Merge branch 'xen-upstream' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jeremy/xen

* 'xen-upstream' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (44 commits)
  xen: disable all non-virtual drivers
  xen: use iret directly when possible
  xen: suppress abs symbol warnings for unused reloc pointers
  xen: Attempt to patch inline versions of common operations
  xen: Place vcpu_info structure into per-cpu memory
  xen: handle external requests for shutdown, reboot and sysrq
  xen: machine operations
  xen: add virtual network device driver
  xen: add virtual block device driver.
  xen: add the Xenbus sysfs and virtual device hotplug driver
  xen: Add grant table support
  xen: use the hvc console infrastructure for Xen console
  xen: hack to prevent bad segment register reload
  xen: lazy-mmu operations
  xen: Add support for preemption
  xen: SMP guest support
  xen: Implement sched_clock
  xen: Account for stolen time
  xen: ignore RW mapping of RO pages in pagetable_init
  xen: Complete pagetable pinning
  ...

arch/i386/Kconfig

@@ -222,6 +222,8 @@ config PARAVIRT
 	  However, when run without a hypervisor the kernel is
 	  theoretically slower.  If in doubt, say N.
 
+source "arch/i386/xen/Kconfig"
+
 config VMI
 	bool "VMI Paravirt-ops support"
 	depends on PARAVIRT

arch/i386/Makefile

@@ -93,6 +93,9 @@ mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-i386/mach-es7000
 mcore-$(CONFIG_X86_ES7000)	:= mach-default
 core-$(CONFIG_X86_ES7000)	:= arch/i386/mach-es7000/
 
+# Xen paravirtualization support
+core-$(CONFIG_XEN)		+= arch/i386/xen/
+
 # default subarch .h files
 mflags-y += -Iinclude/asm-i386/mach-default
 

arch/i386/boot/compressed/relocs.c

@@ -31,6 +31,8 @@ static const char* safe_abs_relocs[] = {
 		"__kernel_rt_sigreturn",
 		"__kernel_sigreturn",
 		"SYSENTER_RETURN",
+		"xen_irq_disable_direct_reloc",
+		"xen_save_fl_direct_reloc",
 };
 
 static int is_safe_abs_reloc(const char* sym_name)

arch/i386/kernel/asm-offsets.c

@@ -17,6 +17,8 @@
 #include <asm/thread_info.h>
 #include <asm/elf.h>
 
+#include <xen/interface/xen.h>
+
 #define DEFINE(sym, val) \
         asm volatile("\n->" #sym " %0 " #val : : "i" (val))
 
@@ -59,6 +61,7 @@ void foo(void)
 	OFFSET(TI_addr_limit, thread_info, addr_limit);
 	OFFSET(TI_restart_block, thread_info, restart_block);
 	OFFSET(TI_sysenter_return, thread_info, sysenter_return);
+	OFFSET(TI_cpu, thread_info, cpu);
 	BLANK();
 
 	OFFSET(GDS_size, Xgt_desc_struct, size);
@@ -115,4 +118,10 @@ void foo(void)
 	OFFSET(PARAVIRT_iret, paravirt_ops, iret);
 	OFFSET(PARAVIRT_read_cr0, paravirt_ops, read_cr0);
 #endif
+
+#ifdef CONFIG_XEN
+	BLANK();
+	OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask);
+	OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
+#endif
 }

arch/i386/kernel/entry.S

@@ -1023,6 +1023,91 @@ ENTRY(kernel_thread_helper)
 	CFI_ENDPROC
 ENDPROC(kernel_thread_helper)
 
+#ifdef CONFIG_XEN
+ENTRY(xen_hypervisor_callback)
+	CFI_STARTPROC
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+
+	/* Check to see if we got the event in the critical
+	   region in xen_iret_direct, after we've reenabled
+	   events and checked for pending events.  This simulates
+	   iret instruction's behaviour where it delivers a
+	   pending interrupt when enabling interrupts. */
+	movl PT_EIP(%esp),%eax
+	cmpl $xen_iret_start_crit,%eax
+	jb   1f
+	cmpl $xen_iret_end_crit,%eax
+	jae  1f
+
+	call xen_iret_crit_fixup
+
+1:	mov %esp, %eax
+	call xen_evtchn_do_upcall
+	jmp  ret_from_intr
+	CFI_ENDPROC
+ENDPROC(xen_hypervisor_callback)
+
+# Hypervisor uses this for application faults while it executes.
+# We get here for two reasons:
+#  1. Fault while reloading DS, ES, FS or GS
+#  2. Fault while executing IRET
+# Category 1 we fix up by reattempting the load, and zeroing the segment
+# register if the load fails.
+# Category 2 we fix up by jumping to do_iret_error. We cannot use the
+# normal Linux return path in this case because if we use the IRET hypercall
+# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+# We distinguish between categories by maintaining a status value in EAX.
+ENTRY(xen_failsafe_callback)
+	CFI_STARTPROC
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	movl $1,%eax
+1:	mov 4(%esp),%ds
+2:	mov 8(%esp),%es
+3:	mov 12(%esp),%fs
+4:	mov 16(%esp),%gs
+	testl %eax,%eax
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	lea 16(%esp),%esp
+	CFI_ADJUST_CFA_OFFSET -16
+	jz 5f
+	addl $16,%esp
+	jmp iret_exc		# EAX != 0 => Category 2 (Bad IRET)
+5:	pushl $0		# EAX == 0 => Category 1 (Bad segment)
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	jmp ret_from_exception
+	CFI_ENDPROC
+
+.section .fixup,"ax"
+6:	xorl %eax,%eax
+	movl %eax,4(%esp)
+	jmp 1b
+7:	xorl %eax,%eax
+	movl %eax,8(%esp)
+	jmp 2b
+8:	xorl %eax,%eax
+	movl %eax,12(%esp)
+	jmp 3b
+9:	xorl %eax,%eax
+	movl %eax,16(%esp)
+	jmp 4b
+.previous
+.section __ex_table,"a"
+	.align 4
+	.long 1b,6b
+	.long 2b,7b
+	.long 3b,8b
+	.long 4b,9b
+.previous
+ENDPROC(xen_failsafe_callback)
+
+#endif	/* CONFIG_XEN */
+
 .section .rodata,"a"
 #include "syscall_table.S"
 

arch/i386/kernel/head.S

@@ -510,7 +510,8 @@ ENTRY(_stext)
 /*
  * BSS section
  */
-.section ".bss.page_aligned","w"
+.section ".bss.page_aligned","wa"
+	.align PAGE_SIZE_asm
 ENTRY(swapper_pg_dir)
 	.fill 1024,4,0
 ENTRY(swapper_pg_pmd)
@@ -538,6 +539,8 @@ fault_msg:
 	.ascii "Int %d: CR2 %p  err %p  EIP %p  CS %p  flags %p\n"
 	.asciz "Stack: %p %p %p %p %p %p %p %p\n"
 
+#include "../xen/xen-head.S"
+
 /*
  * The IDT and GDT 'descriptors' are a strange 48-bit object
  * only used by the lidt and lgdt instructions. They are not

arch/i386/kernel/paravirt.c

@@ -228,6 +228,41 @@ static int __init print_banner(void)
 }
 core_initcall(print_banner);
 
+static struct resource reserve_ioports = {
+	.start = 0,
+	.end = IO_SPACE_LIMIT,
+	.name = "paravirt-ioport",
+	.flags = IORESOURCE_IO | IORESOURCE_BUSY,
+};
+
+static struct resource reserve_iomem = {
+	.start = 0,
+	.end = -1,
+	.name = "paravirt-iomem",
+	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
+
+/*
+ * Reserve the whole legacy IO space to prevent any legacy drivers
+ * from wasting time probing for their hardware.  This is a fairly
+ * brute-force approach to disabling all non-virtual drivers.
+ *
+ * Note that this must be called very early to have any effect.
+ */
+int paravirt_disable_iospace(void)
+{
+	int ret;
+
+	ret = request_resource(&ioport_resource, &reserve_ioports);
+	if (ret == 0) {
+		ret = request_resource(&iomem_resource, &reserve_iomem);
+		if (ret)
+			release_resource(&reserve_ioports);
+	}
+
+	return ret;
+}
+
 struct paravirt_ops paravirt_ops = {
 	.name = "bare hardware",
 	.paravirt_enabled = 0,
@@ -267,7 +302,7 @@ struct paravirt_ops paravirt_ops = {
 	.write_msr = native_write_msr_safe,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
-	.get_scheduled_cycles = native_read_tsc,
+	.sched_clock = native_sched_clock,
 	.get_cpu_khz = native_calculate_cpu_khz,
 	.load_tr_desc = native_load_tr_desc,
 	.set_ldt = native_set_ldt,

arch/i386/kernel/setup.c

@@ -601,6 +601,8 @@ void __init setup_arch(char **cmdline_p)
 	 * NOTE: at this point the bootmem allocator is fully available.
 	 */
 
+	paravirt_post_allocator_init();
+
 	dmi_scan_machine();
 
 #ifdef CONFIG_X86_GENERICARCH

arch/i386/kernel/smp.c

@@ -22,6 +22,7 @@
 
 #include <asm/mtrr.h>
 #include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
 #include <mach_apic.h>
 
 /*
@@ -255,7 +256,7 @@ static DEFINE_SPINLOCK(tlbstate_lock);
  * We need to reload %cr3 since the page tables may be going
  * away from under us..
  */
-static inline void leave_mm (unsigned long cpu)
+void leave_mm(unsigned long cpu)
 {
 	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
 		BUG();

arch/i386/kernel/smpboot.c

@@ -148,7 +148,7 @@ void __init smp_alloc_memory(void)
  * a given CPU
  */
 
-static void __cpuinit smp_store_cpu_info(int id)
+void __cpuinit smp_store_cpu_info(int id)
 {
 	struct cpuinfo_x86 *c = cpu_data + id;
 
@@ -308,8 +308,7 @@ cpumask_t cpu_coregroup_map(int cpu)
 /* representing cpus for which sibling maps can be computed */
 static cpumask_t cpu_sibling_setup_map;
 
-static inline void
-set_cpu_sibling_map(int cpu)
+void set_cpu_sibling_map(int cpu)
 {
 	int i;
 	struct cpuinfo_x86 *c = cpu_data;
@@ -1144,8 +1143,7 @@ void __init native_smp_prepare_boot_cpu(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static void
-remove_siblinginfo(int cpu)
+void remove_siblinginfo(int cpu)
 {
 	int sibling;
 	struct cpuinfo_x86 *c = cpu_data;

arch/i386/kernel/tsc.c

@@ -84,7 +84,7 @@ static inline int check_tsc_unstable(void)
  *
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
  */
-static unsigned long cyc2ns_scale __read_mostly;
+unsigned long cyc2ns_scale __read_mostly;
 
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
@@ -93,15 +93,10 @@ static inline void set_cyc2ns_scale(unsigned long cpu_khz)
 	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
-	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
-unsigned long long sched_clock(void)
+unsigned long long native_sched_clock(void)
 {
 	unsigned long long this_offset;
 
@@ -118,12 +113,24 @@ unsigned long long sched_clock(void)
 		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
 
 	/* read the Time Stamp Counter: */
-	get_scheduled_cycles(this_offset);
+	rdtscll(this_offset);
 
 	/* return the value in ns */
 	return cycles_2_ns(this_offset);
 }
 
+/* We need to define a real function for sched_clock, to override the
+   weak default version */
+#ifdef CONFIG_PARAVIRT
+unsigned long long sched_clock(void)
+{
+	return paravirt_sched_clock();
+}
+#else
+unsigned long long sched_clock(void)
+	__attribute__((alias("native_sched_clock")));
+#endif
+
 unsigned long native_calculate_cpu_khz(void)
 {
 	unsigned long long start, end;

arch/i386/kernel/vmi.c

@@ -362,7 +362,7 @@ static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type)
 }
 #endif
 
-static void vmi_allocate_pt(u32 pfn)
+static void vmi_allocate_pt(struct mm_struct *mm, u32 pfn)
 {
 	vmi_set_page_type(pfn, VMI_PAGE_L1);
 	vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
@@ -891,7 +891,7 @@ static inline int __init activate_vmi(void)
 		paravirt_ops.setup_boot_clock = vmi_time_bsp_init;
 		paravirt_ops.setup_secondary_clock = vmi_time_ap_init;
 #endif
-		paravirt_ops.get_scheduled_cycles = vmi_get_sched_cycles;
+		paravirt_ops.sched_clock = vmi_sched_clock;
  		paravirt_ops.get_cpu_khz = vmi_cpu_khz;
 
 		/* We have true wallclock functions; disable CMOS clock sync */

arch/i386/kernel/vmiclock.c

@@ -64,10 +64,10 @@ int vmi_set_wallclock(unsigned long now)
 	return 0;
 }
 
-/* paravirt_ops.get_scheduled_cycles = vmi_get_sched_cycles */
-unsigned long long vmi_get_sched_cycles(void)
+/* paravirt_ops.sched_clock = vmi_sched_clock */
+unsigned long long vmi_sched_clock(void)
 {
-	return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE);
+	return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE));
 }
 
 /* paravirt_ops.get_cpu_khz = vmi_cpu_khz */

arch/i386/kernel/vmlinux.lds.S

@@ -88,6 +88,7 @@ SECTIONS
 
   . = ALIGN(4096);
   .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+	*(.data.page_aligned)
 	*(.data.idt)
   }
 

arch/i386/kernel/vsyscall-note.S

@@ -3,23 +3,40 @@
  * Here we can supply some information useful to userland.
  */
 
-#include <linux/uts.h>
 #include <linux/version.h>
+#include <linux/elfnote.h>
 
-#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type)			      \
-	.section name, flags;						      \
-	.balign 4;							      \
-	.long 1f - 0f;		/* name length */			      \
-	.long 3f - 2f;		/* data length */			      \
-	.long type;		/* note type */				      \
-0:	.asciz vendor;		/* vendor name */			      \
-1:	.balign 4;							      \
-2:
+/* Ideally this would use UTS_NAME, but using a quoted string here
+   doesn't work. Remember to change this when changing the
+   kernel's name. */
+ELFNOTE_START(Linux, 0, "a")
+	.long LINUX_VERSION_CODE
+ELFNOTE_END
 
-#define ASM_ELF_NOTE_END						      \
-3:	.balign 4;		/* pad out section */			      \
-	.previous
+#ifdef CONFIG_XEN
 
-	ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
-	.long LINUX_VERSION_CODE
-	ASM_ELF_NOTE_END
+/*
+ * Add a special note telling glibc's dynamic linker a fake hardware
+ * flavor that it will use to choose the search path for libraries in the
+ * same way it uses real hardware capabilities like "mmx".
+ * We supply "nosegneg" as the fake capability, to indicate that we
+ * do not like negative offsets in instructions using segment overrides,
+ * since we implement those inefficiently.  This makes it possible to
+ * install libraries optimized to avoid those access patterns in someplace
+ * like /lib/i686/tls/nosegneg.  Note that an /etc/ld.so.conf.d/file
+ * corresponding to the bits here is needed to make ldconfig work right.
+ * It should contain:
+ *	hwcap 1 nosegneg
+ * to match the mapping of bit to name that we give here.
+ */
+
+/* Bit used for the pseudo-hwcap for non-negative segments.  We use
+   bit 1 to avoid bugs in some versions of glibc when bit 0 is
+   used; the choice is otherwise arbitrary. */
+#define VDSO_NOTE_NONEGSEG_BIT	1
+
+ELFNOTE_START(GNU, 2, "a")
+	.long 1, 1<<VDSO_NOTE_NONEGSEG_BIT		/* ncaps, mask */
+	.byte VDSO_NOTE_NONEGSEG_BIT; .asciz "nosegneg"	/* bit, name */
+ELFNOTE_END
+#endif

arch/i386/mach-voyager/voyager_thread.c

@@ -52,7 +52,7 @@ execute(const char *string)
 		NULL,
 	};
 
-	if ((ret = call_usermodehelper(argv[0], argv, envp, 1)) != 0) {
+	if ((ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC)) != 0) {
 		printk(KERN_ERR "Voyager failed to run \"%s\": %i\n",
 		       string, ret);
 	}

arch/i386/mm/init.c

@@ -87,7 +87,7 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)
 	if (!(pmd_val(*pmd) & _PAGE_PRESENT)) {
 		pte_t *page_table = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
 
-		paravirt_alloc_pt(__pa(page_table) >> PAGE_SHIFT);
+		paravirt_alloc_pt(&init_mm, __pa(page_table) >> PAGE_SHIFT);
 		set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE));
 		BUG_ON(page_table != pte_offset_kernel(pmd, 0));
 	}
@@ -473,6 +473,7 @@ void zap_low_mappings (void)
 
 static int disable_nx __initdata = 0;
 u64 __supported_pte_mask __read_mostly = ~_PAGE_NX;
+EXPORT_SYMBOL_GPL(__supported_pte_mask);
 
 /*
  * noexec = on|off

arch/i386/mm/pageattr.c

@@ -60,7 +60,7 @@ static struct page *split_large_page(unsigned long address, pgprot_t prot,
 	address = __pa(address);
 	addr = address & LARGE_PAGE_MASK; 
 	pbase = (pte_t *)page_address(base);
-	paravirt_alloc_pt(page_to_pfn(base));
+	paravirt_alloc_pt(&init_mm, page_to_pfn(base));
 	for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) {
                set_pte(&pbase[i], pfn_pte(addr >> PAGE_SHIFT,
                                           addr == address ? prot : ref_prot));

arch/i386/xen/Kconfig

+#
+# This Kconfig describes xen options
+#
+
+config XEN
+	bool "Enable support for Xen hypervisor"
+	depends on PARAVIRT && X86_CMPXCHG && X86_TSC && !NEED_MULTIPLE_NODES
+	help
+	  This is the Linux Xen port.  Enabling this will allow the
+	  kernel to boot in a paravirtualized environment under the
+	  Xen hypervisor.

arch/i386/xen/Makefile

+obj-y		:= enlighten.o setup.o features.o multicalls.o mmu.o \
+			events.o time.o manage.o xen-asm.o
+
+obj-$(CONFIG_SMP)	+= smp.o

arch/i386/xen/features.c

+/******************************************************************************
+ * features.c
+ *
+ * Xen feature flags.
+ *
+ * Copyright (c) 2006, Ian Campbell, XenSource Inc.
+ */
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/module.h>
+#include <asm/xen/hypervisor.h>
+#include <xen/features.h>
+
+u8 xen_features[XENFEAT_NR_SUBMAPS * 32] __read_mostly;
+EXPORT_SYMBOL_GPL(xen_features);
+
+void xen_setup_features(void)
+{
+	struct xen_feature_info fi;
+	int i, j;
+
+	for (i = 0; i < XENFEAT_NR_SUBMAPS; i++) {
+		fi.submap_idx = i;
+		if (HYPERVISOR_xen_version(XENVER_get_features, &fi) < 0)
+			break;
+		for (j = 0; j < 32; j++)
+			xen_features[i * 32 + j] = !!(fi.submap & 1<<j);
+	}
+}

arch/i386/xen/manage.c

+/*
+ * Handle extern requests for shutdown, reboot and sysrq
+ */
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/reboot.h>
+#include <linux/sysrq.h>
+
+#include <xen/xenbus.h>
+
+#define SHUTDOWN_INVALID  -1
+#define SHUTDOWN_POWEROFF  0
+#define SHUTDOWN_SUSPEND   2
+/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only
+ * report a crash, not be instructed to crash!
+ * HALT is the same as POWEROFF, as far as we're concerned.  The tools use
+ * the distinction when we return the reason code to them.
+ */
+#define SHUTDOWN_HALT      4
+
+/* Ignore multiple shutdown requests. */
+static int shutting_down = SHUTDOWN_INVALID;
+
+static void shutdown_handler(struct xenbus_watch *watch,
+			     const char **vec, unsigned int len)
+{
+	char *str;
+	struct xenbus_transaction xbt;
+	int err;
+
+	if (shutting_down != SHUTDOWN_INVALID)
+		return;
+
+ again:
+	err = xenbus_transaction_start(&xbt);
+	if (err)
+		return;
+
+	str = (char *)xenbus_read(xbt, "control", "shutdown", NULL);
+	/* Ignore read errors and empty reads. */
+	if (XENBUS_IS_ERR_READ(str)) {
+		xenbus_transaction_end(xbt, 1);
+		return;
+	}
+
+	xenbus_write(xbt, "control", "shutdown", "");
+
+	err = xenbus_transaction_end(xbt, 0);
+	if (err == -EAGAIN) {
+		kfree(str);
+		goto again;
+	}
+
+	if (strcmp(str, "poweroff") == 0 ||
+	    strcmp(str, "halt") == 0)
+		orderly_poweroff(false);
+	else if (strcmp(str, "reboot") == 0)
+		ctrl_alt_del();
+	else {
+		printk(KERN_INFO "Ignoring shutdown request: %s\n", str);
+		shutting_down = SHUTDOWN_INVALID;
+	}
+
+	kfree(str);
+}
+
+static void sysrq_handler(struct xenbus_watch *watch, const char **vec,
+			  unsigned int len)
+{
+	char sysrq_key = '\0';
+	struct xenbus_transaction xbt;
+	int err;
+
+ again:
+	err = xenbus_transaction_start(&xbt);
+	if (err)
+		return;
+	if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) {
+		printk(KERN_ERR "Unable to read sysrq code in "
+		       "control/sysrq\n");
+		xenbus_transaction_end(xbt, 1);
+		return;
+	}
+
+	if (sysrq_key != '\0')
+		xenbus_printf(xbt, "control", "sysrq", "%c", '\0');
+
+	err = xenbus_transaction_end(xbt, 0);
+	if (err == -EAGAIN)
+		goto again;
+
+	if (sysrq_key != '\0')
+		handle_sysrq(sysrq_key, NULL);
+}
+
+static struct xenbus_watch shutdown_watch = {
+	.node = "control/shutdown",
+	.callback = shutdown_handler
+};
+
+static struct xenbus_watch sysrq_watch = {
+	.node = "control/sysrq",
+	.callback = sysrq_handler
+};
+
+static int setup_shutdown_watcher(void)
+{
+	int err;
+
+	err = register_xenbus_watch(&shutdown_watch);
+	if (err) {
+		printk(KERN_ERR "Failed to set shutdown watcher\n");
+		return err;
+	}
+
+	err = register_xenbus_watch(&sysrq_watch);
+	if (err) {
+		printk(KERN_ERR "Failed to set sysrq watcher\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int shutdown_event(struct notifier_block *notifier,
+			  unsigned long event,
+			  void *data)
+{
+	setup_shutdown_watcher();
+	return NOTIFY_DONE;
+}
+
+static int __init setup_shutdown_event(void)
+{
+	static struct notifier_block xenstore_notifier = {
+		.notifier_call = shutdown_event
+	};
+	register_xenstore_notifier(&xenstore_notifier);
+
+	return 0;
+}
+
+subsys_initcall(setup_shutdown_event);

arch/i386/xen/mmu.h

+#ifndef _XEN_MMU_H
+
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+/*
+ * Page-directory addresses above 4GB do not fit into architectural %cr3.
+ * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
+ * must use the following accessor macros to pack/unpack valid MFNs.
+ *
+ * Note that Xen is using the fact that the pagetable base is always
+ * page-aligned, and putting the 12 MSB of the address into the 12 LSB
+ * of cr3.
+ */
+#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
+#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
+
+
+void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
+
+void xen_set_pte(pte_t *ptep, pte_t pteval);
+void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
+		    pte_t *ptep, pte_t pteval);
+void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval);
+
+void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next);
+void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm);
+void xen_exit_mmap(struct mm_struct *mm);
+
+void xen_pgd_pin(pgd_t *pgd);
+//void xen_pgd_unpin(pgd_t *pgd);
+
+#ifdef CONFIG_X86_PAE
+unsigned long long xen_pte_val(pte_t);
+unsigned long long xen_pmd_val(pmd_t);
+unsigned long long xen_pgd_val(pgd_t);
+
+pte_t xen_make_pte(unsigned long long);
+pmd_t xen_make_pmd(unsigned long long);
+pgd_t xen_make_pgd(unsigned long long);
+
+void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
+		    pte_t *ptep, pte_t pteval);
+void xen_set_pte_atomic(pte_t *ptep, pte_t pte);
+void xen_set_pud(pud_t *ptr, pud_t val);
+void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+void xen_pmd_clear(pmd_t *pmdp);
+
+
+#else
+unsigned long xen_pte_val(pte_t);
+unsigned long xen_pmd_val(pmd_t);
+unsigned long xen_pgd_val(pgd_t);
+
+pte_t xen_make_pte(unsigned long);
+pmd_t xen_make_pmd(unsigned long);
+pgd_t xen_make_pgd(unsigned long);
+#endif
+
+#endif	/* _XEN_MMU_H */

arch/i386/xen/multicalls.c

+/*
+ * Xen hypercall batching.
+ *
+ * Xen allows multiple hypercalls to be issued at once, using the
+ * multicall interface.  This allows the cost of trapping into the
+ * hypervisor to be amortized over several calls.
+ *
+ * This file implements a simple interface for multicalls.  There's a
+ * per-cpu buffer of outstanding multicalls.  When you want to queue a
+ * multicall for issuing, you can allocate a multicall slot for the
+ * call and its arguments, along with storage for space which is
+ * pointed to by the arguments (for passing pointers to structures,
+ * etc).  When the multicall is actually issued, all the space for the
+ * commands and allocated memory is freed for reuse.
+ *
+ * Multicalls are flushed whenever any of the buffers get full, or
+ * when explicitly requested.  There's no way to get per-multicall
+ * return results back.  It will BUG if any of the multicalls fail.
+ *
+ * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
+ */
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+
+#include <asm/xen/hypercall.h>
+
+#include "multicalls.h"
+
+#define MC_BATCH	32
+#define MC_ARGS		(MC_BATCH * 16 / sizeof(u64))
+
+struct mc_buffer {
+	struct multicall_entry entries[MC_BATCH];
+	u64 args[MC_ARGS];
+	unsigned mcidx, argidx;
+};
+
+static DEFINE_PER_CPU(struct mc_buffer, mc_buffer);
+DEFINE_PER_CPU(unsigned long, xen_mc_irq_flags);
+
+void xen_mc_flush(void)
+{
+	struct mc_buffer *b = &__get_cpu_var(mc_buffer);
+	int ret = 0;
+	unsigned long flags;
+
+	BUG_ON(preemptible());
+
+	/* Disable interrupts in case someone comes in and queues
+	   something in the middle */
+	local_irq_save(flags);
+
+	if (b->mcidx) {
+		int i;
+
+		if (HYPERVISOR_multicall(b->entries, b->mcidx) != 0)
+			BUG();
+		for (i = 0; i < b->mcidx; i++)
+			if (b->entries[i].result < 0)
+				ret++;
+		b->mcidx = 0;
+		b->argidx = 0;
+	} else
+		BUG_ON(b->argidx != 0);
+
+	local_irq_restore(flags);
+
+	BUG_ON(ret);
+}
+
+struct multicall_space __xen_mc_entry(size_t args)
+{
+	struct mc_buffer *b = &__get_cpu_var(mc_buffer);
+	struct multicall_space ret;
+	unsigned argspace = (args + sizeof(u64) - 1) / sizeof(u64);
+
+	BUG_ON(preemptible());
+	BUG_ON(argspace > MC_ARGS);
+
+	if (b->mcidx == MC_BATCH ||
+	    (b->argidx + argspace) > MC_ARGS)
+		xen_mc_flush();
+
+	ret.mc = &b->entries[b->mcidx];
+	b->mcidx++;
+	ret.args = &b->args[b->argidx];
+	b->argidx += argspace;
+
+	return ret;
+}

arch/i386/xen/multicalls.h

+#ifndef _XEN_MULTICALLS_H
+#define _XEN_MULTICALLS_H
+
+#include "xen-ops.h"
+
+/* Multicalls */
+struct multicall_space
+{
+	struct multicall_entry *mc;
+	void *args;
+};
+
+/* Allocate room for a multicall and its args */
+struct multicall_space __xen_mc_entry(size_t args);
+
+DECLARE_PER_CPU(unsigned long, xen_mc_irq_flags);
+
+/* Call to start a batch of multiple __xen_mc_entry()s.  Must be
+   paired with xen_mc_issue() */
+static inline void xen_mc_batch(void)
+{
+	/* need to disable interrupts until this entry is complete */
+	local_irq_save(__get_cpu_var(xen_mc_irq_flags));
+}
+
+static inline struct multicall_space xen_mc_entry(size_t args)
+{
+	xen_mc_batch();
+	return __xen_mc_entry(args);
+}
+
+/* Flush all pending multicalls */
+void xen_mc_flush(void);
+
+/* Issue a multicall if we're not in a lazy mode */
+static inline void xen_mc_issue(unsigned mode)
+{
+	if ((xen_get_lazy_mode() & mode) == 0)
+		xen_mc_flush();
+
+	/* restore flags saved in xen_mc_batch */
+	local_irq_restore(x86_read_percpu(xen_mc_irq_flags));
+}
+
+#endif /* _XEN_MULTICALLS_H */

arch/i386/xen/setup.c

+/*
+ * Machine specific setup for xen
+ *
+ * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/pm.h>
+
+#include <asm/elf.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/hypercall.h>
+
+#include <xen/interface/physdev.h>
+#include <xen/features.h>
+
+#include "xen-ops.h"
+
+/* These are code, but not functions.  Defined in entry.S */
+extern const char xen_hypervisor_callback[];
+extern const char xen_failsafe_callback[];
+
+unsigned long *phys_to_machine_mapping;
+EXPORT_SYMBOL(phys_to_machine_mapping);
+
+/**
+ * machine_specific_memory_setup - Hook for machine specific memory setup.
+ **/
+
+char * __init xen_memory_setup(void)
+{
+	unsigned long max_pfn = xen_start_info->nr_pages;
+
+	e820.nr_map = 0;
+	add_memory_region(0, PFN_PHYS(max_pfn), E820_RAM);
+
+	return "Xen";
+}
+
+static void xen_idle(void)
+{
+	local_irq_disable();
+
+	if (need_resched())
+		local_irq_enable();
+	else {
+		current_thread_info()->status &= ~TS_POLLING;
+		smp_mb__after_clear_bit();
+		safe_halt();
+		current_thread_info()->status |= TS_POLLING;
+	}
+}
+
+void __init xen_arch_setup(void)
+{
+	struct physdev_set_iopl set_iopl;
+	int rc;
+
+	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
+	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);
+
+	if (!xen_feature(XENFEAT_auto_translated_physmap))
+		HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_pae_extended_cr3);
+
+	HYPERVISOR_set_callbacks(__KERNEL_CS, (unsigned long)xen_hypervisor_callback,
+				 __KERNEL_CS, (unsigned long)xen_failsafe_callback);
+
+	set_iopl.iopl = 1;
+	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
+	if (rc != 0)
+		printk(KERN_INFO "physdev_op failed %d\n", rc);
+
+#ifdef CONFIG_ACPI
+	if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
+		printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
+		disable_acpi();
+	}
+#endif
+
+	memcpy(boot_command_line, xen_start_info->cmd_line,
+	       MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
+	       COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
+
+	pm_idle = xen_idle;
+
+#ifdef CONFIG_SMP
+	/* fill cpus_possible with all available cpus */
+	xen_fill_possible_map();
+#endif
+
+	paravirt_disable_iospace();
+}

arch/i386/xen/smp.c

+/*
+ * Xen SMP support
+ *
+ * This file implements the Xen versions of smp_ops.  SMP under Xen is
+ * very straightforward.  Bringing a CPU up is simply a matter of
+ * loading its initial context and setting it running.
+ *
+ * IPIs are handled through the Xen event mechanism.
+ *
+ * Because virtual CPUs can be scheduled onto any real CPU, there's no
+ * useful topology information for the kernel to make use of.  As a
+ * result, all CPUs are treated as if they're single-core and
+ * single-threaded.
+ *
+ * This does not handle HOTPLUG_CPU yet.
+ */
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/smp.h>
+
+#include <asm/paravirt.h>
+#include <asm/desc.h>
+#include <asm/pgtable.h>
+#include <asm/cpu.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/vcpu.h>
+
+#include <asm/xen/interface.h>
+#include <asm/xen/hypercall.h>
+
+#include <xen/page.h>
+#include <xen/events.h>
+
+#include "xen-ops.h"
+#include "mmu.h"
+
+static cpumask_t cpu_initialized_map;
+static DEFINE_PER_CPU(int, resched_irq);
+static DEFINE_PER_CPU(int, callfunc_irq);
+
+/*
+ * Structure and data for smp_call_function(). This is designed to minimise
+ * static memory requirements. It also looks cleaner.
+ */
+static DEFINE_SPINLOCK(call_lock);
+
+struct call_data_struct {
+	void (*func) (void *info);
+	void *info;
+	atomic_t started;
+	atomic_t finished;
+	int wait;
+};
+
+static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id);
+
+static struct call_data_struct *call_data;
+
+/*
+ * Reschedule call back. Nothing to do,
+ * all the work is done automatically when
+ * we return from the interrupt.
+ */
+static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static __cpuinit void cpu_bringup_and_idle(void)
+{
+	int cpu = smp_processor_id();
+
+	cpu_init();
+
+	preempt_disable();
+	per_cpu(cpu_state, cpu) = CPU_ONLINE;
+
+	xen_setup_cpu_clockevents();
+
+	/* We can take interrupts now: we're officially "up". */
+	local_irq_enable();
+
+	wmb();			/* make sure everything is out */
+	cpu_idle();
+}
+
+static int xen_smp_intr_init(unsigned int cpu)
+{
+	int rc;
+	const char *resched_name, *callfunc_name;
+
+	per_cpu(resched_irq, cpu) = per_cpu(callfunc_irq, cpu) = -1;
+
+	resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu);
+	rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR,
+				    cpu,
+				    xen_reschedule_interrupt,
+				    IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				    resched_name,
+				    NULL);
+	if (rc < 0)
+		goto fail;
+	per_cpu(resched_irq, cpu) = rc;
+
+	callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu);
+	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR,
+				    cpu,
+				    xen_call_function_interrupt,
+				    IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				    callfunc_name,
+				    NULL);
+	if (rc < 0)
+		goto fail;
+	per_cpu(callfunc_irq, cpu) = rc;
+
+	return 0;
+
+ fail:
+	if (per_cpu(resched_irq, cpu) >= 0)
+		unbind_from_irqhandler(per_cpu(resched_irq, cpu), NULL);
+	if (per_cpu(callfunc_irq, cpu) >= 0)
+		unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL);
+	return rc;
+}
+
+void __init xen_fill_possible_map(void)
+{
+	int i, rc;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
+		if (rc >= 0)
+			cpu_set(i, cpu_possible_map);
+	}
+}
+
+void __init xen_smp_prepare_boot_cpu(void)
+{
+	int cpu;
+
+	BUG_ON(smp_processor_id() != 0);
+	native_smp_prepare_boot_cpu();
+
+	/* We've switched to the "real" per-cpu gdt, so make sure the
+	   old memory can be recycled */
+	make_lowmem_page_readwrite(&per_cpu__gdt_page);
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		cpus_clear(cpu_sibling_map[cpu]);
+		cpus_clear(cpu_core_map[cpu]);
+	}
+
+	xen_setup_vcpu_info_placement();
+}
+
+void __init xen_smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned cpu;
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		cpus_clear(cpu_sibling_map[cpu]);
+		cpus_clear(cpu_core_map[cpu]);
+	}
+
+	smp_store_cpu_info(0);
+	set_cpu_sibling_map(0);
+
+	if (xen_smp_intr_init(0))
+		BUG();
+
+	cpu_initialized_map = cpumask_of_cpu(0);
+
+	/* Restrict the possible_map according to max_cpus. */
+	while ((num_possible_cpus() > 1) && (num_possible_cpus() > max_cpus)) {
+		for (cpu = NR_CPUS-1; !cpu_isset(cpu, cpu_possible_map); cpu--)
+			continue;
+		cpu_clear(cpu, cpu_possible_map);
+	}
+
+	for_each_possible_cpu (cpu) {
+		struct task_struct *idle;
+
+		if (cpu == 0)
+			continue;
+
+		idle = fork_idle(cpu);
+		if (IS_ERR(idle))
+			panic("failed fork for CPU %d", cpu);
+
+		cpu_set(cpu, cpu_present_map);
+	}
+
+	//init_xenbus_allowed_cpumask();
+}
+
+static __cpuinit int
+cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
+{
+	struct vcpu_guest_context *ctxt;
+	struct gdt_page *gdt = &per_cpu(gdt_page, cpu);
+
+	if (cpu_test_and_set(cpu, cpu_initialized_map))
+		return 0;
+
+	ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL);
+	if (ctxt == NULL)
+		return -ENOMEM;
+
+	ctxt->flags = VGCF_IN_KERNEL;
+	ctxt->user_regs.ds = __USER_DS;
+	ctxt->user_regs.es = __USER_DS;
+	ctxt->user_regs.fs = __KERNEL_PERCPU;
+	ctxt->user_regs.gs = 0;
+	ctxt->user_regs.ss = __KERNEL_DS;
+	ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
+	ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
+
+	memset(&ctxt->fpu_ctxt, 0, sizeof(ctxt->fpu_ctxt));
+
+	xen_copy_trap_info(ctxt->trap_ctxt);
+
+	ctxt->ldt_ents = 0;
+
+	BUG_ON((unsigned long)gdt->gdt & ~PAGE_MASK);
+	make_lowmem_page_readonly(gdt->gdt);
+
+	ctxt->gdt_frames[0] = virt_to_mfn(gdt->gdt);
+	ctxt->gdt_ents      = ARRAY_SIZE(gdt->gdt);
+
+	ctxt->user_regs.cs = __KERNEL_CS;
+	ctxt->user_regs.esp = idle->thread.esp0 - sizeof(struct pt_regs);
+
+	ctxt->kernel_ss = __KERNEL_DS;
+	ctxt->kernel_sp = idle->thread.esp0;
+
+	ctxt->event_callback_cs     = __KERNEL_CS;
+	ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
+	ctxt->failsafe_callback_cs  = __KERNEL_CS;
+	ctxt->failsafe_callback_eip = (unsigned long)xen_failsafe_callback;
+
+	per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
+	ctxt->ctrlreg[3] = xen_pfn_to_cr3(virt_to_mfn(swapper_pg_dir));
+
+	if (HYPERVISOR_vcpu_op(VCPUOP_initialise, cpu, ctxt))
+		BUG();
+
+	kfree(ctxt);
+	return 0;
+}
+
+int __cpuinit xen_cpu_up(unsigned int cpu)
+{
+	struct task_struct *idle = idle_task(cpu);
+	int rc;
+
+#if 0
+	rc = cpu_up_check(cpu);
+	if (rc)
+		return rc;
+#endif
+
+	init_gdt(cpu);
+	per_cpu(current_task, cpu) = idle;
+	irq_ctx_init(cpu);
+	xen_setup_timer(cpu);
+
+	/* make sure interrupts start blocked */
+	per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;
+
+	rc = cpu_initialize_context(cpu, idle);
+	if (rc)
+		return rc;
+
+	if (num_online_cpus() == 1)
+		alternatives_smp_switch(1);
+
+	rc = xen_smp_intr_init(cpu);
+	if (rc)
+		return rc;
+
+	smp_store_cpu_info(cpu);
+	set_cpu_sibling_map(cpu);
+	/* This must be done before setting cpu_online_map */
+	wmb();
+
+	cpu_set(cpu, cpu_online_map);
+
+	rc = HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL);
+	BUG_ON(rc);
+
+	return 0;
+}
+
+void xen_smp_cpus_done(unsigned int max_cpus)
+{
+}
+
+static void stop_self(void *v)
+{
+	int cpu = smp_processor_id();
+
+	/* make sure we're not pinning something down */
+	load_cr3(swapper_pg_dir);
+	/* should set up a minimal gdt */
+
+	HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL);
+	BUG();
+}
+
+void xen_smp_send_stop(void)
+{
+	smp_call_function(stop_self, NULL, 0, 0);
+}
+
+void xen_smp_send_reschedule(int cpu)
+{
+	xen_send_IPI_one(cpu, XEN_RESCHEDULE_VECTOR);
+}
+
+
+static void xen_send_IPI_mask(cpumask_t mask, enum ipi_vector vector)
+{
+	unsigned cpu;
+
+	cpus_and(mask, mask, cpu_online_map);
+
+	for_each_cpu_mask(cpu, mask)
+		xen_send_IPI_one(cpu, vector);
+}
+
+static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id)
+{
+	void (*func) (void *info) = call_data->func;
+	void *info = call_data->info;
+	int wait = call_data->wait;
+
+	/*
+	 * Notify initiating CPU that I've grabbed the data and am
+	 * about to execute the function
+	 */
+	mb();
+	atomic_inc(&call_data->started);
+	/*
+	 * At this point the info structure may be out of scope unless wait==1
+	 */
+	irq_enter();
+	(*func)(info);
+	irq_exit();
+
+	if (wait) {
+		mb();		/* commit everything before setting finished */
+		atomic_inc(&call_data->finished);
+	}
+
+	return IRQ_HANDLED;
+}
+
+int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *),
+			       void *info, int wait)
+{
+	struct call_data_struct data;
+	int cpus;
+
+	/* Holding any lock stops cpus from going down. */
+	spin_lock(&call_lock);
+
+	cpu_clear(smp_processor_id(), mask);
+
+	cpus = cpus_weight(mask);
+	if (!cpus) {
+		spin_unlock(&call_lock);
+		return 0;
+	}
+
+	/* Can deadlock when called with interrupts disabled */
+	WARN_ON(irqs_disabled());
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	call_data = &data;
+	mb();			/* write everything before IPI */
+
+	/* Send a message to other CPUs and wait for them to respond */
+	xen_send_IPI_mask(mask, XEN_CALL_FUNCTION_VECTOR);
+
+	/* Make sure other vcpus get a chance to run.
+	   XXX too severe?  Maybe we should check the other CPU's states? */
+	HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus ||
+	       (wait && atomic_read(&data.finished) != cpus))
+		cpu_relax();
+
+	spin_unlock(&call_lock);
+
+	return 0;
+}

arch/i386/xen/xen-asm.S

+/*
+	Asm versions of Xen pv-ops, suitable for either direct use or inlining.
+	The inline versions are the same as the direct-use versions, with the
+	pre- and post-amble chopped off.
+
+	This code is encoded for size rather than absolute efficiency,
+	with a view to being able to inline as much as possible.
+
+	We only bother with direct forms (ie, vcpu in pda) of the operations
+	here; the indirect forms are better handled in C, since they're
+	generally too large to inline anyway.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/percpu.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+#include <xen/interface/xen.h>
+
+#define RELOC(x, v)	.globl x##_reloc; x##_reloc=v
+#define ENDPATCH(x)	.globl x##_end; x##_end=.
+
+/* Pseudo-flag used for virtual NMI, which we don't implement yet */
+#define XEN_EFLAGS_NMI	0x80000000
+
+/*
+	Enable events.  This clears the event mask and tests the pending
+	event status with one and operation.  If there are pending
+	events, then enter the hypervisor to get them handled.
+ */
+ENTRY(xen_irq_enable_direct)
+	/* Clear mask and test pending */
+	andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+	jz 1f
+2:	call check_events
+1:
+ENDPATCH(xen_irq_enable_direct)
+	ret
+	ENDPROC(xen_irq_enable_direct)
+	RELOC(xen_irq_enable_direct, 2b+1)
+
+
+/*
+	Disabling events is simply a matter of making the event mask
+	non-zero.
+ */
+ENTRY(xen_irq_disable_direct)
+	movb $1, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+ENDPATCH(xen_irq_disable_direct)
+	ret
+	ENDPROC(xen_irq_disable_direct)
+	RELOC(xen_irq_disable_direct, 0)
+
+/*
+	(xen_)save_fl is used to get the current interrupt enable status.
+	Callers expect the status to be in X86_EFLAGS_IF, and other bits
+	may be set in the return value.  We take advantage of this by
+	making sure that X86_EFLAGS_IF has the right value (and other bits
+	in that byte are 0), but other bits in the return value are
+	undefined.  We need to toggle the state of the bit, because
+	Xen and x86 use opposite senses (mask vs enable).
+ */
+ENTRY(xen_save_fl_direct)
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+	setz %ah
+	addb %ah,%ah
+ENDPATCH(xen_save_fl_direct)
+	ret
+	ENDPROC(xen_save_fl_direct)
+	RELOC(xen_save_fl_direct, 0)
+
+
+/*
+	In principle the caller should be passing us a value return
+	from xen_save_fl_direct, but for robustness sake we test only
+	the X86_EFLAGS_IF flag rather than the whole byte. After
+	setting the interrupt mask state, it checks for unmasked
+	pending events and enters the hypervisor to get them delivered
+	if so.
+ */
+ENTRY(xen_restore_fl_direct)
+	testb $X86_EFLAGS_IF>>8, %ah
+	setz PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* check for unmasked and pending */
+	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+	jz 1f
+2:	call check_events
+1:
+ENDPATCH(xen_restore_fl_direct)
+	ret
+	ENDPROC(xen_restore_fl_direct)
+	RELOC(xen_restore_fl_direct, 2b+1)
+
+/*
+	This is run where a normal iret would be run, with the same stack setup:
+	      8: eflags
+	      4: cs
+	esp-> 0: eip
+
+	This attempts to make sure that any pending events are dealt
+	with on return to usermode, but there is a small window in
+	which an event can happen just before entering usermode.  If
+	the nested interrupt ends up setting one of the TIF_WORK_MASK
+	pending work flags, they will not be tested again before
+	returning to usermode. This means that a process can end up
+	with pending work, which will be unprocessed until the process
+	enters and leaves the kernel again, which could be an
+	unbounded amount of time.  This means that a pending signal or
+	reschedule event could be indefinitely delayed.
+
+	The fix is to notice a nested interrupt in the critical
+	window, and if one occurs, then fold the nested interrupt into
+	the current interrupt stack frame, and re-process it
+	iteratively rather than recursively.  This means that it will
+	exit via the normal path, and all pending work will be dealt
+	with appropriately.
+
+	Because the nested interrupt handler needs to deal with the
+	current stack state in whatever form its in, we keep things
+	simple by only using a single register which is pushed/popped
+	on the stack.
+
+	Non-direct iret could be done in the same way, but it would
+	require an annoying amount of code duplication.  We'll assume
+	that direct mode will be the common case once the hypervisor
+	support becomes commonplace.
+ */
+ENTRY(xen_iret_direct)
+	/* test eflags for special cases */
+	testl $(X86_EFLAGS_VM | XEN_EFLAGS_NMI), 8(%esp)
+	jnz hyper_iret
+
+	push %eax
+	ESP_OFFSET=4	# bytes pushed onto stack
+
+	/* Store vcpu_info pointer for easy access.  Do it this
+	   way to avoid having to reload %fs */
+#ifdef CONFIG_SMP
+	GET_THREAD_INFO(%eax)
+	movl TI_cpu(%eax),%eax
+	movl __per_cpu_offset(,%eax,4),%eax
+	lea per_cpu__xen_vcpu_info(%eax),%eax
+#else
+	movl $per_cpu__xen_vcpu_info, %eax
+#endif
+
+	/* check IF state we're restoring */
+	testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp)
+
+	/* Maybe enable events.  Once this happens we could get a
+	   recursive event, so the critical region starts immediately
+	   afterwards.  However, if that happens we don't end up
+	   resuming the code, so we don't have to be worried about
+	   being preempted to another CPU. */
+	setz XEN_vcpu_info_mask(%eax)
+xen_iret_start_crit:
+
+	/* check for unmasked and pending */
+	cmpw $0x0001, XEN_vcpu_info_pending(%eax)
+
+	/* If there's something pending, mask events again so we
+	   can jump back into xen_hypervisor_callback */
+	sete XEN_vcpu_info_mask(%eax)
+
+	popl %eax
+
+	/* From this point on the registers are restored and the stack
+	   updated, so we don't need to worry about it if we're preempted */
+iret_restore_end:
+
+	/* Jump to hypervisor_callback after fixing up the stack.
+	   Events are masked, so jumping out of the critical
+	   region is OK. */
+	je xen_hypervisor_callback
+
+	iret
+xen_iret_end_crit:
+
+hyper_iret:
+	/* put this out of line since its very rarely used */
+	jmp hypercall_page + __HYPERVISOR_iret * 32
+
+	.globl xen_iret_start_crit, xen_iret_end_crit
+
+/*
+   This is called by xen_hypervisor_callback in entry.S when it sees
+   that the EIP at the time of interrupt was between xen_iret_start_crit
+   and xen_iret_end_crit.  We're passed the EIP in %eax so we can do
+   a more refined determination of what to do.
+
+   The stack format at this point is:
+	----------------
+	 ss		: (ss/esp may be present if we came from usermode)
+	 esp		:
+	 eflags		}  outer exception info
+	 cs		}
+	 eip		}
+	---------------- <- edi (copy dest)
+	 eax		:  outer eax if it hasn't been restored
+	----------------
+	 eflags		}  nested exception info
+	 cs		}   (no ss/esp because we're nested
+	 eip		}    from the same ring)
+	 orig_eax	}<- esi (copy src)
+	 - - - - - - - -
+	 fs		}
+	 es		}
+	 ds		}  SAVE_ALL state
+	 eax		}
+	  :		:
+	 ebx		}
+	----------------
+	 return addr	 <- esp
+	----------------
+
+   In order to deliver the nested exception properly, we need to shift
+   everything from the return addr up to the error code so it
+   sits just under the outer exception info.  This means that when we
+   handle the exception, we do it in the context of the outer exception
+   rather than starting a new one.
+
+   The only caveat is that if the outer eax hasn't been
+   restored yet (ie, it's still on stack), we need to insert
+   its value into the SAVE_ALL state before going on, since
+   it's usermode state which we eventually need to restore.
+ */
+ENTRY(xen_iret_crit_fixup)
+	/* offsets +4 for return address */
+
+	/*
+	   Paranoia: Make sure we're really coming from userspace.
+	   One could imagine a case where userspace jumps into the
+	   critical range address, but just before the CPU delivers a GP,
+	   it decides to deliver an interrupt instead.  Unlikely?
+	   Definitely.  Easy to avoid?  Yes.  The Intel documents
+	   explicitly say that the reported EIP for a bad jump is the
+	   jump instruction itself, not the destination, but some virtual
+	   environments get this wrong.
+	 */
+	movl PT_CS+4(%esp), %ecx
+	andl $SEGMENT_RPL_MASK, %ecx
+	cmpl $USER_RPL, %ecx
+	je 2f
+
+	lea PT_ORIG_EAX+4(%esp), %esi
+	lea PT_EFLAGS+4(%esp), %edi
+
+	/* If eip is before iret_restore_end then stack
+	   hasn't been restored yet. */
+	cmp $iret_restore_end, %eax
+	jae 1f
+
+	movl 0+4(%edi),%eax		/* copy EAX */
+	movl %eax, PT_EAX+4(%esp)
+
+	lea ESP_OFFSET(%edi),%edi	/* move dest up over saved regs */
+
+	/* set up the copy */
+1:	std
+	mov $(PT_EIP+4) / 4, %ecx	/* copy ret+saved regs up to orig_eax */
+	rep movsl
+	cld
+
+	lea 4(%edi),%esp		/* point esp to new frame */
+2:	ret
+
+
+/*
+	Force an event check by making a hypercall,
+	but preserve regs before making the call.
+ */
+check_events:
+	push %eax
+	push %ecx
+	push %edx
+	call force_evtchn_callback
+	pop %edx
+	pop %ecx
+	pop %eax
+	ret

arch/i386/xen/xen-head.S

+/* Xen-specific pieces of head.S, intended to be included in the right
+	place in head.S */
+
+#ifdef CONFIG_XEN
+
+#include <linux/elfnote.h>
+#include <asm/boot.h>
+#include <xen/interface/elfnote.h>
+
+ENTRY(startup_xen)
+	movl %esi,xen_start_info
+	cld
+	movl $(init_thread_union+THREAD_SIZE),%esp
+	jmp xen_start_kernel
+
+.pushsection ".bss.page_aligned"
+	.align PAGE_SIZE_asm
+ENTRY(hypercall_page)
+	.skip 0x1000
+.popsection
+
+	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
+	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,  .asciz "2.6")
+	ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,    .asciz "xen-3.0")
+	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      .long  __PAGE_OFFSET)
+	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          .long  startup_xen)
+	ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long  hypercall_page)
+	ELFNOTE(Xen, XEN_ELFNOTE_FEATURES,       .asciz "!writable_page_tables|pae_pgdir_above_4gb")
+#ifdef CONFIG_X86_PAE
+	ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE,       .asciz "yes")
+#else
+	ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE,       .asciz "no")
+#endif
+	ELFNOTE(Xen, XEN_ELFNOTE_LOADER,         .asciz "generic")
+
+#endif /*CONFIG_XEN */

arch/i386/xen/xen-ops.h

+#ifndef XEN_OPS_H
+#define XEN_OPS_H
+
+#include <linux/init.h>
+
+/* These are code, but not functions.  Defined in entry.S */
+extern const char xen_hypervisor_callback[];
+extern const char xen_failsafe_callback[];
+
+void xen_copy_trap_info(struct trap_info *traps);
+
+DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu);
+DECLARE_PER_CPU(unsigned long, xen_cr3);
+
+extern struct start_info *xen_start_info;
+extern struct shared_info *HYPERVISOR_shared_info;
+
+char * __init xen_memory_setup(void);
+void __init xen_arch_setup(void);
+void __init xen_init_IRQ(void);
+
+void xen_setup_timer(int cpu);
+void xen_setup_cpu_clockevents(void);
+unsigned long xen_cpu_khz(void);
+void __init xen_time_init(void);
+unsigned long xen_get_wallclock(void);
+int xen_set_wallclock(unsigned long time);
+unsigned long long xen_sched_clock(void);
+
+void xen_mark_init_mm_pinned(void);
+
+DECLARE_PER_CPU(enum paravirt_lazy_mode, xen_lazy_mode);
+
+static inline unsigned xen_get_lazy_mode(void)
+{
+	return x86_read_percpu(xen_lazy_mode);
+}
+
+void __init xen_fill_possible_map(void);
+
+void __init xen_setup_vcpu_info_placement(void);
+void xen_smp_prepare_boot_cpu(void);
+void xen_smp_prepare_cpus(unsigned int max_cpus);
+int xen_cpu_up(unsigned int cpu);
+void xen_smp_cpus_done(unsigned int max_cpus);
+
+void xen_smp_send_stop(void);
+void xen_smp_send_reschedule(int cpu);
+int xen_smp_call_function (void (*func) (void *info), void *info, int nonatomic,
+			   int wait);
+int xen_smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+				 int nonatomic, int wait);
+
+int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *),
+			       void *info, int wait);
+
+
+/* Declare an asm function, along with symbols needed to make it
+   inlineable */
+#define DECL_ASM(ret, name, ...)		\
+	ret name(__VA_ARGS__);			\
+	extern char name##_end[];		\
+	extern char name##_reloc[]		\
+
+DECL_ASM(void, xen_irq_enable_direct, void);
+DECL_ASM(void, xen_irq_disable_direct, void);
+DECL_ASM(unsigned long, xen_save_fl_direct, void);
+DECL_ASM(void, xen_restore_fl_direct, unsigned long);
+
+void xen_iret_direct(void);
+#endif /* XEN_OPS_H */

arch/x86_64/kernel/early_printk.c

@@ -6,6 +6,7 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/fcntl.h>
+#include <xen/hvc-console.h>
 
 /* Simple VGA output */
 
@@ -242,6 +243,10 @@ static int __init setup_early_printk(char *buf)
  		simnow_init(buf + 6);
  		early_console = &simnow_console;
  		keep_early = 1;
+#ifdef CONFIG_HVC_XEN
+	} else if (!strncmp(buf, "xen", 3)) {
+		early_console = &xenboot_console;
+#endif
 	}
 
 	if (keep_early)

arch/x86_64/kernel/mce.c

@@ -174,7 +174,7 @@ static void do_mce_trigger(void)
 	if (events != atomic_read(&mce_logged) && trigger[0]) {
 		/* Small race window, but should be harmless.  */
 		atomic_set(&mce_logged, events);
-		call_usermodehelper(trigger, trigger_argv, NULL, -1);
+		call_usermodehelper(trigger, trigger_argv, NULL, UMH_NO_WAIT);
 	}
 }
 

drivers/Makefile

@@ -15,6 +15,8 @@ obj-$(CONFIG_ACPI)		+= acpi/
 obj-$(CONFIG_PNP)		+= pnp/
 obj-$(CONFIG_ARM_AMBA)		+= amba/
 
+obj-$(CONFIG_XEN)		+= xen/
+
 # char/ comes before serial/ etc so that the VT console is the boot-time
 # default.
 obj-y				+= char/

drivers/acpi/thermal.c

@@ -40,6 +40,7 @@
 #include <linux/jiffies.h>
 #include <linux/kmod.h>
 #include <linux/seq_file.h>
+#include <linux/reboot.h>
 #include <asm/uaccess.h>
 
 #include <acpi/acpi_bus.h>
@@ -59,7 +60,6 @@
 #define ACPI_THERMAL_NOTIFY_CRITICAL	0xF0
 #define ACPI_THERMAL_NOTIFY_HOT		0xF1
 #define ACPI_THERMAL_MODE_ACTIVE	0x00
-#define ACPI_THERMAL_PATH_POWEROFF	"/sbin/poweroff"
 
 #define ACPI_THERMAL_MAX_ACTIVE	10
 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
@@ -419,26 +419,6 @@ static int acpi_thermal_get_devices(struct acpi_thermal *tz)
 	return 0;
 }
 
-static int acpi_thermal_call_usermode(char *path)
-{
-	char *argv[2] = { NULL, NULL };
-	char *envp[3] = { NULL, NULL, NULL };
-
-
-	if (!path)
-		return -EINVAL;
-
-	argv[0] = path;
-
-	/* minimal command environment */
-	envp[0] = "HOME=/";
-	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-
-	call_usermodehelper(argv[0], argv, envp, 0);
-
-	return 0;
-}
-
 static int acpi_thermal_critical(struct acpi_thermal *tz)
 {
 	if (!tz || !tz->trips.critical.flags.valid)
@@ -456,7 +436,7 @@ static int acpi_thermal_critical(struct acpi_thermal *tz)
 	acpi_bus_generate_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
 				tz->trips.critical.flags.enabled);
 
-	acpi_thermal_call_usermode(ACPI_THERMAL_PATH_POWEROFF);
+	orderly_poweroff(true);
 
 	return 0;
 }

drivers/block/Kconfig

@@ -427,4 +427,13 @@ config XILINX_SYSACE
 	help
 	  Include support for the Xilinx SystemACE CompactFlash interface
 
+config XEN_BLKDEV_FRONTEND
+	tristate "Xen virtual block device support"
+	depends on XEN
+	default y
+	help
+	  This driver implements the front-end of the Xen virtual
+	  block device driver.  It communicates with a back-end driver
+	  in another domain which drives the actual block device.
+
 endif # BLK_DEV

drivers/block/Makefile

@@ -29,3 +29,4 @@ obj-$(CONFIG_VIODASD)		+= viodasd.o
 obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
 obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
 
+obj-$(CONFIG_XEN_BLKDEV_FRONTEND)	+= xen-blkfront.o

drivers/char/Kconfig

@@ -604,6 +604,14 @@ config HVC_BEAT
 	help
 	  Toshiba's Cell Reference Set Beat Console device driver
 
+config HVC_XEN
+	bool "Xen Hypervisor Console support"
+	depends on XEN
+	select HVC_DRIVER
+	default y
+	help
+	  Xen virtual console device driver
+
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
 	depends on PPC_PSERIES

drivers/char/Makefile

@@ -48,6 +48,7 @@ obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
 obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
 obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
+obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o

drivers/char/hvc_xen.c

+/*
+ * xen console driver interface to hvc_console.c
+ *
+ * (c) 2007 Gerd Hoffmann <kraxel@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/types.h>
+
+#include <asm/xen/hypervisor.h>
+#include <xen/page.h>
+#include <xen/events.h>
+#include <xen/interface/io/console.h>
+#include <xen/hvc-console.h>
+
+#include "hvc_console.h"
+
+#define HVC_COOKIE   0x58656e /* "Xen" in hex */
+
+static struct hvc_struct *hvc;
+static int xencons_irq;
+
+/* ------------------------------------------------------------------ */
+
+static inline struct xencons_interface *xencons_interface(void)
+{
+	return mfn_to_virt(xen_start_info->console.domU.mfn);
+}
+
+static inline void notify_daemon(void)
+{
+	/* Use evtchn: this is called early, before irq is set up. */
+	notify_remote_via_evtchn(xen_start_info->console.domU.evtchn);
+}
+
+static int write_console(uint32_t vtermno, const char *data, int len)
+{
+	struct xencons_interface *intf = xencons_interface();
+	XENCONS_RING_IDX cons, prod;
+	int sent = 0;
+
+	cons = intf->out_cons;
+	prod = intf->out_prod;
+	mb();			/* update queue values before going on */
+	BUG_ON((prod - cons) > sizeof(intf->out));
+
+	while ((sent < len) && ((prod - cons) < sizeof(intf->out)))
+		intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++];
+
+	wmb();			/* write ring before updating pointer */
+	intf->out_prod = prod;
+
+	notify_daemon();
+	return sent;
+}
+
+static int read_console(uint32_t vtermno, char *buf, int len)
+{
+	struct xencons_interface *intf = xencons_interface();
+	XENCONS_RING_IDX cons, prod;
+	int recv = 0;
+
+	cons = intf->in_cons;
+	prod = intf->in_prod;
+	mb();			/* get pointers before reading ring */
+	BUG_ON((prod - cons) > sizeof(intf->in));
+
+	while (cons != prod && recv < len)
+		buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)];
+
+	mb();			/* read ring before consuming */
+	intf->in_cons = cons;
+
+	notify_daemon();
+	return recv;
+}
+
+static struct hv_ops hvc_ops = {
+	.get_chars = read_console,
+	.put_chars = write_console,
+};
+
+static int __init xen_init(void)
+{
+	struct hvc_struct *hp;
+
+	if (!is_running_on_xen())
+		return 0;
+
+	xencons_irq = bind_evtchn_to_irq(xen_start_info->console.domU.evtchn);
+	if (xencons_irq < 0)
+		xencons_irq = 0 /* NO_IRQ */;
+	hp = hvc_alloc(HVC_COOKIE, xencons_irq, &hvc_ops, 256);
+	if (IS_ERR(hp))
+		return PTR_ERR(hp);
+
+	hvc = hp;
+	return 0;
+}
+
+static void __exit xen_fini(void)
+{
+	if (hvc)
+		hvc_remove(hvc);
+}
+
+static int xen_cons_init(void)
+{
+	if (!is_running_on_xen())
+		return 0;
+
+	hvc_instantiate(HVC_COOKIE, 0, &hvc_ops);
+	return 0;
+}
+
+module_init(xen_init);
+module_exit(xen_fini);
+console_initcall(xen_cons_init);
+
+static void xenboot_write_console(struct console *console, const char *string,
+				  unsigned len)
+{
+	unsigned int linelen, off = 0;
+	const char *pos;
+
+	while (off < len && NULL != (pos = strchr(string+off, '\n'))) {
+		linelen = pos-string+off;
+		if (off + linelen > len)
+			break;
+		write_console(0, string+off, linelen);
+		write_console(0, "\r\n", 2);
+		off += linelen + 1;
+	}
+	if (off < len)
+		write_console(0, string+off, len-off);
+}
+
+struct console xenboot_console = {
+	.name		= "xenboot",
+	.write		= xenboot_write_console,
+	.flags		= CON_PRINTBUFFER | CON_BOOT,
+};

drivers/macintosh/therm_pm72.c

@@ -1770,7 +1770,8 @@ static int call_critical_overtemp(void)
 				"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
 				NULL };
 
-	return call_usermodehelper(critical_overtemp_path, argv, envp, 0);
+	return call_usermodehelper(critical_overtemp_path,
+				   argv, envp, UMH_WAIT_EXEC);
 }
 
 

drivers/macintosh/windfarm_core.c

@@ -80,7 +80,8 @@ int wf_critical_overtemp(void)
 				"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
 				NULL };
 
-	return call_usermodehelper(critical_overtemp_path, argv, envp, 0);
+	return call_usermodehelper(critical_overtemp_path,
+				   argv, envp, UMH_WAIT_EXEC);
 }
 EXPORT_SYMBOL_GPL(wf_critical_overtemp);
 

drivers/net/Kconfig

@@ -2486,6 +2486,18 @@ source "drivers/atm/Kconfig"
 
 source "drivers/s390/net/Kconfig"
 
+config XEN_NETDEV_FRONTEND
+	tristate "Xen network device frontend driver"
+	depends on XEN
+	default y
+	help
+	  The network device frontend driver allows the kernel to
+	  access network devices exported exported by a virtual
+	  machine containing a physical network device driver. The
+	  frontend driver is intended for unprivileged guest domains;
+	  if you are compiling a kernel for a Xen guest, you almost
+	  certainly want to enable this.
+
 config ISERIES_VETH
 	tristate "iSeries Virtual Ethernet driver support"
 	depends on PPC_ISERIES

drivers/net/Makefile

@@ -127,6 +127,8 @@ obj-$(CONFIG_PPPOL2TP) += pppox.o pppol2tp.o
 obj-$(CONFIG_SLIP) += slip.o
 obj-$(CONFIG_SLHC) += slhc.o
 
+obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+
 obj-$(CONFIG_DUMMY) += dummy.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o

drivers/net/hamradio/baycom_epp.c

@@ -320,7 +320,7 @@ static int eppconfig(struct baycom_state *bc)
 	sprintf(portarg, "%ld", bc->pdev->port->base);
 	printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg);
 
-	return call_usermodehelper(eppconfig_path, argv, envp, 1);
+	return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC);
 }
 
 /* ---------------------------------------------------------------------- */

drivers/pnp/pnpbios/core.c

@@ -147,7 +147,7 @@ static int pnp_dock_event(int dock, struct pnp_docking_station_info *info)
 		info->location_id, info->serial, info->capabilities);
 	envp[i] = NULL;
 	
-	value = call_usermodehelper (argv [0], argv, envp, 0);
+	value = call_usermodehelper (argv [0], argv, envp, UMH_WAIT_EXEC);
 	kfree (buf);
 	kfree (envp);
 	return 0;

drivers/sbus/char/bbc_envctrl.c

@@ -7,6 +7,7 @@
 #include <linux/kthread.h>
 #include <linux/delay.h>
 #include <linux/kmod.h>
+#include <linux/reboot.h>
 #include <asm/oplib.h>
 #include <asm/ebus.h>
 
@@ -170,8 +171,6 @@ static void get_current_temps(struct bbc_cpu_temperature *tp)
 static void do_envctrl_shutdown(struct bbc_cpu_temperature *tp)
 {
 	static int shutting_down = 0;
-	static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/sbin:/usr/sbin:/bin:/usr/bin", NULL };
-	char *argv[] = { "/sbin/shutdown", "-h", "now", NULL };
 	char *type = "???";
 	s8 val = -1;
 
@@ -195,7 +194,7 @@ static void do_envctrl_shutdown(struct bbc_cpu_temperature *tp)
 	printk(KERN_CRIT "kenvctrld: Shutting down the system now.\n");
 
 	shutting_down = 1;
-	if (call_usermodehelper("/sbin/shutdown", argv, envp, 0) < 0)
+	if (orderly_poweroff(true) < 0)
 		printk(KERN_CRIT "envctrl: shutdown execution failed\n");
 }
 

drivers/sbus/char/envctrl.c

@@ -26,6 +26,7 @@
 #include <linux/ioport.h>
 #include <linux/miscdevice.h>
 #include <linux/kmod.h>
+#include <linux/reboot.h>
 
 #include <asm/ebus.h>
 #include <asm/uaccess.h>
@@ -966,10 +967,6 @@ static struct i2c_child_t *envctrl_get_i2c_child(unsigned char mon_type)
 static void envctrl_do_shutdown(void)
 {
 	static int inprog = 0;
-	static char *envp[] = {	
-		"HOME=/", "TERM=linux", "PATH=/sbin:/usr/sbin:/bin:/usr/bin", NULL };
-	char *argv[] = { 
-		"/sbin/shutdown", "-h", "now", NULL };	
 	int ret;
 
 	if (inprog != 0)
@@ -977,7 +974,7 @@ static void envctrl_do_shutdown(void)
 
 	inprog = 1;
 	printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n");
-	ret = call_usermodehelper("/sbin/shutdown", argv, envp, 0);
+	ret = orderly_poweroff(true);
 	if (ret < 0) {
 		printk(KERN_CRIT "kenvctrld: WARNING: system shutdown failed!\n"); 
 		inprog = 0;  /* unlikely to succeed, but we could try again */

drivers/xen/Makefile

+obj-y	+= grant-table.o
+obj-y	+= xenbus/

drivers/xen/xenbus/Makefile

+obj-y	+= xenbus.o
+
+xenbus-objs =
+xenbus-objs += xenbus_client.o
+xenbus-objs += xenbus_comms.o
+xenbus-objs += xenbus_xs.o
+xenbus-objs += xenbus_probe.o

fs/ocfs2/heartbeat.c

@@ -209,7 +209,7 @@ void ocfs2_stop_heartbeat(struct ocfs2_super *osb)
 	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
 	envp[2] = NULL;
 
-	ret = call_usermodehelper(argv[0], argv, envp, 1);
+	ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
 	if (ret < 0)
 		mlog_errno(ret);
 }