Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Ensure supplies are maintained for force enabled widgets
  ASoC: WM8994: Improve playback robustness
  ASoC: WM8994: Improve robustness in some use cases
  ASoC: WM8903: Fix mic detection enable logic
  ASoC: WM8903: Fix mic detection register definitions
  ASoC: CX20442: fix wrong reg_cache_default content
  ASoC: Sync initial widget state with hardware

include/sound/wm8903.h

@@ -17,13 +17,9 @@
 /*
  * R6 (0x06) - Mic Bias Control 0
  */
-#define WM8903_MICDET_HYST_ENA                  0x0080  /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_MASK             0x0080  /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_SHIFT                 7  /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_WIDTH                 1  /* MICDET_HYST_ENA */
-#define WM8903_MICDET_THR_MASK                  0x0070  /* MICDET_THR - [6:4] */
-#define WM8903_MICDET_THR_SHIFT                      4  /* MICDET_THR - [6:4] */
-#define WM8903_MICDET_THR_WIDTH                      3  /* MICDET_THR - [6:4] */
+#define WM8903_MICDET_THR_MASK                  0x0030  /* MICDET_THR - [5:4] */
+#define WM8903_MICDET_THR_SHIFT                      4  /* MICDET_THR - [5:4] */
+#define WM8903_MICDET_THR_WIDTH                      2  /* MICDET_THR - [5:4] */
 #define WM8903_MICSHORT_THR_MASK                0x000C  /* MICSHORT_THR - [3:2] */
 #define WM8903_MICSHORT_THR_SHIFT                    2  /* MICSHORT_THR - [3:2] */
 #define WM8903_MICSHORT_THR_WIDTH                    2  /* MICSHORT_THR - [3:2] */

sound/soc/codecs/cx20442.c

@@ -367,7 +367,7 @@ static int cx20442_codec_remove(struct snd_soc_codec *codec)
 	return 0;
 }
 
-static const u8 cx20442_reg = CX20442_TELOUT | CX20442_MIC;
+static const u8 cx20442_reg;
 
 static struct snd_soc_codec_driver cx20442_codec_dev = {
 	.probe = 	cx20442_codec_probe,

sound/soc/codecs/wm8903.c

@@ -1482,7 +1482,7 @@ int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
 			    WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
 			    irq_mask);
 
-	if (det && shrt) {
+	if (det || shrt) {
 		/* Enable mic detection, this may not have been set through
 		 * platform data (eg, if the defaults are OK). */
 		snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,

sound/soc/soc-dapm.c

@@ -712,7 +712,15 @@ static int dapm_supply_check_power(struct snd_soc_dapm_widget *w)
 		    !path->connected(path->source, path->sink))
 			continue;
 
-		if (path->sink && path->sink->power_check &&
+		if (!path->sink)
+			continue;
+
+		if (path->sink->force) {
+			power = 1;
+			break;
+		}
+
+		if (path->sink->power_check &&
 		    path->sink->power_check(path->sink)) {
 			power = 1;
 			break;
@@ -1627,6 +1635,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_add_routes);
 int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm)
 {
 	struct snd_soc_dapm_widget *w;
+	unsigned int val;
 
 	list_for_each_entry(w, &dapm->card->widgets, list)
 	{
@@ -1675,6 +1684,18 @@ int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm)
 		case snd_soc_dapm_post:
 			break;
 		}
+
+		/* Read the initial power state from the device */
+		if (w->reg >= 0) {
+			val = snd_soc_read(w->codec, w->reg);
+			val &= 1 << w->shift;
+			if (w->invert)
+				val = !val;
+
+			if (val)
+				w->power = 1;
+		}
+
 		w->new = 1;
 	}