Merge branch 'bcmgenet-add-support-for-GENETv5'

Doug Berger says:

====================
net: bcmgenet: add support for GENETv5

This collection of patches contains changes related to adding
support for the BCM7260, BCM7268, and BCM7271 devices that
contain a new version of the GENET MAC IP block (v5) and a new
fast ethernet (10/100BASE-T) internal PHY.

These patches were originally developed on top of the bug fixes
of the "[PATCH v2 net 0/8] net: bcmgenet: minor bug fixes" patch
set previously accepted into the net repository, but this
submission is designed to be applied to the current net-next
that does not yet include them. As a result there will be some
merge conflicts that I would be happy to help resolve if desired.

Specifically, conflicts should occur with these patches from the
minor bug fixes set:
[PATCH v2 net 3/8] net: bcmgenet: reserved phy revisions must be checked first
[PATCH v2 net 5/8] net: bcmgenet: synchronize irq0 status between the isr and task
[PATCH v2 net 8/8] net: bcmgenet: decouple flow control from bcmgenet_tx_reclaim
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/brcm,bcmgenet.txt

@@ -2,11 +2,14 @@
 
 Required properties:
 - compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
-  "brcm,genet-v3", "brcm,genet-v4".
+  "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5".
 - reg: address and length of the register set for the device
-- interrupts: must be two cells, the first cell is the general purpose
-  interrupt line, while the second cell is the interrupt for the ring
-  RX and TX queues operating in ring mode
+- interrupts and/or interrupts-extended: must be two cells, the first cell
+  is the general purpose interrupt line, while the second cell is the
+  interrupt for the ring RX and TX queues operating in ring mode.  An
+  optional third interrupt cell for Wake-on-LAN can be specified.
+  See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+  for information on the property specifics.
 - phy-mode: see ethernet.txt file in the same directory
 - #address-cells: should be 1
 - #size-cells: should be 1
@@ -29,15 +32,15 @@ Optional properties:
 
 Required child nodes:
 
-- mdio bus node: this node should always be present regarless of the PHY
+- mdio bus node: this node should always be present regardless of the PHY
   configuration of the GENET instance
 
 MDIO bus node required properties:
 
 - compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
-  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", the version has to match the
-  parent node compatible property (e.g: brcm,genet-v4 pairs with
-  brcm,genet-mdio-v4)
+  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version
+  has to match the parent node compatible property (e.g: brcm,genet-v4 pairs
+  with brcm,genet-mdio-v4)
 - reg: address and length relative to the parent node base register address
 - #address-cells: address cell for MDIO bus addressing, should be 1
 - #size-cells: size of the cells for MDIO bus addressing, should be 0

Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt

@@ -2,8 +2,9 @@
 
 Required properties:
 - compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2",
-  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4" or "brcm,unimac-mdio"
-- reg: address and length of the regsiter set for the device, first one is the
+  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5" or
+  "brcm,unimac-mdio"
+- reg: address and length of the register set for the device, first one is the
   base register, and the second one is optional and for indirect accesses to
   larger than 16-bits MDIO transactions
 - reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw"

drivers/net/ethernet/broadcom/genet/bcmgenet.h

 /*
- * Copyright (c) 2014 Broadcom Corporation
+ * Copyright (c) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -351,8 +351,14 @@ struct bcmgenet_mib_counters {
 #define  EXT_PWR_DN_EN_LD		(1 << 3)
 #define  EXT_ENERGY_DET			(1 << 4)
 #define  EXT_IDDQ_FROM_PHY		(1 << 5)
+#define  EXT_IDDQ_GLBL_PWR		(1 << 7)
 #define  EXT_PHY_RESET			(1 << 8)
 #define  EXT_ENERGY_DET_MASK		(1 << 12)
+#define  EXT_PWR_DOWN_PHY_TX		(1 << 16)
+#define  EXT_PWR_DOWN_PHY_RX		(1 << 17)
+#define  EXT_PWR_DOWN_PHY_SD		(1 << 18)
+#define  EXT_PWR_DOWN_PHY_RD		(1 << 19)
+#define  EXT_PWR_DOWN_PHY_EN		(1 << 20)
 
 #define EXT_RGMII_OOB_CTRL		0x0C
 #define  RGMII_LINK			(1 << 4)
@@ -495,13 +501,15 @@ enum bcmgenet_version {
 	GENET_V1 = 1,
 	GENET_V2,
 	GENET_V3,
-	GENET_V4
+	GENET_V4,
+	GENET_V5
 };
 
 #define GENET_IS_V1(p)	((p)->version == GENET_V1)
 #define GENET_IS_V2(p)	((p)->version == GENET_V2)
 #define GENET_IS_V3(p)	((p)->version == GENET_V3)
 #define GENET_IS_V4(p)	((p)->version == GENET_V4)
+#define GENET_IS_V5(p)	((p)->version == GENET_V5)
 
 /* Hardware flags */
 #define GENET_HAS_40BITS	(1 << 0)

drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c

 /*
  * Broadcom GENET (Gigabit Ethernet) Wake-on-LAN support
  *
- * Copyright (c) 2014 Broadcom Corporation
+ * Copyright (c) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -127,7 +127,6 @@ int bcmgenet_wol_power_down_cfg(struct bcmgenet_priv *priv,
 				enum bcmgenet_power_mode mode)
 {
 	struct net_device *dev = priv->dev;
-	u32 cpu_mask_clear;
 	int retries = 0;
 	u32 reg;
 
@@ -173,18 +172,12 @@ int bcmgenet_wol_power_down_cfg(struct bcmgenet_priv *priv,
 		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
 	}
 
-	/* Enable the MPD interrupt */
-	cpu_mask_clear = UMAC_IRQ_MPD_R;
-
-	bcmgenet_intrl2_0_writel(priv, cpu_mask_clear, INTRL2_CPU_MASK_CLEAR);
-
 	return 0;
 }
 
 void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv,
 			       enum bcmgenet_power_mode mode)
 {
-	u32 cpu_mask_set;
 	u32 reg;
 
 	if (mode != GENET_POWER_WOL_MAGIC) {
@@ -201,10 +194,4 @@ void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv,
 	reg &= ~CMD_CRC_FWD;
 	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
 	priv->crc_fwd_en = 0;
-
-	/* Stop monitoring magic packet IRQ */
-	cpu_mask_set = UMAC_IRQ_MPD_R;
-
-	/* Stop monitoring magic packet IRQ */
-	bcmgenet_intrl2_0_writel(priv, cpu_mask_set, INTRL2_CPU_MASK_SET);
 }

drivers/net/ethernet/broadcom/genet/bcmmii.c

 /*
  * Broadcom GENET MDIO routines
  *
- * Copyright (c) 2014 Broadcom Corporation
+ * Copyright (c) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -195,9 +195,7 @@ void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
 	u32 reg = 0;
 
 	/* EXT_GPHY_CTRL is only valid for GENETv4 and onward */
-	if (!GENET_IS_V4(priv))
-		return;
-
+	if (GENET_IS_V4(priv)) {
 		reg = bcmgenet_ext_readl(priv, EXT_GPHY_CTRL);
 		if (enable) {
 			reg &= ~EXT_CK25_DIS;
@@ -211,13 +209,17 @@ void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
 
 			reg &= ~EXT_GPHY_RESET;
 		} else {
-		reg |= EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN | EXT_GPHY_RESET;
+			reg |= EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN |
+			       EXT_GPHY_RESET;
 			bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
 			mdelay(1);
 			reg |= EXT_CK25_DIS;
 		}
 		bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
 		udelay(60);
+	} else {
+		mdelay(1);
+	}
 }
 
 static void bcmgenet_internal_phy_setup(struct net_device *dev)
@@ -227,10 +229,12 @@ static void bcmgenet_internal_phy_setup(struct net_device *dev)
 
 	/* Power up PHY */
 	bcmgenet_phy_power_set(dev, true);
+	if (!GENET_IS_V5(priv)) {
 		/* enable APD */
 		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
 		reg |= EXT_PWR_DN_EN_LD;
 		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
+	}
 	bcmgenet_mii_reset(dev);
 }
 
@@ -238,10 +242,12 @@ static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
 {
 	u32 reg;
 
+	if (!GENET_IS_V5(priv)) {
 		/* Speed settings are set in bcmgenet_mii_setup() */
 		reg = bcmgenet_sys_readl(priv, SYS_PORT_CTRL);
 		reg |= LED_ACT_SOURCE_MAC;
 		bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL);
+	}
 
 	if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
 		fixed_phy_set_link_update(priv->phydev,

drivers/net/phy/bcm-phy-lib.c

 /*
- * Copyright (C) 2015 Broadcom Corporation
+ * Copyright (C) 2015-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -221,9 +221,9 @@ int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
 		return val;
 
 	if (enable)
-		val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+		val |= (MDIO_EEE_100TX | MDIO_EEE_1000T);
 	else
-		val &= ~(MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+		val &= ~(MDIO_EEE_100TX | MDIO_EEE_1000T);
 
 	phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
 			       MDIO_MMD_AN, (u32)val);

drivers/net/phy/bcm7xxx.c

 /*
  * Broadcom BCM7xxx internal transceivers support.
  *
- * Copyright (C) 2014, Broadcom Corporation
+ * Copyright (C) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -19,7 +19,7 @@
 
 /* Broadcom BCM7xxx internal PHY registers */
 
-/* 40nm only register definitions */
+/* EPHY only register definitions */
 #define MII_BCM7XXX_100TX_AUX_CTL	0x10
 #define MII_BCM7XXX_100TX_FALSE_CAR	0x13
 #define MII_BCM7XXX_100TX_DISC		0x14
@@ -27,6 +27,19 @@
 #define  MII_BCM7XXX_64CLK_MDIO		BIT(12)
 #define MII_BCM7XXX_TEST		0x1f
 #define  MII_BCM7XXX_SHD_MODE_2		BIT(2)
+#define MII_BCM7XXX_SHD_2_ADDR_CTRL	0xe
+#define MII_BCM7XXX_SHD_2_CTRL_STAT	0xf
+#define MII_BCM7XXX_SHD_2_BIAS_TRIM	0x1a
+#define MII_BCM7XXX_SHD_3_AN_EEE_ADV	0x3
+#define MII_BCM7XXX_SHD_3_PCS_CTRL_2	0x6
+#define  MII_BCM7XXX_PCS_CTRL_2_DEF	0x4400
+#define MII_BCM7XXX_SHD_3_AN_STAT	0xb
+#define  MII_BCM7XXX_AN_NULL_MSG_EN	BIT(0)
+#define  MII_BCM7XXX_AN_EEE_EN		BIT(1)
+#define MII_BCM7XXX_SHD_3_EEE_THRESH	0xe
+#define  MII_BCM7XXX_EEE_THRESH_DEF	0x50
+#define MII_BCM7XXX_SHD_3_TL4		0x23
+#define  MII_BCM7XXX_TL4_RST_MSK	(BIT(2) | BIT(1))
 
 /* 28nm only register definitions */
 #define MISC_ADDR(base, channel)	base, channel
@@ -286,6 +299,181 @@ static int phy_set_clr_bits(struct phy_device *dev, int location,
 	return v;
 }
 
+static int bcm7xxx_28nm_ephy_01_afe_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	/* set shadow mode 2 */
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
+			       MII_BCM7XXX_SHD_MODE_2, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Set current trim values INT_trim = -1, Ext_trim =0 */
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_BIAS_TRIM, 0x3BE0);
+	if (ret < 0)
+		goto reset_shadow_mode;
+
+	/* Cal reset */
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+			MII_BCM7XXX_SHD_3_TL4);
+	if (ret < 0)
+		goto reset_shadow_mode;
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+			       MII_BCM7XXX_TL4_RST_MSK, 0);
+	if (ret < 0)
+		goto reset_shadow_mode;
+
+	/* Cal reset disable */
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+			MII_BCM7XXX_SHD_3_TL4);
+	if (ret < 0)
+		goto reset_shadow_mode;
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+			       0, MII_BCM7XXX_TL4_RST_MSK);
+	if (ret < 0)
+		goto reset_shadow_mode;
+
+reset_shadow_mode:
+	/* reset shadow mode 2 */
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
+			       MII_BCM7XXX_SHD_MODE_2);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/* The 28nm EPHY does not support Clause 45 (MMD) used by bcm-phy-lib */
+static int bcm7xxx_28nm_ephy_apd_enable(struct phy_device *phydev)
+{
+	int ret;
+
+	/* set shadow mode 1 */
+	ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST,
+			       MII_BRCM_FET_BT_SRE, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Enable auto-power down */
+	ret = phy_set_clr_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+			       MII_BRCM_FET_SHDW_AS2_APDE, 0);
+	if (ret < 0)
+		return ret;
+
+	/* reset shadow mode 1 */
+	ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, 0,
+			       MII_BRCM_FET_BT_SRE);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int bcm7xxx_28nm_ephy_eee_enable(struct phy_device *phydev)
+{
+	int ret;
+
+	/* set shadow mode 2 */
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
+			       MII_BCM7XXX_SHD_MODE_2, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Advertise supported modes */
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+			MII_BCM7XXX_SHD_3_AN_EEE_ADV);
+	if (ret < 0)
+		goto reset_shadow_mode;
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+			MDIO_EEE_100TX);
+	if (ret < 0)
+		goto reset_shadow_mode;
+
+	/* Restore Defaults */
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+			MII_BCM7XXX_SHD_3_PCS_CTRL_2);
+	if (ret < 0)
+		goto reset_shadow_mode;
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+			MII_BCM7XXX_PCS_CTRL_2_DEF);
+	if (ret < 0)
+		goto reset_shadow_mode;
+
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+			MII_BCM7XXX_SHD_3_EEE_THRESH);
+	if (ret < 0)
+		goto reset_shadow_mode;
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+			MII_BCM7XXX_EEE_THRESH_DEF);
+	if (ret < 0)
+		goto reset_shadow_mode;
+
+	/* Enable EEE autonegotiation */
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
+			MII_BCM7XXX_SHD_3_AN_STAT);
+	if (ret < 0)
+		goto reset_shadow_mode;
+	ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
+			(MII_BCM7XXX_AN_NULL_MSG_EN | MII_BCM7XXX_AN_EEE_EN));
+	if (ret < 0)
+		goto reset_shadow_mode;
+
+reset_shadow_mode:
+	/* reset shadow mode 2 */
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
+			       MII_BCM7XXX_SHD_MODE_2);
+	if (ret < 0)
+		return ret;
+
+	/* Restart autoneg */
+	phy_write(phydev, MII_BMCR,
+		  (BMCR_SPEED100 | BMCR_ANENABLE | BMCR_ANRESTART));
+
+	return 0;
+}
+
+static int bcm7xxx_28nm_ephy_config_init(struct phy_device *phydev)
+{
+	u8 rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
+	int ret = 0;
+
+	pr_info_once("%s: %s PHY revision: 0x%02x\n",
+		     phydev_name(phydev), phydev->drv->name, rev);
+
+	/* Dummy read to a register to workaround a possible issue upon reset
+	 * where the internal inverter may not allow the first MDIO transaction
+	 * to pass the MDIO management controller and make us return 0xffff for
+	 * such reads.
+	 */
+	phy_read(phydev, MII_BMSR);
+
+	/* Apply AFE software work-around if necessary */
+	if (rev == 0x01) {
+		ret = bcm7xxx_28nm_ephy_01_afe_config_init(phydev);
+		if (ret)
+			return ret;
+	}
+
+	ret = bcm7xxx_28nm_ephy_eee_enable(phydev);
+	if (ret)
+		return ret;
+
+	return bcm7xxx_28nm_ephy_apd_enable(phydev);
+}
+
+static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Re-apply workarounds coming out suspend/resume */
+	ret = bcm7xxx_28nm_ephy_config_init(phydev);
+	if (ret)
+		return ret;
+
+	return genphy_config_aneg(phydev);
+}
+
 static int bcm7xxx_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -434,6 +622,23 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.probe		= bcm7xxx_28nm_probe,				\
 }
 
+#define BCM7XXX_28NM_EPHY(_oui, _name)					\
+{									\
+	.phy_id		= (_oui),					\
+	.phy_id_mask	= 0xfffffff0,					\
+	.name		= _name,					\
+	.features	= PHY_BASIC_FEATURES,				\
+	.flags		= PHY_IS_INTERNAL,				\
+	.config_init	= bcm7xxx_28nm_ephy_config_init,		\
+	.config_aneg	= genphy_config_aneg,				\
+	.read_status	= genphy_read_status,				\
+	.resume		= bcm7xxx_28nm_ephy_resume,			\
+	.get_sset_count	= bcm_phy_get_sset_count,			\
+	.get_strings	= bcm_phy_get_strings,				\
+	.get_stats	= bcm7xxx_28nm_get_phy_stats,			\
+	.probe		= bcm7xxx_28nm_probe,				\
+}
+
 #define BCM7XXX_40NM_EPHY(_oui, _name)					\
 {									\
 	.phy_id         = (_oui),					\
@@ -450,6 +655,9 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 
 static struct phy_driver bcm7xxx_driver[] = {
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
+	BCM7XXX_28NM_EPHY(PHY_ID_BCM7260, "Broadcom BCM7260"),
+	BCM7XXX_28NM_EPHY(PHY_ID_BCM7268, "Broadcom BCM7268"),
+	BCM7XXX_28NM_EPHY(PHY_ID_BCM7271, "Broadcom BCM7271"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
@@ -466,6 +674,9 @@ static struct phy_driver bcm7xxx_driver[] = {
 
 static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
 	{ PHY_ID_BCM7250, 0xfffffff0, },
+	{ PHY_ID_BCM7260, 0xfffffff0, },
+	{ PHY_ID_BCM7268, 0xfffffff0, },
+	{ PHY_ID_BCM7271, 0xfffffff0, },
 	{ PHY_ID_BCM7278, 0xfffffff0, },
 	{ PHY_ID_BCM7364, 0xfffffff0, },
 	{ PHY_ID_BCM7366, 0xfffffff0, },

drivers/net/phy/mdio-bcm-unimac.c

 /*
  * Broadcom UniMAC MDIO bus controller driver
  *
- * Copyright (C) 2014, Broadcom Corporation
+ * Copyright (C) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -228,6 +228,7 @@ static int unimac_mdio_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id unimac_mdio_ids[] = {
+	{ .compatible = "brcm,genet-mdio-v5", },
 	{ .compatible = "brcm,genet-mdio-v4", },
 	{ .compatible = "brcm,genet-mdio-v3", },
 	{ .compatible = "brcm,genet-mdio-v2", },

include/linux/brcmphy.h

@@ -25,6 +25,9 @@
 #define PHY_ID_BCM57780			0x03625d90
 
 #define PHY_ID_BCM7250			0xae025280
+#define PHY_ID_BCM7260			0xae025190
+#define PHY_ID_BCM7268			0xae025090
+#define PHY_ID_BCM7271			0xae0253b0
 #define PHY_ID_BCM7278			0xae0251a0
 #define PHY_ID_BCM7364			0xae025260
 #define PHY_ID_BCM7366			0x600d8490