ixgbe: add 1Gbps support for QSFP+

This patch adds GB speed support for QSFP+ modules.
Autonegotiation is not supported with QSFP+. The user will have to set
the desired speed on both link partners using ethtool advertise setting.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c

@@ -380,6 +380,11 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 	if (hw->phy.multispeed_fiber) {
 		*speed |= IXGBE_LINK_SPEED_10GB_FULL |
 			  IXGBE_LINK_SPEED_1GB_FULL;
+
+		/* QSFP must not enable auto-negotiation */
+		if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
+			*autoneg = false;
+		else
 			*autoneg = true;
 	}
 
@@ -700,13 +705,18 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 			goto out;
 
 		/* Set the module link speed */
-		if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) {
-			ixgbe_set_fiber_fixed_speed(hw,
-					IXGBE_LINK_SPEED_10GB_FULL);
-		} else {
+		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber:
 			esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
 			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 			IXGBE_WRITE_FLUSH(hw);
+			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects MAC link speed */
+			break;
+		default:
+			hw_dbg(hw, "Unexpected media type.\n");
+			break;
 		}
 
 		/* Allow module to change analog characteristics (1G->10G) */
@@ -757,14 +767,23 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 			goto out;
 
 		/* Set the module link speed */
-		if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) {
+		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber_fixed:
 			ixgbe_set_fiber_fixed_speed(hw,
 						IXGBE_LINK_SPEED_1GB_FULL);
-		} else {
+			break;
+		case ixgbe_media_type_fiber:
 			esdp_reg &= ~IXGBE_ESDP_SDP5;
 			esdp_reg |= IXGBE_ESDP_SDP5_DIR;
 			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 			IXGBE_WRITE_FLUSH(hw);
+			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects MAC link speed */
+			break;
+		default:
+			hw_dbg(hw, "Unexpected media type.\n");
+			break;
 		}
 
 		/* Allow module to change analog characteristics (10G->1G) */

drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

@@ -311,9 +311,6 @@ static int ixgbe_set_settings(struct net_device *netdev,
 		 * this function does not support duplex forcing, but can
 		 * limit the advertising of the adapter to the specified speed
 		 */
-		if (ecmd->autoneg == AUTONEG_DISABLE)
-			return -EINVAL;
-
 		if (ecmd->advertising & ~ecmd->supported)
 			return -EINVAL;
 

drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c

@@ -1205,6 +1205,12 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
 	if (status != 0)
 		goto err_read_i2c_eeprom;
 
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
+					     &comp_codes_1g);
+
+	if (status != 0)
+		goto err_read_i2c_eeprom;
+
 	if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
 		hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
 		if (hw->bus.lan_id == 0)