Merge tag 'mac80211-next-for-net-next-2019-11-08' of...

Merge tag 'mac80211-next-for-net-next-2019-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Some relatively small changes:
 * typo fixes in docs
 * APIs for station separation using VLAN tags rather
   than separate wifi netdevs
 * some preparations for upcoming features (802.3 offload
   and airtime queue limits (AQL)
 * stack reduction in ieee80211_assoc_success()
 * use DEFINE_DEBUGFS_ATTRIBUTE in hwsim
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wireless/mac80211_hwsim.c

@@ -769,7 +769,7 @@ static int hwsim_fops_ps_write(void *dat, u64 val)
 	return 0;
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(hwsim_fops_ps, hwsim_fops_ps_read, hwsim_fops_ps_write,
+DEFINE_DEBUGFS_ATTRIBUTE(hwsim_fops_ps, hwsim_fops_ps_read, hwsim_fops_ps_write,
 			 "%llu\n");
 
 static int hwsim_write_simulate_radar(void *dat, u64 val)
@@ -781,7 +781,7 @@ static int hwsim_write_simulate_radar(void *dat, u64 val)
 	return 0;
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(hwsim_simulate_radar, NULL,
+DEFINE_DEBUGFS_ATTRIBUTE(hwsim_simulate_radar, NULL,
 			 hwsim_write_simulate_radar, "%llu\n");
 
 static int hwsim_fops_group_read(void *dat, u64 *val)
@@ -798,7 +798,7 @@ static int hwsim_fops_group_write(void *dat, u64 val)
 	return 0;
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(hwsim_fops_group,
+DEFINE_DEBUGFS_ATTRIBUTE(hwsim_fops_group,
 			 hwsim_fops_group_read, hwsim_fops_group_write,
 			 "%llx\n");
 

include/net/cfg80211.h

@@ -565,6 +565,7 @@ struct vif_params {
  *	with the get_key() callback, must be in little endian,
  *	length given by @seq_len.
  * @seq_len: length of @seq.
+ * @vlan_id: vlan_id for VLAN group key (if nonzero)
  * @mode: key install mode (RX_TX, NO_TX or SET_TX)
  */
 struct key_params {
@@ -572,6 +573,7 @@ struct key_params {
 	const u8 *seq;
 	int key_len;
 	int seq_len;
+	u16 vlan_id;
 	u32 cipher;
 	enum nl80211_key_mode mode;
 };
@@ -1124,6 +1126,7 @@ struct sta_txpwr {
  *	(bitmask of BIT(%NL80211_STA_FLAG_...))
  * @listen_interval: listen interval or -1 for no change
  * @aid: AID or zero for no change
+ * @vlan_id: VLAN ID for station (if nonzero)
  * @peer_aid: mesh peer AID or zero for no change
  * @plink_action: plink action to take
  * @plink_state: set the peer link state for a station
@@ -1159,6 +1162,7 @@ struct station_parameters {
 	u32 sta_modify_mask;
 	int listen_interval;
 	u16 aid;
+	u16 vlan_id;
 	u16 peer_aid;
 	u8 supported_rates_len;
 	u8 plink_action;

include/net/mac80211.h

@@ -312,7 +312,7 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected
  *	keep alive) changed.
  * @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
- * @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
+ * @BSS_CHANGED_FTM_RESPONDER: fine timing measurement request responder
  *	functionality changed for this BSS (AP mode).
  * @BSS_CHANGED_TWT: TWT status changed
  * @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed.
@@ -967,6 +967,7 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
  * @band: the band to transmit on (use for checking for races)
  * @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC
  * @ack_frame_id: internal frame ID for TX status, used internally
+ * @tx_time_est: TX time estimate in units of 4us, used internally
  * @control: union part for control data
  * @control.rates: TX rates array to try
  * @control.rts_cts_rate_idx: rate for RTS or CTS
@@ -1007,7 +1008,8 @@ struct ieee80211_tx_info {
 
 	u8 hw_queue;
 
-	u16 ack_frame_id;
+	u16 ack_frame_id:6;
+	u16 tx_time_est:10;
 
 	union {
 		struct {
@@ -1059,7 +1061,7 @@ struct ieee80211_tx_info {
 };
 
 /**
- * struct ieee80211_tx_status - extended tx staus info for rate control
+ * struct ieee80211_tx_status - extended tx status info for rate control
  *
  * @sta: Station that the packet was transmitted for
  * @info: Basic tx status information
@@ -1702,7 +1704,7 @@ struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif);
  *	%IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
  * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
  *	driver for a CCMP/GCMP key to indicate that is requires IV generation
- *	only for managment frames (MFP).
+ *	only for management frames (MFP).
  * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
  *	driver for a key to indicate that sufficient tailroom must always
  *	be reserved for ICV or MIC, even when HW encryption is enabled.
@@ -1998,7 +2000,7 @@ struct ieee80211_sta {
 	 *
 	 * * If the skb is transmitted as part of a BA agreement, the
 	 *   A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
-	 * * If the skb is not part of a BA aggreement, the A-MSDU maximal
+	 * * If the skb is not part of a BA agreement, the A-MSDU maximal
 	 *   size is min(max_amsdu_len, 7935) bytes.
 	 *
 	 * Both additional HT limits must be enforced by the low level
@@ -2626,7 +2628,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * @hw: the hardware
  * @skb: the skb
  *
- * Free a transmit skb. Use this funtion when some failure
+ * Free a transmit skb. Use this function when some failure
  * to transmit happened and thus status cannot be reported.
  */
 void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -3187,13 +3189,13 @@ enum ieee80211_rate_control_changed {
  *
  * With the support for multi channel contexts and multi channel operations,
  * remain on channel operations might be limited/deferred/aborted by other
- * flows/operations which have higher priority (and vise versa).
+ * flows/operations which have higher priority (and vice versa).
  * Specifying the ROC type can be used by devices to prioritize the ROC
  * operations compared to other operations/flows.
  *
  * @IEEE80211_ROC_TYPE_NORMAL: There are no special requirements for this ROC.
  * @IEEE80211_ROC_TYPE_MGMT_TX: The remain on channel request is required
- *	for sending managment frames offchannel.
+ *	for sending management frames offchannel.
  */
 enum ieee80211_roc_type {
 	IEEE80211_ROC_TYPE_NORMAL = 0,
@@ -5616,7 +5618,7 @@ void ieee80211_iter_keys_rcu(struct ieee80211_hw *hw,
 
 /**
  * ieee80211_iter_chan_contexts_atomic - iterate channel contexts
- * @hw: pointre obtained from ieee80211_alloc_hw().
+ * @hw: pointer obtained from ieee80211_alloc_hw().
  * @iter: iterator function
  * @iter_data: data passed to iterator function
  *
@@ -6364,7 +6366,7 @@ ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq,
  * again.
  *
  * The API ieee80211_txq_may_transmit() also ensures that TXQ list will be
- * aligned aginst driver's own round-robin scheduler list. i.e it rotates
+ * aligned against driver's own round-robin scheduler list. i.e it rotates
  * the TXQ list till it makes the requested node becomes the first entry
  * in TXQ list. Thus both the TXQ list and driver's list are in sync. If this
  * function returns %true, the driver is expected to schedule packets

include/uapi/linux/nl80211.h

@@ -248,6 +248,22 @@
  * %NL80211_ATTR_SAE_PASSWORD.
  */
 
+/**
+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs
+ *
+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they
+ * support offloading VLAN functionality in a manner where the driver exposes a
+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs
+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet
+ * case. Frames received from stations that are not assigned to any VLAN are
+ * delivered on the main netdev and frames to such stations can be sent through
+ * that main netdev.
+ *
+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and
+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using
+ * %NL80211_ATTR_VLAN_ID.
+ */
+
 /**
  * enum nl80211_commands - supported nl80211 commands
  *
@@ -2381,6 +2397,9 @@ enum nl80211_commands {
  *	the allowed channel bandwidth configurations. (u8 attribute)
  *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
  *
+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
+ *	(u16).
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2843,6 +2862,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_EDMG_CHANNELS,
 	NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
 
+	NL80211_ATTR_VLAN_ID,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -5492,6 +5513,10 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
  *	station mode (SAE password is passed as part of the connect command).
  *
+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
+ *	with VLAN tagged frames and separate VLAN-specific netdevs added using
+ *	vconfig similarly to the Ethernet case.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5537,6 +5562,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_EXT_KEY_ID,
 	NL80211_EXT_FEATURE_STA_TX_PWR,
 	NL80211_EXT_FEATURE_SAE_OFFLOAD,
+	NL80211_EXT_FEATURE_VLAN_OFFLOAD,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,

net/mac80211/cfg.c

@@ -3428,7 +3428,7 @@ int ieee80211_attach_ack_skb(struct ieee80211_local *local, struct sk_buff *skb,
 
 	spin_lock_irqsave(&local->ack_status_lock, spin_flags);
 	id = idr_alloc(&local->ack_status_frames, ack_skb,
-		       1, 0x10000, GFP_ATOMIC);
+		       1, 0x40, GFP_ATOMIC);
 	spin_unlock_irqrestore(&local->ack_status_lock, spin_flags);
 
 	if (id < 0) {

net/mac80211/tx.c

@@ -2417,6 +2417,33 @@ static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata,
 	return 0;
 }
 
+static int ieee80211_store_ack_skb(struct ieee80211_local *local,
+				   struct sk_buff *skb,
+				   u32 *info_flags)
+{
+	struct sk_buff *ack_skb = skb_clone_sk(skb);
+	u16 info_id = 0;
+
+	if (ack_skb) {
+		unsigned long flags;
+		int id;
+
+		spin_lock_irqsave(&local->ack_status_lock, flags);
+		id = idr_alloc(&local->ack_status_frames, ack_skb,
+			       1, 0x40, GFP_ATOMIC);
+		spin_unlock_irqrestore(&local->ack_status_lock, flags);
+
+		if (id >= 0) {
+			info_id = id;
+			*info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+		} else {
+			kfree_skb(ack_skb);
+		}
+	}
+
+	return info_id;
+}
+
 /**
  * ieee80211_build_hdr - build 802.11 header in the given frame
  * @sdata: virtual interface to build the header for
@@ -2710,26 +2737,8 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (unlikely(!multicast && skb->sk &&
-		     skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS)) {
-		struct sk_buff *ack_skb = skb_clone_sk(skb);
-
-		if (ack_skb) {
-			unsigned long flags;
-			int id;
-
-			spin_lock_irqsave(&local->ack_status_lock, flags);
-			id = idr_alloc(&local->ack_status_frames, ack_skb,
-				       1, 0x10000, GFP_ATOMIC);
-			spin_unlock_irqrestore(&local->ack_status_lock, flags);
-
-			if (id >= 0) {
-				info_id = id;
-				info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
-			} else {
-				kfree_skb(ack_skb);
-			}
-		}
-	}
+		     skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS))
+		info_id = ieee80211_store_ack_skb(local, skb, &info_flags);
 
 	/*
 	 * If the skb is shared we need to obtain our own copy.

net/wireless/nl80211.c

@@ -624,6 +624,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 					.len = SAE_PASSWORD_MAX_LEN },
 	[NL80211_ATTR_TWT_RESPONDER] = { .type = NLA_FLAG },
 	[NL80211_ATTR_HE_OBSS_PD] = NLA_POLICY_NESTED(he_obss_pd_policy),
+	[NL80211_ATTR_VLAN_ID] = NLA_POLICY_RANGE(NLA_U16, 1, VLAN_N_VID - 2),
 };
 
 /* policy for the key attributes */
@@ -3940,6 +3941,10 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 	    key.type != NL80211_KEYTYPE_GROUP)
 		return -EINVAL;
 
+	if (key.type == NL80211_KEYTYPE_GROUP &&
+	    info->attrs[NL80211_ATTR_VLAN_ID])
+		key.p.vlan_id = nla_get_u16(info->attrs[NL80211_ATTR_VLAN_ID]);
+
 	if (!rdev->ops->add_key)
 		return -EOPNOTSUPP;
 
@@ -5711,6 +5716,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_STA_AID])
 		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
 
+	if (info->attrs[NL80211_ATTR_VLAN_ID])
+		params.vlan_id = nla_get_u16(info->attrs[NL80211_ATTR_VLAN_ID]);
+
 	if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
 		params.listen_interval =
 		     nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
@@ -5856,6 +5864,9 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	params.listen_interval =
 		nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
 
+	if (info->attrs[NL80211_ATTR_VLAN_ID])
+		params.vlan_id = nla_get_u16(info->attrs[NL80211_ATTR_VLAN_ID]);
+
 	if (info->attrs[NL80211_ATTR_STA_SUPPORT_P2P_PS]) {
 		params.support_p2p_ps =
 			nla_get_u8(info->attrs[NL80211_ATTR_STA_SUPPORT_P2P_PS]);