[PATCH] Spelling fixes from spell-fix.pl

This patch contains the first fruits of the automatic spell checking and
correcting scripts written by Dan Kegel and Matthias Schniedermeyer.
Those scripts are available here: http://www.kegel.com/kerspell/

This patch fixes these six words from the first five lines of
spell-fix.txt.  280 lines remaining.

  accesible   -> accessible
  accesing    -> accessing
  accomodate  -> accommodate
  acommodate  -> accommodate
  Acknowlege  -> Acknowledge
  acknoledged -> acknowledged

arch/arm/mach-pxa/irq.c

@@ -86,7 +86,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 }
 
 /*
- * GPIO IRQs must be acknoledged.  This is for GPIO 0 and 1.
+ * GPIO IRQs must be acknowledged.  This is for GPIO 0 and 1.
  */
 
 static void pxa_ack_low_gpio(unsigned int irq)

arch/arm/mach-sa1100/irq.c

@@ -68,7 +68,7 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type)
 }
 
 /*
- * GPIO IRQs must be acknoledged.  This is for IRQs from 0 to 10.
+ * GPIO IRQs must be acknowledged.  This is for IRQs from 0 to 10.
  */
 static void sa1100_low_gpio_ack(unsigned int irq)
 {

arch/cris/kernel/kgdb.c

@@ -152,7 +152,7 @@
  *    (IPL too high, disabled, ...)
  *
  *  - The gdb stub is currently not reentrant, i.e. errors that happen therein
- *    (e.g. accesing invalid memory) may not be caught correctly. This could
+ *    (e.g. accessing invalid memory) may not be caught correctly. This could
  *    be removed in future by introducing a stack of struct registers.
  *
  */

arch/i386/mach-voyager/voyager_smp.c

@@ -1473,7 +1473,7 @@ send_CPI(__u32 cpuset, __u8 cpi)
 		outb((__u8)cpuset, VIC_CPI_Registers[VIC_CPI_LEVEL0]);
 }
 
-/* Acknowlege receipt of CPI in the QIC, clear in QIC hardware and
+/* Acknowledge receipt of CPI in the QIC, clear in QIC hardware and
  * set the cache line to shared by reading it.
  *
  * DON'T make this inline otherwise the cache line read will be

arch/ia64/sn/io/l1.c

@@ -2602,7 +2602,7 @@ subch_pull_msg( brl1_sch_t *subch, char *msg, int *len )
 {
     sc_cq_t *q;         /* receive queue */
     int before_wrap,    /* packet may be split into two different       */
-        after_wrap;     /*   pieces to acommodate queue wraparound      */
+        after_wrap;     /*   pieces to accommodate queue wraparound      */
 
     /* pull message off the receive queue */
     q = subch->iqp;

drivers/cdrom/cdrom.c

@@ -173,7 +173,7 @@
   -- Fixed the CDROMREADxxx ioctls.
   -- CDROMPLAYTRKIND uses the GPCMD_PLAY_AUDIO_MSF command - too few
   drives supported it. We lose the index part, however.
-  -- Small modifications to accomodate opens of /dev/hdc1, required
+  -- Small modifications to accommodate opens of /dev/hdc1, required
   for ide-cd to handle multisession discs.
   -- Export cdrom_mode_sense and cdrom_mode_select.
   -- init_cdrom_command() for setting up a cgc command.

drivers/char/cd1865.h

@@ -54,9 +54,9 @@
 #define CD186x_RCSR      0x7a    /* Receiver Character Status Register      */
 #define CD186x_TDR       0x7b    /* Transmit Data Register                  */
 #define CD186x_EOIR      0x7f    /* End of Interrupt Register               */
-#define CD186x_MRAR      0x75    /* Modem Request Acknowlege register       */
-#define CD186x_TRAR      0x76    /* Transmit Request Acknowlege register    */
-#define CD186x_RRAR      0x77    /* Receive Request Acknowlege register     */
+#define CD186x_MRAR      0x75    /* Modem Request Acknowledge register       */
+#define CD186x_TRAR      0x76    /* Transmit Request Acknowledge register    */
+#define CD186x_RRAR      0x77    /* Receive Request Acknowledge register     */
 #define CD186x_SRCR      0x66    /* Service Request Configuration register  */
 
 /* Channel Registers */

drivers/char/drm/i810_drm.h

@@ -38,7 +38,7 @@
  *    - zbuffer linear offset and pitch -- also invarient
  *    - drawing origin in back and depth buffers.
  *
- * Keep the depth/back buffer state here to acommodate private buffers
+ * Keep the depth/back buffer state here to accommodate private buffers
  * in the future.
  */
 #define I810_DESTREG_DI0  0	/* CMD_OP_DESTBUFFER_INFO (2 dwords) */

drivers/char/drm/i830_drm.h

@@ -68,7 +68,7 @@
  *    - zbuffer linear offset and pitch -- also invarient
  *    - drawing origin in back and depth buffers.
  *
- * Keep the depth/back buffer state here to acommodate private buffers
+ * Keep the depth/back buffer state here to accommodate private buffers
  * in the future.
  */
 

drivers/net/sk98lin/skge.c

@@ -3627,7 +3627,7 @@ SK_U32 Val)		/* pointer to store the read value */
  * Description:
  *	This routine writes a 16 bit value to the pci configuration
  *	space. The flag PciConfigUp indicates whether the config space
- *	is accesible or must be set up first.
+ *	is accessible or must be set up first.
  *
  * Returns:
  *	0 - indicate everything worked ok.
@@ -3650,7 +3650,7 @@ SK_U16 Val)		/* pointer to store the read value */
  * Description:
  *	This routine writes a 8 bit value to the pci configuration
  *	space. The flag PciConfigUp indicates whether the config space
- *	is accesible or must be set up first.
+ *	is accessible or must be set up first.
  *
  * Returns:
  *	0 - indicate everything worked ok.

drivers/net/sk98lin/ski2c.c

@@ -444,7 +444,7 @@ SK_IOC	IoC)	/* I/O Context */
 /*
  * Receive an ACK.
  *
- * returns	0 If acknoledged
+ * returns	0 If acknowledged
  *		1 in case of an error
  */
 int SkI2cRcvAck(

drivers/s390/block/dasd_eckd.c

@@ -19,7 +19,7 @@
  * 10/04/00 changed RW-CCWS to R/W Key and Data
  * 10/10/00 reverted last change according to ESS exploitation
  * 10/10/00 now dequeuing init_cqr before freeing *ouch*
- * 26/10/00 fixed ITPM20144ASC (problems when accesing a device formatted by VIF)
+ * 26/10/00 fixed ITPM20144ASC (problems when accessing a device formatted by VIF)
  * 01/23/01 fixed kmalloc statement in dump_sense to be GFP_ATOMIC
  *	    fixed partition handling and HDIO_GETGEO
  * 2002/01/04 Created 2.4-2.5 compatibility mode

drivers/scsi/pcmcia/nsp_cs.h

@@ -183,7 +183,7 @@
 #define S_ATN		0x80	/**/
 #define S_SELECT	0x40	/**/
 #define S_REQUEST	0x20    /* Request line from SCSI bus*/
-#define S_ACK		0x10    /* Acknowlege line from SCSI bus*/
+#define S_ACK		0x10    /* Acknowledge line from SCSI bus*/
 #define S_BUSY		0x08    /* Busy line from SCSI bus*/
 #define S_CD		0x04    /* Command/Data line from SCSI bus*/
 #define S_IO		0x02    /* Input/Output line from SCSI bus*/

fs/ufs/util.h

@@ -25,7 +25,7 @@
 
 
 /*
- * macros used for accesing structures
+ * macros used for accessing structures
  */
 static inline s32
 ufs_get_fs_state(struct super_block *sb, struct ufs_super_block_first *usb1,

sound/isa/opl3sa2.c

@@ -268,7 +268,7 @@ static int __init snd_opl3sa2_detect(opl3sa2_t *chip)
 		snd_printd("OPL3-SA [0x%lx] detect (1) = 0x%x (0x%x)\n", port, tmp, tmp1);
 		return -ENODEV;
 	}
-	/* try if the MIC register is accesible */
+	/* try if the MIC register is accessible */
 	tmp = snd_opl3sa2_read(chip, OPL3SA2_MIC);
 	snd_opl3sa2_write(chip, OPL3SA2_MIC, 0x8a);
 	if (((tmp1 = snd_opl3sa2_read(chip, OPL3SA2_MIC)) & 0x9f) != 0x8a) {

sound/pci/cs46xx/dsp_spos.h

@@ -173,7 +173,7 @@ typedef enum  {
 #define BG_INTERVAL_TIMER_PERIOD                0x0100
 
 
-/* Only SP accesible registers */
+/* Only SP accessible registers */
 #define SP_ASER_COUNTDOWN 0x8040
 #define SP_SPDOUT_FIFO    0x0108
 #define SP_SPDIN_MI_FIFO  0x01E0