Commit 5ddfac3b authored by Sujith's avatar Sujith Committed by John W. Linville

ath9k: Remove rate control reference in VAP

Rate control init is now confined to itself, using the
HT capabilites of the STA from rate_init().
Signed-off-by: default avatarSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ffd651c6
......@@ -540,6 +540,29 @@ void ath_newassoc(struct ath_softc *sc,
void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta);
void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta);
/********/
/* VAPs */
/********/
/*
* Define the scheme that we select MAC address for multiple
* BSS on the same radio. The very first VAP will just use the MAC
* address from the EEPROM. For the next 3 VAPs, we set the
* U/L bit (bit 1) in MAC address, and use the next two bits as the
* index of the VAP.
*/
#define ATH_SET_VAP_BSSID_MASK(bssid_mask) \
((bssid_mask)[0] &= ~(((ATH_BCBUF-1)<<2)|0x02))
/* driver-specific vap state */
struct ath_vap {
int av_bslot; /* beacon slot index */
enum ath9k_opmode av_opmode; /* VAP operational mode */
struct ath_buf *av_bcbuf; /* beacon buffer */
struct ath_tx_control av_btxctl; /* txctl information for beacon */
};
/*******************/
/* Beacon Handling */
/*******************/
......@@ -579,30 +602,6 @@ void ath_beacon_sync(struct ath_softc *sc, int if_id);
void ath_get_beaconconfig(struct ath_softc *sc,
int if_id,
struct ath_beacon_config *conf);
/********/
/* VAPs */
/********/
/*
* Define the scheme that we select MAC address for multiple
* BSS on the same radio. The very first VAP will just use the MAC
* address from the EEPROM. For the next 3 VAPs, we set the
* U/L bit (bit 1) in MAC address, and use the next two bits as the
* index of the VAP.
*/
#define ATH_SET_VAP_BSSID_MASK(bssid_mask) \
((bssid_mask)[0] &= ~(((ATH_BCBUF-1)<<2)|0x02))
/* driver-specific vap state */
struct ath_vap {
int av_bslot; /* beacon slot index */
enum ath9k_opmode av_opmode; /* VAP operational mode */
struct ath_buf *av_bcbuf; /* beacon buffer */
struct ath_tx_control av_btxctl; /* txctl information for beacon */
struct ath_rate_node *rc_node;
};
/*********************/
/* Antenna diversity */
/*********************/
......
......@@ -316,10 +316,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
DPRINTF(sc, ATH_DBG_FATAL,
"%s: Unable to set channel\n",
__func__);
/* Update ratectrl about the new state */
ath_rc_node_update(hw, avp->rc_node);
/* Start ANI */
mod_timer(&sc->sc_ani.timer,
jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
......
......@@ -1446,35 +1446,39 @@ static void ath_rate_tx_complete(struct ath_softc *sc,
info_priv->tx.ts_longretry);
}
/*
* Update the SIB's rate control information
*
* This should be called when the supported rates change
* (e.g. SME operation, wireless mode change)
*
* It will determine which rates are valid for use.
*/
static void ath_rc_sib_update(struct ath_softc *sc,
static void ath_rc_init(struct ath_softc *sc,
struct ath_rate_node *ath_rc_priv,
u32 capflag, int keep_state,
struct ath_rateset *negotiated_rates,
struct ath_rateset *negotiated_htrates)
struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta)
{
struct ath_rate_table *rate_table = NULL;
struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc;
struct ath_rateset *rateset = negotiated_rates;
u8 *ht_mcs = (u8 *)negotiated_htrates;
struct ath_rateset *rateset = &ath_rc_priv->neg_rates;
u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates;
u8 i, j, k, hi = 0, hthi = 0;
rate_table = (struct ath_rate_table *)
asc->hw_rate_table[sc->sc_curmode];
if (sta->ht_cap.ht_supported) {
if (sband->band == IEEE80211_BAND_2GHZ)
rate_table = (struct ath_rate_table *)
asc->hw_rate_table[ATH9K_MODE_11NG_HT20];
else
rate_table = (struct ath_rate_table *)
asc->hw_rate_table[ATH9K_MODE_11NA_HT20];
ath_rc_priv->ht_cap = (WLAN_RC_HT_FLAG | WLAN_RC_DS_FLAG);
if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
ath_rc_priv->ht_cap |= WLAN_RC_40_FLAG;
}
/* Initial rate table size. Will change depending
* on the working rate set */
ath_rc_priv->rate_table_size = MAX_TX_RATE_TBL;
/* Initialize thresholds according to the global rate table */
for (i = 0 ; (i < ath_rc_priv->rate_table_size) && (!keep_state); i++) {
for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) {
ath_rc_priv->state[i].rssi_thres =
rate_table->info[i].rssi_ack_validmin;
ath_rc_priv->state[i].per = 0;
......@@ -1488,24 +1492,24 @@ static void ath_rc_sib_update(struct ath_softc *sc,
ath_rc_priv->valid_phy_rateidx[i][j] = 0;
ath_rc_priv->valid_phy_ratecnt[i] = 0;
}
ath_rc_priv->rc_phy_mode = (capflag & WLAN_RC_40_FLAG);
ath_rc_priv->rc_phy_mode = (ath_rc_priv->ht_cap & WLAN_RC_40_FLAG);
/* Set stream capability */
ath_rc_priv->single_stream = (capflag & WLAN_RC_DS_FLAG) ? 0 : 1;
ath_rc_priv->single_stream = (ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ? 0 : 1;
if (!rateset->rs_nrates) {
/* No working rate, just initialize valid rates */
hi = ath_rc_sib_init_validrates(ath_rc_priv, rate_table,
capflag);
ath_rc_priv->ht_cap);
} else {
/* Use intersection of working rates and valid rates */
hi = ath_rc_sib_setvalid_rates(ath_rc_priv, rate_table,
rateset, capflag);
if (capflag & WLAN_RC_HT_FLAG) {
rateset, ath_rc_priv->ht_cap);
if (ath_rc_priv->ht_cap & WLAN_RC_HT_FLAG) {
hthi = ath_rc_sib_setvalid_htrates(ath_rc_priv,
rate_table,
ht_mcs,
capflag);
ath_rc_priv->ht_cap);
}
hi = A_MAX(hi, hthi);
}
......@@ -1539,29 +1543,6 @@ static void ath_rc_sib_update(struct ath_softc *sc,
ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4];
}
void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv)
{
struct ath_softc *sc = hw->priv;
u32 capflag = 0;
if (hw->conf.ht.enabled) {
capflag |= ATH_RC_HT_FLAG | ATH_RC_DS_FLAG;
if (sc->sc_ht_info.tx_chan_width == ATH9K_HT_MACMODE_2040)
capflag |= ATH_RC_CW40_FLAG;
}
rc_priv->ht_cap =
((capflag & ATH_RC_DS_FLAG) ? WLAN_RC_DS_FLAG : 0) |
((capflag & ATH_RC_SGI_FLAG) ? WLAN_RC_SGI_FLAG : 0) |
((capflag & ATH_RC_HT_FLAG) ? WLAN_RC_HT_FLAG : 0) |
((capflag & ATH_RC_CW40_FLAG) ? WLAN_RC_40_FLAG : 0);
ath_rc_sib_update(sc, rc_priv, rc_priv->ht_cap, 0,
&rc_priv->neg_rates,
&rc_priv->neg_ht_rates);
}
/* Rate Control callbacks */
static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta,
......@@ -1684,7 +1665,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
ath_rc_priv->neg_ht_rates.rs_nrates = j;
}
ath_rc_node_update(sc->hw, priv_sta);
ath_rc_init(sc, priv_sta, sband, sta);
}
static void *ath_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
......@@ -1699,16 +1680,9 @@ static void ath_rate_free(void *priv)
static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
{
struct ieee80211_vif *vif;
struct ath_softc *sc = priv;
struct ath_vap *avp;
struct ath_rate_node *rate_priv;
vif = sc->sc_vaps[0];
ASSERT(vif);
avp = (void *)vif->drv_priv;
rate_priv = kzalloc(sizeof(struct ath_rate_node), gfp);
if (!rate_priv) {
DPRINTF(sc, ATH_DBG_FATAL,
......@@ -1717,9 +1691,7 @@ static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp
return NULL;
}
rate_priv->avp = avp;
rate_priv->asc = sc->sc_rc;
avp->rc_node = rate_priv;
rate_priv->rssi_down_time = jiffies_to_msecs(jiffies);
return rate_priv;
......
......@@ -265,7 +265,6 @@ struct ath_rate_node {
struct ath_rateset neg_rates;
struct ath_rateset neg_ht_rates;
struct ath_rate_softc *asc;
struct ath_vap *avp;
};
/* Driver data of ieee80211_tx_info */
......@@ -279,7 +278,6 @@ struct ath_tx_info_priv {
struct ath_rate_softc *ath_rate_attach(struct ath_softc *sch);
void ath_rate_detach(struct ath_rate_softc *asc);
void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv);
u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate);
int ath_rate_control_register(void);
void ath_rate_control_unregister(void);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment