Merge http://linux-isdn.bkbits.net/linux-2.5.make

into home.transmeta.com:/home/torvalds/v2.5/linux

Makefile

@@ -37,14 +37,21 @@ OBJDUMP		= $(CROSS_COMPILE)objdump
 MAKEFILES	= $(TOPDIR)/.config
 GENKSYMS	= /sbin/genksyms
 DEPMOD		= /sbin/depmod
+PERL		= perl
 MODFLAGS	= -DMODULE
+CFLAGS_MODULE   = $(MODFLAGS)
+AFLAGS_MODULE   =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
-PERL		= perl
+EXPORT_FLAGS    =
 
 export	VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION KERNELRELEASE ARCH \
 	CONFIG_SHELL TOPDIR HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
-	CPP AR NM STRIP OBJCOPY OBJDUMP MAKE MAKEFILES GENKSYMS MODFLAGS PERL
+	CPP AR NM STRIP OBJCOPY OBJDUMP MAKE MAKEFILES GENKSYMS PERL
+
+export CPPFLAGS EXPORT_FLAGS
+export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE 
+export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 
 all:	do-it-all
 
@@ -92,6 +99,10 @@ CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
 	  -fomit-frame-pointer -fno-strict-aliasing -fno-common
 AFLAGS := -D__ASSEMBLY__ $(CPPFLAGS)
 
+ifdef CONFIG_MODULES
+EXPORT_FLAGS := -DEXPORT_SYMTAB
+endif
+
 INIT		=init/init.o
 CORE_FILES	=kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o
 NETWORKS	=net/network.o
@@ -155,8 +166,6 @@ DRIVERS := $(DRIVERS-y)
 
 include arch/$(ARCH)/Makefile
 
-export	CPPFLAGS CFLAGS CFLAGS_KERNEL AFLAGS AFLAGS_KERNEL
-
 export	NETWORKS DRIVERS LIBS HEAD LDFLAGS LINKFLAGS MAKEBOOT ASFLAGS
 
 # boot target
@@ -287,7 +296,7 @@ modules: $(patsubst %, _mod_%, $(SUBDIRS))
 
 .PHONY: $(patsubst %, _mod_%, $(SUBDIRS))
 $(patsubst %, _mod_%, $(SUBDIRS)) : include/linux/version.h include/config/MARKER
-	@$(MAKE) -C $(patsubst _mod_%, %, $@) CFLAGS="$(CFLAGS) $(MODFLAGS)" MAKING_MODULES=1 modules
+	@$(MAKE) -C $(patsubst _mod_%, %, $@) CFLAGS="$(CFLAGS) $(CFLAGS_MODULE)" AFLAGS="$(AFLAGS) $(AFLAGS_MODULE)" modules
 
 #	Install modules
 

Rules.make

@@ -29,19 +29,17 @@ unexport subdir-y
 unexport subdir-m
 unexport subdir-n
 unexport subdir-
+unexport mod-subdirs
 
 comma	:= ,
 
-#
+# Figure out what we need to build from the various variables
+# ===========================================================================
+
 # When an object is listed to be built compiled-in and modular,
 # only build the compiled-in version
-#
-obj-m := $(filter-out $(obj-y),$(obj-m))
 
-#
-# Get things started.
-#
-first_rule: all_targets
+obj-m := $(filter-out $(obj-y),$(obj-m))
 
 # Handle objects in subdirs
 # ---------------------------------------------------------------------------
@@ -69,6 +67,42 @@ SUB_DIRS	:= $(subdir-y)
 MOD_SUB_DIRS	:= $(sort $(subdir-m) $(both-m))
 ALL_SUB_DIRS	:= $(sort $(subdir-y) $(subdir-m) $(subdir-n) $(subdir-))
 
+# export.o is never a composite object, since $(export-objs) has a
+# fixed meaning (== objects which EXPORT_SYMBOL())
+__obj-y = $(filter-out export.o,$(obj-y))
+__obj-m = $(filter-out export.o,$(obj-m))
+
+# if $(foo-objs) exists, foo.o is a composite object 
+__multi-used-y := $(sort $(foreach m,$(__obj-y), $(if $($(m:.o=-objs)), $(m))))
+__multi-used-m := $(sort $(foreach m,$(__obj-m), $(if $($(m:.o=-objs)), $(m))))
+
+# FIXME: Rip this out later
+# Backwards compatibility: if a composite object is listed in
+# $(list-multi), skip it here, since the Makefile will have an explicit
+# link rule for it
+
+multi-used-y := $(filter-out $(list-multi),$(__multi-used-y))
+multi-used-m := $(filter-out $(list-multi),$(__multi-used-m))
+
+# Build list of the parts of our composite objects, our composite
+# objects depend on those (obviously)
+multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)))
+multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)))
+
+# $(subdir-obj-y) is the list of objects in $(obj-y) which do not live
+# in the local directory
+subdir-obj-y := $(foreach o,$(obj-y),$(if $(filter-out $(o),$(notdir $(o))),$(o)))
+
+# Replace multi-part objects by their individual parts, look at local dir only
+real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $($(m:.o=-objs)),$($(m:.o=-objs)),$(m)))
+real-objs-m := $(foreach m, $(obj-m), $(if $($(m:.o=-objs)),$($(m:.o=-objs)),$(m)))
+
+# ==========================================================================
+#
+# Get things started.
+#
+first_rule: all_targets
+
 #
 # Common rules
 #
@@ -76,7 +110,7 @@ ALL_SUB_DIRS	:= $(sort $(subdir-y) $(subdir-m) $(subdir-n) $(subdir-))
 # Compile C sources (.c)
 # ---------------------------------------------------------------------------
 
-# export_flags will be set to -DEXPORT_SYMBOL for objects in $(export-objs)
+$(export-objs): export_flags := $(EXPORT_FLAGS)
 
 c_flags = $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$(*F).o) -DKBUILD_BASENAME=$(subst $(comma),_,$(subst -,_,$(*F))) $(export_flags)
 
@@ -95,7 +129,6 @@ cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
 %.o: %.c dummy
 	$(call if_changed,cmd_cc_o_c)
 
-
 # Compile assembler sources (.S)
 # ---------------------------------------------------------------------------
 
@@ -121,10 +154,7 @@ cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
 #
 all_targets: $(O_TARGET) $(L_TARGET) sub_dirs
 
-# $(subdir-obj-y) is the list of objects in $(obj-y) which do not live
-# in the local directory
-subdir-obj-y := $(foreach o,$(obj-y),$(if $(filter-out $(o),$(notdir $(o))),$(o)))
-# Do build these objects, we need to descend into the directories
+# To build objects in subdirs, we need to descend into the directories
 $(subdir-obj-y): sub_dirs
 
 #
@@ -154,26 +184,6 @@ endif
 # Rule to link composite objects
 #
 
-# export.o is never a composite object, since $(export-objs) has a
-# fixed meaning (== objects which EXPORT_SYMBOL())
-__obj-y = $(filter-out export.o,$(obj-y))
-__obj-m = $(filter-out export.o,$(obj-m))
-
-# if $(foo-objs) exists, foo.o is a composite object 
-__multi-used-y := $(sort $(foreach m,$(__obj-y), $(if $($(basename $(m))-objs), $(m))))
-__multi-used-m := $(sort $(foreach m,$(__obj-m), $(if $($(basename $(m))-objs), $(m))))
-
-# Backwards compatibility: if a composite object is listed in
-# $(list-multi), skip it here, since the Makefile will have an explicit
-# link rule for it
-
-multi-used-y := $(filter-out $(list-multi),$(__multi-used-y))
-multi-used-m := $(filter-out $(list-multi),$(__multi-used-m))
-
-# Build list of the parts of our composite objects, our composite
-# objects depend on those (obviously)
-multi-objs-y := $(foreach m, $(multi-used-y), $($(basename $(m))-objs))
-multi-objs-m := $(foreach m, $(multi-used-m), $($(basename $(m))-objs))
 
 cmd_link_multi = $(LD) $(EXTRA_LDFLAGS) -r -o $@ $(filter $($(basename $@)-objs),$^)
 
@@ -337,7 +347,6 @@ endif # CONFIG_MODVERSIONS
 ifneq "$(strip $(export-objs))" ""
 
 $(export-objs): $(TOPDIR)/include/linux/modversions.h
-$(export-objs): export_flags := -DEXPORT_SYMTAB
 
 endif
 

arch/alpha/Makefile

@@ -96,7 +96,7 @@ SUBDIRS := $(SUBDIRS) arch/alpha/kernel arch/alpha/mm arch/alpha/lib \
 CORE_FILES := arch/alpha/kernel/kernel.o arch/alpha/mm/mm.o $(CORE_FILES)
 
 ifeq ($(CONFIG_MATHEMU),y)
-  CORE_FILES := $(CORE_FILES) arch/alpha/math-emu/math-emu.o
+  CORE_FILES := $(CORE_FILES) arch/alpha/math-emu/built-in.o
 endif
 
 LIBS := $(TOPDIR)/arch/alpha/lib/lib.a $(LIBS) $(TOPDIR)/arch/alpha/lib/lib.a

arch/alpha/math-emu/Makefile

@@ -2,18 +2,12 @@
 # Makefile for the FPU instruction emulation.
 #
 
-CFLAGS += -I. -I$(TOPDIR)/include/math-emu -w
-
-ifeq ($(CONFIG_MATHEMU),y)
+O_TARGET := built-in.o
 
-O_TARGET	:= math-emu.o
-obj-y		:= math.o qrnnd.o
-
-else
+obj-$(CONFIG_MATHEMU) += math-emu.o
 
 math-emu-objs	:= math.o qrnnd.o
-obj-m		:= math-emu.o
 
-endif
+CFLAGS += -I. -I$(TOPDIR)/include/math-emu -w
 
 include $(TOPDIR)/Rules.make

arch/parisc/kernel/Makefile

@@ -9,15 +9,9 @@
 
 all: kernel.o init_task.o pdc_cons.o process.o head.o
 O_TARGET = kernel.o
-O_OBJS = 
 
 # Object file lists.
 
-obj-y		:=
-obj-m		:=
-obj-n		:=
-obj-		:=
-
 obj-y		+= cache.o setup.o traps.o time.o irq.o \
 		syscall.o entry.o sys_parisc.o pdc.o ptrace.o hardware.o \
 		inventory.o drivers.o semaphore.o pa7300lc.o pci-dma.o \
@@ -38,15 +32,6 @@ obj-$(CONFIG_IOMMU_SBA) += sba_iommu.o
 # obj-$(CONFIG_IOMMU_CCIO) += ccio-rm-dma.o
 obj-$(CONFIG_IOMMU_CCIO) += ccio-dma.o
 
-.o.S:	$(CC) -D__ASSEMBLY__ $(AFLAGS) -traditional -c $*.S -o $*.o
-
-# Translate to Rules.make lists.
-
-O_OBJS          := $(filter-out $(export-objs), $(obj-y))
-OX_OBJS         := $(filter     $(export-objs), $(obj-y))
-M_OBJS          := $(sort $(filter-out $(export-objs), $(obj-m)))
-MX_OBJS         := $(sort $(filter     $(export-objs), $(obj-m)))
-MI_OBJS		:= $(sort $(filter-out $(export-objs), $(int-m)))
-MIX_OBJS	:= $(sort $(filter     $(export-objs), $(int-m)))
+EXTRA_AFLAGS := -traditional
 
 include $(TOPDIR)/Rules.make

arch/sparc64/solaris/Makefile

@@ -5,7 +5,7 @@
 EXTRA_AFLAGS := -ansi
 
 ifeq ($(CONFIG_SOLARIS_EMUL),m)
-  EXTRA_AFLAGS += $(MODFLAGS)
+  EXTRA_AFLAGS += $(CFLAGS_MODULE) # FIXME
 endif
 
 solaris-objs := entry64.o fs.o misc.o signal.o systbl.o socket.o \

drivers/char/Makefile

@@ -150,13 +150,7 @@ obj-$(CONFIG_SPECIALIX) += specialix.o
 obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
 obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
 obj-$(CONFIG_SX) += sx.o generic_serial.o
-
-obj-$(CONFIG_RIO) += generic_serial.o
-subdir-$(CONFIG_RIO) += rio
-ifeq ($(CONFIG_RIO),y)
-  obj-y += rio/rio.o
-endif
-
+obj-$(CONFIG_RIO) += rio/ generic_serial.o
 obj-$(CONFIG_SH_SCI) += sh-sci.o generic_serial.o
 obj-$(CONFIG_SERIAL167) += serial167.o
 obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
@@ -223,10 +217,7 @@ obj-$(CONFIG_SH_WDT) += shwdt.o
 obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
 
-subdir-$(CONFIG_MWAVE) += mwave
-ifeq ($(CONFIG_MWAVE),y)
-  obj-y += mwave/mwave.o
-endif
+obj-$(CONFIG_MWAVE) += mwave/
 
 subdir-$(CONFIG_AGP) += agp
 ifeq ($(CONFIG_AGP),y)

drivers/char/ftape/Makefile

@@ -25,20 +25,8 @@
 
 O_TARGET := ftape.o
 
-subdir-$(CONFIG_FTAPE) += lowlevel
-subdir-$(CONFIG_ZFTAPE) += zftape
-subdir-$(CONFIG_ZFT_COMPRESSOR) += compressor
-
-ifeq ($(CONFIG_FTAPE),y)
-  obj-y    += lowlevel/ftape.o
-endif
-
-ifeq ($(CONFIG_ZFTAPE),y)
-  obj-y   += zftape/zftape.o
-endif
-
-ifeq ($(CONFIG_ZFT_COMPRESSOR),y)
-  obj-y += compressor/zft-compressor.o
-endif
+obj-$(CONFIG_FTAPE)		+= lowlevel/
+obj-$(CONFIG_ZFTAPE)		+= zftape/
+obj-$(CONFIG_ZFT_COMPRESSOR)	+= compressor/
 
 include $(TOPDIR)/Rules.make

drivers/char/ftape/compressor/Makefile

@@ -24,11 +24,11 @@
 #      Linux.
 #
 
-O_TARGET := zft-compressor.o
+O_TARGET := built-in.o
 
-obj-y    = zftape-compress.o lzrw3.o
+obj-$(CONFIG_ZFT_COMPRESSOR) += zft-compressor.o
 
-obj-m    = $(O_TARGET)
+zft-compressor-objs := zftape-compress.o lzrw3.o
 
 CFLAGS_lzrw3.o	:= -O6 -funroll-all-loops
 

drivers/char/ftape/lowlevel/Makefile

@@ -23,28 +23,28 @@
 #      driver for Linux.
 #
 
-O_TARGET := ftape.o
+O_TARGET := built-in.o
 
 export-objs := ftape_syms.o
 
-obj-y     = ftape-init.o fdc-io.o fdc-isr.o \
+obj-$(CONFIG_FTAPE) += ftape.o
+
+ftape-objs := ftape-init.o fdc-io.o fdc-isr.o \
 	      ftape-bsm.o ftape-ctl.o ftape-read.o ftape-rw.o \
 	      ftape-write.o ftape-io.o ftape-calibr.o ftape-ecc.o fc-10.o \
 	      ftape-buffer.o ftape-format.o ftape_syms.o
 
-obj-$(CONFIG_FTAPE) += ftape-setup.o
+ifeq ($(CONFIG_FTAPE),y)
+ftape-objs += ftape-setup.o
+endif
 
 ifndef CONFIG_FT_NO_TRACE_AT_ALL
-obj-y   += ftape-tracing.o
+ftape-objs += ftape-tracing.o
 endif
 
-ifeq ($(CONFIG_PROC_FS),y)
 ifeq ($(CONFIG_FT_PROC_FS),y)
-obj-y += ftape-proc.o
+ftape-objs += ftape-proc.o
 endif
-endif
-
-obj-m  = $(O_TARGET)
 
 include $(TOPDIR)/Rules.make
 

drivers/char/ftape/zftape/Makefile

@@ -27,17 +27,17 @@
 # ZFT_OBSOLETE - enable the MTIOC_ZFTAPE_GETBLKSZ ioctl. You should
 #                leave this enabled for compatibility with taper.
 
-EXTRA_CFLAGS := -DZFT_OBSOLETE
-
-O_TARGET := zftape.o
+O_TARGET := built-in.o
 
 export-objs := zftape_syms.o
 
-obj-y    := zftape-rw.o zftape-ctl.o zftape-read.o \
+obj-$(CONFIG_ZFTAPE) += zftape.o
+
+zftape-objs := zftape-rw.o zftape-ctl.o zftape-read.o \
 	       zftape-write.o zftape-vtbl.o zftape-eof.o \
 	       zftape-init.o zftape-buffers.o zftape_syms.o
 
-obj-m    := $(O_TARGET)
+EXTRA_CFLAGS := -DZFT_OBSOLETE
 
 include $(TOPDIR)/Rules.make
 

drivers/char/mwave/Makefile

@@ -3,23 +3,17 @@
 #
 # See the README file in this directory for more info. <paulsch@us.ibm.com>
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now inherited from the
-# parent makes..
-#
 
-# To compile in lots (~20 KiB) of run-time enablable printk()s for debugging:
-EXTRA_CFLAGS += -DMW_TRACE
+O_TARGET := built-in.o
+
+obj-$(CONFIG_MWAVE) += mwave.o
+
+mwave-objs := mwavedd.o smapi.o tp3780i.o 3780i.o
 
 # To have the mwave driver disable other uarts if necessary
 # EXTRA_CFLAGS += -DMWAVE_FUTZ_WITH_OTHER_DEVICES
 
-O_TARGET := mwave.o
-
-obj-y	:= mwavedd.o smapi.o tp3780i.o 3780i.o
-obj-m	:= $(O_TARGET)
+# To compile in lots (~20 KiB) of run-time enablable printk()s for debugging:
+EXTRA_CFLAGS += -DMW_TRACE
 
 include $(TOPDIR)/Rules.make

drivers/char/rio/Makefile

@@ -5,17 +5,12 @@
 # 
 # This file is GPL. See other files for the full Blurb. I'm lazy today. 
 #
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
-O_TARGET := rio.o
+O_TARGET := built-in.o
+
+obj-$(CONFIG_RIO) += rio.o
 
-obj-y   := rio_linux.o rioinit.o rioboot.o riocmd.o rioctrl.o riointr.o \
+rio-objs := rio_linux.o rioinit.o rioboot.o riocmd.o rioctrl.o riointr.o \
             rioparam.o riopcicopy.o rioroute.o riotable.o riotty.o
-obj-m   := $(O_TARGET)
 
 include $(TOPDIR)/Rules.make

drivers/ide/ide.c

@@ -688,7 +688,6 @@ u8 ide_dump_status(struct ata_device *drive, struct request * rq, const char *ms
 {
 	unsigned long flags;
 	byte err = 0;
-	int i;
 
 	__save_flags (flags);	/* local CPU only */
 	ide__sti();		/* local CPU only */

drivers/tc/Makefile

 #
 # Makefile for the linux kernel.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
@@ -14,28 +9,10 @@ export-objs	:= tc.o
 
 # Object file lists.
 
-obj-y		:=
-obj-m		:=
-obj-n		:=
-obj-		:=
-
 obj-$(CONFIG_TC) += tc.o
 obj-$(CONFIG_ZS) += zs.o
 obj-$(CONFIG_VT) += lk201.o lk201-map.o lk201-remap.o
 
-# Files that are both resident and modular: remove from modular.
-
-obj-m		:= $(filter-out $(obj-y), $(obj-m))
-
-# Translate to Rules.make lists.
-
-L_TARGET	:= tc.a
-
-L_OBJS		:= $(sort $(filter-out $(export-objs), $(obj-y)))
-LX_OBJS		:= $(sort $(filter     $(export-objs), $(obj-y)))
-M_OBJS		:= $(sort $(filter-out $(export-objs), $(obj-m)))
-MX_OBJS		:= $(sort $(filter     $(export-objs), $(obj-m)))
-
 include $(TOPDIR)/Rules.make
 
 lk201-map.c: lk201-map.map

drivers/video/Makefile

@@ -88,26 +88,10 @@ obj-$(CONFIG_FB_PMAGB_B)          += pmagb-b-fb.o
 obj-$(CONFIG_FB_MAXINE)           += maxinefb.o
 obj-$(CONFIG_FB_TX3912)           += tx3912fb.o
 
-
-subdir-$(CONFIG_FB_MATROX)	  += matrox
-ifeq ($(CONFIG_FB_MATROX),y)
-obj-y				  += matrox/matrox.o
-endif
-
-subdir-$(CONFIG_FB_RIVA)	  += riva
-ifeq ($(CONFIG_FB_RIVA),y)
-obj-y				  += riva/rivafb.o
-endif
-
-subdir-$(CONFIG_FB_SIS)		  += sis
-ifeq ($(CONFIG_FB_SIS),y)
-obj-y				  += sis/sisfb.o
-endif
-
-subdir-$(CONFIG_FB_ATY)		  += aty
-ifeq ($(CONFIG_FB_ATY),y)
-obj-y				  += aty/atyfb.o
-endif
+obj-$(CONFIG_FB_MATROX)		  += matrox/
+obj-$(CONFIG_FB_RIVA)		  += riva/
+obj-$(CONFIG_FB_SIS)		  += sis/
+obj-$(CONFIG_FB_ATY)		  += aty/
 
 obj-$(CONFIG_FB_SUN3)             += sun3fb.o
 obj-$(CONFIG_FB_BWTWO)            += bwtwofb.o

drivers/video/aty/Makefile

 
-O_TARGET := atyfb.o
+O_TARGET := built-in.o
 
 export-objs    :=  atyfb_base.o mach64_accel.o
 
-obj-y				:= atyfb_base.o mach64_accel.o
-obj-$(CONFIG_FB_ATY_GX)		+= mach64_gx.o
-obj-$(CONFIG_FB_ATY_CT)		+= mach64_ct.o mach64_cursor.o
-obj-m				:= $(O_TARGET)
+obj-$(CONFIG_FB_ATY) += atyfb.o
+
+atyfb-y				:= atyfb_base.o mach64_accel.o
+atyfb-$(CONFIG_FB_ATY_GX)	+= mach64_gx.o
+atyfb-$(CONFIG_FB_ATY_CT)	+= mach64_ct.o mach64_cursor.o
+atyfb-objs			:= $(atyfb-y)
 
 include $(TOPDIR)/Rules.make
 

drivers/video/matrox/Makefile

@@ -2,7 +2,7 @@
 # 5 Aug 1999, James Simmons, <mailto:jsimmons@edgeglobal.com>
 # Rewritten to use lists instead of if-statements.
 
-O_TARGET := matrox.o
+O_TARGET := built-in.o
 
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.

drivers/video/riva/Makefile

 #
 # Makefile for the Riva framebuffer driver
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
-O_TARGET := rivafb.o
+O_TARGET := built-in.o
+
+obj-$(CONFIG_FB_RIVA) += rivafb.o
 
-obj-y    := fbdev.o riva_hw.o accel.o
-obj-m    := $(O_TARGET)
+rivafb-objs := fbdev.o riva_hw.o accel.o
 
 include $(TOPDIR)/Rules.make

drivers/video/sis/Makefile

@@ -2,12 +2,13 @@
 # Makefile for the SiS framebuffer device driver
 #
 
-O_TARGET := sisfb.o
+O_TARGET := built-in.o
 
 export-objs := sis_main.o
 
-obj-y  := sis_main.o init.o init301.o
-obj-m  := $(O_TARGET)
+obj-$(CONFIG_FB_SIS) += sisfb.o
+
+sisfb-objs := sis_main.o init.o init301.o
 
 include $(TOPDIR)/Rules.make
 

scripts/mkcompile_h

@@ -3,13 +3,20 @@ ARCH=$2
 SMP=$3
 CC=$4
 
+if [ -r ../.version ]; then
+  VERSION=`cat ../.version`
+else
+  VERSION=0
+  echo 0 > ../.version
+fi
+
 # Generate a temporary compile.h
 
-( echo /\* This file is auto generated, version `cat ../.version` \*/
+( echo /\* This file is auto generated, version $VERSION \*/
 
   echo \#define UTS_MACHINE \"$ARCH\"
 
-  echo -n \#define UTS_VERSION \"\#`cat ../.version`
+  echo -n \#define UTS_VERSION \"\#$VERSION
   if [ -n "$SMP" ] ; then echo -n " SMP"; fi
   echo ' '`date`'"'
 

sound/core/Makefile

@@ -112,6 +112,4 @@ ifeq ($(CONFIG_SND_SB16_CSP),y)
   obj-$(CONFIG_SND_SBAWE) += snd-hwdep.o
 endif
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make

sound/core/seq/Makefile

@@ -81,6 +81,4 @@ obj-$(CONFIG_SND_EMU10K1) += snd-seq-midi.o snd-seq.o snd-seq-device.o snd-seq-m
 obj-$(CONFIG_SND_TRIDENT) += snd-seq-midi.o snd-seq.o snd-seq-device.o snd-seq-midi-event.o snd-seq-midi-emul.o snd-seq-instr.o
 obj-$(CONFIG_SND_YMFPCI) += snd-seq-midi.o snd-seq.o snd-seq-device.o snd-seq-midi-event.o snd-seq-midi-emul.o snd-seq-instr.o
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make

sound/core/seq/instr/Makefile

@@ -43,6 +43,4 @@ obj-$(CONFIG_SND_SONICVIBES) += snd-ainstr-fm.o
 obj-$(CONFIG_SND_TRIDENT) += snd-ainstr-simple.o
 obj-$(CONFIG_SND_YMFPCI) += snd-ainstr-fm.o
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make

sound/drivers/mpu401/Makefile

@@ -42,6 +42,4 @@ obj-$(CONFIG_SND_ALI5451) += snd-mpu401-uart.o
 obj-$(CONFIG_SND_TRIDENT) += snd-mpu401-uart.o
 obj-$(CONFIG_SND_YMFPCI) += snd-mpu401-uart.o
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make

sound/drivers/opl3/Makefile

@@ -65,6 +65,4 @@ ifeq ($(subst m,y,$(CONFIG_SND_SEQUENCER)),y)
   obj-$(CONFIG_SND_YMFPCI) += snd-opl3-synth.o
 endif
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make

sound/isa/ad1848/Makefile

@@ -16,6 +16,4 @@ obj-$(CONFIG_SND_SGALAXY) += snd-ad1848-lib.o
 obj-$(CONFIG_SND_AD1848) += snd-ad1848.o snd-ad1848-lib.o
 obj-$(CONFIG_SND_OPTI92X_AD1848) += snd-ad1848-lib.o
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make

sound/isa/cs423x/Makefile

@@ -25,6 +25,4 @@ obj-$(CONFIG_SND_INTERWAVE_STB) += snd-cs4231-lib.o
 obj-$(CONFIG_SND_OPTI92X_CS4231) += snd-cs4231-lib.o
 obj-$(CONFIG_SND_WAVEFRONT) += snd-cs4231-lib.o
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make

sound/isa/gus/Makefile

@@ -35,6 +35,4 @@ ifeq ($(subst m,y,$(CONFIG_SND_SEQUENCER)),y)
   obj-$(CONFIG_SND_INTERWAVE_STB) += snd-gus-synth.o
 endif
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make

sound/isa/sb/Makefile

@@ -34,6 +34,4 @@ ifeq ($(subst m,y,$(CONFIG_SND_SEQUENCER)),y)
   obj-$(CONFIG_SND_SBAWE) += snd-emu8000-synth.o
 endif
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make

sound/pci/ac97/Makefile

@@ -28,6 +28,4 @@ obj-$(CONFIG_SND_NM256) += snd-ac97-codec.o
 obj-$(CONFIG_SND_TRIDENT) += snd-ac97-codec.o
 obj-$(CONFIG_SND_YMFPCI) += snd-ac97-codec.o
 
-obj-m := $(sort $(obj-m))
-
 include $(TOPDIR)/Rules.make