Commit 5e41486c authored by Anton Vorontsov's avatar Anton Vorontsov Committed by Kumar Gala

powerpc/QE: add support for QE USB clocks routing

This patch adds a function to the qe_lib to setup QE USB clocks routing.
To setup clocks safely, cmxgcr register needs locking, so I just reused
ucc_lock since it was used only to protect cmxgcr.

The idea behind placing clocks routing functions into the qe_lib is that
later we'll hopefully switch to the generic Linux Clock API, thus, for
example, FHCI driver may be used for QE and CPM chips without nasty #ifdefs.

This patch also fixes QE_USB_RESTART_TX command definition in the qe.h.
Signed-off-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-By: default avatarTimur Tabi <timur@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 83ff9dcf
...@@ -20,3 +20,7 @@ config UCC ...@@ -20,3 +20,7 @@ config UCC
bool bool
default y if UCC_FAST || UCC_SLOW default y if UCC_FAST || UCC_SLOW
config QE_USB
bool
help
QE USB Host Controller support
...@@ -6,3 +6,4 @@ obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o ...@@ -6,3 +6,4 @@ obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
obj-$(CONFIG_UCC) += ucc.o obj-$(CONFIG_UCC) += ucc.o
obj-$(CONFIG_UCC_SLOW) += ucc_slow.o obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
obj-$(CONFIG_UCC_FAST) += ucc_fast.o obj-$(CONFIG_UCC_FAST) += ucc_fast.o
obj-$(CONFIG_QE_USB) += usb.o
...@@ -26,7 +26,8 @@ ...@@ -26,7 +26,8 @@
#include <asm/qe.h> #include <asm/qe.h>
#include <asm/ucc.h> #include <asm/ucc.h>
static DEFINE_SPINLOCK(ucc_lock); DEFINE_SPINLOCK(cmxgcr_lock);
EXPORT_SYMBOL(cmxgcr_lock);
int ucc_set_qe_mux_mii_mng(unsigned int ucc_num) int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
{ {
...@@ -35,10 +36,10 @@ int ucc_set_qe_mux_mii_mng(unsigned int ucc_num) ...@@ -35,10 +36,10 @@ int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
if (ucc_num > UCC_MAX_NUM - 1) if (ucc_num > UCC_MAX_NUM - 1)
return -EINVAL; return -EINVAL;
spin_lock_irqsave(&ucc_lock, flags); spin_lock_irqsave(&cmxgcr_lock, flags);
clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG, clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT); ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
spin_unlock_irqrestore(&ucc_lock, flags); spin_unlock_irqrestore(&cmxgcr_lock, flags);
return 0; return 0;
} }
......
/*
* QE USB routines
*
* Copyright (c) Freescale Semicondutor, Inc. 2006.
* Shlomi Gridish <gridish@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
* Copyright (c) MontaVista Software, Inc. 2008.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
int qe_usb_clock_set(enum qe_clock clk, int rate)
{
struct qe_mux __iomem *mux = &qe_immr->qmx;
unsigned long flags;
u32 val;
switch (clk) {
case QE_CLK3: val = QE_CMXGCR_USBCS_CLK3; break;
case QE_CLK5: val = QE_CMXGCR_USBCS_CLK5; break;
case QE_CLK7: val = QE_CMXGCR_USBCS_CLK7; break;
case QE_CLK9: val = QE_CMXGCR_USBCS_CLK9; break;
case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
case QE_BRG9: val = QE_CMXGCR_USBCS_BRG9; break;
case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
default:
pr_err("%s: requested unknown clock %d\n", __func__, clk);
return -EINVAL;
}
if (qe_clock_is_brg(clk))
qe_setbrg(clk, rate, 1);
spin_lock_irqsave(&cmxgcr_lock, flags);
clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
spin_unlock_irqrestore(&cmxgcr_lock, flags);
return 0;
}
EXPORT_SYMBOL(qe_usb_clock_set);
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#define _ASM_POWERPC_QE_H #define _ASM_POWERPC_QE_H
#ifdef __KERNEL__ #ifdef __KERNEL__
#include <linux/spinlock.h>
#include <asm/immap_qe.h> #include <asm/immap_qe.h>
#define QE_NUM_OF_SNUM 28 #define QE_NUM_OF_SNUM 28
...@@ -74,6 +75,13 @@ enum qe_clock { ...@@ -74,6 +75,13 @@ enum qe_clock {
QE_CLK_DUMMY QE_CLK_DUMMY
}; };
static inline bool qe_clock_is_brg(enum qe_clock clk)
{
return clk >= QE_BRG1 && clk <= QE_BRG16;
}
extern spinlock_t cmxgcr_lock;
/* Export QE common operations */ /* Export QE common operations */
extern void qe_reset(void); extern void qe_reset(void);
extern int par_io_init(struct device_node *np); extern int par_io_init(struct device_node *np);
...@@ -156,6 +164,9 @@ int qe_upload_firmware(const struct qe_firmware *firmware); ...@@ -156,6 +164,9 @@ int qe_upload_firmware(const struct qe_firmware *firmware);
/* Obtain information on the uploaded firmware */ /* Obtain information on the uploaded firmware */
struct qe_firmware_info *qe_get_firmware_info(void); struct qe_firmware_info *qe_get_firmware_info(void);
/* QE USB */
int qe_usb_clock_set(enum qe_clock clk, int rate);
/* Buffer descriptors */ /* Buffer descriptors */
struct qe_bd { struct qe_bd {
__be16 status; __be16 status;
...@@ -254,6 +265,16 @@ enum comm_dir { ...@@ -254,6 +265,16 @@ enum comm_dir {
#define QE_CMXGCR_MII_ENET_MNG 0x00007000 #define QE_CMXGCR_MII_ENET_MNG 0x00007000
#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 #define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
#define QE_CMXGCR_USBCS 0x0000000f #define QE_CMXGCR_USBCS 0x0000000f
#define QE_CMXGCR_USBCS_CLK3 0x1
#define QE_CMXGCR_USBCS_CLK5 0x2
#define QE_CMXGCR_USBCS_CLK7 0x3
#define QE_CMXGCR_USBCS_CLK9 0x4
#define QE_CMXGCR_USBCS_CLK13 0x5
#define QE_CMXGCR_USBCS_CLK17 0x6
#define QE_CMXGCR_USBCS_CLK19 0x7
#define QE_CMXGCR_USBCS_CLK21 0x8
#define QE_CMXGCR_USBCS_BRG9 0x9
#define QE_CMXGCR_USBCS_BRG10 0xa
/* QE CECR Commands. /* QE CECR Commands.
*/ */
...@@ -283,7 +304,7 @@ enum comm_dir { ...@@ -283,7 +304,7 @@ enum comm_dir {
#define QE_HPAC_START_TX 0x0000060b #define QE_HPAC_START_TX 0x0000060b
#define QE_HPAC_START_RX 0x0000070b #define QE_HPAC_START_RX 0x0000070b
#define QE_USB_STOP_TX 0x0000000a #define QE_USB_STOP_TX 0x0000000a
#define QE_USB_RESTART_TX 0x0000000b #define QE_USB_RESTART_TX 0x0000000c
#define QE_QMC_STOP_TX 0x0000000c #define QE_QMC_STOP_TX 0x0000000c
#define QE_QMC_STOP_RX 0x0000000d #define QE_QMC_STOP_RX 0x0000000d
#define QE_SS7_SU_FIL_RESET 0x0000000e #define QE_SS7_SU_FIL_RESET 0x0000000e
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment