Commit 5ca709c1 authored by Marc Zyngier's avatar Marc Zyngier

ARM: local timers: convert MSM to runtime registration interface

Convert the MSM timers to the runtime registration interface.
Acked-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Tested-by: default avatarDavid Brown <davidb@codeaurora.org>
Acked-by: default avatarDavid Brown <davidb@codeaurora.org>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
parent a8cb6041
...@@ -127,6 +127,45 @@ static struct clocksource msm_clocksource = { ...@@ -127,6 +127,45 @@ static struct clocksource msm_clocksource = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS, .flags = CLOCK_SOURCE_IS_CONTINUOUS,
}; };
#ifdef CONFIG_LOCAL_TIMERS
static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt)
{
/* Use existing clock_event for cpu 0 */
if (!smp_processor_id())
return 0;
writel_relaxed(0, event_base + TIMER_ENABLE);
writel_relaxed(0, event_base + TIMER_CLEAR);
writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
evt->irq = msm_clockevent.irq;
evt->name = "local_timer";
evt->features = msm_clockevent.features;
evt->rating = msm_clockevent.rating;
evt->set_mode = msm_timer_set_mode;
evt->set_next_event = msm_timer_set_next_event;
evt->shift = msm_clockevent.shift;
evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
evt->min_delta_ns = clockevent_delta2ns(4, evt);
*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
clockevents_register_device(evt);
enable_percpu_irq(evt->irq, 0);
return 0;
}
static void msm_local_timer_stop(struct clock_event_device *evt)
{
evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
disable_percpu_irq(evt->irq);
}
static struct local_timer_ops msm_local_timer_ops __cpuinitdata = {
.setup = msm_local_timer_setup,
.stop = msm_local_timer_stop,
};
#endif /* CONFIG_LOCAL_TIMERS */
static void __init msm_timer_init(void) static void __init msm_timer_init(void)
{ {
struct clock_event_device *ce = &msm_clockevent; struct clock_event_device *ce = &msm_clockevent;
...@@ -173,8 +212,12 @@ static void __init msm_timer_init(void) ...@@ -173,8 +212,12 @@ static void __init msm_timer_init(void)
*__this_cpu_ptr(msm_evt.percpu_evt) = ce; *__this_cpu_ptr(msm_evt.percpu_evt) = ce;
res = request_percpu_irq(ce->irq, msm_timer_interrupt, res = request_percpu_irq(ce->irq, msm_timer_interrupt,
ce->name, msm_evt.percpu_evt); ce->name, msm_evt.percpu_evt);
if (!res) if (!res) {
enable_percpu_irq(ce->irq, 0); enable_percpu_irq(ce->irq, 0);
#ifdef CONFIG_LOCAL_TIMERS
local_timer_register(&msm_local_timer_ops);
#endif
}
} else { } else {
msm_evt.evt = ce; msm_evt.evt = ce;
res = request_irq(ce->irq, msm_timer_interrupt, res = request_irq(ce->irq, msm_timer_interrupt,
...@@ -191,40 +234,6 @@ static void __init msm_timer_init(void) ...@@ -191,40 +234,6 @@ static void __init msm_timer_init(void)
pr_err("clocksource_register failed\n"); pr_err("clocksource_register failed\n");
} }
#ifdef CONFIG_LOCAL_TIMERS
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
/* Use existing clock_event for cpu 0 */
if (!smp_processor_id())
return 0;
writel_relaxed(0, event_base + TIMER_ENABLE);
writel_relaxed(0, event_base + TIMER_CLEAR);
writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
evt->irq = msm_clockevent.irq;
evt->name = "local_timer";
evt->features = msm_clockevent.features;
evt->rating = msm_clockevent.rating;
evt->set_mode = msm_timer_set_mode;
evt->set_next_event = msm_timer_set_next_event;
evt->shift = msm_clockevent.shift;
evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
evt->min_delta_ns = clockevent_delta2ns(4, evt);
*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
clockevents_register_device(evt);
enable_percpu_irq(evt->irq, 0);
return 0;
}
void local_timer_stop(struct clock_event_device *evt)
{
evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
disable_percpu_irq(evt->irq);
}
#endif /* CONFIG_LOCAL_TIMERS */
struct sys_timer msm_timer = { struct sys_timer msm_timer = {
.init = msm_timer_init .init = msm_timer_init
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment