Skip to content

L
linux
Commit 646cdb32 authored by Alexander Beregalov's avatar Alexander Beregalov Committed by David S. Miller
Browse files
Options

3c50x: convert printk() to pr_<foo>() 

Signed-off-by: default avatarAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d3f65f7c
Show whitespace changes
Inline Side-by-side
Showing with 216 additions and 219 deletions
drivers/net/3c501.c
View file @ 646cdb32
......@@ -281,7 +281,7 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
autoirq = probe_irq_off(irq_mask);
if (autoirq == 0) {
printk(KERN_WARNING "%s probe at %#x failed to detect IRQ line.\n",
pr_warning("%s probe at %#x failed to detect IRQ line.\n",
mname, ioaddr);
release_region(ioaddr, EL1_IO_EXTENT);
return -EAGAIN;
......@@ -297,16 +297,16 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
if (autoirq)
dev->irq = autoirq;
printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
pr_info("%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
dev->name, mname, dev->base_addr,
autoirq ? "auto":"assigned ", dev->irq);
#ifdef CONFIG_IP_MULTICAST
printk(KERN_WARNING "WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
pr_warning("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
#endif
if (el_debug)
printk(KERN_DEBUG "%s", version);
pr_debug("%s", version);
lp = netdev_priv(dev);
memset(lp, 0, sizeof(struct net_local));
......@@ -343,7 +343,7 @@ static int el_open(struct net_device *dev)
unsigned long flags;
if (el_debug > 2)
printk(KERN_DEBUG "%s: Doing el_open()...", dev->name);
pr_debug("%s: Doing el_open()...\n", dev->name);
retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev);
if (retval)
......@@ -374,7 +374,7 @@ static void el_timeout(struct net_device *dev)
int ioaddr = dev->base_addr;
if (el_debug)
printk(KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
pr_debug("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
dev->name, inb(TX_STATUS),
inb(AX_STATUS), inb(RX_STATUS));
dev->stats.tx_errors++;
......@@ -483,14 +483,13 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
lp->loading = 0;
dev->trans_start = jiffies;
if (el_debug > 2)
printk(KERN_DEBUG " queued xmit.\n");
pr_debug(" queued xmit.\n");
dev_kfree_skb(skb);
return 0;
}
/* A receive upset our load, despite our best efforts */
if (el_debug > 2)
printk(KERN_DEBUG "%s: burped during tx load.\n",
dev->name);
pr_debug("%s: burped during tx load.\n", dev->name);
spin_lock_irqsave(&lp->lock, flags);
} while (1);
}
......@@ -540,11 +539,10 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
*/
if (el_debug > 3)
printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x",
dev->name, axsr);
pr_debug("%s: el_interrupt() aux=%#02x\n", dev->name, axsr);
if (lp->loading == 1 && !lp->txing)
printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",
pr_warning("%s: Inconsistent state loading while not in tx\n",
dev->name);
if (lp->txing) {
......@@ -555,19 +553,17 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
int txsr = inb(TX_STATUS);
if (lp->loading == 1) {
if (el_debug > 2) {
printk(KERN_DEBUG "%s: Interrupt while loading [",
dev->name);
printk(" txsr=%02x gp=%04x rp=%04x]\n",
txsr, inw(GP_LOW), inw(RX_LOW));
}
if (el_debug > 2)
pr_debug("%s: Interrupt while loading [txsr=%02x gp=%04x rp=%04x]\n",
dev->name, txsr, inw(GP_LOW), inw(RX_LOW));
/* Force a reload */
lp->loading = 2;
spin_unlock(&lp->lock);
goto out;
}
if (el_debug > 6)
printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x",
pr_debug("%s: txsr=%02x gp=%04x rp=%04x\n", dev->name,
txsr, inw(GP_LOW), inw(RX_LOW));
if ((axsr & 0x80) && (txsr & TX_READY) == 0) {
......@@ -576,7 +572,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
* on trying or reset immediately ?
*/
if (el_debug > 1)
printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
pr_debug("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
dev->name, txsr, axsr,
inw(ioaddr + EL1_DATAPTR),
inw(ioaddr + EL1_RXPTR));
......@@ -587,7 +583,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
* Timed out
*/
if (el_debug)
printk(KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
pr_debug("%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
outb(AX_SYS, AX_CMD);
lp->txing = 0;
dev->stats.tx_aborted_errors++;
......@@ -598,7 +594,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
*/
if (el_debug > 6)
printk(KERN_DEBUG " retransmitting after a collision.\n");
pr_debug("%s: retransmitting after a collision.\n", dev->name);
/*
* Poor little chip can't reset its own start
* pointer
......@@ -616,9 +612,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
*/
dev->stats.tx_packets++;
if (el_debug > 6)
printk(KERN_DEBUG " Tx succeeded %s\n",
(txsr & TX_RDY) ? "." :
"but tx is busy!");
pr_debug("%s: Tx succeeded %s\n", dev->name,
(txsr & TX_RDY) ? "." : "but tx is busy!");
/*
* This is safe the interrupt is atomic WRT itself.
*/
......@@ -633,7 +628,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
int rxsr = inb(RX_STATUS);
if (el_debug > 5)
printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS), inw(RX_LOW));
pr_debug("%s: rxsr=%02x txsr=%02x rp=%04x\n",
dev->name, rxsr, inb(TX_STATUS), inw(RX_LOW));
/*
* Just reading rx_status fixes most errors.
*/
......@@ -643,7 +639,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
/* Handled to avoid board lock-up. */
dev->stats.rx_length_errors++;
if (el_debug > 5)
printk(KERN_DEBUG " runt.\n");
pr_debug("%s: runt.\n", dev->name);
} else if (rxsr & RX_GOOD) {
/*
* Receive worked.
......@@ -654,12 +650,10 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
* Nothing? Something is broken!
*/
if (el_debug > 2)
printk(KERN_DEBUG "%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
pr_debug("%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
dev->name, rxsr);
el_reset(dev);
}
if (el_debug > 3)
printk(KERN_DEBUG ".\n");
}
/*
......@@ -695,11 +689,11 @@ static void el_receive(struct net_device *dev)
pkt_len = inw(RX_LOW);
if (el_debug > 4)
printk(KERN_DEBUG " el_receive %d.\n", pkt_len);
pr_debug(" el_receive %d.\n", pkt_len);
if (pkt_len < 60 || pkt_len > 1536) {
if (el_debug)
printk(KERN_DEBUG "%s: bogus packet, length=%d\n",
pr_debug("%s: bogus packet, length=%d\n",
dev->name, pkt_len);
dev->stats.rx_over_errors++;
return;
......@@ -718,8 +712,7 @@ static void el_receive(struct net_device *dev)
outw(0x00, GP_LOW);
if (skb == NULL) {
printk(KERN_INFO "%s: Memory squeeze, dropping packet.\n",
dev->name);
pr_info("%s: Memory squeeze, dropping packet.\n", dev->name);
dev->stats.rx_dropped++;
return;
} else {
......@@ -753,7 +746,7 @@ static void el_reset(struct net_device *dev)
int ioaddr = dev->base_addr;
if (el_debug > 2)
printk(KERN_INFO "3c501 reset...");
pr_info("3c501 reset...\n");
outb(AX_RESET, AX_CMD); /* Reset the chip */
/* Aux control, irq and loopback enabled */
outb(AX_LOOP, AX_CMD);
......@@ -787,7 +780,7 @@ static int el1_close(struct net_device *dev)
int ioaddr = dev->base_addr;
if (el_debug > 2)
printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n",
pr_info("%s: Shutting down Ethernet card at %#x.\n",
dev->name, ioaddr);
netif_stop_queue(dev);
......
drivers/net/3c503.c
View file @ 646cdb32
......@@ -234,16 +234,16 @@ el2_probe1(struct net_device *dev, int ioaddr)
}
if (ei_debug && version_printed++ == 0)
printk(version);
pr_debug("%s", version);
dev->base_addr = ioaddr;
printk("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
/* Retrieve and print the ethernet address. */
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inb(ioaddr + i);
printk("%pM", dev->dev_addr);
pr_cont("%pM", dev->dev_addr);
/* Map the 8390 back into the window. */
outb(ECNTRL_THIN, ioaddr + 0x406);
......@@ -256,7 +256,8 @@ el2_probe1(struct net_device *dev, int ioaddr)
outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
/* Probe for, turn on and clear the board's shared memory. */
if (ei_debug > 2) printk(" memory jumpers %2.2x ", membase_reg);
if (ei_debug > 2)
pr_cont(" memory jumpers %2.2x ", membase_reg);
outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */
/* This should be probed for (or set via an ioctl()) at run-time.
......@@ -268,7 +269,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
#else
ei_status.interface_num = dev->mem_end & 0xf;
#endif
printk(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
if ((membase_reg & 0xf0) == 0) {
dev->mem_start = 0;
......@@ -292,7 +293,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
writel(test_val, mem_base + i);
if (readl(mem_base) != 0xba5eba5e
|| readl(mem_base + i) != test_val) {
printk("3c503: memory failure or memory address conflict.\n");
pr_warning("3c503: memory failure or memory address conflict.\n");
dev->mem_start = 0;
ei_status.name = "3c503-PIO";
iounmap(mem_base);
......@@ -344,7 +345,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
if (dev->irq == 2)
dev->irq = 9;
else if (dev->irq > 5 && dev->irq != 9) {
printk("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
dev->irq);
dev->irq = 0;
}
......@@ -359,7 +360,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
goto out1;
if (dev->mem_start)
printk("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
dev->name, ei_status.name, (wordlength+1)<<3,
dev->mem_start, dev->mem_end-1);
......@@ -367,7 +368,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
{
ei_status.tx_start_page = EL2_MB1_START_PG;
ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
printk("\n%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
dev->name, ei_status.name, (wordlength+1)<<3);
}
release_region(ioaddr + 0x400, 8);
......@@ -435,15 +436,16 @@ static void
el2_reset_8390(struct net_device *dev)
{
if (ei_debug > 1) {
printk("%s: Resetting the 3c503 board...", dev->name);
printk("%#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
pr_debug("%s: Resetting the 3c503 board...", dev->name);
pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR));
}
outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL);
ei_status.txing = 0;
outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
el2_init_card(dev);
if (ei_debug > 1) printk("done\n");
if (ei_debug > 1)
pr_cont("done\n");
}
/* Initialize the 3c503 GA registers after a reset. */
......@@ -529,7 +531,7 @@ el2_block_output(struct net_device *dev, int count,
{
if(!boguscount--)
{
printk("%s: FIFO blocked in el2_block_output.\n", dev->name);
pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name);
el2_reset_8390(dev);
goto blocked;
}
......@@ -581,7 +583,7 @@ el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_pag
{
if(!boguscount--)
{
printk("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr));
el2_reset_8390(dev);
goto blocked;
......@@ -645,7 +647,7 @@ el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring
{
if(!boguscount--)
{
printk("%s: FIFO blocked in el2_block_input.\n", dev->name);
pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name);
el2_reset_8390(dev);
goto blocked;
}
......@@ -707,7 +709,7 @@ init_module(void)
for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
if (io[this_dev] == 0) {
if (this_dev != 0) break; /* only autoprobe 1st one */
printk(KERN_NOTICE "3c503.c: Presently autoprobing (not recommended) for a single card.\n");
pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n");
}
dev = alloc_eip_netdev();
if (!dev)
......@@ -720,7 +722,7 @@ init_module(void)
continue;
}
free_netdev(dev);
printk(KERN_WARNING "3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
break;
}
if (found)
......
drivers/net/3c505.c
View file @ 646cdb32
......@@ -126,26 +126,25 @@
*
*********************************************************/
static const char filename[] = __FILE__;
#define filename __FILE__
static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n";
#define timeout_msg "*** timeout at %s:%s (line %d) ***\n"
#define TIMEOUT_MSG(lineno) \
printk(timeout_msg, filename,__func__,(lineno))
pr_notice(timeout_msg, filename, __func__, (lineno))
static const char invalid_pcb_msg[] =
"*** invalid pcb length %d at %s:%s (line %d) ***\n";
#define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n"
#define INVALID_PCB_MSG(len) \
printk(invalid_pcb_msg, (len),filename,__func__,__LINE__)
pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__)
static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x...";
#define search_msg "%s: Looking for 3c505 adapter at address %#x..."
static char stilllooking_msg[] __initdata = "still looking...";
#define stilllooking_msg "still looking..."
static char found_msg[] __initdata = "found.\n";
#define found_msg "found.\n"
static char notfound_msg[] __initdata = "not found (reason = %d)\n";
#define notfound_msg "not found (reason = %d)\n"
static char couldnot_msg[] __initdata = KERN_INFO "%s: 3c505 not found\n";
#define couldnot_msg "%s: 3c505 not found\n"
/*********************************************************
*
......@@ -284,7 +283,7 @@ static inline void adapter_reset(struct net_device *dev)
outb_control(orig_hcr, dev);
if (!start_receive(dev, &adapter->tx_pcb))
printk(KERN_ERR "%s: start receive command failed \n", dev->name);
pr_err("%s: start receive command failed\n", dev->name);
}
/* Check to make sure that a DMA transfer hasn't timed out. This should
......@@ -296,7 +295,9 @@ static inline void check_3c505_dma(struct net_device *dev)
elp_device *adapter = netdev_priv(dev);
if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
unsigned long flags, f;
printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
pr_err("%s: DMA %s timed out, %d bytes left\n", dev->name,
adapter->current_dma.direction ? "download" : "upload",
get_dma_residue(dev->dma));
spin_lock_irqsave(&adapter->lock, flags);
adapter->dmaing = 0;
adapter->busy = 0;
......@@ -321,7 +322,7 @@ static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte)
if (inb_status(base_addr) & HCRE)
return false;
}
printk(KERN_WARNING "3c505: send_pcb_slow timed out\n");
pr_warning("3c505: send_pcb_slow timed out\n");
return true;
}
......@@ -333,7 +334,7 @@ static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte)
if (inb_status(base_addr) & HCRE)
return false;
}
printk(KERN_WARNING "3c505: send_pcb_fast timed out\n");
pr_warning("3c505: send_pcb_fast timed out\n");
return true;
}
......@@ -386,7 +387,7 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
/* Avoid contention */
if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) {
if (elp_debug >= 3) {
printk(KERN_DEBUG "%s: send_pcb entered while threaded\n", dev->name);
pr_debug("%s: send_pcb entered while threaded\n", dev->name);
}
return false;
}
......@@ -424,14 +425,15 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
case ASF_PCB_NAK:
#ifdef ELP_DEBUG
printk(KERN_DEBUG "%s: send_pcb got NAK\n", dev->name);
pr_debug("%s: send_pcb got NAK\n", dev->name);
#endif
goto abort;
}
}
if (elp_debug >= 1)
printk(KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
pr_debug("%s: timeout waiting for PCB acknowledge (status %02x)\n",
dev->name, inb_status(dev->base_addr));
goto abort;
sti_abort:
......@@ -481,7 +483,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
if (time_after_eq(jiffies, timeout)) {
TIMEOUT_MSG(__LINE__);
printk(KERN_INFO "%s: status %02x\n", dev->name, stat);
pr_info("%s: status %02x\n", dev->name, stat);
return false;
}
pcb->length = inb_command(dev->base_addr);
......@@ -518,7 +520,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
/* safety check total length vs data length */
if (total_length != (pcb->length + 2)) {
if (elp_debug >= 2)
printk(KERN_WARNING "%s: mangled PCB received\n", dev->name);
pr_warning("%s: mangled PCB received\n", dev->name);
set_hsf(dev, HSF_PCB_NAK);
return false;
}
......@@ -527,7 +529,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
if (test_and_set_bit(0, (void *) &adapter->busy)) {
if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) {
set_hsf(dev, HSF_PCB_NAK);
printk(KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
pr_warning("%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
pcb->command = 0;
return true;
} else {
......@@ -552,7 +554,7 @@ static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb)
elp_device *adapter = netdev_priv(dev);
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: restarting receiver\n", dev->name);
pr_debug("%s: restarting receiver\n", dev->name);
tx_pcb->command = CMD_RECEIVE_PACKET;
tx_pcb->length = sizeof(struct Rcv_pkt);
tx_pcb->data.rcv_pkt.buf_seg
......@@ -586,7 +588,7 @@ static void receive_packet(struct net_device *dev, int len)
skb = dev_alloc_skb(rlen + 2);
if (!skb) {
printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
pr_warning("%s: memory squeeze, dropping packet\n", dev->name);
target = adapter->dma_buffer;
adapter->current_dma.target = NULL;
/* FIXME: stats */
......@@ -604,7 +606,8 @@ static void receive_packet(struct net_device *dev, int len)
/* if this happens, we die */
if (test_and_set_bit(0, (void *) &adapter->dmaing))
printk(KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
pr_err("%s: rx blocked, DMA in progress, dir %d\n",
dev->name, adapter->current_dma.direction);
adapter->current_dma.direction = 0;
adapter->current_dma.length = rlen;
......@@ -623,14 +626,14 @@ static void receive_packet(struct net_device *dev, int len)
release_dma_lock(flags);
if (elp_debug >= 3) {
printk(KERN_DEBUG "%s: rx DMA transfer started\n", dev->name);
pr_debug("%s: rx DMA transfer started\n", dev->name);
}
if (adapter->rx_active)
adapter->rx_active--;
if (!adapter->busy)
printk(KERN_WARNING "%s: receive_packet called, busy not set.\n", dev->name);
pr_warning("%s: receive_packet called, busy not set.\n", dev->name);
}
/******************************************************
......@@ -655,12 +658,13 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
* has a DMA transfer finished?
*/
if (inb_status(dev->base_addr) & DONE) {
if (!adapter->dmaing) {
printk(KERN_WARNING "%s: phantom DMA completed\n", dev->name);
}
if (elp_debug >= 3) {
printk(KERN_DEBUG "%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
}
if (!adapter->dmaing)
pr_warning("%s: phantom DMA completed\n", dev->name);
if (elp_debug >= 3)
pr_debug("%s: %s DMA complete, status %02x\n", dev->name,
adapter->current_dma.direction ? "tx" : "rx",
inb_status(dev->base_addr));
outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
if (adapter->current_dma.direction) {
......@@ -682,7 +686,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
int t = adapter->rx_backlog.length[adapter->rx_backlog.out];
adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out);
if (elp_debug >= 2)
printk(KERN_DEBUG "%s: receiving backlogged packet (%d)\n", dev->name, t);
pr_debug("%s: receiving backlogged packet (%d)\n", dev->name, t);
receive_packet(dev, t);
} else {
adapter->busy = 0;
......@@ -713,21 +717,23 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
len = adapter->irx_pcb.data.rcv_resp.pkt_len;
dlen = adapter->irx_pcb.data.rcv_resp.buf_len;
if (adapter->irx_pcb.data.rcv_resp.timeout != 0) {
printk(KERN_ERR "%s: interrupt - packet not received correctly\n", dev->name);
pr_err("%s: interrupt - packet not received correctly\n", dev->name);
} else {
if (elp_debug >= 3) {
printk(KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
pr_debug("%s: interrupt - packet received of length %i (%i)\n",
dev->name, len, dlen);
}
if (adapter->irx_pcb.command == 0xff) {
if (elp_debug >= 2)
printk(KERN_DEBUG "%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
pr_debug("%s: adding packet to backlog (len = %d)\n",
dev->name, dlen);
adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen;
adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in);
} else {
receive_packet(dev, dlen);
}
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: packet received\n", dev->name);
pr_debug("%s: packet received\n", dev->name);
}
break;
......@@ -737,7 +743,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
case CMD_CONFIGURE_82586_RESPONSE:
adapter->got[CMD_CONFIGURE_82586] = 1;
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: interrupt - configure response received\n", dev->name);
pr_debug("%s: interrupt - configure response received\n", dev->name);
break;
/*
......@@ -746,7 +752,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
case CMD_CONFIGURE_ADAPTER_RESPONSE:
adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1;
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: Adapter memory configuration %s.\n", dev->name,
pr_debug("%s: Adapter memory configuration %s.\n", dev->name,
adapter->irx_pcb.data.failed ? "failed" : "succeeded");
break;
......@@ -756,7 +762,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
case CMD_LOAD_MULTICAST_RESPONSE:
adapter->got[CMD_LOAD_MULTICAST_LIST] = 1;
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: Multicast address list loading %s.\n", dev->name,
pr_debug("%s: Multicast address list loading %s.\n", dev->name,
adapter->irx_pcb.data.failed ? "failed" : "succeeded");
break;
......@@ -766,7 +772,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
case CMD_SET_ADDRESS_RESPONSE:
adapter->got[CMD_SET_STATION_ADDRESS] = 1;
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: Ethernet address setting %s.\n", dev->name,
pr_debug("%s: Ethernet address setting %s.\n", dev->name,
adapter->irx_pcb.data.failed ? "failed" : "succeeded");
break;
......@@ -783,7 +789,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res;
adapter->got[CMD_NETWORK_STATISTICS] = 1;
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: interrupt - statistics response received\n", dev->name);
pr_debug("%s: interrupt - statistics response received\n", dev->name);
break;
/*
......@@ -791,17 +797,17 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
*/
case CMD_TRANSMIT_PACKET_COMPLETE:
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: interrupt - packet sent\n", dev->name);
pr_debug("%s: interrupt - packet sent\n", dev->name);
if (!netif_running(dev))
break;
switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
case 0xffff:
dev->stats.tx_aborted_errors++;
printk(KERN_INFO "%s: transmit timed out, network cable problem?\n", dev->name);
pr_info("%s: transmit timed out, network cable problem?\n", dev->name);
break;
case 0xfffe:
dev->stats.tx_fifo_errors++;
printk(KERN_INFO "%s: transmit timed out, FIFO underrun\n", dev->name);
pr_info("%s: transmit timed out, FIFO underrun\n", dev->name);
break;
}
netif_wake_queue(dev);
......@@ -811,11 +817,12 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
* some unknown PCB
*/
default:
printk(KERN_DEBUG "%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command);
pr_debug("%s: unknown PCB received - %2.2x\n",
dev->name, adapter->irx_pcb.command);
break;
}
} else {
printk(KERN_WARNING "%s: failed to read PCB on interrupt\n", dev->name);
pr_warning("%s: failed to read PCB on interrupt\n", dev->name);
adapter_reset(dev);
}
}
......@@ -844,13 +851,13 @@ static int elp_open(struct net_device *dev)
int retval;
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: request to open device\n", dev->name);
pr_debug("%s: request to open device\n", dev->name);
/*
* make sure we actually found the device
*/
if (adapter == NULL) {
printk(KERN_ERR "%s: Opening a non-existent physical device\n", dev->name);
pr_err("%s: Opening a non-existent physical device\n", dev->name);
return -EAGAIN;
}
/*
......@@ -880,17 +887,17 @@ static int elp_open(struct net_device *dev)
* install our interrupt service routine
*/
if ((retval = request_irq(dev->irq, &elp_interrupt, 0, dev->name, dev))) {
printk(KERN_ERR "%s: could not allocate IRQ%d\n", dev->name, dev->irq);
pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq);
return retval;
}
if ((retval = request_dma(dev->dma, dev->name))) {
free_irq(dev->irq, dev);
printk(KERN_ERR "%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
pr_err("%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
return retval;
}
adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE);
if (!adapter->dma_buffer) {
printk(KERN_ERR "%s: could not allocate DMA buffer\n", dev->name);
pr_err("%s: could not allocate DMA buffer\n", dev->name);
free_dma(dev->dma);
free_irq(dev->irq, dev);
return -ENOMEM;
......@@ -906,7 +913,7 @@ static int elp_open(struct net_device *dev)
* configure adapter memory: we need 10 multicast addresses, default==0
*/
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: sending 3c505 memory configuration command\n", dev->name);
pr_debug("%s: sending 3c505 memory configuration command\n", dev->name);
adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
adapter->tx_pcb.data.memconf.cmd_q = 10;
adapter->tx_pcb.data.memconf.rcv_q = 20;
......@@ -917,7 +924,7 @@ static int elp_open(struct net_device *dev)
adapter->tx_pcb.length = sizeof(struct Memconf);
adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
printk(KERN_ERR "%s: couldn't send memory configuration command\n", dev->name);
pr_err("%s: couldn't send memory configuration command\n", dev->name);
else {
unsigned long timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout));
......@@ -930,13 +937,13 @@ static int elp_open(struct net_device *dev)
* configure adapter to receive broadcast messages and wait for response
*/
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
pr_debug("%s: sending 82586 configure command\n", dev->name);
adapter->tx_pcb.command = CMD_CONFIGURE_82586;
adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
adapter->tx_pcb.length = 2;
adapter->got[CMD_CONFIGURE_82586] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
pr_err("%s: couldn't send 82586 configure command\n", dev->name);
else {
unsigned long timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
......@@ -952,7 +959,7 @@ static int elp_open(struct net_device *dev)
*/
prime_rx(dev);
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
pr_debug("%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
/*
* device is now officially open!
......@@ -982,7 +989,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
if (test_and_set_bit(0, (void *) &adapter->busy)) {
if (elp_debug >= 2)
printk(KERN_DEBUG "%s: transmit blocked\n", dev->name);
pr_debug("%s: transmit blocked\n", dev->name);
return false;
}
......@@ -1004,7 +1011,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
}
/* if this happens, we die */
if (test_and_set_bit(0, (void *) &adapter->dmaing))
printk(KERN_DEBUG "%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
pr_debug("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
adapter->current_dma.direction = 1;
adapter->current_dma.start_time = jiffies;
......@@ -1030,7 +1037,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
release_dma_lock(flags);
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name);
pr_debug("%s: DMA transfer started\n", dev->name);
return true;
}
......@@ -1044,9 +1051,10 @@ static void elp_timeout(struct net_device *dev)
int stat;
stat = inb_status(dev->base_addr);
printk(KERN_WARNING "%s: transmit timed out, lost %s?\n", dev->name, (stat & ACRF) ? "interrupt" : "command");
pr_warning("%s: transmit timed out, lost %s?\n", dev->name,
(stat & ACRF) ? "interrupt" : "command");
if (elp_debug >= 1)
printk(KERN_DEBUG "%s: status %#02x\n", dev->name, stat);
pr_debug("%s: status %#02x\n", dev->name, stat);
dev->trans_start = jiffies;
dev->stats.tx_dropped++;
netif_wake_queue(dev);
......@@ -1068,7 +1076,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
check_3c505_dma(dev);
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len);
pr_debug("%s: request to send packet of length %d\n", dev->name, (int) skb->len);
netif_stop_queue(dev);
......@@ -1077,13 +1085,13 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
*/
if (!send_packet(dev, skb)) {
if (elp_debug >= 2) {
printk(KERN_DEBUG "%s: failed to transmit packet\n", dev->name);
pr_debug("%s: failed to transmit packet\n", dev->name);
}
spin_unlock_irqrestore(&adapter->lock, flags);
return 1;
}
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: packet of length %d sent\n", dev->name, (int) skb->len);
pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len);
/*
* start the transmit timeout
......@@ -1107,7 +1115,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
elp_device *adapter = netdev_priv(dev);
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: request for stats\n", dev->name);
pr_debug("%s: request for stats\n", dev->name);
/* If the device is closed, just return the latest stats we have,
- we cannot ask from the adapter without interrupts */
......@@ -1119,7 +1127,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
adapter->tx_pcb.length = 0;
adapter->got[CMD_NETWORK_STATISTICS] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
printk(KERN_ERR "%s: couldn't send get statistics command\n", dev->name);
pr_err("%s: couldn't send get statistics command\n", dev->name);
else {
unsigned long timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout));
......@@ -1169,7 +1177,7 @@ static int elp_close(struct net_device *dev)
elp_device *adapter = netdev_priv(dev);
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: request to close device\n", dev->name);
pr_debug("%s: request to close device\n", dev->name);
netif_stop_queue(dev);
......@@ -1213,7 +1221,7 @@ static void elp_set_mc_list(struct net_device *dev)
unsigned long flags;
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name);
pr_debug("%s: request to set multicast list\n", dev->name);
spin_lock_irqsave(&adapter->lock, flags);
......@@ -1228,7 +1236,7 @@ static void elp_set_mc_list(struct net_device *dev)
}
adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
printk(KERN_ERR "%s: couldn't send set_multicast command\n", dev->name);
pr_err("%s: couldn't send set_multicast command\n", dev->name);
else {
unsigned long timeout = jiffies + TIMEOUT;
while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout));
......@@ -1247,14 +1255,14 @@ static void elp_set_mc_list(struct net_device *dev)
* and wait for response
*/
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
pr_debug("%s: sending 82586 configure command\n", dev->name);
adapter->tx_pcb.command = CMD_CONFIGURE_82586;
adapter->tx_pcb.length = 2;
adapter->got[CMD_CONFIGURE_82586] = 0;
if (!send_pcb(dev, &adapter->tx_pcb))
{
spin_unlock_irqrestore(&adapter->lock, flags);
printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
pr_err("%s: couldn't send 82586 configure command\n", dev->name);
}
else {
unsigned long timeout = jiffies + TIMEOUT;
......@@ -1283,17 +1291,17 @@ static int __init elp_sense(struct net_device *dev)
orig_HSR = inb_status(addr);
if (elp_debug > 0)
printk(search_msg, name, addr);
pr_debug(search_msg, name, addr);
if (orig_HSR == 0xff) {
if (elp_debug > 0)
printk(notfound_msg, 1);
pr_cont(notfound_msg, 1);
goto out;
}
/* Wait for a while; the adapter may still be booting up */
if (elp_debug > 0)
printk(stilllooking_msg);
pr_cont(stilllooking_msg);
if (orig_HSR & DIR) {
/* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */
......@@ -1301,7 +1309,7 @@ static int __init elp_sense(struct net_device *dev)
msleep(300);
if (inb_status(addr) & DIR) {
if (elp_debug > 0)
printk(notfound_msg, 2);
pr_cont(notfound_msg, 2);
goto out;
}
} else {
......@@ -1310,7 +1318,7 @@ static int __init elp_sense(struct net_device *dev)
msleep(300);
if (!(inb_status(addr) & DIR)) {
if (elp_debug > 0)
printk(notfound_msg, 3);
pr_cont(notfound_msg, 3);
goto out;
}
}
......@@ -1318,7 +1326,7 @@ static int __init elp_sense(struct net_device *dev)
* It certainly looks like a 3c505.
*/
if (elp_debug > 0)
printk(found_msg);
pr_cont(found_msg);
return 0;
out:
......@@ -1349,7 +1357,7 @@ static int __init elp_autodetect(struct net_device *dev)
/* could not find an adapter */
if (elp_debug > 0)
printk(couldnot_msg, dev->name);
pr_debug(couldnot_msg, dev->name);
return 0; /* Because of this, the layer above will return -ENODEV */
}
......@@ -1424,16 +1432,16 @@ static int __init elplus_setup(struct net_device *dev)
/* Nope, it's ignoring the command register. This means that
* either it's still booting up, or it's died.
*/
printk(KERN_ERR "%s: command register wouldn't drain, ", dev->name);
pr_err("%s: command register wouldn't drain, ", dev->name);
if ((inb_status(dev->base_addr) & 7) == 3) {
/* If the adapter status is 3, it *could* still be booting.
* Give it the benefit of the doubt for 10 seconds.
*/
printk("assuming 3c505 still starting\n");
pr_cont("assuming 3c505 still starting\n");
timeout = jiffies + 10*HZ;
while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7));
if (inb_status(dev->base_addr) & 7) {
printk(KERN_ERR "%s: 3c505 failed to start\n", dev->name);
pr_err("%s: 3c505 failed to start\n", dev->name);
} else {
okay = 1; /* It started */
}
......@@ -1441,7 +1449,7 @@ static int __init elplus_setup(struct net_device *dev)
/* Otherwise, it must just be in a strange
* state. We probably need to kick it.
*/
printk("3c505 is sulking\n");
pr_cont("3c505 is sulking\n");
}
}
for (tries = 0; tries < 5 && okay; tries++) {
......@@ -1454,18 +1462,19 @@ static int __init elplus_setup(struct net_device *dev)
adapter->tx_pcb.length = 0;
cookie = probe_irq_on();
if (!send_pcb(dev, &adapter->tx_pcb)) {
printk(KERN_ERR "%s: could not send first PCB\n", dev->name);
pr_err("%s: could not send first PCB\n", dev->name);
probe_irq_off(cookie);
continue;
}
if (!receive_pcb(dev, &adapter->rx_pcb)) {
printk(KERN_ERR "%s: could not read first PCB\n", dev->name);
pr_err("%s: could not read first PCB\n", dev->name);
probe_irq_off(cookie);
continue;
}
if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) ||
(adapter->rx_pcb.length != 6)) {
printk(KERN_ERR "%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
pr_err("%s: first PCB wrong (%d, %d)\n", dev->name,
adapter->rx_pcb.command, adapter->rx_pcb.length);
probe_irq_off(cookie);
continue;
}
......@@ -1474,32 +1483,32 @@ static int __init elplus_setup(struct net_device *dev)
/* It's broken. Do a hard reset to re-initialise the board,
* and try again.
*/
printk(KERN_INFO "%s: resetting adapter\n", dev->name);
pr_info("%s: resetting adapter\n", dev->name);
outb_control(adapter->hcr_val | FLSH | ATTN, dev);
outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev);
}
printk(KERN_ERR "%s: failed to initialise 3c505\n", dev->name);
pr_err("%s: failed to initialise 3c505\n", dev->name);
goto out;
okay:
if (dev->irq) { /* Is there a preset IRQ? */
int rpt = probe_irq_off(cookie);
if (dev->irq != rpt) {
printk(KERN_WARNING "%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
pr_warning("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
}
/* if dev->irq == probe_irq_off(cookie), all is well */
} else /* No preset IRQ; just use what we can detect */
dev->irq = probe_irq_off(cookie);
switch (dev->irq) { /* Legal, sane? */
case 0:
printk(KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n",
pr_err("%s: IRQ probe failed: check 3c505 jumpers.\n",
dev->name);
goto out;
case 1:
case 6:
case 8:
case 13:
printk(KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n",
pr_err("%s: Impossible IRQ %d reported by probe_irq_off().\n",
dev->name, dev->irq);
goto out;
}
......@@ -1521,7 +1530,7 @@ static int __init elplus_setup(struct net_device *dev)
dev->dma = dev->mem_start & 7;
}
else {
printk(KERN_WARNING "%s: warning, DMA channel not specified, using default\n", dev->name);
pr_warning("%s: warning, DMA channel not specified, using default\n", dev->name);
dev->dma = ELP_DMA;
}
}
......@@ -1529,11 +1538,8 @@ static int __init elplus_setup(struct net_device *dev)
/*
* print remainder of startup message
*/
printk(KERN_INFO "%s: 3c505 at %#lx, irq %d, dma %d, "
"addr %pM, ",
dev->name, dev->base_addr, dev->irq, dev->dma,
dev->dev_addr);
pr_info("%s: 3c505 at %#lx, irq %d, dma %d, addr %pM, ",
dev->name, dev->base_addr, dev->irq, dev->dma, dev->dev_addr);
/*
* read more information from the adapter
*/
......@@ -1544,9 +1550,10 @@ static int __init elplus_setup(struct net_device *dev)
!receive_pcb(dev, &adapter->rx_pcb) ||
(adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) ||
(adapter->rx_pcb.length != 10)) {
printk("not responding to second PCB\n");
pr_cont("not responding to second PCB\n");
}
printk("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
pr_cont("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers,
adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
/*
* reconfigure the adapter memory to better suit our purposes
......@@ -1563,10 +1570,10 @@ static int __init elplus_setup(struct net_device *dev)
!receive_pcb(dev, &adapter->rx_pcb) ||
(adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) ||
(adapter->rx_pcb.length != 2)) {
printk(KERN_ERR "%s: could not configure adapter memory\n", dev->name);
pr_err("%s: could not configure adapter memory\n", dev->name);
}
if (adapter->rx_pcb.data.configure) {
printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
pr_err("%s: adapter configuration failed\n", dev->name);
}
dev->netdev_ops = &elp_netdev_ops;
......@@ -1631,17 +1638,17 @@ int __init init_module(void)
dev->dma = dma[this_dev];
} else {
dev->dma = ELP_DMA;
printk(KERN_WARNING "3c505.c: warning, using default DMA channel,\n");
pr_warning("3c505.c: warning, using default DMA channel,\n");
}
if (io[this_dev] == 0) {
if (this_dev) {
free_netdev(dev);
break;
}
printk(KERN_NOTICE "3c505.c: module autoprobe not recommended, give io=xx.\n");
pr_notice("3c505.c: module autoprobe not recommended, give io=xx.\n");
}
if (elplus_setup(dev) != 0) {
printk(KERN_WARNING "3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
pr_warning("3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
free_netdev(dev);
break;
}
......
drivers/net/3c507.c
View file @ 646cdb32
......@@ -364,7 +364,7 @@ static const struct net_device_ops netdev_ops = {
static int __init el16_probe1(struct net_device *dev, int ioaddr)
{
static unsigned char init_ID_done, version_printed;
static unsigned char init_ID_done;
int i, irq, irqval, retval;
struct net_local *lp;
......@@ -391,10 +391,7 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
goto out;
}
if (net_debug && version_printed++ == 0)
printk(version);
printk("%s: 3c507 at %#x,", dev->name, ioaddr);
pr_info("%s: 3c507 at %#x,", dev->name, ioaddr);
/* We should make a few more checks here, like the first three octets of
the S.A. for the manufacturer's code. */
......@@ -403,7 +400,8 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
irqval = request_irq(irq, &el16_interrupt, 0, DRV_NAME, dev);
if (irqval) {
printk(KERN_ERR "3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);
pr_cont("\n");
pr_err("3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);
retval = -EAGAIN;
goto out;
}
......@@ -414,7 +412,7 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
outb(0x01, ioaddr + MISC_CTRL);
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inb(ioaddr + i);
printk(" %pM", dev->dev_addr);
pr_cont(" %pM", dev->dev_addr);
if (mem_start)
net_debug = mem_start & 7;
......@@ -443,18 +441,18 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
dev->if_port = (inb(ioaddr + ROM_CONFIG) & 0x80) ? 1 : 0;
dev->irq = inb(ioaddr + IRQ_CONFIG) & 0x0f;
printk(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,
pr_cont(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,
dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end-1);
if (net_debug)
printk(version);
pr_debug("%s", version);
lp = netdev_priv(dev);
memset(lp, 0, sizeof(*lp));
spin_lock_init(&lp->lock);
lp->base = ioremap(dev->mem_start, RX_BUF_END);
if (!lp->base) {
printk(KERN_ERR "3c507: unable to remap memory\n");
pr_err("3c507: unable to remap memory\n");
retval = -EAGAIN;
goto out1;
}
......@@ -488,20 +486,20 @@ static void el16_tx_timeout (struct net_device *dev)
void __iomem *shmem = lp->base;
if (net_debug > 1)
printk ("%s: transmit timed out, %s? ", dev->name,
pr_debug("%s: transmit timed out, %s? ", dev->name,
readw(shmem + iSCB_STATUS) & 0x8000 ? "IRQ conflict" :
"network cable problem");
/* Try to restart the adaptor. */
if (lp->last_restart == dev->stats.tx_packets) {
if (net_debug > 1)
printk ("Resetting board.\n");
pr_cont("Resetting board.\n");
/* Completely reset the adaptor. */
init_82586_mem (dev);
lp->tx_pkts_in_ring = 0;
} else {
/* Issue the channel attention signal and hope it "gets better". */
if (net_debug > 1)
printk ("Kicking board.\n");
pr_cont("Kicking board.\n");
writew(0xf000 | CUC_START | RX_START, shmem + iSCB_CMD);
outb (0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */
lp->last_restart = dev->stats.tx_packets;
......@@ -553,7 +551,8 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
void __iomem *shmem;
if (dev == NULL) {
printk ("net_interrupt(): irq %d for unknown device.\n", irq);
pr_err("%s: net_interrupt(): irq %d for unknown device.\n",
dev->name, irq);
return IRQ_NONE;
}
......@@ -566,7 +565,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
status = readw(shmem+iSCB_STATUS);
if (net_debug > 4) {
printk("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
pr_debug("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
}
/* Disable the 82586's input to the interrupt line. */
......@@ -577,7 +576,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
unsigned short tx_status = readw(shmem+lp->tx_reap);
if (!(tx_status & 0x8000)) {
if (net_debug > 5)
printk("Tx command incomplete (%#x).\n", lp->tx_reap);
pr_debug("Tx command incomplete (%#x).\n", lp->tx_reap);
break;
}
/* Tx unsuccessful or some interesting status bit set. */
......@@ -591,7 +590,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
}
dev->stats.tx_packets++;
if (net_debug > 5)
printk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
pr_debug("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
lp->tx_reap += TX_BUF_SIZE;
if (lp->tx_reap > RX_BUF_START - TX_BUF_SIZE)
lp->tx_reap = TX_BUF_START;
......@@ -606,7 +605,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
if (status & 0x4000) { /* Packet received. */
if (net_debug > 5)
printk("Received packet, rx_head %04x.\n", lp->rx_head);
pr_debug("Received packet, rx_head %04x.\n", lp->rx_head);
el16_rx(dev);
}
......@@ -615,7 +614,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
if ((status & 0x0700) != 0x0200 && netif_running(dev)) {
if (net_debug)
printk("%s: Command unit stopped, status %04x, restarting.\n",
pr_debug("%s: Command unit stopped, status %04x, restarting.\n",
dev->name, status);
/* If this ever occurs we should really re-write the idle loop, reset
the Tx list, and do a complete restart of the command unit.
......@@ -627,7 +626,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
/* The Rx unit is not ready, it must be hung. Restart the receiver by
initializing the rx buffers, and issuing an Rx start command. */
if (net_debug)
printk("%s: Rx unit stopped, status %04x, restarting.\n",
pr_debug("%s: Rx unit stopped, status %04x, restarting.\n",
dev->name, status);
init_rx_bufs(dev);
writew(RX_BUF_START,shmem+iSCB_RFA);
......@@ -753,9 +752,8 @@ static void init_82586_mem(struct net_device *dev)
int boguscnt = 50;
while (readw(shmem+iSCB_STATUS) == 0)
if (--boguscnt == 0) {
printk("%s: i82586 initialization timed out with status %04x, "
"cmd %04x.\n", dev->name,
readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
pr_warning("%s: i82586 initialization timed out with status %04x, cmd %04x.\n",
dev->name, readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
break;
}
/* Issue channel-attn -- the 82586 won't start. */
......@@ -765,7 +763,7 @@ static void init_82586_mem(struct net_device *dev)
/* Disable loopback and enable interrupts. */
outb(0x84, ioaddr + MISC_CTRL);
if (net_debug > 4)
printk("%s: Initialized 82586, status %04x.\n", dev->name,
pr_debug("%s: Initialized 82586, status %04x.\n", dev->name,
readw(shmem+iSCB_STATUS));
return;
}
......@@ -810,7 +808,7 @@ static void hardware_send_packet(struct net_device *dev, void *buf, short length
lp->tx_head = TX_BUF_START;
if (net_debug > 4) {
printk("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
pr_debug("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
dev->name, ioaddr, length, tx_block, lp->tx_head);
}
......@@ -838,7 +836,7 @@ static void el16_rx(struct net_device *dev)
if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22
|| (pkt_len & 0xC000) != 0xC000) {
printk(KERN_ERR "%s: Rx frame at %#x corrupted, "
pr_err("%s: Rx frame at %#x corrupted, "
"status %04x cmd %04x next %04x "
"data-buf @%04x %04x.\n",
dev->name, rx_head, frame_status, rfd_cmd,
......@@ -858,8 +856,7 @@ static void el16_rx(struct net_device *dev)
pkt_len &= 0x3fff;
skb = dev_alloc_skb(pkt_len+2);
if (skb == NULL) {
printk(KERN_ERR "%s: Memory squeeze, "
"dropping packet.\n",
pr_err("%s: Memory squeeze, dropping packet.\n",
dev->name);
dev->stats.rx_dropped++;
break;
......@@ -926,7 +923,7 @@ MODULE_PARM_DESC(irq, "(ignored)");
int __init init_module(void)
{
if (io == 0)
printk("3c507: You should not use auto-probing with insmod!\n");
pr_notice("3c507: You should not use auto-probing with insmod!\n");
dev_3c507 = el16_probe(-1);
return IS_ERR(dev_3c507) ? PTR_ERR(dev_3c507) : 0;
}
......
drivers/net/3c509.c
View file @ 646cdb32
......@@ -257,7 +257,7 @@ static int el3_isa_id_sequence(__be16 *phys_addr)
&& !memcmp(phys_addr, el3_devs[i]->dev_addr,
ETH_ALEN)) {
if (el3_debug > 3)
printk(KERN_DEBUG "3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
phys_addr[0] & 0xff, phys_addr[0] >> 8,
phys_addr[1] & 0xff, phys_addr[1] >> 8,
phys_addr[2] & 0xff, phys_addr[2] >> 8);
......@@ -574,19 +574,18 @@ static int __devinit el3_common_init(struct net_device *dev)
err = register_netdev(dev);
if (err) {
printk(KERN_ERR "Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",
pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",
dev->base_addr, dev->irq);
release_region(dev->base_addr, EL3_IO_EXTENT);
return err;
}
printk(KERN_INFO "%s: 3c5x9 found at %#3.3lx, %s port, "
"address %pM, IRQ %d.\n",
pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n",
dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)],
dev->dev_addr, dev->irq);
if (el3_debug > 0)
printk(KERN_INFO "%s", version);
pr_info("%s", version);
return 0;
}
......@@ -625,7 +624,7 @@ static int __init el3_mca_probe(struct device *device)
irq = pos5 & 0x0f;
printk(KERN_INFO "3c529: found %s at slot %d\n",
pr_info("3c529: found %s at slot %d\n",
el3_mca_adapter_names[mdev->index], slot + 1);
/* claim the slot */
......@@ -638,7 +637,7 @@ static int __init el3_mca_probe(struct device *device)
irq = mca_device_transform_irq(mdev, irq);
ioaddr = mca_device_transform_ioport(mdev, ioaddr);
if (el3_debug > 2) {
printk(KERN_DEBUG "3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
pr_debug("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
}
EL3WINDOW(0);
for (i = 0; i < 3; i++)
......@@ -761,7 +760,7 @@ static ushort id_read_eeprom(int index)
word = (word << 1) + (inb(id_port) & 0x01);
if (el3_debug > 3)
printk(KERN_DEBUG " 3c509 EEPROM word %d %#4.4x.\n", index, word);
pr_debug(" 3c509 EEPROM word %d %#4.4x.\n", index, word);
return word;
}
......@@ -783,13 +782,13 @@ el3_open(struct net_device *dev)
EL3WINDOW(0);
if (el3_debug > 3)
printk(KERN_DEBUG "%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name,
pr_debug("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name,
dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
el3_up(dev);
if (el3_debug > 3)
printk(KERN_DEBUG "%s: Opened 3c509 IRQ %d status %4.4x.\n",
pr_debug("%s: Opened 3c509 IRQ %d status %4.4x.\n",
dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
return 0;
......@@ -801,8 +800,7 @@ el3_tx_timeout (struct net_device *dev)
int ioaddr = dev->base_addr;
/* Transmitter timeout, serious problems. */
printk(KERN_WARNING "%s: transmit timed out, Tx_status %2.2x status %4.4x "
"Tx FIFO room %d.\n",
pr_warning("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d.\n",
dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
inw(ioaddr + TX_FREE));
dev->stats.tx_errors++;
......@@ -826,7 +824,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
dev->stats.tx_bytes += skb->len;
if (el3_debug > 4) {
printk(KERN_DEBUG "%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
dev->name, skb->len, inw(ioaddr + EL3_STATUS));
}
#if 0
......@@ -835,7 +833,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
ushort status = inw(ioaddr + EL3_STATUS);
if (status & 0x0001 /* IRQ line active, missed one. */
&& inw(ioaddr + EL3_STATUS) & 1) { /* Make sure. */
printk(KERN_DEBUG "%s: Missed interrupt, status then %04x now %04x"
pr_debug("%s: Missed interrupt, status then %04x now %04x"
" Tx %2.2x Rx %4.4x.\n", dev->name, status,
inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),
inw(ioaddr + RX_STATUS));
......@@ -909,7 +907,7 @@ el3_interrupt(int irq, void *dev_id)
if (el3_debug > 4) {
status = inw(ioaddr + EL3_STATUS);
printk(KERN_DEBUG "%s: interrupt, status %4.4x.\n", dev->name, status);
pr_debug("%s: interrupt, status %4.4x.\n", dev->name, status);
}
while ((status = inw(ioaddr + EL3_STATUS)) &
......@@ -920,7 +918,7 @@ el3_interrupt(int irq, void *dev_id)
if (status & TxAvailable) {
if (el3_debug > 5)
printk(KERN_DEBUG " TX room bit was handled.\n");
pr_debug(" TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue (dev);
......@@ -958,7 +956,7 @@ el3_interrupt(int irq, void *dev_id)
}
if (--i < 0) {
printk(KERN_ERR "%s: Infinite loop in interrupt, status %4.4x.\n",
pr_err("%s: Infinite loop in interrupt, status %4.4x.\n",
dev->name, status);
/* Clear all interrupts. */
outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
......@@ -969,7 +967,7 @@ el3_interrupt(int irq, void *dev_id)
}
if (el3_debug > 4) {
printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", dev->name,
pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name,
inw(ioaddr + EL3_STATUS));
}
spin_unlock(&lp->lock);
......@@ -1017,7 +1015,7 @@ static void update_stats(struct net_device *dev)
int ioaddr = dev->base_addr;
if (el3_debug > 5)
printk(" Updating the statistics.\n");
pr_debug(" Updating the statistics.\n");
/* Turn off statistics updates while reading. */
outw(StatsDisable, ioaddr + EL3_CMD);
/* Switch to the stats window, and read everything. */
......@@ -1047,7 +1045,7 @@ el3_rx(struct net_device *dev)
short rx_status;
if (el3_debug > 5)
printk(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) {
if (rx_status & 0x4000) { /* Error, update stats. */
......@@ -1069,7 +1067,7 @@ el3_rx(struct net_device *dev)
skb = dev_alloc_skb(pkt_len+5);
if (el3_debug > 4)
printk("Receiving packet size %d status %4.4x.\n",
pr_debug("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
skb_reserve(skb, 2); /* Align IP on 16 byte */
......@@ -1088,12 +1086,12 @@ el3_rx(struct net_device *dev)
outw(RxDiscard, ioaddr + EL3_CMD);
dev->stats.rx_dropped++;
if (el3_debug)
printk("%s: Couldn't allocate a sk_buff of size %d.\n",
pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n",
dev->name, pkt_len);
}
inw(ioaddr + EL3_STATUS); /* Delay. */
while (inw(ioaddr + EL3_STATUS) & 0x1000)
printk(KERN_DEBUG " Waiting for 3c509 to discard packet, status %x.\n",
pr_debug(" Waiting for 3c509 to discard packet, status %x.\n",
inw(ioaddr + EL3_STATUS) );
}
......@@ -1114,7 +1112,7 @@ set_multicast_list(struct net_device *dev)
static int old;
if (old != dev->mc_count) {
old = dev->mc_count;
printk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
pr_debug("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
}
}
spin_lock_irqsave(&lp->lock, flags);
......@@ -1137,7 +1135,7 @@ el3_close(struct net_device *dev)
struct el3_private *lp = netdev_priv(dev);
if (el3_debug > 2)
printk("%s: Shutting down ethercard.\n", dev->name);
pr_debug("%s: Shutting down ethercard.\n", dev->name);
el3_down(dev);
......@@ -1384,30 +1382,30 @@ el3_up(struct net_device *dev)
EL3WINDOW(4);
net_diag = inw(ioaddr + WN4_NETDIAG);
net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */
printk("%s: ", dev->name);
pr_info("%s: ", dev->name);
switch (dev->if_port & 0x0c) {
case 12:
/* force full-duplex mode if 3c5x9b */
if (sw_info & 0x000f) {
printk("Forcing 3c5x9b full-duplex mode");
pr_cont("Forcing 3c5x9b full-duplex mode");
break;
}
case 8:
/* set full-duplex mode based on eeprom config setting */
if ((sw_info & 0x000f) && (sw_info & 0x8000)) {
printk("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
break;
}
default:
/* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */
printk("Setting 3c5x9/3c5x9B half-duplex mode");
pr_cont("Setting 3c5x9/3c5x9B half-duplex mode");
net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */
}
outw(net_diag, ioaddr + WN4_NETDIAG);
printk(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
if (el3_debug > 3)
printk("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
/* Enable link beat and jabber check. */
outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA);
}
......@@ -1535,7 +1533,7 @@ static int __init el3_init_module(void)
}
if (id_port >= 0x200) {
id_port = 0;
printk(KERN_ERR "No I/O port available for 3c509 activation.\n");
pr_err("No I/O port available for 3c509 activation.\n");
} else {
ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS);
if (!ret)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7