ldmvsw: Add ldmvsw.c driver code

  Add ldmvsw.c driver

  Details:

  The ldmvsw driver very closely follows the sunvnet.c code and makes
  use of the sunvnet_common.c code for core functionality.

  A significant difference between sunvnet and ldmvsw driver is
  sunvnet creates a network interface for each vnet-port *parent*
  node in the MD while the ldmvsw driver creates a network interface
  for every vsw-port node in the Machine Description (MD).
  Therefore the netdev_priv() for sunvnet is a vnet structure while
  the netdev_priv() for ldmvsw is a vnet_port structure.

  Vnet_port structures allocated by ldmvsw have the vsw bit set.
  When finding the net_device associated with a port, the common code keys
  off this bit to use either the net_device found in the vnet_port or the
  net_device in the vnet structure (see the VNET_PORT_TO_NET_DEVICE() macro in
  sunvnet_common.h). This scheme allows the common code to work with
  both drivers with minimal changes.

  Similar to Xen, network interfaces created by the ldmvsw driver will always
  have a HW Addr (i.e. mac address) of FE:FF:FF:FF:FF:FF and each will be
  assigned the devname "vif<cfg_handle>.<port_id>" - where <cfg_handle> and
  <port_id> are a unique handle/port pair assigned to the associated
  vsw-port node in the MD.
Signed-off-by: Aaron Young <aaron.young@oracle.com>
Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/sparc/configs/sparc64_defconfig

@@ -102,6 +102,7 @@ CONFIG_SUNLANCE=m
 CONFIG_HAPPYMEAL=m
 CONFIG_SUNGEM=m
 CONFIG_SUNVNET=m
+CONFIG_LDMVSW=m
 CONFIG_NET_PCI=y
 CONFIG_E1000=m
 CONFIG_E1000E=m

drivers/net/ethernet/sun/Kconfig

@@ -80,6 +80,17 @@ config SUNVNET
 	---help---
 	  Support for virtual network devices under Sun Logical Domains.
 
+config LDMVSW
+	tristate "Sun4v LDoms Virtual Switch support"
+	depends on SUN_LDOMS
+	---help---
+	  Support for virtual switch devices under Sun4v Logical Domains.
+	  This driver adds a network interface for every vsw-port node
+	  found in the machine description of a service domain.
+	  Linux bridge/switch software can use these interfaces for
+	  guest domain network interconnectivity or guest domain
+	  connection to a physical network on a service domain.
+
 config NIU
 	tristate "Sun Neptune 10Gbit Ethernet support"
 	depends on PCI

drivers/net/ethernet/sun/Makefile

@@ -9,4 +9,5 @@ obj-$(CONFIG_SUNGEM) += sungem.o
 obj-$(CONFIG_CASSINI) += cassini.o
 obj-$(CONFIG_SUNVNET_COMMON) += sunvnet_common.o
 obj-$(CONFIG_SUNVNET) += sunvnet.o
+obj-$(CONFIG_LDMVSW) += ldmvsw.o
 obj-$(CONFIG_NIU) += niu.o