to write
* @dev_addr: device address
* @data: value to write
*
* Performs byte write operation to SFP module's EEPROM over I2C interface at
......
......@@ -166,7 +166,7 @@
/**
* ixgbe_ptp_setup_sdp_x540
* @hw: the hardware private structure
* @adapter: private adapter structure
*
* this function enables or disables the clock out feature on SDP0 for
* the X540 device. It will create a 1second periodic output that can
......@@ -299,7 +299,7 @@ static u64 ixgbe_ptp_read_82599(const struct cyclecounter *cc)
* ixgbe_ptp_convert_to_hwtstamp - convert register value to hw timestamp
* @adapter: private adapter structure
* @hwtstamp: stack timestamp structure
* @systim: unsigned 64bit system time value
* @timestamp: unsigned 64bit system time value
*
* We need to convert the adapter's RX/TXSTMP registers into a hwtstamp value
* which can be used by the stack's ptp functions.
......@@ -1015,7 +1015,7 @@ static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter,
/**
* ixgbe_ptp_set_ts_config - user entry point for timestamp mode
* @adapter: pointer to adapter struct
* @ifreq: ioctl data
* @ifr: ioctl data
*
* Set hardware to requested mode. If unsupported, return an error with no
* changes. Otherwise, store the mode for future reference.
......@@ -1338,7 +1338,7 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
/**
* ixgbe_ptp_suspend - stop PTP work items
* @ adapter: pointer to adapter struct
* @adapter: pointer to adapter struct
*
* this function suspends PTP activity, and prevents more PTP work from being
* generated, but does not destroy the PTP clock device.
......
......@@ -1644,6 +1644,8 @@ static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
/**
* ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP.
* @hw: pointer to hardware structure
* @speed: the link speed to force
* @autoneg_wait_to_complete: unused
*
* Configures the extern PHY and the integrated KR PHY for SFP support.
*/
......@@ -1737,6 +1739,8 @@ static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
/**
* ixgbe_setup_mac_link_sfp_n - Setup internal PHY for native SFP
* @hw: pointer to hardware structure
* @speed: link speed
* @autoneg_wait_to_complete: unused
*
* Configure the the integrated PHY for native SFP support.
*/
......@@ -1784,6 +1788,8 @@ ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
/**
* ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
* @hw: pointer to hardware structure
* @speed: link speed
* @autoneg_wait_to_complete: unused
*
* Configure the the integrated PHY for SFP support.
*/
......@@ -1859,7 +1865,7 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
* ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg_wait_to_complete: true when waiting for completion is needed
* @autoneg_wait: true when waiting for completion is needed
*
* Setup internal/external PHY link speed based on link speed, then set
* external PHY auto advertised link speed.
......@@ -1943,6 +1949,8 @@ static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw,
/**
* ixgbe_setup_sgmii - Set up link for sgmii
* @hw: pointer to hardware structure
* @speed: unused
* @autoneg_wait_to_complete: unused
*/
static s32
ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
......@@ -2014,6 +2022,8 @@ ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
/**
* ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs
* @hw: pointer to hardware structure
* @speed: the link speed to force
* @autoneg_wait: true when waiting for completion is needed
*/
static s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed,
bool autoneg_wait)
......@@ -3735,6 +3745,7 @@ static void ixgbe_release_swfw_sync_x550em_a(struct ixgbe_hw *hw, u32 mask)
* ixgbe_read_phy_reg_x550a - Reads specified PHY register
* @hw: pointer to hardware structure
* @reg_addr: 32 bit address of PHY register to read
* @device_type: 5 bit device type
* @phy_data: Pointer to read data from PHY register
*
* Reads a value from a specified PHY register using the SWFW lock and PHY
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment