iio: frequency: ad9523: Fix typo in ad9523_platform_data

Replace diff_{m1,m2} with div_{m1,m2} since they are dividers and not a
differential settings.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/frequency/ad9523.c

@@ -872,22 +872,22 @@ static int ad9523_setup(struct iio_dev *indio_dev)
 		return ret;
 
 	ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_DIVIDER,
-		AD9523_PLL2_VCO_DIV_M1(pdata->pll2_vco_diff_m1) |
-		AD9523_PLL2_VCO_DIV_M2(pdata->pll2_vco_diff_m2) |
-		AD_IFE(pll2_vco_diff_m1, 0,
+		AD9523_PLL2_VCO_DIV_M1(pdata->pll2_vco_div_m1) |
+		AD9523_PLL2_VCO_DIV_M2(pdata->pll2_vco_div_m2) |
+		AD_IFE(pll2_vco_div_m1, 0,
 		       AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN) |
-		AD_IFE(pll2_vco_diff_m2, 0,
+		AD_IFE(pll2_vco_div_m2, 0,
 		       AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN));
 	if (ret < 0)
 		return ret;
 
-	if (pdata->pll2_vco_diff_m1)
+	if (pdata->pll2_vco_div_m1)
 		st->vco_out_freq[AD9523_VCO1] =
-			st->vco_freq / pdata->pll2_vco_diff_m1;
+			st->vco_freq / pdata->pll2_vco_div_m1;
 
-	if (pdata->pll2_vco_diff_m2)
+	if (pdata->pll2_vco_div_m2)
 		st->vco_out_freq[AD9523_VCO2] =
-			st->vco_freq / pdata->pll2_vco_diff_m2;
+			st->vco_freq / pdata->pll2_vco_div_m2;
 
 	st->vco_out_freq[AD9523_VCXO] = pdata->vcxo_freq;
 

include/linux/iio/frequency/ad9523.h

@@ -129,8 +129,8 @@ enum cpole1_capacitor {
  * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63.
  * @pll2_freq_doubler_en: PLL2 frequency doubler enable.
  * @pll2_r2_div: PLL2 R2 divider, range 0..31.
- * @pll2_vco_diff_m1: VCO1 divider, range 3..5.
- * @pll2_vco_diff_m2: VCO2 divider, range 3..5.
+ * @pll2_vco_div_m1: VCO1 divider, range 3..5.
+ * @pll2_vco_div_m2: VCO2 divider, range 3..5.
  * @rpole2: PLL2 loop filter Rpole resistor value.
  * @rzero: PLL2 loop filter Rzero resistor value.
  * @cpole1: PLL2 loop filter Cpole capacitor value.
@@ -176,8 +176,8 @@ struct ad9523_platform_data {
 	unsigned char			pll2_ndiv_b_cnt;
 	bool				pll2_freq_doubler_en;
 	unsigned char			pll2_r2_div;
-	unsigned char			pll2_vco_diff_m1; /* 3..5 */
-	unsigned char			pll2_vco_diff_m2; /* 3..5 */
+	unsigned char			pll2_vco_div_m1; /* 3..5 */
+	unsigned char			pll2_vco_div_m2; /* 3..5 */
 
 	/* Loop Filter PLL2 */
 	enum rpole2_resistor		rpole2;