Merge nuts.ninka.net:/home/davem/src/BK/sparcwork-2.5

into nuts.ninka.net:/home/davem/src/BK/sparc-2.5

arch/alpha/Makefile

@@ -12,7 +12,7 @@ NM := $(NM) -B
 
 LDFLAGS_vmlinux = -static -N #-relax
 CFLAGS := $(CFLAGS) -pipe -mno-fp-regs -ffixed-8
-ARCHBLOBLFLAGS := -I binary -O elf64-alpha -B alpha
+LDFLAGS_BLOB := --format binary --oformat elf64-alpha
 
 # Determine if we can use the BWX instructions with GAS.
 old_gas := $(shell if $(AS) --version 2>&1 | grep 'version 2.7' > /dev/null; then echo y; else echo n; fi)

arch/alpha/vmlinux.lds.S

@@ -69,7 +69,7 @@ SECTIONS
 
   .init.ramfs ALIGN(8192): {
 	__initramfs_start = .;
-	*(.init.initramfs)
+	*(.init.ramfs)
 	__initramfs_end = .;
   }
 

arch/i386/Kconfig

@@ -337,7 +337,6 @@ config PREEMPT
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors" if !SMP
-	default y if SMP
 	---help---
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -447,7 +446,7 @@ config X86_MCE
 	  the 386 and 486, so nearly everyone can say Y here.
 
 config X86_MCE_NONFATAL
-	bool "Check for non-fatal errors on Athlon/Duron"
+	bool "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
 	depends on X86_MCE
 	help
 	  Enabling this feature starts a timer that triggers every 5 seconds which
@@ -456,12 +455,12 @@ config X86_MCE_NONFATAL
 	  Disable this if you don't want to see these messages.
 	  Seeing the messages this option prints out may be indicative of dying hardware,
 	  or out-of-spec (ie, overclocked) hardware.
-	  This option only does something on hardware with Intel P6 style MCE.
-	  (Pentium Pro and above, AMD Athlon/Duron)
+	  This option only does something on certain CPUs.
+	  (AMD Athlon/Duron and Intel Pentium 4)
 
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
-	depends on X86_MCE && X86_UP_APIC
+	depends on X86_MCE && (X86_UP_APIC || SMP)
 	help
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.

arch/i386/Makefile

@@ -42,7 +42,7 @@ cflags-$(CONFIG_MCRUSOE)	+= -march=i686 -malign-functions=0 -malign-jumps=0 -mal
 cflags-$(CONFIG_MWINCHIPC6)	+= $(call check_gcc,-march=winchip-c6,-march=i586)
 cflags-$(CONFIG_MWINCHIP2)	+= $(call check_gcc,-march=winchip2,-march=i586)
 cflags-$(CONFIG_MWINCHIP3D)	+= -march=i586
-cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-march=c3,-march=i586)
+cflags-$(CONFIG_MCYRIXIII)	+= $(call check_gcc,-march=c3,-march=i486) -malign-functions=0 -malign-jumps=0 -malign-loops=0
 
 CFLAGS += $(cflags-y)
 

arch/i386/kernel/Makefile

@@ -8,8 +8,7 @@ export-objs     := mca.o i386_ksyms.o time.o
 
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_i386.o \
-		pci-dma.o i386_ksyms.o i387.o bluesmoke.o dmi_scan.o \
-		bootflag.o
+		pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o
 
 obj-y				+= cpu/
 obj-y				+= timers/

arch/i386/kernel/cpu/Makefile

@@ -13,7 +13,10 @@ obj-y	+=	rise.o
 obj-y	+=	nexgen.o
 obj-y	+=	umc.o
 
+obj-$(CONFIG_X86_MCE)	+=	mcheck/
+
 obj-$(CONFIG_MTRR)	+= 	mtrr/
 obj-$(CONFIG_CPU_FREQ)	+=	cpufreq/
 
+
 include $(TOPDIR)/Rules.make

arch/i386/kernel/cpu/common.c

@@ -358,7 +358,9 @@ void __init identify_cpu(struct cpuinfo_x86 *c)
 	       boot_cpu_data.x86_capability[3]);
 
 	/* Init Machine Check Exception if available. */
+#ifdef CONFIG_X86_MCE
 	mcheck_init(c);
+#endif
 }
 /*
  *	Perform early boot up checks for a valid TSC. See arch/i386/kernel/time.c

arch/i386/kernel/cpu/cyrix.c

@@ -5,6 +5,7 @@
 #include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/timer.h>
 
 #include "cpu.h"
 
@@ -170,7 +171,7 @@ static void __init init_cyrix(struct cpuinfo_x86 *c)
 		c->coma_bug = 1;
 		break;
 
-	case 4: /* MediaGX/GXm */
+	case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
 #ifdef CONFIG_PCI
 		/* It isn't really a PCI quirk directly, but the cure is the
 		   same. The MediaGX has deep magic SMM stuff that handles the
@@ -188,29 +189,26 @@ static void __init init_cyrix(struct cpuinfo_x86 *c)
 		isa_dma_bridge_buggy = 2;
 #endif		
 		c->x86_cache_size=16;	/* Yep 16K integrated cache thats it */
+ 
+		/*
+		 *  The 5510/5520 companion chips have a funky PIT.
+		 */  
+		if (pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, NULL) ||
+		    pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, NULL))
+			pit_latch_buggy = 1;
 
 		/* GXm supports extended cpuid levels 'ala' AMD */
 		if (c->cpuid_level == 2) {
-			/* Enable Natsemi MMX extensions */
-			setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+			/* Enable cxMMX extensions (GX1 Datasheet 54) */
+			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
 
 			get_model_name(c);  /* get CPU marketing name */
-			/*
-			 *  The 5510/5520 companion chips have a funky PIT
-			 *  that breaks the TSC synchronizing, so turn it off
-			 */
-			if (pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, NULL) ||
-				pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, NULL))
-				clear_bit(X86_FEATURE_TSC, c->x86_capability);
 			return;
 		}
 		else {  /* MediaGX */
 			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
 			p = Cx86_cb+2;
 			c->x86_model = (dir1 & 0x20) ? 1 : 2;
-#ifndef CONFIG_CS5520
-			clear_bit(X86_FEATURE_TSC, c->x86_capability);
-#endif
 		}
 		break;
 

arch/i386/kernel/cpu/mcheck/Makefile

+obj-y	=	mce.o k7.o p4.o p5.o p6.o winchip.o
+obj-$(CONFIG_X86_MCE_NONFATAL)	+=	non-fatal.o
+
+include $(TOPDIR)/Rules.make
+

arch/i386/kernel/cpu/mcheck/k7.c

+/*
+ * Athlon specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For AMD Athlon/Duron */
+static void k7_machine_check(struct pt_regs * regs, long error_code)
+{
+	int recover=1;
+	u32 alow, ahigh, high, low;
+	u32 mcgstl, mcgsth;
+	int i;
+
+	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	if (mcgstl & (1<<0))	/* Recoverable ? */
+		recover=0;
+
+	printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+		smp_processor_id(), mcgsth, mcgstl);
+
+	for (i=0; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+		if (high&(1<<31)) {
+			if (high & (1<<29))
+				recover |= 1;
+			if (high & (1<<25))
+				recover |= 2;
+			printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+			high &= ~(1<<31);
+			if (high & (1<<27)) {
+				rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+				printk ("[%08x%08x]", ahigh, alow);
+			}
+			if (high & (1<<26)) {
+				rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+				printk (" at %08x%08x", ahigh, alow);
+			}
+			printk ("\n");
+			/* Clear it */
+			wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+			/* Serialize */
+			wmb();
+		}
+	}
+
+	if (recover&2)
+		panic ("CPU context corrupt");
+	if (recover&1)
+		panic ("Unable to continue");
+	printk (KERN_EMERG "Attempting to continue.\n");
+	mcgstl &= ~(1<<2);
+	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+
+/* AMD K7 machine check is Intel like */
+void __init amd_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	int i;
+
+	machine_check_vector = k7_machine_check;
+	wmb();
+
+	printk (KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<8))	/* Control register present ? */
+		wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+	nr_mce_banks = l & 0xff;
+
+	for (i=0; i<nr_mce_banks; i++) {
+		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	}
+
+	set_in_cr4 (X86_CR4_MCE);
+	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+		smp_processor_id());
+
+#ifdef CONFIG_X86_MCE_NONFATAL
+	init_nonfatal_mce_checker();
+#endif
+}

arch/i386/kernel/cpu/mcheck/mce.c

+/*
+ * mce.c - x86 Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/thread_info.h>
+
+#include "mce.h"
+
+int mce_disabled __initdata = 0;
+int nr_mce_banks;
+
+/* Handle unconfigured int18 (should never happen) */
+static void unexpected_machine_check(struct pt_regs * regs, long error_code)
+{	
+	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
+
+asmlinkage void do_machine_check(struct pt_regs * regs, long error_code)
+{
+	machine_check_vector(regs, error_code);
+}
+
+/* This has to be run for each processor */
+void __init mcheck_init(struct cpuinfo_x86 *c)
+{
+	if (mce_disabled==1)
+		return;
+
+	switch (c->x86_vendor) {
+		case X86_VENDOR_AMD:
+			if (c->x86==6 || c->x86==15)
+				amd_mcheck_init(c);
+			break;
+
+		case X86_VENDOR_INTEL:
+			if (c->x86==5)
+				intel_p5_mcheck_init(c);
+			if (c->x86==6)
+				intel_p6_mcheck_init(c);
+			if (c->x86==15)
+				intel_p4_mcheck_init(c);
+			break;
+
+		case X86_VENDOR_CENTAUR:
+			if (c->x86==5)
+				winchip_mcheck_init(c);
+			break;
+
+		default:
+			break;
+	}
+}
+
+static int __init mcheck_disable(char *str)
+{
+	mce_disabled = 1;
+	return 0;
+}
+
+static int __init mcheck_enable(char *str)
+{
+	mce_disabled = -1;
+	return 0;
+}
+
+__setup("nomce", mcheck_disable);
+__setup("mce", mcheck_enable);

arch/i386/kernel/cpu/mcheck/mce.h

+#include <linux/init.h>
+
+void amd_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+void winchip_mcheck_init(struct cpuinfo_x86 *c);
+
+void init_nonfatal_mce_checker(void);
+
+/* Call the installed machine check handler for this CPU setup. */
+extern void (*machine_check_vector)(struct pt_regs *, long error_code);
+
+extern int mce_disabled __initdata;
+extern int nr_mce_banks;
+

arch/i386/kernel/cpu/mcheck/non-fatal.c

+/*
+ * P4 specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+static struct timer_list mce_timer;
+static int timerset;
+
+#define MCE_RATE	15*HZ	/* timer rate is 15s */
+
+static void mce_checkregs (void *info)
+{
+	u32 low, high;
+	int i;
+
+	preempt_disable(); 
+	for (i=0; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high);
+
+		if (high & (1<<31)) {
+			printk (KERN_EMERG "MCE: The hardware reports a non fatal, correctable incident occured on CPU %d.\n",
+				smp_processor_id());
+			printk (KERN_EMERG "Bank %d: %08x%08x\n", i, high, low);
+
+			/* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
+			wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+
+			/* Serialize */
+			wmb();
+		}
+	}
+	preempt_enable();
+}
+
+static void do_mce_timer(void *data)
+{ 
+	mce_checkregs (NULL);
+	smp_call_function (mce_checkregs, NULL, 1, 1);
+} 
+
+static DECLARE_WORK(mce_work, do_mce_timer, NULL);
+
+static void mce_timerfunc (unsigned long data)
+{
+#ifdef CONFIG_SMP
+	if (num_online_cpus() > 1) 
+		schedule_work (&mce_work); 
+#else
+	mce_checkregs (NULL);
+#endif
+	mce_timer.expires = jiffies + MCE_RATE;
+	add_timer (&mce_timer);
+}	
+
+void init_nonfatal_mce_checker()
+{
+	if (timerset == 0) {
+		/* Set the timer to check for non-fatal
+		   errors every MCE_RATE seconds */
+		init_timer (&mce_timer);
+		mce_timer.expires = jiffies + MCE_RATE;
+		mce_timer.data = 0;
+		mce_timer.function = &mce_timerfunc;
+		add_timer (&mce_timer);
+		timerset = 1;
+		printk(KERN_INFO "Machine check exception polling timer started.\n");
+	}
+}

arch/i386/kernel/bluesmoke.c → arch/i386/kernel/cpu/mcheck/p4.c

 /*
- * arch/i386/kernel/bluesmoke.c - x86 Machine Check Exception Reporting
+ * P4 specific Machine Check Exception Reporting
  */
 
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
 #include <linux/config.h>
 #include <linux/irq.h>
-#include <linux/workqueue.h>
 #include <linux/interrupt.h>
+#include <linux/smp.h>
 
 #include <asm/processor.h> 
 #include <asm/system.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/hardirq.h>
 
-#ifdef CONFIG_X86_MCE
+#include "mce.h"
 
 /* as supported by the P4/Xeon family */
 struct intel_mce_extended_msrs {
@@ -37,17 +32,16 @@ struct intel_mce_extended_msrs {
 	/* u32 *reserved[]; */
 };
 
-static int mce_disabled __initdata = 0;
-
 static int mce_num_extended_msrs = 0;
-static int banks;
 
 
 #ifdef CONFIG_X86_MCE_P4THERMAL
-/*
- *	P4/Xeon Thermal transition interrupt handler
- */
+static void unexpected_thermal_interrupt(struct pt_regs *regs)
+{	
+	printk(KERN_ERR "CPU#%d: Unexpected LVT TMR interrupt!\n", smp_processor_id());
+}
 
+/* P4/Xeon Thermal transition interrupt handler */
 static void intel_thermal_interrupt(struct pt_regs *regs)
 {
 	u32 l, h;
@@ -55,7 +49,7 @@ static void intel_thermal_interrupt(struct pt_regs *regs)
 
 	ack_APIC_irq();
 
-	rdmsr(MSR_IA32_THERM_STATUS, l, h);
+	rdmsr (MSR_IA32_THERM_STATUS, l, h);
 	if (l & 1) {
 		printk(KERN_EMERG "CPU#%d: Temperature above threshold\n", cpu);
 		printk(KERN_EMERG "CPU#%d: Running in modulated clock mode\n", cpu);
@@ -64,15 +58,7 @@ static void intel_thermal_interrupt(struct pt_regs *regs)
 	}
 }
 
-static void unexpected_thermal_interrupt(struct pt_regs *regs)
-{	
-	printk(KERN_ERR "CPU#%d: Unexpected LVT TMR interrupt!\n", smp_processor_id());
-}
-
-/*
- *	Thermal interrupt handler for this CPU setup
- */
-
+/* Thermal interrupt handler for this CPU setup */
 static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_thermal_interrupt;
 
 asmlinkage void smp_thermal_interrupt(struct pt_regs regs)
@@ -83,7 +69,6 @@ asmlinkage void smp_thermal_interrupt(struct pt_regs regs)
 }
 
 /* P4/Xeon Thermal regulation detect and init */
-
 static void __init intel_init_thermal(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
@@ -101,7 +86,7 @@ static void __init intel_init_thermal(struct cpuinfo_x86 *c)
 	 * be some SMM goo which handles it, so we can't even put a handler
 	 * since it might be delivered via SMI already -zwanem.
 	 */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	rdmsr (MSR_IA32_MISC_ENABLE, l, h);
 	h = apic_read(APIC_LVTTHMR);
 	if ((l & (1<<3)) && (h & APIC_DM_SMI)) {
 		printk(KERN_DEBUG "CPU#%d: Thermal monitoring handled by SMI\n", cpu);
@@ -120,25 +105,24 @@ static void __init intel_init_thermal(struct cpuinfo_x86 *c)
 	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);	/* we'll mask till we're ready */
 	apic_write_around(APIC_LVTTHMR, h);
 
-	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
+	rdmsr (MSR_IA32_THERM_INTERRUPT, l, h);
+	wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
 
 	/* ok we're good to go... */
 	vendor_thermal_interrupt = intel_thermal_interrupt;
 	
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
+	rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+	wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
 	
-	l = apic_read(APIC_LVTTHMR);
-	apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-	printk(KERN_INFO "CPU#%d: Thermal monitoring enabled\n", cpu);
+	l = apic_read (APIC_LVTTHMR);
+	apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+	printk (KERN_INFO "CPU#%d: Thermal monitoring enabled\n", cpu);
 	return;
 }
 #endif /* CONFIG_X86_MCE_P4THERMAL */
 
 
 /* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
-
 static int inline intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 {
 	u32 h;
@@ -146,16 +130,16 @@ static int inline intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 	if (mce_num_extended_msrs == 0)
 		goto done;
 
-	rdmsr(MSR_IA32_MCG_EAX, r->eax, h);
-	rdmsr(MSR_IA32_MCG_EBX, r->ebx, h);
-	rdmsr(MSR_IA32_MCG_ECX, r->ecx, h);
-	rdmsr(MSR_IA32_MCG_EDX, r->edx, h);
-	rdmsr(MSR_IA32_MCG_ESI, r->esi, h);
-	rdmsr(MSR_IA32_MCG_EDI, r->edi, h);
-	rdmsr(MSR_IA32_MCG_EBP, r->ebp, h);
-	rdmsr(MSR_IA32_MCG_ESP, r->esp, h);
-	rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h);
-	rdmsr(MSR_IA32_MCG_EIP, r->eip, h);
+	rdmsr (MSR_IA32_MCG_EAX, r->eax, h);
+	rdmsr (MSR_IA32_MCG_EBX, r->ebx, h);
+	rdmsr (MSR_IA32_MCG_ECX, r->ecx, h);
+	rdmsr (MSR_IA32_MCG_EDX, r->edx, h);
+	rdmsr (MSR_IA32_MCG_ESI, r->esi, h);
+	rdmsr (MSR_IA32_MCG_EDI, r->edi, h);
+	rdmsr (MSR_IA32_MCG_EBP, r->ebp, h);
+	rdmsr (MSR_IA32_MCG_ESP, r->esp, h);
+	rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h);
+	rdmsr (MSR_IA32_MCG_EIP, r->eip, h);
 
 	/* can we rely on kmalloc to do a dynamic
 	 * allocation for the reserved registers?
@@ -164,10 +148,6 @@ static int inline intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 	return mce_num_extended_msrs;
 }
 
-/*
- *	Machine Check Handler For PII/PIII
- */
-
 static void intel_machine_check(struct pt_regs * regs, long error_code)
 {
 	int recover=1;
@@ -176,329 +156,106 @@ static void intel_machine_check(struct pt_regs * regs, long error_code)
 	int i;
 	struct intel_mce_extended_msrs dbg;
 
-	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-	if(mcgstl&(1<<0))	/* Recoverable ? */
+	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	if (mcgstl & (1<<0))	/* Recoverable ? */
 		recover=0;
 
-	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl);
+	printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+		smp_processor_id(), mcgsth, mcgstl);
 
 	if (intel_get_extended_msrs(&dbg)) {
-		printk(KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n",
+		printk (KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n",
 			smp_processor_id(), dbg.eip, dbg.eflags);
-		printk(KERN_DEBUG "\teax: %08x ebx: %08x ecx: %08x edx: %08x\n",
+		printk (KERN_DEBUG "\teax: %08x ebx: %08x ecx: %08x edx: %08x\n",
 			dbg.eax, dbg.ebx, dbg.ecx, dbg.edx);
-		printk(KERN_DEBUG "\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
+		printk (KERN_DEBUG "\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
 			dbg.esi, dbg.edi, dbg.ebp, dbg.esp);
 	}
 
-	for (i=0;i<banks;i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
-		if(high&(1<<31)) {
-			if(high&(1<<29))
-				recover|=1;
-			if(high&(1<<25))
-				recover|=2;
-			printk(KERN_EMERG "Bank %d: %08x%08x", i, high, low);
-			high&=~(1<<31);
-			if(high&(1<<27)) {
-				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
-				printk("[%08x%08x]", ahigh, alow);
+	for (i=0; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+		if (high & (1<<31)) {
+			if (high & (1<<29))
+				recover |= 1;
+			if (high & (1<<25))
+				recover |= 2;
+			printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+			high &= ~(1<<31);
+			if (high & (1<<27)) {
+				rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+				printk ("[%08x%08x]", ahigh, alow);
 			}
-			if(high&(1<<26)) {
-				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
-				printk(" at %08x%08x", ahigh, alow);
+			if (high & (1<<26)) {
+				rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+				printk (" at %08x%08x", ahigh, alow);
 			}
-			printk("\n");
-			/* Clear it */
-			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-			/* Serialize */
-			wmb();
+			printk ("\n");
 		}
 	}
 
-	if(recover&2)
-		panic("CPU context corrupt");
-	if(recover&1)
-		panic("Unable to continue");
-	printk(KERN_EMERG "Attempting to continue.\n");
-	mcgstl&=~(1<<2);
-	wrmsr(MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
-}
-
-/*
- *	Machine check handler for Pentium class Intel
- */
-
-static void pentium_machine_check(struct pt_regs * regs, long error_code)
-{
-	u32 loaddr, hi, lotype;
-	rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
-	rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
-	printk(KERN_EMERG "CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
-	if(lotype&(1<<5))
-		printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
-}
-
-/*
- *	Machine check handler for WinChip C6
- */
-
-static void winchip_machine_check(struct pt_regs * regs, long error_code)
-{
-	printk(KERN_EMERG "CPU#%d: Machine Check Exception.\n", smp_processor_id());
-}
-
-/*
- *	Handle unconfigured int18 (should never happen)
- */
-
-static void unexpected_machine_check(struct pt_regs * regs, long error_code)
-{	
-	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
-}
-
-/*
- *	Call the installed machine check handler for this CPU setup.
- */
-
-static void (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
-
-asmlinkage void do_machine_check(struct pt_regs * regs, long error_code)
-{
-	machine_check_vector(regs, error_code);
-}
-
-
-#ifdef CONFIG_X86_MCE_NONFATAL
-static struct timer_list mce_timer;
-static int timerset = 0;
-
-#define MCE_RATE	15*HZ	/* timer rate is 15s */
-
-static void mce_checkregs (void *info)
-{
-	u32 low, high;
-	int i;
-
-	preempt_disable(); 
-	for (i=0; i<banks; i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-
-		if ((low | high) != 0) {
-			printk (KERN_EMERG "MCE: The hardware reports a non fatal, correctable incident occured on CPU %d.\n", smp_processor_id());
-			printk (KERN_EMERG "Bank %d: %08x%08x\n", i, high, low);
-
-			/* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
-			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+	if (recover & 2)
+		panic ("CPU context corrupt");
+	if (recover & 1)
+		panic ("Unable to continue");
 
+	printk(KERN_EMERG "Attempting to continue.\n");
+	/* 
+	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+	 * recoverable/continuable.This will allow BIOS to look at the MSRs
+	 * for errors if the OS could not log the error.
+	 */
+	for (i=0; i<nr_mce_banks; i++) {
+		u32 msr;
+		msr = MSR_IA32_MC0_STATUS+i*4;
+		rdmsr (msr, low, high);
+		if (high&(1<<31)) {
+			/* Clear it */
+			wrmsr(msr, 0UL, 0UL);
 			/* Serialize */
 			wmb();
 		}
 	}
-	preempt_enable();
+	mcgstl &= ~(1<<2);
+	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
 }
 
-static void do_mce_timer(void *data)
-{ 
-	smp_call_function (mce_checkregs, NULL, 1, 1);
-} 
 
-static DECLARE_WORK(mce_work, do_mce_timer, NULL);
-
-static void mce_timerfunc (unsigned long data)
-{
-#ifdef CONFIG_SMP
-	if (num_online_cpus() > 1) 
-		schedule_work(&mce_work); 
-#else
-	mce_checkregs(NULL);
-#endif
-	mce_timer.expires = jiffies + MCE_RATE;
-	add_timer (&mce_timer);
-}	
-#endif
-
-
-/*
- *	Set up machine check reporting for processors with Intel style MCE
- */
-
-static void __init intel_mcheck_init(struct cpuinfo_x86 *c)
+void __init intel_p4_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;
-	static int done;
 	
-	/*
-	 *	Check for MCE support
-	 */
-
-	if( !cpu_has(c, X86_FEATURE_MCE) )
-		return;	
-
-	/*
-	 *	Pentium machine check
-	 */
-
-	if(c->x86 == 5)
-	{
-		/* Default P5 to off as its often misconnected */
-		if(mce_disabled != -1)
-			return;
-		machine_check_vector = pentium_machine_check;
-		wmb();
-		/* Read registers before enabling */
-		rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
-		rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
-		if(done==0)
-			printk(KERN_INFO "Intel old style machine check architecture supported.\n");
- 		/* Enable MCE */
-		set_in_cr4(X86_CR4_MCE);
-		printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
-		return;
-	}
-
-
-	/*
-	 *	Check for PPro style MCA
-	 */
- 		
-	if( !cpu_has(c, X86_FEATURE_MCA) )
-		return;
-
-	/* Ok machine check is available */
-
 	machine_check_vector = intel_machine_check;
 	wmb();
 
-	if(done==0)
-		printk(KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr(MSR_IA32_MCG_CAP, l, h);
-	if(l&(1<<8))	/* Control register present ? */
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-	banks = l&0xff;
-
-	/* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
-	if (c->x86_vendor == X86_VENDOR_INTEL && c->x86 == 6) {
-		for(i=1; i<banks; i++)
-			wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-	} else {
-		for(i=0; i<banks; i++)
-			wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+	printk (KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<8))	/* Control register present ? */
+		wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+	nr_mce_banks = l & 0xff;
+
+	for (i=0; i<nr_mce_banks; i++) {
+		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
 	}
 
-	for(i=0; i<banks; i++)
-		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	set_in_cr4 (X86_CR4_MCE);
+	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+		smp_processor_id());
 
-	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+	/* Check for P4/Xeon extended MCE MSRs */
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<9))	{/* MCG_EXT_P */
+		mce_num_extended_msrs = (l >> 16) & 0xff;
+		printk (KERN_INFO "CPU#%d: Intel P4/Xeon Extended MCE MSRs (%d) available\n",
+			smp_processor_id(), mce_num_extended_msrs);
 
-	/*
-	 *	Check for P4/Xeon specific MCE extensions
-	 */
-
-	if (c->x86_vendor == X86_VENDOR_INTEL && c->x86 == 15) {
-		/* Check for P4/Xeon extended MCE MSRs */
-		rdmsr(MSR_IA32_MCG_CAP, l, h);
-		if (l & (1<<9))	{/* MCG_EXT_P */
-			mce_num_extended_msrs = (l >> 16) & 0xff;
-			printk(KERN_INFO "CPU#%d: Intel P4/Xeon Extended MCE MSRs (%d) available\n",
-				smp_processor_id(), mce_num_extended_msrs);
-		}
-		
 #ifdef CONFIG_X86_MCE_P4THERMAL
 		/* Check for P4/Xeon Thermal monitor */
 		intel_init_thermal(c);
 #endif
 	}
-
-	done=1;
-}
-
-/*
- *	Set up machine check reporting on the Winchip C6 series
- */
-
-static void __init winchip_mcheck_init(struct cpuinfo_x86 *c)
-{
-	u32 lo, hi;
-	/* Not supported on C3 */
-	if(c->x86 != 5)
-		return;
-	/* Winchip C6 */
-	machine_check_vector = winchip_machine_check;
-	wmb();
-	rdmsr(MSR_IDT_FCR1, lo, hi);
-	lo|= (1<<2);	/* Enable EIERRINT (int 18 MCE) */
-	lo&= ~(1<<4);	/* Enable MCE */
-	wrmsr(MSR_IDT_FCR1, lo, hi);
-	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Winchip machine check reporting enabled on CPU#%d.\n", smp_processor_id());
-}
-
-
-/*
- *	This has to be run for each processor
- */
-
-void __init mcheck_init(struct cpuinfo_x86 *c)
-{
-
-	if(mce_disabled==1)
-		return;
-
-	switch(c->x86_vendor)
-	{
-		case X86_VENDOR_AMD:
-			/* AMD K7 machine check is Intel like */
-			if(c->x86 == 6 || c->x86 == 15) {
-				intel_mcheck_init(c);
 #ifdef CONFIG_X86_MCE_NONFATAL
-				if (timerset == 0) {
-					/* Set the timer to check for non-fatal
-					   errors every MCE_RATE seconds */
-					init_timer (&mce_timer);
-					mce_timer.expires = jiffies + MCE_RATE;
-					mce_timer.data = 0;
-					mce_timer.function = &mce_timerfunc;
-					add_timer (&mce_timer);
-					timerset = 1;
-					printk(KERN_INFO "Machine check exception polling timer started.\n");
-				}
+	init_nonfatal_mce_checker();
 #endif
-			}
-			break;
-
-		case X86_VENDOR_INTEL:
-			intel_mcheck_init(c);
-			break;
-
-		case X86_VENDOR_CENTAUR:
-			winchip_mcheck_init(c);
-			break;
-
-		default:
-			break;
-	}
 }
-
-static int __init mcheck_disable(char *str)
-{
-	mce_disabled = 1;
-	return 0;
-}
-
-static int __init mcheck_enable(char *str)
-{
-	mce_disabled = -1;
-	return 0;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce", mcheck_enable);
-
-#else
-asmlinkage void do_machine_check(struct pt_regs * regs, long error_code) {}
-asmlinkage void smp_thermal_interrupt(struct pt_regs regs) {}
-void __init mcheck_init(struct cpuinfo_x86 *c) {}
-#endif

arch/i386/kernel/cpu/mcheck/p5.c

+/*
+ * P5 specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for Pentium class Intel */
+static void pentium_machine_check(struct pt_regs * regs, long error_code)
+{
+	u32 loaddr, hi, lotype;
+	rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
+	rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
+	printk(KERN_EMERG "CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
+	if(lotype&(1<<5))
+		printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p5_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	
+	/*Check for MCE support */
+	if( !cpu_has(c, X86_FEATURE_MCE) )
+		return;	
+
+	/* Default P5 to off as its often misconnected */
+	if(mce_disabled != -1)
+		return;
+	machine_check_vector = pentium_machine_check;
+	wmb();
+
+	/* Read registers before enabling */
+	rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
+	rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
+	printk(KERN_INFO "Intel old style machine check architecture supported.\n");
+
+ 	/* Enable MCE */
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+}

arch/i386/kernel/cpu/mcheck/p6.c

+/*
+ * P6 specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For PII/PIII */
+static void intel_machine_check(struct pt_regs * regs, long error_code)
+{
+	int recover=1;
+	u32 alow, ahigh, high, low;
+	u32 mcgstl, mcgsth;
+	int i;
+
+	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	if (mcgstl & (1<<0))	/* Recoverable ? */
+		recover=0;
+
+	printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+		smp_processor_id(), mcgsth, mcgstl);
+
+	for (i=0; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+		if (high & (1<<31)) {
+			if (high & (1<<29))
+				recover |= 1;
+			if (high & (1<<25))
+				recover |= 2;
+			printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+			high &= ~(1<<31);
+			if (high & (1<<27)) {
+				rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+				printk ("[%08x%08x]", ahigh, alow);
+			}
+			if (high & (1<<26)) {
+				rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+				printk (" at %08x%08x", ahigh, alow);
+			}
+			printk ("\n");
+		}
+	}
+
+	if (recover & 2)
+		panic ("CPU context corrupt");
+	if (recover & 1)
+		panic ("Unable to continue");
+
+	printk (KERN_EMERG "Attempting to continue.\n");
+	/* 
+	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+	 * recoverable/continuable.This will allow BIOS to look at the MSRs
+	 * for errors if the OS could not log the error.
+	 */
+	for (i=0; i<nr_mce_banks; i++) {
+		unsigned int msr;
+		msr = MSR_IA32_MC0_STATUS+i*4;
+		rdmsr (msr,low, high);
+		if (high & (1<<31)) {
+			/* Clear it */
+			wrmsr (msr, 0UL, 0UL);
+			/* Serialize */
+			wmb();
+		}
+	}
+	mcgstl &= ~(1<<2);
+	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p6_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	int i;
+	
+	/* Check for MCE support */
+	if (!cpu_has(c, X86_FEATURE_MCE))
+		return;
+
+	/* Check for PPro style MCA */
+ 	if (!cpu_has(c, X86_FEATURE_MCA))
+		return;
+
+	/* Ok machine check is available */
+	machine_check_vector = intel_machine_check;
+	wmb();
+
+	printk (KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<8))	/* Control register present ? */
+		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+	nr_mce_banks = l & 0xff;
+
+	/* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
+	for (i=1; i<nr_mce_banks; i++) {
+		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	}
+
+	set_in_cr4 (X86_CR4_MCE);
+	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+		smp_processor_id());
+}

arch/i386/kernel/cpu/mcheck/winchip.c

+/*
+ * IDT Winchip specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for WinChip C6 */
+static void winchip_machine_check(struct pt_regs * regs, long error_code)
+{
+	printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
+}
+
+/* Set up machine check reporting on the Winchip C6 series */
+void __init winchip_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 lo, hi;
+	machine_check_vector = winchip_machine_check;
+	wmb();
+	rdmsr(MSR_IDT_FCR1, lo, hi);
+	lo|= (1<<2);	/* Enable EIERRINT (int 18 MCE) */
+	lo&= ~(1<<4);	/* Enable MCE */
+	wrmsr(MSR_IDT_FCR1, lo, hi);
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
+}

arch/i386/kernel/entry.S

@@ -471,10 +471,12 @@ ENTRY(page_fault)
 	pushl $do_page_fault
 	jmp error_code
 
+#ifdef CONFIG_X86_MCE
 ENTRY(machine_check)
 	pushl $0
 	pushl $do_machine_check
 	jmp error_code
+#endif
 
 ENTRY(spurious_interrupt_bug)
 	pushl $0

arch/i386/kernel/time.c

@@ -61,6 +61,7 @@
 #include <asm/arch_hooks.h>
 
 extern spinlock_t i8259A_lock;
+int pit_latch_buggy;              /* extern */
 
 #include "do_timer.h"
 

arch/i386/kernel/timers/timer_tsc.c

@@ -60,6 +60,8 @@ static unsigned long get_offset_tsc(void)
 static void mark_offset_tsc(void)
 {
 	int count;
+	int countmp;
+	static int count1=0, count2=LATCH;
 	/*
 	 * It is important that these two operations happen almost at
 	 * the same time. We do the RDTSC stuff first, since it's
@@ -83,6 +85,20 @@ static void mark_offset_tsc(void)
 	count |= inb(0x40) << 8;
 	spin_unlock(&i8253_lock);
 
+	if (pit_latch_buggy) {
+		/* get center value of last 3 time lutch */
+		if ((count2 >= count && count >= count1)
+		    || (count1 >= count && count >= count2)) {
+			count2 = count1; count1 = count;
+		} else if ((count1 >= count2 && count2 >= count)
+			   || (count >= count2 && count2 >= count1)) {
+			countmp = count;count = count2;
+			count2 = count1;count1 = countmp;
+		} else {
+			count2 = count1; count1 = count; count = count1;
+		}
+	}
+
 	count = ((LATCH-1) - count) * TICK_SIZE;
 	delay_at_last_interrupt = (count + LATCH/2) / LATCH;
 }
@@ -111,10 +127,12 @@ static unsigned long __init calibrate_tsc(void)
 	 * Set the Gate high, program CTC channel 2 for mode 0,
 	 * (interrupt on terminal count mode), binary count,
 	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+	 *
+	 * Some devices need a delay here.
 	 */
 	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
-	outb(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
-	outb(CALIBRATE_LATCH >> 8, 0x42);	/* MSB of count */
+	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
 
 	{
 		unsigned long startlow, starthigh;
@@ -238,8 +256,6 @@ static int init_tsc(void)
  	 *	moaned if you have the only one in the world - you fix it!
  	 */
  
- 	dodgy_tsc();
- 	
 	if (cpu_has_tsc) {
 		unsigned long tsc_quotient = calibrate_tsc();
 		if (tsc_quotient) {

arch/i386/kernel/traps.c

@@ -906,7 +906,9 @@ void __init trap_init(void)
 	set_trap_gate(15,&spurious_interrupt_bug);
 	set_trap_gate(16,&coprocessor_error);
 	set_trap_gate(17,&alignment_check);
+#ifdef CONFIG_X86_MCE
 	set_trap_gate(18,&machine_check);
+#endif
 	set_trap_gate(19,&simd_coprocessor_error);
 
 	set_system_gate(SYSCALL_VECTOR,&system_call);

drivers/ieee1394/sbp2.c

@@ -3139,12 +3139,12 @@ static int sbp2scsi_reset (Scsi_Cmnd *SCpnt)
  */
 #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,44)
 static int sbp2scsi_biosparam (struct scsi_device *sdev,
-		struct block_device *dev, sector_t capacy, int geom[]) 
+		struct block_device *dev, sector_t capacity, int geom[]) 
 {
 #else
 static int sbp2scsi_biosparam (Scsi_Disk *disk, kdev_t dev, int geom[]) 
 {
-	sector_t capacy = disk->capacity;
+	sector_t capacity = disk->capacity;
 #endif
 	int heads, sectors, cylinders;
 

drivers/ieee1394/sbp2.h

@@ -549,10 +549,10 @@ static int sbp2_max_speed_and_size(struct sbp2scsi_host_info *hi, struct scsi_id
 static int sbp2scsi_detect (Scsi_Host_Template *tpnt);
 static const char *sbp2scsi_info (struct Scsi_Host *host);
 void sbp2scsi_setup(char *str, int *ints);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28)
-static int sbp2scsi_biosparam (Scsi_Disk *disk, kdev_t dev, int geom[]);
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,44)
+static int sbp2scsi_biosparam (struct scsi_device *sdev, struct block_device *dev, sector_t capacity, int geom[]);
 #else
-static int sbp2scsi_biosparam (Scsi_Disk *disk, struct block_device *dev, int geom[]);
+static int sbp2scsi_biosparam (Scsi_Disk *disk, kdev_t dev, int geom[]);
 #endif
 static int sbp2scsi_abort (Scsi_Cmnd *SCpnt); 
 static int sbp2scsi_reset (Scsi_Cmnd *SCpnt); 

drivers/scsi/NCR5380.c

@@ -345,6 +345,51 @@ static __inline__ void initialize_SCp(Scsi_Cmnd * cmd)
 	}
 }
 
+/**
+ *	NCR5380_poll_politely	-	wait for NCR5380 status bits
+ *	@instance: controller to poll
+ *	@reg: 5380 register to poll
+ *	@bit: Bitmask to check
+ *	@val: Value required to exit
+ *
+ *	Polls the NCR5380 in a reasonably efficient manner waiting for
+ *	an event to occur, after a short quick poll we begin giving the
+ *	CPU back in non IRQ contexts
+ *
+ *	Returns the value of the register or a negative error code.
+ */
+ 
+static int NCR5380_poll_politely(struct Scsi_Host *instance, int reg, int bit, int val, int t)
+{
+	NCR5380_local_declare();
+	int n = 500;		/* At about 8uS a cycle for the cpu access */
+	unsigned long end = jiffies + t;
+	int r;
+	
+	NCR5380_setup(instance);
+
+	while( n-- > 0)
+	{
+		r = NCR5380_read(reg);
+		if((r & bit) == val)
+			return r;
+		cpu_relax();
+	}
+	
+	/* t time yet ? */
+	while(time_before(jiffies, end))
+	{
+		r = NCR5380_read(reg);
+		if((r & bit) == val)
+			return r; 
+		if(!in_interrupt())
+			yield();
+		else
+			cpu_relax();
+	}
+	return -ETIMEDOUT;
+}
+
 static struct {
 	unsigned char value;
 	const char *name;
@@ -679,8 +724,11 @@ static int __init NCR5380_probe_irq(struct Scsi_Host *instance, int possible)
 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
 
 	while (probe_irq == IRQ_NONE && time_before(jiffies, timeout))
-		barrier();
-
+	{
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+	}
+	
 	NCR5380_write(SELECT_ENABLE_REG, 0);
 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 
@@ -1026,11 +1074,7 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
 		case 5:
 			printk(KERN_INFO "scsi%d: SCSI bus busy, waiting up to five seconds\n", instance->host_no);
 			timeout = jiffies + 5 * HZ;
-			while (time_before(jiffies, timeout) && (NCR5380_read(STATUS_REG) & SR_BSY))
-			{
-				set_current_state(TASK_UNINTERRUPTIBLE);
-				schedule_timeout(1);
-			}
+			NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, 0, 5*HZ);
 			break;
 		case 2:
 			printk(KERN_WARNING "scsi%d: bus busy, attempting abort\n", instance->host_no);
@@ -1057,8 +1101,7 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
  *      twiddling done to the host specific fields of cmd.  If the 
  *      main coroutine is not running, it is restarted.
  *
- *	Locks: host lock taken by caller. Called functions drop and
- *	retake this lock. Called functions take dma lock.
+ *	Locks: host lock taken by caller
  */
 
 static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) 
@@ -1164,7 +1207,8 @@ static void NCR5380_main(void *p)
 
 	instance = hostdata->host;
 
-	spin_lock_irqsave(instance->host_lock, flags);
+	if(instance->irq != IRQ_NONE)
+		spin_lock_irqsave(instance->host_lock, flags);
 
 	do {
 		/* Lock held here */
@@ -1243,12 +1287,9 @@ static void NCR5380_main(void *p)
 				   do not respond to commands immediately
 				   after a scan */
 				printk(KERN_DEBUG "scsi%d: device %d did not respond in time\n", instance->host_no, tmp->target);
-				//spin_lock_irq(&io_request_lock);
 				LIST(tmp, hostdata->issue_queue);
 				tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
 				hostdata->issue_queue = tmp;
-				//spin_unlock_irq(&io_request_lock);
-
 				hostdata->time_expires = jiffies + USLEEP_WAITLONG;
 				NCR5380_set_timer(instance);
 			}
@@ -1267,7 +1308,8 @@ static void NCR5380_main(void *p)
 			break;
 	} while (!done);
 	
-	spin_unlock_irqrestore(instance->host_lock, flags);
+	if(instance->irq != IRQ_NONE)
+		spin_unlock_irqrestore(instance->host_lock, flags);
 }
 
 #ifndef DONT_USE_INTR
@@ -1341,24 +1383,9 @@ static void NCR5380_intr(int irq, void *dev_id, struct pt_regs *regs)
 							hostdata->dmalen = 0;
 
 							(void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-#if NCR_TIMEOUT
-							{
-								unsigned long timeout = jiffies + NCR_TIMEOUT;
-
-								spin_unlock_irq(instance->host_lock);
-								/* FIXME: prove timer is always running here! */
-								while (NCR5380_read(BUS_AND_STATUS_REG) & BASR_ACK && time_before(jiffies, timeout))
-									cpu_relax();
-								spin_lock_irq(instance->host_lock);
-
-								if (time_after_eq(jiffies, timeout))
-									printk("scsi%d: timeout at NCR5380.c:%d\n", host->host_no, __LINE__);
-							}
 							
-#else /* NCR_TIMEOUT */
-							while (NCR5380_read(BUS_AND_STATUS_REG) & BASR_ACK)
-								cpu_relax();
-#endif
+							/* FIXME: we need to poll briefly then defer a workqueue task ! */
+							NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2*HZ);
 
 							NCR5380_write(MODE_REG, MR_BASE);
 							NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -1438,7 +1465,7 @@ static void collect_stats(struct NCR5380_hostdata *hostdata, Scsi_Cmnd * cmd)
  *      If failed (no target) : cmd->scsi_done() will be called, and the 
  *              cmd->result host byte set to DID_BAD_TARGET.
  *
- *	Locks: caller holds hostdata lock
+ *	Locks: caller holds hostdata lock in IRQ mode
  */
  
 static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag) 
@@ -1451,8 +1478,11 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
 	unsigned long timeout;
 	unsigned char value;
 	NCR5380_setup(instance);
+	int err;
 
 	if (hostdata->selecting) {
+		if(instance->irq != IRQ_NONE)
+			spin_unlock_irq(instance->host_lock);
 		goto part2;	/* RvC: sorry prof. Dijkstra, but it keeps the
 				   rest of the code nearly the same */
 	}
@@ -1476,29 +1506,22 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
 	NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
 	NCR5380_write(MODE_REG, MR_ARBITRATE);
 
-	/* Wait for arbitration logic to complete */
-#if NCR_TIMEOUT
-	{
-		unsigned long timeout = jiffies + 2 * NCR_TIMEOUT;
-
+	if(instance->irq != IRQ_NONE)
 		spin_unlock_irq(instance->host_lock);
 
-		while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
-		       && time_before(jiffies, timeout))
-		       	cpu_relax();
+	/* We can be relaxed here, interrupts are on, we are
+	   in workqueue context, the birds are singing in the trees */
 
+	err = NCR5380_poll_politely(instance, INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS, ICR_ARBITRATION_PROGRESS, 5*HZ);
+	if(instance->irq != IRQ_NONE)
 		spin_lock_irq(instance->host_lock);
 
-		if (time_after_eq(jiffies, timeout)) {
-			printk("scsi: arbitration timeout at %d\n", __LINE__);
-			NCR5380_write(MODE_REG, MR_BASE);
-			NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-			return -1;
-		}
+	if (err < 0) {
+		printk(KERN_DEBUG "scsi: arbitration timeout at %d\n", __LINE__);
+		NCR5380_write(MODE_REG, MR_BASE);
+		NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+		goto failed;
 	}
-#else				/* NCR_TIMEOUT */
-	while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS));
-#endif
 
 	dprintk(NDEBUG_ARBITRATION, ("scsi%d : arbitration complete\n", instance->host_no));
 
@@ -1515,7 +1538,7 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
 	if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
 		NCR5380_write(MODE_REG, MR_BASE);
 		dprintk(NDEBUG_ARBITRATION, ("scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no));
-		return -1;
+		goto failed;
 	}
 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL);
 
@@ -1528,7 +1551,7 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
 		NCR5380_write(MODE_REG, MR_BASE);
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 		dprintk(NDEBUG_ARBITRATION, ("scsi%d : lost arbitration, deasserting ICR_ASSERT_SEL\n", instance->host_no));
-		return -1;
+		goto failed;
 	}
 	/* 
 	 * Again, bus clear + bus settle time is 1.2us, however, this is 
@@ -1613,8 +1636,7 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
 	   we poll only once ech clock tick */
 	value = NCR5380_read(STATUS_REG) & (SR_BSY | SR_IO);
 
-	/* FIXME HZ=100 assumption ? */
-	if (!value && (hostdata->select_time < 25)) {
+	if (!value && (hostdata->select_time < HZ/4)) {
 		/* RvC: we still must wait for a device response */
 		hostdata->select_time++;	/* after 25 ticks the device has failed */
 		hostdata->time_expires = jiffies + 1;
@@ -1627,6 +1649,8 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
 					   waiting period */
 	if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+		if(instance->irq != IRQ_NONE)
+			spin_lock_irq(instance->host_lock);
 		NCR5380_reselect(instance);
 		printk("scsi%d : reselection after won arbitration?\n", instance->host_no);
 		NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
@@ -1645,13 +1669,15 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
 	if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 		if (hostdata->targets_present & (1 << cmd->target)) {
-			printk("scsi%d : weirdness\n", instance->host_no);
+			printk(KERN_DEBUG "scsi%d : weirdness\n", instance->host_no);
 			if (hostdata->restart_select)
-				printk("\trestart select\n");
+				printk(KERN_DEBUG "\trestart select\n");
 			NCR5380_dprint(NDEBUG_SELECTION, instance);
 			NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
 			return -1;
 		}
+		if(instance->irq != IRQ_NONE)
+			spin_lock_irq(instance->host_lock);
 		cmd->result = DID_BAD_TARGET << 16;
 		collect_stats(hostdata, cmd);
 		cmd->scsi_done(cmd);
@@ -1678,29 +1704,21 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
 	 */
 
 	/* Wait for start of REQ/ACK handshake */
-#ifdef NCR_TIMEOUT
-	{
-		unsigned long timeout = jiffies + NCR_TIMEOUT;
-
-		spin_unlock_irq(instance->host_lock);
-		while (!(NCR5380_read(STATUS_REG) & SR_REQ) && time_before(jiffies, timeout))
-			cpu_relax();
-		spin_lock_irq(instance->host_lock);
-
-		if (time_after_eq(jiffies, timeout)) {
-			printk("scsi%d: timeout at NCR5380.c:%d\n", instance->host_no, __LINE__);
-			NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-			return -1;
-		}
+	
+	err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+	
+	if(err)
+	{	printk(KERN_ERR "scsi%d: timeout at NCR5380.c:%d\n", instance->host_no, __LINE__);
+		NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+		goto failed;
 	}
-#else				/* NCR_TIMEOUT */
-	while (!(NCR5380_read(STATUS_REG) & SR_REQ))
-		cpu_relax();
-#endif				/* def NCR_TIMEOUT */
 
 	dprintk(NDEBUG_SELECTION, ("scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->target));
 	tmp[0] = IDENTIFY(((instance->irq == IRQ_NONE) ? 0 : 1), cmd->lun);
 
+	if(instance->irq != IRQ_NONE)
+		spin_lock_irq(instance->host_lock);
+		
 	len = 1;
 	cmd->tag = 0;
 
@@ -1717,6 +1735,13 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
 
 
 	return 0;
+
+	/* Selection failed */
+failed:
+	if(instance->irq != IRQ_NONE)
+		spin_lock_irq(instance->host_lock);
+	return -1;
+
 }
 
 /* 
@@ -1786,6 +1811,7 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase
 		 *      if breaking is not allowed, we keep polling as long as needed
 		 */
 
+		/* FIXME */
 		while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ) && !break_allowed);
 		if (!(tmp & SR_REQ)) {
 			/* timeout condition */
@@ -1832,8 +1858,8 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase
 			NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
 		}
 
-		while (NCR5380_read(STATUS_REG) & SR_REQ);
-
+		/* FIXME - if this fails bus reset ?? */
+		NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 5*HZ);
 		dprintk(NDEBUG_HANDSHAKE, ("scsi%d : req false, handshake complete\n", instance->host_no));
 
 /*
@@ -1905,8 +1931,9 @@ static void do_reset(struct Scsi_Host *host) {
 
 static int do_abort(struct Scsi_Host *host) {
 	NCR5380_local_declare();
-	unsigned char tmp, *msgptr, phase;
+	unsigned char *msgptr, phase, tmp;
 	int len;
+	int rc;
 	NCR5380_setup(host);
 
 
@@ -1923,15 +1950,21 @@ static int do_abort(struct Scsi_Host *host) {
 	 * the target sees, so we just handshake.
 	 */
 
-	while (!(tmp = NCR5380_read(STATUS_REG)) & SR_REQ)
-		cpu_relax();
+	rc = NCR5380_poll_politely(host, STATUS_REG, SR_REQ, SR_REQ, 60 * HZ);
+	
+	if(rc < 0)
+		return -1;
 
+	tmp = (unsigned char)rc;
+	
 	NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
 
 	if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
-		while (NCR5380_read(STATUS_REG) & SR_REQ);
+		rc = NCR5380_poll_politely(host, STATUS_REG, SR_REQ, 0, 3*HZ);
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
+		if(rc == -1)
+			return -1;
 	}
 	tmp = ABORT;
 	msgptr = &tmp;
@@ -2245,7 +2278,7 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
  * XXX Note : we need to watch for bus free or a reset condition here 
  *      to recover from an unexpected bus free condition.
  *
- * Locks: io_request_lock held by caller
+ * Locks: io_request_lock held by caller in IRQ mode
  */
 
 static void NCR5380_information_transfer(struct Scsi_Host *instance) {
@@ -2503,7 +2536,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
 
 						/* Enable reselect interrupts */
 						NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-						/* Wait for bus free to avoid nasty timeouts */
+						/* Wait for bus free to avoid nasty timeouts - FIXME timeout !*/
+						/* NCR538_poll_politely(instance, STATUS_REG, SR_BSY, 0, 30 * HZ); */
 						while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
 							barrier();
 						return;
@@ -2658,7 +2692,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
  *      
  * Inputs : instance - this instance of the NCR5380.
  *
- * Locks: io_request_lock held by caller
+ * Locks: io_request_lock held by caller if IRQ driven
  */
 
 static void NCR5380_reselect(struct Scsi_Host *instance) {
@@ -2696,16 +2730,19 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
 
 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
 
-	while (NCR5380_read(STATUS_REG) & SR_SEL);
+	/* FIXME: timeout too long, must fail to workqueue */	
+	if(NCR5380_poll_politely(instance, STATUS_REG, SR_SEL, 0, 2*HZ)<0)
+		abort = 1;
+		
 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 
 	/*
 	 * Wait for target to go into MSGIN.
-	 * FIXME: timeout needed
+	 * FIXME: timeout needed and fail to work queeu
 	 */
 
-	while (!(NCR5380_read(STATUS_REG) & SR_REQ))
-		cpu_relax();
+	if(NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 2*HZ))
+		abort = 1;
 
 	len = 1;
 	data = msg;
@@ -2713,7 +2750,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
 	NCR5380_transfer_pio(instance, &phase, &len, &data);
 
 	if (!msg[0] & 0x80) {
-		printk("scsi%d : expecting IDENTIFY message, got ", instance->host_no);
+		printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no);
 		print_msg(msg);
 		abort = 1;
 	} else {
@@ -2747,7 +2784,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
 				break;
 			}
 		if (!tmp) {
-			printk("scsi%d : warning : target bitmask %02x lun %d not in disconnect_queue.\n", instance->host_no, target_mask, lun);
+			printk(KERN_ERR "scsi%d : warning : target bitmask %02x lun %d not in disconnect_queue.\n", instance->host_no, target_mask, lun);
 			/* 
 			 * Since we have an established nexus that we can't do anything with,
 			 * we must abort it.  
@@ -2790,9 +2827,11 @@ static void NCR5380_dma_complete(NCR5380_instance * instance) {
 	 *
 	 * We should use the Last Byte Sent bit, unfortunately this is 
 	 * not available on the 5380/5381 (only the various CMOS chips)
+	 *
+	 * FIXME: timeout, and need to handle long timeout/irq case
 	 */
 
-	while (NCR5380_read(BUS_AND_STATUS_REG) & BASR_ACK);
+	NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, BASR_ACK, 0, 5*HZ);
 
 	NCR5380_write(MODE_REG, MR_BASE);
 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -2827,21 +2866,15 @@ static void NCR5380_dma_complete(NCR5380_instance * instance) {
  *	a problem, we could implement longjmp() / setjmp(), setjmp()
  *	called where the loop started in NCR5380_main().
  *
- * Locks: host lock taken by function
+ * Locks: host lock taken by caller
  */
 
-#ifndef NCR5380_abort
-static
-#endif
-int NCR5380_abort(Scsi_Cmnd * cmd) {
+static int NCR5380_abort(Scsi_Cmnd * cmd) {
 	NCR5380_local_declare();
 	struct Scsi_Host *instance = cmd->host;
-	unsigned long flags;
 	struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
 	Scsi_Cmnd *tmp, **prev;
 	
-	spin_lock_irqsave(instance->host_lock, flags);
-
 	printk(KERN_WARNING "scsi%d : aborting command\n", instance->host_no);
 	print_Scsi_Cmnd(cmd);
 
@@ -2884,7 +2917,6 @@ int NCR5380_abort(Scsi_Cmnd * cmd) {
  * aborted flag and get back into our main loop.
  */
 
-		spin_unlock_irqrestore(instance->host_lock, flags);
 		return 0;
 	}
 #endif
@@ -2894,8 +2926,6 @@ int NCR5380_abort(Scsi_Cmnd * cmd) {
  *          from the issue queue.
  */
  
- 	/* FIXME: check - I think we need the hostdata lock here */
-	/* KLL */
 	dprintk(NDEBUG_ABORT, ("scsi%d : abort going into loop.\n", instance->host_no));
 	for (prev = (Scsi_Cmnd **) & (hostdata->issue_queue), tmp = (Scsi_Cmnd *) hostdata->issue_queue; tmp; prev = (Scsi_Cmnd **) & (tmp->host_scribble), tmp = (Scsi_Cmnd *) tmp->host_scribble)
 		if (cmd == tmp) {
@@ -2905,7 +2935,6 @@ int NCR5380_abort(Scsi_Cmnd * cmd) {
 			tmp->result = DID_ABORT << 16;
 			dprintk(NDEBUG_ABORT, ("scsi%d : abort removed command from issue queue.\n", instance->host_no));
 			tmp->done(tmp);
-			spin_unlock_irqrestore(instance->host_lock, flags);
 			return SUCCESS;
 		}
 #if (NDEBUG  & NDEBUG_ABORT)
@@ -2927,7 +2956,6 @@ int NCR5380_abort(Scsi_Cmnd * cmd) {
 
 	if (hostdata->connected) {
 		dprintk(NDEBUG_ABORT, ("scsi%d : abort failed, command connected.\n", instance->host_no));
-		spin_unlock_irqrestore(instance->host_lock, flags);
 		return FAILED;
 	}
 /*
@@ -2972,7 +3000,6 @@ int NCR5380_abort(Scsi_Cmnd * cmd) {
 					tmp->host_scribble = NULL;
 					tmp->result = DID_ABORT << 16;
 					tmp->done(tmp);
-					spin_unlock_irqrestore(instance->host_lock, flags);
 					return SUCCESS;
 				}
 		}
@@ -2985,7 +3012,6 @@ int NCR5380_abort(Scsi_Cmnd * cmd) {
  * so we won't panic, but we will notify the user in case something really
  * broke.
  */
-	spin_unlock_irqrestore(instance->host_lock, flags);
 	printk(KERN_WARNING "scsi%d : warning : SCSI command probably completed successfully\n"
 			"         before abortion\n", instance->host_no);
 	return FAILED;
@@ -2999,22 +3025,15 @@ int NCR5380_abort(Scsi_Cmnd * cmd) {
  *
  * Returns : SUCCESS
  *
- * Locks: host lock taken by function
+ * Locks: host lock taken by caller
  */
 
-#ifndef NCR5380_bus_reset
-static
-#endif
-int NCR5380_bus_reset(Scsi_Cmnd * cmd) {
-	unsigned long flags;
-	struct Scsi_Host *instance = cmd->host;
+static int NCR5380_bus_reset(Scsi_Cmnd * cmd) {
 	NCR5380_local_declare();
 	NCR5380_setup(cmd->host);
 
-	spin_lock_irqsave(instance->host_lock, flags);
 	NCR5380_print_status(cmd->host);
 	do_reset(cmd->host);
-	spin_unlock_irqrestore(instance->host_lock, flags);
 	return SUCCESS;
 }
 
@@ -3028,12 +3047,7 @@ int NCR5380_bus_reset(Scsi_Cmnd * cmd) {
  * Locks: io_request_lock held by caller
  */
 
-#ifndef NCR5380_device_reset
-static
-#endif
-int NCR5380_device_reset(Scsi_Cmnd * cmd) {
-	NCR5380_local_declare();
-	NCR5380_setup(cmd->host);
+static int NCR5380_device_reset(Scsi_Cmnd * cmd) {
 	return FAILED;
 }
 
@@ -3047,11 +3061,6 @@ int NCR5380_device_reset(Scsi_Cmnd * cmd) {
  * Locks: io_request_lock held by caller
  */
 
-#ifndef NCR5380_host_reset
-static
-#endif
-int NCR5380_host_reset(Scsi_Cmnd * cmd) {
-	NCR5380_local_declare();
-	NCR5380_setup(cmd->host);
+static int NCR5380_host_reset(Scsi_Cmnd * cmd) {
 	return FAILED;
 }

drivers/scsi/NCR53c406a.c

@@ -677,22 +677,6 @@ static void wait_intr(void)
 	NCR53c406a_intr(0, NULL, NULL);
 }
 
-static int NCR53c406a_command(Scsi_Cmnd * SCpnt)
-{
-	DEB(printk("NCR53c406a_command called\n"));
-	NCR53c406a_queue(SCpnt, internal_done);
-	if (irq_level)
-		while (!internal_done_flag)
-			cpu_relax();
-	else			/* interrupts not supported */
-		while (!internal_done_flag)
-			wait_intr();
-
-	internal_done_flag = 0;
-	return internal_done_errcode;
-}
-
-
 static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 {
 	int i;
@@ -726,6 +710,21 @@ static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static int NCR53c406a_command(Scsi_Cmnd * SCpnt)
+{
+	DEB(printk("NCR53c406a_command called\n"));
+	NCR53c406a_queue(SCpnt, internal_done);
+	if (irq_level)
+		while (!internal_done_flag)
+			cpu_relax();
+	else			/* interrupts not supported */
+		while (!internal_done_flag)
+			wait_intr();
+
+	internal_done_flag = 0;
+	return internal_done_errcode;
+}
+
 static int NCR53c406a_abort(Scsi_Cmnd * SCpnt)
 {
 	DEB(printk("NCR53c406a_abort called\n"));
@@ -755,7 +754,7 @@ static int NCR53c406a_bus_reset(Scsi_Cmnd * SCpnt)
 	return FAILED;
 }
 
-static int NCR53c406a_biosparm(struct scsi_disk *disk,
+static int NCR53c406a_biosparm(struct scsi_device *disk,
                                struct block_device *dev,
 			       sector_t capacity, int *info_array)
 {
@@ -1065,8 +1064,30 @@ static void __init calc_port_addr(void)
 
 MODULE_LICENSE("GPL");
 
-/* Eventually this will go into an include file, but this will be later */
-static Scsi_Host_Template driver_template = NCR53c406a;
+/* NOTE:  scatter-gather support only works in PIO mode.
+ * Use SG_NONE if DMA mode is enabled!
+ */
+
+static Scsi_Host_Template driver_template = 
+{
+     proc_name:         	"NCR53c406a"		/* proc_name */,        
+     name:              	"NCR53c406a"		/* name */,             
+     detect:            	NCR53c406a_detect	/* detect */,           
+     info:              	NCR53c406a_info		/* info */,             
+     command:           	NCR53c406a_command	/* command */,          
+     queuecommand:      	NCR53c406a_queue	/* queuecommand */,     
+     eh_abort_handler:  	NCR53c406a_abort	/* abort */,            
+     eh_bus_reset_handler:      NCR53c406a_bus_reset	/* reset */,            
+     eh_device_reset_handler:   NCR53c406a_device_reset	/* reset */,            
+     eh_host_reset_handler:     NCR53c406a_host_reset	/* reset */,            
+     bios_param:        	NCR53c406a_biosparm	/* biosparm */,         
+     can_queue:         	1			/* can_queue */,        
+     this_id:           	7			/* SCSI ID of the chip */,
+     sg_tablesize:      	32			/*SG_ALL*/ /*SG_NONE*/, 
+     cmd_per_lun:       	1			/* commands per lun */, 
+     unchecked_isa_dma: 	1			/* unchecked_isa_dma */,
+     use_clustering:    	ENABLE_CLUSTERING                               
+};
 
 #include "scsi_module.c"
 

drivers/scsi/NCR53c406a.h

-#ifndef _NCR53C406A_H
-#define _NCR53C406A_H
-
-/*
- *  NCR53c406a.h
- * 
- *  Copyright (C) 1994 Normunds Saumanis (normunds@rx.tech.swh.lv)
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2, or (at your option) any
- *  later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- */
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-/* NOTE:  scatter-gather support only works in PIO mode.
- * Use SG_NONE if DMA mode is enabled!
- */
-#define NCR53c406a { \
-     proc_name:         	"NCR53c406a"		/* proc_name */,        \
-     name:              	"NCR53c406a"		/* name */,             \
-     detect:            	NCR53c406a_detect	/* detect */,           \
-     info:              	NCR53c406a_info		/* info */,             \
-     command:           	NCR53c406a_command	/* command */,          \
-     queuecommand:      	NCR53c406a_queue	/* queuecommand */,     \
-     eh_abort_handler:  	NCR53c406a_abort	/* abort */,            \
-     eh_bus_reset_handler:      NCR53c406a_bus_reset	/* reset */,            \
-     eh_device_reset_handler:   NCR53c406a_device_reset	/* reset */,            \
-     eh_host_reset_handler:     NCR53c406a_host_reset	/* reset */,            \
-     bios_param:        	NCR53c406a_biosparm	/* biosparm */,         \
-     can_queue:         	1			/* can_queue */,        \
-     this_id:           	7			/* SCSI ID of the chip */, \
-     sg_tablesize:      	32			/*SG_ALL*/ /*SG_NONE*/, \
-     cmd_per_lun:       	1			/* commands per lun */, \
-     unchecked_isa_dma: 	1			/* unchecked_isa_dma */, \
-     use_clustering:    	ENABLE_CLUSTERING                               \
-}
-
-static int NCR53c406a_detect(Scsi_Host_Template *);
-static const char *NCR53c406a_info(struct Scsi_Host *);
-static int NCR53c406a_command(Scsi_Cmnd *);
-static int NCR53c406a_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
-static int NCR53c406a_abort(Scsi_Cmnd *);
-static int NCR53c406a_bus_reset(Scsi_Cmnd *);
-static int NCR53c406a_device_reset(Scsi_Cmnd *);
-static int NCR53c406a_host_reset(Scsi_Cmnd *);
-static int NCR53c406a_biosparm(Disk *, struct block_device *, sector_t, int[]);
-
-#endif				/* _NCR53C406A_H */

drivers/scsi/aha1740.c

@@ -20,6 +20,14 @@
  *
  * aha1740_makecode may still need even more work
  * if it doesn't work for your devices, take a look.
+ *
+ * Reworked for new_eh and new locking by Alan Cox <alan@redhat.com>
+ *
+ * For the avoidance of doubt the "preferred form" of this code is one which
+ * is in an open non patent encumbered format. Where cryptographic key signing
+ * forms part of the process of creating an executable the information
+ * including keys needed to generate an equivalently functional executable
+ * are deemed to be part of the source code.
  */
 
 #include <linux/module.h>
@@ -68,7 +76,7 @@ static spinlock_t aha1740_lock = SPIN_LOCK_UNLOCKED;
 /* One for each IRQ level (9-15) */
 static struct Scsi_Host * aha_host[8] = {NULL, };
 
-int aha1740_proc_info(char *buffer, char **start, off_t offset,
+static int aha1740_proc_info(char *buffer, char **start, off_t offset,
 		      int length, int hostno, int inout)
 {
     int len;
@@ -76,7 +84,7 @@ int aha1740_proc_info(char *buffer, char **start, off_t offset,
     struct aha1740_hostdata *host;
 
     if (inout)
-	return(-ENOSYS);
+	return-ENOSYS;
 
     for (len = 0; len < 8; len++) {
 	shpnt = aha_host[len];
@@ -103,7 +111,7 @@ int aha1740_proc_info(char *buffer, char **start, off_t offset,
 }
 
 
-int aha1740_makecode(unchar *sense, unchar *status)
+static int aha1740_makecode(unchar *sense, unchar *status)
 {
     struct statusword
     {
@@ -179,7 +187,7 @@ int aha1740_makecode(unchar *sense, unchar *status)
     return status[3] | retval << 16;
 }
 
-int aha1740_test_port(unsigned int base)
+static int aha1740_test_port(unsigned int base)
 {
     char name[4], tmp;
 
@@ -212,7 +220,7 @@ int aha1740_test_port(unsigned int base)
 }
 
 /* A "high" level interrupt handler */
-void aha1740_intr_handle(int irq, void *dev_id, struct pt_regs * regs)
+static void aha1740_intr_handle(int irq, void *dev_id, struct pt_regs * regs)
 {
     struct Scsi_Host *host = aha_host[irq - 9];
     void (*my_done)(Scsi_Cmnd *);
@@ -303,7 +311,7 @@ void aha1740_intr_handle(int irq, void *dev_id, struct pt_regs * regs)
     spin_unlock_irqrestore(host->host_lock, flags);
 }
 
-int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
+static int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
 {
     unchar direction;
     unchar *cmd = (unchar *) SCpnt->cmnd;
@@ -317,16 +325,6 @@ int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
 
     if(*cmd == REQUEST_SENSE)
     {
-#if 0
-	/* scsi_request_sense() provides a buffer of size 256,
-	   so there is no reason to expect equality */
-
-	if (bufflen != sizeof(SCpnt->sense_buffer))
-	{
-	    printk("Wrong buffer length supplied for request sense (%d)\n",
-		   bufflen);
-	}
-#endif	
 	SCpnt->result = 0;
 	done(SCpnt); 
 	return 0;
@@ -486,7 +484,7 @@ static void internal_done(Scsi_Cmnd * SCpnt)
     SCpnt->SCp.Status++;
 }
 
-int aha1740_command(Scsi_Cmnd * SCpnt)
+static int aha1740_command(Scsi_Cmnd * SCpnt)
 {
     aha1740_queuecommand(SCpnt, internal_done);
     SCpnt->SCp.Status = 0;
@@ -501,7 +499,7 @@ int aha1740_command(Scsi_Cmnd * SCpnt)
 /* Query the board for its irq_level.  Nothing else matters
    in enhanced mode on an EISA bus. */
 
-void aha1740_getconfig(unsigned int base, unsigned int *irq_level,
+static void aha1740_getconfig(unsigned int base, unsigned int *irq_level,
 		       unsigned int *translation)
 {
     static int intab[] = { 9, 10, 11, 12, 0, 14, 15, 0 };
@@ -511,7 +509,7 @@ void aha1740_getconfig(unsigned int base, unsigned int *irq_level,
     outb(inb(INTDEF(base)) | 0x10, INTDEF(base));
 }
 
-int aha1740_detect(Scsi_Host_Template * tpnt)
+static int aha1740_detect(Scsi_Host_Template * tpnt)
 {
     int count = 0, slot;
 
@@ -540,8 +538,8 @@ int aha1740_detect(Scsi_Host_Template * tpnt)
 	    outb(G2CNTRL_HRST, G2CNTRL(slotbase));
 	    outb(0, G2CNTRL(slotbase));
 	}
-	printk("Configuring aha174x at IO:%x, IRQ %d\n", slotbase, irq_level);
-	printk("aha174x: Extended translation %sabled.\n",
+	printk(KERN_INFO "Configuring aha174x at IO:%x, IRQ %d\n", slotbase, irq_level);
+	printk(KERN_INFO "aha174x: Extended translation %sabled.\n",
 	       translation ? "en" : "dis");
 	DEB(printk("aha1740_detect: enable interrupt channel %d\n",irq_level));
 	if (request_irq(irq_level,aha1740_intr_handle,0,"aha1740",NULL)) {
@@ -572,31 +570,7 @@ int aha1740_detect(Scsi_Host_Template * tpnt)
     return count;
 }
 
-/* Note:  They following two functions do not apply very well to the Adaptec,
-   which basically manages its own affairs quite well without our interference,
-   so I haven't put anything into them.  I can faintly imagine someone with a
-   *very* badly behaved SCSI target (perhaps an old tape?) wanting the abort(),
-   but it hasn't happened yet, and doing aborts brings the Adaptec to its
-   knees.  I cannot (at this moment in time) think of any reason to reset the
-   card once it's running.  So there. */
-
-int aha1740_abort(Scsi_Cmnd * SCpnt)
-{
-    DEB(printk("aha1740_abort called\n"));
-    return SCSI_ABORT_SNOOZE;
-}
-
-/* We do not implement a reset function here, but the upper level code assumes
-   that it will get some kind of response for the command in SCpnt.  We must
-   oblige, or the command will hang the scsi system */
-
-int aha1740_reset(Scsi_Cmnd * SCpnt, unsigned int ignored)
-{
-    DEB(printk("aha1740_reset called\n"));
-    return SCSI_RESET_PUNT;
-}
-
-int aha1740_biosparam(struct scsi_device *sdev, struct block_device *dev,
+static int aha1740_biosparam(struct scsi_device *sdev, struct block_device *dev,
 		sector_t capacity, int* ip)
 {
     int size = capacity;

drivers/scsi/aha1740.h

@@ -13,8 +13,8 @@
 #include <linux/types.h>
 
 /* Eisa Enhanced mode operation - slot locating and addressing */
-#define MINEISA 1   /* I don't have an EISA Spec to know these ranges, so I */
-#define MAXEISA 8   /* Just took my machine's specifications.  Adjust to fit.*/
+#define MINEISA 1		/* I don't have an EISA Spec to know these ranges, so I */
+#define MAXEISA 8		/* Just took my machine's specifications.  Adjust to fit. */
 		    /* I just saw an ad, and bumped this from 6 to 8 */
 #define	SLOTBASE(x)	((x << 12) + 0xc80)
 #define SLOTSIZE	0x5c
@@ -75,14 +75,14 @@
 #define	ATTN_START	0x40	/* Start CCB */
 #define	ATTN_ABORT	0x50	/* Abort CCB */
 
-#define G2CNTRL_HRST	0x80		/* Hard Reset */
-#define G2CNTRL_IRST	0x40		/* Clear EISA Interrupt */
-#define G2CNTRL_HRDY	0x20		/* Sets HOST ready */
+#define G2CNTRL_HRST	0x80	/* Hard Reset */
+#define G2CNTRL_IRST	0x40	/* Clear EISA Interrupt */
+#define G2CNTRL_HRDY	0x20	/* Sets HOST ready */
 
 /* This is used with scatter-gather */
 struct aha1740_chain {
-  u32  dataptr;		/* Location of data */
-  u32  datalen;		/* Size of this part of chain */
+	u32 dataptr;		/* Location of data */
+	u32 datalen;		/* Size of this part of chain */
 };
 
 /* These belong in scsi.h */
@@ -107,40 +107,40 @@ struct aha1740_chain {
 #define MAX_STATUS 32
 
 struct ecb {			/* Enhanced Control Block 6.1 */
-  u16	cmdw;			/* Command Word */
-  /* Flag Word 1 */
-  u16		cne:1,		/* Control Block Chaining */
-	:6,	di:1,		/* Disable Interrupt */
-	:2,	ses:1,		/* Suppress Underrun error */
-	:1,	sg:1,		/* Scatter/Gather */
-	:1,	dsb:1,		/* Disable Status Block */
-		ars:1;		/* Automatic Request Sense */
-  /* Flag Word 2 */
-  u16		lun:3,		/* Logical Unit */
-		tag:1,		/* Tagged Queuing */
-		tt:2,		/* Tag Type */
-		nd:1,		/* No Disconnect */
-	:1,	dat:1,		/* Data transfer - check direction */
-		dir:1,		/* Direction of transfer 1 = datain */
-		st:1,		/* Suppress Transfer */
-		chk:1,		/* Calculate Checksum */
-	:2,	rec:1,	:1;	/* Error Recovery */
-  u16	nil0;			/* nothing */
-  u32	dataptr;		/* Data or Scatter List ptr */
-  u32	datalen;		/* Data or Scatter List len */
-  u32	statusptr;		/* Status Block ptr */
-  u32	linkptr;		/* Chain Address */
-  u32	nil1;			/* nothing */
-  u32	senseptr;		/* Sense Info Pointer */
-  u8	senselen;		/* Sense Length */
-  u8	cdblen;			/* CDB Length */
-  u16	datacheck;		/* Data checksum */
-  u8	cdb[MAX_CDB];		/* CDB area */
+	u16 cmdw;		/* Command Word */
+	/* Flag Word 1 */
+	u16 cne:1,		/* Control Block Chaining */
+	:6, di:1,		/* Disable Interrupt */
+	:2, ses:1,		/* Suppress Underrun error */
+	:1, sg:1,		/* Scatter/Gather */
+	:1, dsb:1,		/* Disable Status Block */
+	 ars:1;			/* Automatic Request Sense */
+	/* Flag Word 2 */
+	u16 lun:3,		/* Logical Unit */
+	 tag:1,			/* Tagged Queuing */
+	 tt:2,			/* Tag Type */
+	 nd:1,			/* No Disconnect */
+	:1, dat:1,		/* Data transfer - check direction */
+	 dir:1,			/* Direction of transfer 1 = datain */
+	 st:1,			/* Suppress Transfer */
+	 chk:1,			/* Calculate Checksum */
+	:2, rec:1,:1;		/* Error Recovery */
+	u16 nil0;		/* nothing */
+	u32 dataptr;		/* Data or Scatter List ptr */
+	u32 datalen;		/* Data or Scatter List len */
+	u32 statusptr;		/* Status Block ptr */
+	u32 linkptr;		/* Chain Address */
+	u32 nil1;		/* nothing */
+	u32 senseptr;		/* Sense Info Pointer */
+	u8 senselen;		/* Sense Length */
+	u8 cdblen;		/* CDB Length */
+	u16 datacheck;		/* Data checksum */
+	u8 cdb[MAX_CDB];	/* CDB area */
 /* Hardware defined portion ends here, rest is driver defined */
-  u8	sense[MAX_SENSE];	/* Sense area */ 
-  u8	status[MAX_STATUS];	/* Status area */
-  Scsi_Cmnd *SCpnt;		/* Link to the SCSI Command Block */
-  void (*done)(Scsi_Cmnd *);	/* Completion Function */
+	u8 sense[MAX_SENSE];	/* Sense area */
+	u8 status[MAX_STATUS];	/* Status area */
+	Scsi_Cmnd *SCpnt;	/* Link to the SCSI Command Block */
+	void (*done) (Scsi_Cmnd *);	/* Completion Function */
 };
 
 #define	AHA1740CMD_NOP	 0x00	/* No OP */
@@ -152,32 +152,22 @@ struct ecb {			/* Enhanced Control Block 6.1 */
 #define AHA1740CMD_RINQ  0x0a	/* Read Host Adapter Inquiry Data */
 #define AHA1740CMD_TARG  0x10	/* Target SCSI Command */
 
-int aha1740_detect(Scsi_Host_Template *);
-int aha1740_command(Scsi_Cmnd *);
-int aha1740_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int aha1740_abort(Scsi_Cmnd *);
-int aha1740_reset(Scsi_Cmnd *, unsigned int);
-int aha1740_biosparam(struct scsi_device *, struct block_device *,
-		sector_t, int*);
-int aha1740_proc_info(char *buffer, char **start, off_t offset,
-                               int length, int hostno, int inout);
+static int aha1740_detect(Scsi_Host_Template *);
+static int aha1740_command(Scsi_Cmnd *);
+static int aha1740_queuecommand(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int aha1740_biosparam(struct scsi_device *, struct block_device *, sector_t, int *);
+static int aha1740_proc_info(char *buffer, char **start, off_t offset, int length, int hostno, int inout);
 
 #define AHA1740_ECBS 32
 #define AHA1740_SCATTER 16
 #define AHA1740_CMDLUN 1
 
-#ifndef NULL
-	#define NULL 0
-#endif
-
 #define AHA1740 {  proc_name:      "aha1740",				\
 		   proc_info:      aha1740_proc_info,	                \
 		   name:           "Adaptec 174x (EISA)",		\
 		   detect:         aha1740_detect,			\
 		   command:        aha1740_command,			\
 		   queuecommand:   aha1740_queuecommand,		\
-		   abort:          aha1740_abort,			\
-		   reset:          aha1740_reset,			\
 		   bios_param:     aha1740_biosparam,                   \
 		   can_queue:      AHA1740_ECBS, 			\
 		   this_id:        7, 					\

drivers/scsi/eata.c

@@ -476,7 +476,6 @@ MODULE_AUTHOR("Dario Ballabio");
 #include <linux/blk.h>
 #include "scsi.h"
 #include "hosts.h"
-#include "sd.h"
 #include <asm/dma.h>
 #include <asm/irq.h>
 #include "eata.h"
@@ -1838,7 +1837,7 @@ int eata2x_bios_param(struct scsi_device *sdev, struct block_device *bdev,
 		sector_t capacity, int *dkinfo) {
    int size = capacity;
 
-   if (ext_tran || (scsicam_bios_param(disk, bdev, dkinfo) < 0)) {
+   if (ext_tran || (scsicam_bios_param(bdev, capacity, dkinfo) < 0)) {
       dkinfo[0] = 255;
       dkinfo[1] = 63;
       dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);

drivers/scsi/eata.h

@@ -18,8 +18,6 @@ static int eata2x_slave_attach(Scsi_Device *);
                 detect:                  eata2x_detect,                      \
                 release:                 eata2x_release,                     \
                 queuecommand:            eata2x_queuecommand,                \
-                abort:                   NULL,                               \
-                reset:                   NULL,                               \
                 eh_abort_handler:        eata2x_eh_abort,                    \
                 eh_device_reset_handler: NULL,                               \
                 eh_bus_reset_handler:    NULL,                               \

drivers/scsi/eata_pio.c

@@ -14,6 +14,9 @@
  *             neuffer@goofy.zdv.uni-mainz.de               *
  *             a.arnold@kfa-juelich.de                      * 
  *                                                          *
+ *  Updated 2002 by Alan Cox <alan@redhat.com> for Linux    *
+ *  2.5.x and the newer locking and error handling          *
+ *                                                          *
  *  This program is free software; you can redistribute it  *
  *  and/or modify it under the terms of the GNU General     *
  *  Public License as published by the Free Software        *
@@ -30,15 +33,23 @@
  *  Public License along with this kernel; if not, write to *
  *  the Free Software Foundation, Inc., 675 Mass Ave,       *
  *  Cambridge, MA 02139, USA.                               *
+ *							    *
+ *  For the avoidance of doubt the "preferred form" of this *
+ *  code is one which is in an open non patent encumbered   *
+ *  format. Where cryptographic key signing forms part of   *
+ *  the process of creating an executable the information   *
+ *  including keys needed to generate an equivalently       *
+ *  functional executable are deemed to be part of the 	    *
+ *  source code are deemed to be part of the source code.   *
  *                                                          *
  ************************************************************
- *  last change: 96/07/16                  OS: Linux 2.0.8  *
+ *  last change: 2002/11/02               OS: Linux 2.5.45  *
  ************************************************************/
 
 /* Look in eata_pio.h for configuration information */
 
 #include <linux/module.h>
- 
+
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/string.h>
@@ -57,902 +68,830 @@
 #include <linux/blk.h>
 #include <linux/spinlock.h>
 
-static uint ISAbases[MAXISA] =
-{0x1F0, 0x170, 0x330, 0x230};
-static uint ISAirqs[MAXISA] =
-{14,12,15,11};
-static unchar EISAbases[] =
-{1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1};
+static uint ISAbases[MAXISA] =	{
+	 0x1F0, 0x170, 0x330, 0x230
+};
+
+static uint ISAirqs[MAXISA] = {
+	14, 12, 15, 11
+};
+
+static unsigned char EISAbases[] = { 
+	1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1 
+};
+
 static uint registered_HBAs = 0;
-static struct Scsi_Host *last_HBA = NULL;
-static struct Scsi_Host *first_HBA = NULL;
-static unchar reg_IRQ[] =
-{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-static unchar reg_IRQL[] =
-{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+static struct Scsi_Host *last_HBA;
+static struct Scsi_Host *first_HBA;
+static unsigned char reg_IRQ[];
+static unsigned char reg_IRQL[];
 
-static ulong int_counter = 0;
-static ulong queue_counter = 0;
+static unsigned long int_counter = 0;
+static unsigned long queue_counter = 0;
 
 #include "eata_pio_proc.c"
- 
-#ifdef MODULE
-int eata_pio_release(struct Scsi_Host *sh)
+
+static int eata_pio_release(struct Scsi_Host *sh)
 {
-    if (sh->irq && reg_IRQ[sh->irq] == 1) free_irq(sh->irq, NULL);
-    else reg_IRQ[sh->irq]--;
-    if (SD(sh)->channel == 0) {
-	if (sh->io_port && sh->n_io_port)
-	    release_region(sh->io_port, sh->n_io_port);
-    }
-    return(TRUE);
+	if (sh->irq && reg_IRQ[sh->irq] == 1)
+		free_irq(sh->irq, NULL);
+	else
+		reg_IRQ[sh->irq]--;
+	if (SD(sh)->channel == 0) {
+		if (sh->io_port && sh->n_io_port)
+			release_region(sh->io_port, sh->n_io_port);
+	}
+	return (TRUE);
 }
-#endif
 
-void IncStat(Scsi_Pointer *SCp, uint Increment)
+static void IncStat(Scsi_Pointer * SCp, uint Increment)
 {
-    SCp->ptr+=Increment; 
-    if ((SCp->this_residual-=Increment)==0)
-    {
-	if ((--SCp->buffers_residual)==0) SCp->Status=FALSE;
-	else
-	{
-	    SCp->buffer++;
-	    SCp->ptr=page_address(SCp->buffer->page) + SCp->buffer->offset;
-	    SCp->this_residual=SCp->buffer->length;
+	SCp->ptr += Increment;
+	if ((SCp->this_residual -= Increment) == 0) {
+		if ((--SCp->buffers_residual) == 0)
+			SCp->Status = FALSE;
+		else {
+			SCp->buffer++;
+			SCp->ptr = page_address(SCp->buffer->page) + SCp->buffer->offset;
+			SCp->this_residual = SCp->buffer->length;
+		}
 	}
-    }
 }
 
-void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs * regs);
+static void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs);
 
-void do_eata_pio_int_handler(int irq, void *dev_id, struct pt_regs * regs)
+static void do_eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs)
 {
-    unsigned long flags;
-    struct Scsi_Host *dev = dev_id;
-    
-    spin_lock_irqsave(dev->host_lock, flags);
-    eata_pio_int_handler(irq, dev_id, regs);
-    spin_unlock_irqrestore(dev->host_lock, flags);
+	unsigned long flags;
+	struct Scsi_Host *dev = dev_id;
+
+	spin_lock_irqsave(dev->host_lock, flags);
+	eata_pio_int_handler(irq, dev_id, regs);
+	spin_unlock_irqrestore(dev->host_lock, flags);
 }
 
-void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs * regs)
+static void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs)
 {
-    uint eata_stat = 0xfffff;
-    Scsi_Cmnd *cmd;
-    hostdata *hd;
-    struct eata_ccb *cp;
-    uint base;
-    uint x,z;
-    struct Scsi_Host *sh;
-    ushort zwickel=0;
-    unchar stat,odd;
-    
-    for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->prev) {
-	if (sh->irq != irq)
-	    continue;
-	if (inb((uint)sh->base + HA_RSTATUS) & HA_SBUSY)
-	    continue;
-	
-	int_counter++;
-	
-	hd=SD(sh);
-	
-	cp = &hd->ccb[0];
-	cmd = cp->cmd;
-	base = (uint) cmd->host->base;
-	
-	do
+	uint eata_stat = 0xfffff;
+	Scsi_Cmnd *cmd;
+	hostdata *hd;
+	struct eata_ccb *cp;
+	uint base;
+	uint x, z;
+	struct Scsi_Host *sh;
+	unsigned short zwickel = 0;
+	unsigned char stat, odd;
+
+	for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->prev) 
 	{
-	    stat=inb(base+HA_RSTATUS);
-	    if (stat&HA_SDRQ) {
-		if (cp->DataIn)
-		{
-		    z=256; odd=FALSE;
-		    while ((cmd->SCp.Status)&&((z>0)||(odd)))
-		    {
-			if (odd) 
-			{ 
-			    *(cmd->SCp.ptr)=zwickel>>8; 
-			    IncStat(&cmd->SCp,1);
-			    odd=FALSE;
+		if (sh->irq != irq)
+			continue;
+		if (inb((uint) sh->base + HA_RSTATUS) & HA_SBUSY)
+			continue;
+
+		int_counter++;
+
+		hd = SD(sh);
+
+		cp = &hd->ccb[0];
+		cmd = cp->cmd;
+		base = (uint) cmd->host->base;
+
+		do {
+			stat = inb(base + HA_RSTATUS);
+			if (stat & HA_SDRQ) {
+				if (cp->DataIn) {
+					z = 256;
+					odd = FALSE;
+					while ((cmd->SCp.Status) && ((z > 0) || (odd))) {
+						if (odd) {
+							*(cmd->SCp.ptr) = zwickel >> 8;
+							IncStat(&cmd->SCp, 1);
+							odd = FALSE;
+						}
+						x = min_t(unsigned int, z, cmd->SCp.this_residual / 2);
+						insw(base + HA_RDATA, cmd->SCp.ptr, x);
+						z -= x;
+						IncStat(&cmd->SCp, 2 * x);
+						if ((z > 0) && (cmd->SCp.this_residual == 1)) {
+							zwickel = inw(base + HA_RDATA);
+							*(cmd->SCp.ptr) = zwickel & 0xff;
+							IncStat(&cmd->SCp, 1);
+							z--;
+							odd = TRUE;
+						}
+					}
+					while (z > 0) {
+						zwickel = inw(base + HA_RDATA);
+						z--;
+					}
+				} else {	/* cp->DataOut */
+
+					odd = FALSE;
+					z = 256;
+					while ((cmd->SCp.Status) && ((z > 0) || (odd))) {
+						if (odd) {
+							zwickel += *(cmd->SCp.ptr) << 8;
+							IncStat(&cmd->SCp, 1);
+							outw(zwickel, base + HA_RDATA);
+							z--;
+							odd = FALSE;
+						}
+						x = min_t(unsigned int, z, cmd->SCp.this_residual / 2);
+						outsw(base + HA_RDATA, cmd->SCp.ptr, x);
+						z -= x;
+						IncStat(&cmd->SCp, 2 * x);
+						if ((z > 0) && (cmd->SCp.this_residual == 1)) {
+							zwickel = *(cmd->SCp.ptr);
+							zwickel &= 0xff;
+							IncStat(&cmd->SCp, 1);
+							odd = TRUE;
+						}
+					}
+					while (z > 0 || odd) {
+						outw(zwickel, base + HA_RDATA);
+						z--;
+						odd = FALSE;
+					}
+				}
 			}
-			x=min_t(unsigned int,z,cmd->SCp.this_residual/2);
-			insw(base+HA_RDATA,cmd->SCp.ptr,x);
-			z-=x; 
-			IncStat(&cmd->SCp,2*x);
-			if ((z>0)&&(cmd->SCp.this_residual==1))
-			{
-			    zwickel=inw(base+HA_RDATA); 
-			    *(cmd->SCp.ptr)=zwickel&0xff;
-			    IncStat(&cmd->SCp,1); z--; 
-			    odd=TRUE;
-			}
-		    }
-		    while (z>0) {
-			zwickel=inw(base+HA_RDATA); 
-			z--;
-		    } 
 		}
-		else /* cp->DataOut */
-		{
-		    odd=FALSE; z=256;
-		    while ((cmd->SCp.Status)&&((z>0)||(odd)))
-		    {
-			if (odd)
-			{
-			    zwickel+=*(cmd->SCp.ptr)<<8; 
-			    IncStat(&cmd->SCp,1);
-			    outw(zwickel,base+HA_RDATA); 
-			    z--; 
-			    odd=FALSE; 
-			}
-			x=min_t(unsigned int,z,cmd->SCp.this_residual/2);
-			outsw(base+HA_RDATA,cmd->SCp.ptr,x);
-			z-=x; 
-			IncStat(&cmd->SCp,2*x);
-			if ((z>0)&&(cmd->SCp.this_residual==1))
-			{
-			    zwickel=*(cmd->SCp.ptr); 
-			    zwickel&=0xff;
-			    IncStat(&cmd->SCp,1); 
-			    odd=TRUE;
-			}  
-		    }
-		    while (z>0||odd) {
-			outw(zwickel,base+HA_RDATA); 
-			z--; 
-			odd=FALSE;
-		    }
+		while ((stat & HA_SDRQ) || ((stat & HA_SMORE) && hd->moresupport));
+
+		/* terminate handler if HBA goes busy again, i.e. transfers
+		 * more data */
+
+		if (stat & HA_SBUSY)
+			break;
+
+		/* OK, this is quite stupid, but I haven't found any correct
+		 * way to get HBA&SCSI status so far */
+
+		if (!(inb(base + HA_RSTATUS) & HA_SERROR)) {
+			cmd->result = (DID_OK << 16);
+			hd->devflags |= (1 << cp->cp_id);
+		} else if (hd->devflags & 1 << cp->cp_id)
+			cmd->result = (DID_OK << 16) + 0x02;
+		else
+			cmd->result = (DID_NO_CONNECT << 16);
+
+		if (cp->status == LOCKED) {
+			cp->status = FREE;
+			eata_stat = inb(base + HA_RSTATUS);
+			printk(KERN_CRIT "eata_pio: int_handler, freeing locked " "queueslot\n");
+			return;
 		}
-	    }
-	}
-	while ((stat&HA_SDRQ)||((stat&HA_SMORE)&&hd->moresupport));
-	
-	/* terminate handler if HBA goes busy again, i.e. transfers
-	 * more data */
-	
-	if (stat&HA_SBUSY) break;
-	
-	/* OK, this is quite stupid, but I haven't found any correct
-	 * way to get HBA&SCSI status so far */
-	
-	if (!(inb(base+HA_RSTATUS)&HA_SERROR))
-	{
-	    cmd->result=(DID_OK<<16); 
-	    hd->devflags|=(1<<cp->cp_id);
-	}
-	else if (hd->devflags&1<<cp->cp_id) 
-	    cmd->result=(DID_OK<<16)+0x02;
-	else cmd->result=(DID_NO_CONNECT<<16);
-	
-	if (cp->status == LOCKED) {
-	    cp->status = FREE;
-	    eata_stat = inb(base + HA_RSTATUS);
-	    printk(KERN_CRIT "eata_pio: int_handler, freeing locked "
-                   "queueslot\n");
-	    return;
-	}
-	
 #if DBG_INTR2
-	if (stat != 0x50) 
-	    printk(KERN_DEBUG "stat: %#.2x, result: %#.8x\n", stat, 
-                   cmd->result); 
+		if (stat != 0x50)
+			printk(KERN_DEBUG "stat: %#.2x, result: %#.8x\n", stat, cmd->result);
 #endif
-	
-	cp->status = FREE;   /* now we can release the slot  */
-	
-	cmd->scsi_done(cmd);
-    }
-    
-    return;
+
+		cp->status = FREE;	/* now we can release the slot  */
+
+		cmd->scsi_done(cmd);
+	}
+
+	return;
 }
 
-inline uint eata_pio_send_command(uint base, unchar command)
+static inline uint eata_pio_send_command(uint base, unsigned char command)
 {
-    uint loop = HZ/2;
-    
-    while (inb(base + HA_RSTATUS) & HA_SBUSY)
-	if (--loop == 0)
-	    return(TRUE);
-
-    /* Enable interrupts for HBA.  It is not the best way to do it at this
-     * place, but I hope that it doesn't interfere with the IDE driver 
-     * initialization this way */
-
-    outb(HA_CTRL_8HEADS,base+HA_CTRLREG);
-    
-    outb(command, base + HA_WCOMMAND);
-    return(FALSE);
+	uint loop = HZ / 2;
+
+	while (inb(base + HA_RSTATUS) & HA_SBUSY)
+		if (--loop == 0)
+			return (TRUE);
+
+	/* Enable interrupts for HBA.  It is not the best way to do it at this
+	 * place, but I hope that it doesn't interfere with the IDE driver 
+	 * initialization this way */
+
+	outb(HA_CTRL_8HEADS, base + HA_CTRLREG);
+
+	outb(command, base + HA_WCOMMAND);
+	return (FALSE);
 }
 
-int eata_pio_queue(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int eata_pio_queue(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 {
-    uint x, y;
-    uint base;
-    
-    hostdata *hd;
-    struct Scsi_Host *sh;
-    struct eata_ccb *cp;
-    
-    queue_counter++;
-    
-    hd = HD(cmd);
-    sh = cmd->host;
-    base = (uint) sh->base;
-    
-    /* use only slot 0, as 2001 can handle only one cmd at a time */
-    
-    y = x = 0;
-    
-    if (hd->ccb[y].status!=FREE) { 
-	
-	DBG(DBG_QUEUE, printk(KERN_EMERG "can_queue %d, x %d, y %d\n",
-                              sh->can_queue,x,y));
+	uint x, y;
+	uint base;
+
+	hostdata *hd;
+	struct Scsi_Host *sh;
+	struct eata_ccb *cp;
+
+	queue_counter++;
+
+	hd = HD(cmd);
+	sh = cmd->host;
+	base = (uint) sh->base;
+
+	/* use only slot 0, as 2001 can handle only one cmd at a time */
+
+	y = x = 0;
+
+	if (hd->ccb[y].status != FREE) {
+
+		DBG(DBG_QUEUE, printk(KERN_EMERG "can_queue %d, x %d, y %d\n", sh->can_queue, x, y));
 #if DEBUG_EATA
-	panic(KERN_EMERG "eata_pio: run out of queue slots cmdno:%ld "
-              "intrno: %ld\n", queue_counter, int_counter);
+		panic(KERN_EMERG "eata_pio: run out of queue slots cmdno:%ld " "intrno: %ld\n", queue_counter, int_counter);
 #else
-	panic(KERN_EMERG "eata_pio: run out of queue slots....\n");
+		panic(KERN_EMERG "eata_pio: run out of queue slots....\n");
 #endif
-    }
-    
-    cp = &hd->ccb[y];
-    
-    memset(cp, 0, sizeof(struct eata_ccb));
-    memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
-	
-    cp->status = USED;      /* claim free slot */
-
-    DBG(DBG_QUEUE, printk(KERN_DEBUG "eata_pio_queue pid %ld, target: %x, lun:"
-                          " %x, y %d\n", cmd->pid, cmd->target, cmd->lun, y));
-    
-    cmd->scsi_done = (void *)done;
-    
-    /* FIXME: use passed direction flag !! */
-    switch (cmd->cmnd[0]) {
-    case CHANGE_DEFINITION: case COMPARE:         case COPY:
-    case COPY_VERIFY:       case LOG_SELECT:      case MODE_SELECT:
-    case MODE_SELECT_10:    case SEND_DIAGNOSTIC: case WRITE_BUFFER:
-    case FORMAT_UNIT:       case REASSIGN_BLOCKS: case RESERVE:
-    case SEARCH_EQUAL:      case SEARCH_HIGH:     case SEARCH_LOW:
-    case WRITE_6:           case WRITE_10:        case WRITE_VERIFY:
-    case UPDATE_BLOCK:      case WRITE_LONG:      case WRITE_SAME:      
-    case SEARCH_HIGH_12:    case SEARCH_EQUAL_12: case SEARCH_LOW_12:
-    case WRITE_12:          case WRITE_VERIFY_12: case SET_WINDOW: 
-    case MEDIUM_SCAN:       case SEND_VOLUME_TAG:            
-    case 0xea:      /* alternate number for WRITE LONG */
-	cp->DataOut = TRUE; /* Output mode */
-	break;
-    case TEST_UNIT_READY:
-    default:
-	cp->DataIn = TRUE;  /* Input mode  */
-    }
-    
-    cp->Interpret = (cmd->target == hd->hostid);
-    cp->cp_datalen = htonl((ulong)cmd->request_bufflen);
-    cp->Auto_Req_Sen = FALSE;
-    cp->cp_reqDMA = htonl(0);
-    cp->reqlen = 0;
-    
-    cp->cp_id = cmd->target;
-    cp->cp_lun = cmd->lun;
-    cp->cp_dispri = FALSE;
-    cp->cp_identify = TRUE;
-    memcpy(cp->cp_cdb, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
-    
-    cp->cp_statDMA = htonl(0);
-    
-    cp->cp_viraddr = cp;
-    cp->cmd = cmd;
-    cmd->host_scribble = (char *)&hd->ccb[y];   
-    
-    if (cmd->use_sg == 0)
-    { 
-	cmd->SCp.buffers_residual=1;
-	cmd->SCp.ptr = cmd->request_buffer;
-	cmd->SCp.this_residual = cmd->request_bufflen;
-	cmd->SCp.buffer = NULL;
-    } else {
-	cmd->SCp.buffer = cmd->request_buffer;
-	cmd->SCp.buffers_residual = cmd->use_sg;
-	cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) + cmd->SCp.buffer->offset;
-	cmd->SCp.this_residual = cmd->SCp.buffer->length;
-    }
-    cmd->SCp.Status = (cmd->SCp.this_residual != 0);  /* TRUE as long as bytes 
-                                                       * are to transfer */ 
-    
-    if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP)) 
-    {
-	cmd->result = DID_BUS_BUSY << 16;
-	printk(KERN_NOTICE "eata_pio_queue target %d, pid %ld, HBA busy, "
-               "returning DID_BUS_BUSY, done.\n", cmd->target, cmd->pid);
-        done(cmd);
-        cp->status = FREE;      
+	}
+
+	cp = &hd->ccb[y];
+
+	memset(cp, 0, sizeof(struct eata_ccb));
+	memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+
+	cp->status = USED;	/* claim free slot */
+
+	DBG(DBG_QUEUE, printk(KERN_DEBUG "eata_pio_queue pid %ld, target: %x, lun:" " %x, y %d\n", cmd->pid, cmd->target, cmd->lun, y));
+
+	cmd->scsi_done = (void *) done;
+
+	if(cmd->sc_data_direction == SCSI_DATA_WRITE)
+		cp->DataOut = TRUE;	/* Output mode */
+	else
+		cp->DataIn = TRUE;	/* Input mode  */
+
+	cp->Interpret = (cmd->target == hd->hostid);
+	cp->cp_datalen = htonl((unsigned long) cmd->request_bufflen);
+	cp->Auto_Req_Sen = FALSE;
+	cp->cp_reqDMA = htonl(0);
+	cp->reqlen = 0;
+
+	cp->cp_id = cmd->target;
+	cp->cp_lun = cmd->lun;
+	cp->cp_dispri = FALSE;
+	cp->cp_identify = TRUE;
+	memcpy(cp->cp_cdb, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
+
+	cp->cp_statDMA = htonl(0);
+
+	cp->cp_viraddr = cp;
+	cp->cmd = cmd;
+	cmd->host_scribble = (char *) &hd->ccb[y];
+
+	if (cmd->use_sg == 0) {
+		cmd->SCp.buffers_residual = 1;
+		cmd->SCp.ptr = cmd->request_buffer;
+		cmd->SCp.this_residual = cmd->request_bufflen;
+		cmd->SCp.buffer = NULL;
+	} else {
+		cmd->SCp.buffer = cmd->request_buffer;
+		cmd->SCp.buffers_residual = cmd->use_sg;
+		cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) + cmd->SCp.buffer->offset;
+		cmd->SCp.this_residual = cmd->SCp.buffer->length;
+	}
+	cmd->SCp.Status = (cmd->SCp.this_residual != 0);	/* TRUE as long as bytes 
+								 * are to transfer */
+
+	if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP)) {
+		cmd->result = DID_BUS_BUSY << 16;
+		printk(KERN_NOTICE "eata_pio_queue target %d, pid %ld, HBA busy, " "returning DID_BUS_BUSY, done.\n", cmd->target, cmd->pid);
+		done(cmd);
+		cp->status = FREE;
+		return (0);
+	}
+	/* FIXME: timeout */
+	while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
+		cpu_relax();
+	outsw(base + HA_RDATA, cp, hd->cplen);
+	outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
+	for (x = 0; x < hd->cppadlen; x++)
+		outw(0, base + HA_RDATA);
+
+	DBG(DBG_QUEUE, printk(KERN_DEBUG "Queued base %#.4lx pid: %ld target: %x " "lun: %x slot %d irq %d\n", (long) sh->base, cmd->pid, cmd->target, cmd->lun, y, sh->irq));
+
 	return (0);
-    }
-    while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
-    	cpu_relax();
-    outsw(base + HA_RDATA, cp, hd->cplen);
-    outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
-    for (x = 0; x < hd->cppadlen; x++) outw(0, base + HA_RDATA);
-    
-    DBG(DBG_QUEUE,printk(KERN_DEBUG "Queued base %#.4lx pid: %ld target: %x "
-                         "lun: %x slot %d irq %d\n", (long)sh->base, cmd->pid, 
-			 cmd->target, cmd->lun, y, sh->irq));
-    
-    return (0);
 }
 
-int eata_pio_abort(Scsi_Cmnd * cmd)
+static int eata_pio_abort(Scsi_Cmnd * cmd)
 {
-    ulong flags;
-    uint loop = HZ;
-    
-    spin_lock_irqsave(cmd->host->host_lock, flags);    
-    DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_abort called pid: %ld "
-                           "target: %x lun: %x reason %x\n", cmd->pid, 
-                           cmd->target, cmd->lun, cmd->abort_reason));
-    
-    
-    while (inb((uint)(cmd->host->base) + HA_RAUXSTAT) & HA_ABUSY)
-	if (--loop == 0) {
-	    printk(KERN_WARNING "eata_pio: abort, timeout error.\n");
-	    spin_unlock_irqrestore(cmd->host->host_lock, flags);    
-	    return (SCSI_ABORT_ERROR);
+	uint loop = HZ;
+
+	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_abort called pid: %ld " "target: %x lun: %x reason %x\n", cmd->pid, cmd->target, cmd->lun, cmd->abort_reason));
+
+
+	while (inb(cmd->host->base + HA_RAUXSTAT) & HA_ABUSY)
+		if (--loop == 0) {
+			printk(KERN_WARNING "eata_pio: abort, timeout error.\n");
+			return FAILED;
+		}
+	if (CD(cmd)->status == FREE) {
+		DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_NOT_RUNNING\n"));
+		return FAILED;
+	}
+	if (CD(cmd)->status == USED) {
+		DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_BUSY\n"));
+		/* We want to sleep a bit more here */
+		return FAILED;		/* SNOOZE */
+	}
+	if (CD(cmd)->status == RESET) {
+		printk(KERN_WARNING "eata_pio: abort, command reset error.\n");
+		return FAILED;
+	}
+	if (CD(cmd)->status == LOCKED) {
+		DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio: abort, queue slot " "locked.\n"));
+		return FAILED;
 	}
-    if (CD(cmd)->status == FREE) {
-	DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_NOT_RUNNING\n")); 
-        spin_unlock_irqrestore(cmd->host->host_lock, flags);    
-	return (SCSI_ABORT_NOT_RUNNING);
-    }
-    if (CD(cmd)->status == USED) {
-	DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_BUSY\n"));
-        spin_unlock_irqrestore(cmd->host->host_lock, flags);    
-	return (SCSI_ABORT_BUSY);  /* SNOOZE */ 
-    }
-    if (CD(cmd)->status == RESET) {
-        spin_unlock_irqrestore(cmd->host->host_lock, flags);    
-	printk(KERN_WARNING "eata_pio: abort, command reset error.\n");
-	return (SCSI_ABORT_ERROR);
-    }
-    if (CD(cmd)->status == LOCKED) {
-        spin_unlock_irqrestore(cmd->host->host_lock, flags);    
-	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio: abort, queue slot "
-                               "locked.\n"));
-	return (SCSI_ABORT_NOT_RUNNING);
-    }
-    spin_unlock_irqrestore(cmd->host->host_lock, flags);    
-    panic("eata_pio: abort: invalid slot status\n");
+	panic("eata_pio: abort: invalid slot status\n");
 }
 
-int eata_pio_reset(Scsi_Cmnd * cmd, unsigned int dummy)
+static int eata_pio_host_reset(Scsi_Cmnd * cmd)
 {
-    uint x, limit = 0;
-    ulong flags;
-    unchar success = FALSE;
-    Scsi_Cmnd *sp; 
-    
-    DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset called pid:%ld target:"
-                           " %x lun: %x reason %x\n", cmd->pid, cmd->target, 
-                           cmd->lun, cmd->abort_reason));
-
-    spin_lock_irqsave(cmd->host->host_lock, flags);    
-    if (HD(cmd)->state == RESET) {
-	printk(KERN_WARNING "eata_pio_reset: exit, already in reset.\n");
-        spin_unlock_irqrestore(cmd->host->host_lock, flags);    
-	return (SCSI_RESET_ERROR);
-    }
-    
-    /* force all slots to be free */
-    
-    for (x = 0; x < cmd->host->can_queue; x++) {
-	
-	if (HD(cmd)->ccb[x].status == FREE) 
-	    continue;
-	
-	sp = HD(cmd)->ccb[x].cmd;
-	HD(cmd)->ccb[x].status = RESET;
-	printk(KERN_WARNING "eata_pio_reset: slot %d in reset, pid %ld.\n", x,
-               sp->pid);
-	
-	if (sp == NULL)
-	    panic("eata_pio_reset: slot %d, sp==NULL.\n", x);
-    }
-    
-    /* hard reset the HBA  */
-    outb(EATA_CMD_RESET, (uint) cmd->host->base+HA_WCOMMAND);
-    
-    DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: board reset done.\n"));
-    HD(cmd)->state = RESET;
-    
-    set_current_state(TASK_UNINTERRUPTIBLE);
-    schedule_timeout(3*HZ);    	
-    
-    DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: interrupts disabled, "
-                           "loops %d.\n", limit));
-    
-    for (x = 0; x < cmd->host->can_queue; x++) {
-	
-	/* Skip slots already set free by interrupt */
-	if (HD(cmd)->ccb[x].status != RESET)
-	    continue;
-	
-	sp = HD(cmd)->ccb[x].cmd;
-	sp->result = DID_RESET << 16;
-	
-	/* This mailbox is terminated */
-	printk(KERN_WARNING "eata_pio_reset: reset ccb %d.\n",x);
-	HD(cmd)->ccb[x].status = FREE;
-	
-	sp->scsi_done(sp);
-    }
-    
-    HD(cmd)->state = FALSE;
-    spin_unlock_irqrestore(cmd->host->host_lock, flags);    
-    
-    if (success) { /* hmmm... */
-	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, success.\n"));
-	return (SCSI_RESET_SUCCESS);
-    } else {
-	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, wakeup.\n"));
-	return (SCSI_RESET_PUNT);
-    }
+	uint x, limit = 0;
+	unsigned char success = FALSE;
+	Scsi_Cmnd *sp;
+	struct Scsi_Host *host = cmd->host;
+
+	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset called pid:%ld target:" " %x lun: %x reason %x\n", cmd->pid, cmd->target, cmd->lun, cmd->abort_reason));
+
+	if (HD(cmd)->state == RESET) {
+		printk(KERN_WARNING "eata_pio_reset: exit, already in reset.\n");
+		return FAILED;
+	}
+
+	/* force all slots to be free */
+
+	for (x = 0; x < cmd->host->can_queue; x++) {
+
+		if (HD(cmd)->ccb[x].status == FREE)
+			continue;
+
+		sp = HD(cmd)->ccb[x].cmd;
+		HD(cmd)->ccb[x].status = RESET;
+		printk(KERN_WARNING "eata_pio_reset: slot %d in reset, pid %ld.\n", x, sp->pid);
+
+		if (sp == NULL)
+			panic("eata_pio_reset: slot %d, sp==NULL.\n", x);
+	}
+
+	/* hard reset the HBA  */
+	outb(EATA_CMD_RESET, (uint) cmd->host->base + HA_WCOMMAND);
+
+	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: board reset done.\n"));
+	HD(cmd)->state = RESET;
+
+	spin_unlock_irq(host->host_lock);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(3 * HZ);
+	spin_lock_irq(host->host_lock);
+
+	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: interrupts disabled, " "loops %d.\n", limit));
+
+	for (x = 0; x < cmd->host->can_queue; x++) {
+
+		/* Skip slots already set free by interrupt */
+		if (HD(cmd)->ccb[x].status != RESET)
+			continue;
+
+		sp = HD(cmd)->ccb[x].cmd;
+		sp->result = DID_RESET << 16;
+
+		/* This mailbox is terminated */
+		printk(KERN_WARNING "eata_pio_reset: reset ccb %d.\n", x);
+		HD(cmd)->ccb[x].status = FREE;
+
+		sp->scsi_done(sp);
+	}
+
+	HD(cmd)->state = FALSE;
+
+	if (success) {		/* hmmm... */
+		DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, success.\n"));
+		return SUCCESS;
+	} else {
+		DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, wakeup.\n"));
+		return FAILED;
+	}
 }
 
-char * get_pio_board_data(ulong base, uint irq, uint id, ulong cplen, ushort cppadlen)
+static char *get_pio_board_data(unsigned long base, uint irq, uint id, unsigned long cplen, unsigned short cppadlen)
 {
-    struct eata_ccb cp;
-    static char buff[256];
-    int z;
-    
-    memset(&cp, 0, sizeof(struct eata_ccb));
-    memset(buff, 0, sizeof(buff));
-    
-    cp.DataIn = TRUE;     
-    cp.Interpret = TRUE;   /* Interpret command */
-    
-    cp.cp_datalen = htonl(254);  
-    cp.cp_dataDMA = htonl(0);
-    
-    cp.cp_id = id;
-    cp.cp_lun = 0;
-    
-    cp.cp_cdb[0] = INQUIRY;
-    cp.cp_cdb[1] = 0;
-    cp.cp_cdb[2] = 0;
-    cp.cp_cdb[3] = 0;
-    cp.cp_cdb[4] = 254;
-    cp.cp_cdb[5] = 0;
-    
-    if (eata_pio_send_command((uint) base, EATA_CMD_PIO_SEND_CP)) 
-        return (NULL);
-    while (!(inb(base + HA_RSTATUS) & HA_SDRQ));
-    outsw(base + HA_RDATA, &cp, cplen);
-    outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
-    for (z = 0; z < cppadlen; z++) outw(0, base + HA_RDATA);
-    
-    while (inb(base + HA_RSTATUS) & HA_SBUSY);
-    if (inb(base + HA_RSTATUS) & HA_SERROR)
-	return (NULL);
-    else if (!(inb(base + HA_RSTATUS) & HA_SDRQ))
-	return (NULL);
-    else
-    {
-	insw(base+HA_RDATA, &buff, 127);
-	while (inb(base + HA_RSTATUS)&HA_SDRQ) inw(base + HA_RDATA);
-	return (buff);
-    }
+	struct eata_ccb cp;
+	static char buff[256];
+	int z;
+
+	memset(&cp, 0, sizeof(struct eata_ccb));
+	memset(buff, 0, sizeof(buff));
+
+	cp.DataIn = TRUE;
+	cp.Interpret = TRUE;	/* Interpret command */
+
+	cp.cp_datalen = htonl(254);
+	cp.cp_dataDMA = htonl(0);
+
+	cp.cp_id = id;
+	cp.cp_lun = 0;
+
+	cp.cp_cdb[0] = INQUIRY;
+	cp.cp_cdb[1] = 0;
+	cp.cp_cdb[2] = 0;
+	cp.cp_cdb[3] = 0;
+	cp.cp_cdb[4] = 254;
+	cp.cp_cdb[5] = 0;
+
+	if (eata_pio_send_command((uint) base, EATA_CMD_PIO_SEND_CP))
+		return (NULL);
+	while (!(inb(base + HA_RSTATUS) & HA_SDRQ));
+	outsw(base + HA_RDATA, &cp, cplen);
+	outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
+	for (z = 0; z < cppadlen; z++)
+		outw(0, base + HA_RDATA);
+
+	while (inb(base + HA_RSTATUS) & HA_SBUSY);
+	if (inb(base + HA_RSTATUS) & HA_SERROR)
+		return (NULL);
+	else if (!(inb(base + HA_RSTATUS) & HA_SDRQ))
+		return (NULL);
+	else {
+		insw(base + HA_RDATA, &buff, 127);
+		while (inb(base + HA_RSTATUS) & HA_SDRQ)
+			inw(base + HA_RDATA);
+		return (buff);
+	}
 }
 
-int get_pio_conf_PIO(u32 base, struct get_conf *buf)
+static int get_pio_conf_PIO(u32 base, struct get_conf *buf)
 {
-    ulong loop = HZ/2;
-    int z;
-    ushort *p;
-    
-    if(check_region(base, 9))  
-	return (FALSE);
-    
-    memset(buf, 0, sizeof(struct get_conf));
-    
-    while (inb(base + HA_RSTATUS) & HA_SBUSY)
-	if (--loop == 0) 
-	    return (FALSE);
-    
-    DBG(DBG_PIO && DBG_PROBE,
-	printk(KERN_DEBUG "Issuing PIO READ CONFIG to HBA at %#x\n", base));
-    eata_pio_send_command(base, EATA_CMD_PIO_READ_CONFIG);
-
-    loop = HZ/2;
-    for (p = (ushort *) buf; 
-	 (long)p <= ((long)buf + (sizeof(struct get_conf) / 2)); p++) {
-	while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
-	    if (--loop == 0)
+	unsigned long loop = HZ / 2;
+	int z;
+	unsigned short *p;
+
+	if (check_region(base, 9))
 		return (FALSE);
 
-	loop = HZ/2;
-	*p = inw(base + HA_RDATA);
-    }
-    if (!(inb(base + HA_RSTATUS) & HA_SERROR)) {            /* Error ? */
-	if (htonl(EATA_SIGNATURE) == buf->signature) {
-	    DBG(DBG_PIO&&DBG_PROBE, printk(KERN_NOTICE "EATA Controller found "
-                                           "at %#4x EATA Level: %x\n", base, 
-					   (uint) (buf->version)));
-	    
-	    while (inb(base + HA_RSTATUS) & HA_SDRQ) 
-		inw(base + HA_RDATA);
-	    if(ALLOW_DMA_BOARDS == FALSE) {
-		for (z = 0; z < MAXISA; z++)
-		    if (base == ISAbases[z]) {
-			buf->IRQ = ISAirqs[z]; 
-			break;
-		    }
-	    }
-	    return (TRUE);
-	} 
-    } else {
-	DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during transfer "
-			      "for HBA at %x\n", base));
-    }
-    return (FALSE);
+	memset(buf, 0, sizeof(struct get_conf));
+
+	while (inb(base + HA_RSTATUS) & HA_SBUSY)
+		if (--loop == 0)
+			return (FALSE);
+
+	DBG(DBG_PIO && DBG_PROBE, printk(KERN_DEBUG "Issuing PIO READ CONFIG to HBA at %#x\n", base));
+	eata_pio_send_command(base, EATA_CMD_PIO_READ_CONFIG);
+
+	loop = HZ / 2;
+	for (p = (unsigned short *) buf; (long) p <= ((long) buf + (sizeof(struct get_conf) / 2)); p++) {
+		while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
+			if (--loop == 0)
+				return (FALSE);
+
+		loop = HZ / 2;
+		*p = inw(base + HA_RDATA);
+	}
+	if (!(inb(base + HA_RSTATUS) & HA_SERROR)) {	/* Error ? */
+		if (htonl(EATA_SIGNATURE) == buf->signature) {
+			DBG(DBG_PIO && DBG_PROBE, printk(KERN_NOTICE "EATA Controller found " "at %#4x EATA Level: %x\n", base, (uint) (buf->version)));
+
+			while (inb(base + HA_RSTATUS) & HA_SDRQ)
+				inw(base + HA_RDATA);
+			if (ALLOW_DMA_BOARDS == FALSE) {
+				for (z = 0; z < MAXISA; z++)
+					if (base == ISAbases[z]) {
+						buf->IRQ = ISAirqs[z];
+						break;
+					}
+			}
+			return (TRUE);
+		}
+	} else {
+		DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during transfer " "for HBA at %x\n", base));
+	}
+	return (FALSE);
 }
 
-void print_pio_config(struct get_conf *gc)
+static void print_pio_config(struct get_conf *gc)
 {
-    printk("Please check values: (read config data)\n");
-    printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n",
-	   (uint) ntohl(gc->len), gc->version,
-	   gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support);
-    printk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n",
-	   gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2],
-	   gc->scsi_id[1], ntohs(gc->queuesiz), ntohs(gc->SGsiz), gc->SECOND);
-    printk("IRQ:%d IRQT:%d FORCADR:%d MCH:%d RIDQ:%d\n",
-	   gc->IRQ, gc->IRQ_TR, gc->FORCADR, 
-	   gc->MAX_CHAN, gc->ID_qest);
+	printk("Please check values: (read config data)\n");
+	printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n", (uint) ntohl(gc->len), gc->version, gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support);
+	printk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n", gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2], gc->scsi_id[1], ntohs(gc->queuesiz), ntohs(gc->SGsiz), gc->SECOND);
+	printk("IRQ:%d IRQT:%d FORCADR:%d MCH:%d RIDQ:%d\n", gc->IRQ, gc->IRQ_TR, gc->FORCADR, gc->MAX_CHAN, gc->ID_qest);
 }
 
 static uint print_selftest(uint base)
 {
-    unchar buffer[512];
+	unsigned char buffer[512];
 #ifdef VERBOSE_SETUP
-    int z;
+	int z;
 #endif
-    
-    printk("eata_pio: executing controller self test & setup...\n");
-    while (inb(base + HA_RSTATUS) & HA_SBUSY);
-    outb(EATA_CMD_PIO_SETUPTEST, base + HA_WCOMMAND);
-    do {
-	while (inb(base + HA_RSTATUS) & HA_SBUSY)
-	    /* nothing */ ;
-	if (inb(base + HA_RSTATUS) & HA_SDRQ)
-	{
-	    insw(base + HA_RDATA, &buffer, 256);
+
+	printk("eata_pio: executing controller self test & setup...\n");
+	while (inb(base + HA_RSTATUS) & HA_SBUSY);
+	outb(EATA_CMD_PIO_SETUPTEST, base + HA_WCOMMAND);
+	do {
+		while (inb(base + HA_RSTATUS) & HA_SBUSY)
+			/* nothing */ ;
+		if (inb(base + HA_RSTATUS) & HA_SDRQ) {
+			insw(base + HA_RDATA, &buffer, 256);
 #ifdef VERBOSE_SETUP
-	    /* no beeps please... */
-	    for (z = 0; z < 511 && buffer[z]; z++)
-		if (buffer[z] != 7) printk("%c", buffer[z]);
+			/* no beeps please... */
+			for (z = 0; z < 511 && buffer[z]; z++)
+				if (buffer[z] != 7)
+					printk("%c", buffer[z]);
 #endif
-	}
-    } while (inb(base+HA_RSTATUS) & (HA_SBUSY|HA_SDRQ));
-    
-    return (!(inb(base+HA_RSTATUS) & HA_SERROR)); 
+		}
+	} while (inb(base + HA_RSTATUS) & (HA_SBUSY | HA_SDRQ));
+
+	return (!(inb(base + HA_RSTATUS) & HA_SERROR));
 }
 
-int register_pio_HBA(long base, struct get_conf *gc, Scsi_Host_Template * tpnt)
+static int register_pio_HBA(long base, struct get_conf *gc, Scsi_Host_Template * tpnt)
 {
-    ulong size = 0;
-    char *buff;
-    ulong cplen;
-    ushort cppadlen;
-    struct Scsi_Host *sh;
-    hostdata *hd;
-    
-    DBG(DBG_REGISTER, print_pio_config(gc));
-    
-    if (gc->DMA_support == TRUE) {
-	printk("HBA at %#.4lx supports DMA. Please use EATA-DMA driver.\n",base);
-	if(ALLOW_DMA_BOARDS == FALSE)
-	    return (FALSE);
-    }
-    
-    if ((buff = get_pio_board_data((uint)base, gc->IRQ, gc->scsi_id[3], 
-			       cplen   =(htonl(gc->cplen   )+1)/2, 
-			       cppadlen=(htons(gc->cppadlen)+1)/2)) == NULL)
-    {
-	printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", (ulong) base);
-	return (FALSE);
-    }
-    
-    if (print_selftest(base) == FALSE && ALLOW_DMA_BOARDS == FALSE)
-    {
-	printk("HBA at %#lx failed while performing self test & setup.\n", 
-	       (ulong) base);
-	return (FALSE);
-    }
-    
-    request_region(base, 8, "eata_pio");
-    
-    size = sizeof(hostdata) + (sizeof(struct eata_ccb) * ntohs(gc->queuesiz));
-    
-    sh = scsi_register(tpnt, size);
-    if(sh == NULL)
-    {
-    	release_region(base, 8);
-    	return FALSE;
-    }
-    
-    if (!reg_IRQ[gc->IRQ]) {    /* Interrupt already registered ? */
-	if (!request_irq(gc->IRQ, do_eata_pio_int_handler, SA_INTERRUPT, 
-			 "EATA-PIO", sh)){
-	    reg_IRQ[gc->IRQ]++;
-	    if (!gc->IRQ_TR)
-		reg_IRQL[gc->IRQ] = TRUE;   /* IRQ is edge triggered */
+	unsigned long size = 0;
+	char *buff;
+	unsigned long cplen;
+	unsigned short cppadlen;
+	struct Scsi_Host *sh;
+	hostdata *hd;
+
+	DBG(DBG_REGISTER, print_pio_config(gc));
+
+	if (gc->DMA_support == TRUE) {
+		printk("HBA at %#.4lx supports DMA. Please use EATA-DMA driver.\n", base);
+		if (ALLOW_DMA_BOARDS == FALSE)
+			return (FALSE);
+	}
+
+	if ((buff = get_pio_board_data((uint) base, gc->IRQ, gc->scsi_id[3], cplen = (htonl(gc->cplen) + 1) / 2, cppadlen = (htons(gc->cppadlen) + 1) / 2)) == NULL) {
+		printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", (unsigned long) base);
+		return (FALSE);
+	}
+
+	if (print_selftest(base) == FALSE && ALLOW_DMA_BOARDS == FALSE) {
+		printk("HBA at %#lx failed while performing self test & setup.\n", (unsigned long) base);
+		return (FALSE);
+	}
+
+	request_region(base, 8, "eata_pio");
+
+	size = sizeof(hostdata) + (sizeof(struct eata_ccb) * ntohs(gc->queuesiz));
+
+	sh = scsi_register(tpnt, size);
+	if (sh == NULL) {
+		release_region(base, 8);
+		return FALSE;
+	}
+
+	if (!reg_IRQ[gc->IRQ]) {	/* Interrupt already registered ? */
+		if (!request_irq(gc->IRQ, do_eata_pio_int_handler, SA_INTERRUPT, "EATA-PIO", sh)) {
+			reg_IRQ[gc->IRQ]++;
+			if (!gc->IRQ_TR)
+				reg_IRQL[gc->IRQ] = TRUE;	/* IRQ is edge triggered */
+		} else {
+			printk("Couldn't allocate IRQ %d, Sorry.\n", gc->IRQ);
+			release_region(base, 8);
+			return (FALSE);
+		}
+	} else {		/* More than one HBA on this IRQ */
+		if (reg_IRQL[gc->IRQ] == TRUE) {
+			printk("Can't support more than one HBA on this IRQ,\n" "  if the IRQ is edge triggered. Sorry.\n");
+			release_region(base, 8);
+			return (FALSE);
+		} else
+			reg_IRQ[gc->IRQ]++;
+	}
+
+	hd = SD(sh);
+
+	memset(hd->ccb, 0, (sizeof(struct eata_ccb) * ntohs(gc->queuesiz)));
+	memset(hd->reads, 0, sizeof(unsigned long) * 26);
+
+	strncpy(SD(sh)->vendor, &buff[8], 8);
+	SD(sh)->vendor[8] = 0;
+	strncpy(SD(sh)->name, &buff[16], 17);
+	SD(sh)->name[17] = 0;
+	SD(sh)->revision[0] = buff[32];
+	SD(sh)->revision[1] = buff[33];
+	SD(sh)->revision[2] = buff[34];
+	SD(sh)->revision[3] = '.';
+	SD(sh)->revision[4] = buff[35];
+	SD(sh)->revision[5] = 0;
+
+	switch (ntohl(gc->len)) {
+	case 0x1c:
+		SD(sh)->EATA_revision = 'a';
+		break;
+	case 0x1e:
+		SD(sh)->EATA_revision = 'b';
+		break;
+	case 0x22:
+		SD(sh)->EATA_revision = 'c';
+		break;
+	case 0x24:
+		SD(sh)->EATA_revision = 'z';
+	default:
+		SD(sh)->EATA_revision = '?';
+	}
+
+	if (ntohl(gc->len) >= 0x22) {
+		if (gc->is_PCI == TRUE)
+			hd->bustype = IS_PCI;
+		else if (gc->is_EISA == TRUE)
+			hd->bustype = IS_EISA;
+		else
+			hd->bustype = IS_ISA;
 	} else {
-	    printk("Couldn't allocate IRQ %d, Sorry.\n", gc->IRQ);
-	    release_region(base, 8);
-	    return (FALSE);
+		if (buff[21] == '4')
+			hd->bustype = IS_PCI;
+		else if (buff[21] == '2')
+			hd->bustype = IS_EISA;
+		else
+			hd->bustype = IS_ISA;
 	}
-    } else {            /* More than one HBA on this IRQ */
-	if (reg_IRQL[gc->IRQ] == TRUE) {
-	    printk("Can't support more than one HBA on this IRQ,\n"
-		   "  if the IRQ is edge triggered. Sorry.\n");
-	    release_region(base, 8);
-	    return (FALSE);
-	} else
-	    reg_IRQ[gc->IRQ]++;
-    }
-    
-    hd = SD(sh);                   
-    
-    memset(hd->ccb, 0, (sizeof(struct eata_ccb) * ntohs(gc->queuesiz)));
-    memset(hd->reads, 0, sizeof(ulong) * 26); 
-    
-    strncpy(SD(sh)->vendor, &buff[8], 8);
-    SD(sh)->vendor[8] = 0;
-    strncpy(SD(sh)->name, &buff[16], 17);
-    SD(sh)->name[17] = 0;
-    SD(sh)->revision[0] = buff[32];
-    SD(sh)->revision[1] = buff[33];
-    SD(sh)->revision[2] = buff[34];
-    SD(sh)->revision[3] = '.';
-    SD(sh)->revision[4] = buff[35];
-    SD(sh)->revision[5] = 0;
-
-    switch (ntohl(gc->len)) {
-    case 0x1c:
-	SD(sh)->EATA_revision = 'a';
-	break;
-    case 0x1e:
-	SD(sh)->EATA_revision = 'b';
-	break;
-    case 0x22:
-	SD(sh)->EATA_revision = 'c';
-	break;
-    case 0x24:
-	SD(sh)->EATA_revision = 'z';		
-    default:
-	SD(sh)->EATA_revision = '?';
-    }
-
-    if(ntohl(gc->len) >= 0x22) {
-	if (gc->is_PCI == TRUE)
-	    hd->bustype = IS_PCI;
-	else if (gc->is_EISA == TRUE)
-	    hd->bustype = IS_EISA;
-	else
-	    hd->bustype = IS_ISA;
-    } else {
-	if (buff[21] == '4')
-	    hd->bustype = IS_PCI;
-	else if (buff[21] == '2')
-	    hd->bustype = IS_EISA;
+
+	SD(sh)->cplen = cplen;
+	SD(sh)->cppadlen = cppadlen;
+	SD(sh)->hostid = gc->scsi_id[3];
+	SD(sh)->devflags = 1 << gc->scsi_id[3];
+	SD(sh)->moresupport = gc->MORE_support;
+	sh->unique_id = base;
+	sh->base = base;
+	sh->io_port = base;
+	sh->n_io_port = 8;
+	sh->irq = gc->IRQ;
+	sh->dma_channel = PIO;
+	sh->this_id = gc->scsi_id[3];
+	sh->can_queue = 1;
+	sh->cmd_per_lun = 1;
+	sh->sg_tablesize = SG_ALL;
+
+	hd->channel = 0;
+
+	sh->max_id = 8;
+	sh->max_lun = 8;
+
+	if (gc->SECOND)
+		hd->primary = FALSE;
 	else
-	    hd->bustype = IS_ISA;
-    }
-  
-    SD(sh)->cplen=cplen;
-    SD(sh)->cppadlen=cppadlen;
-    SD(sh)->hostid=gc->scsi_id[3];
-    SD(sh)->devflags=1<<gc->scsi_id[3];
-    SD(sh)->moresupport=gc->MORE_support;
-    sh->unique_id = base;
-    sh->base = base;
-    sh->io_port = base;
-    sh->n_io_port = 8;
-    sh->irq = gc->IRQ;
-    sh->dma_channel = PIO;
-    sh->this_id = gc->scsi_id[3];
-    sh->can_queue = 1;
-    sh->cmd_per_lun = 1;
-    sh->sg_tablesize = SG_ALL;
-    
-    hd->channel = 0;
-    
-    sh->max_id = 8;
-    sh->max_lun = 8;
-
-    if (gc->SECOND)
-	hd->primary = FALSE;
-    else
-	hd->primary = TRUE;
-    
-    sh->unchecked_isa_dma = FALSE; /* We can only do PIO */
-    
-    hd->next = NULL;    /* build a linked list of all HBAs */
-    hd->prev = last_HBA;
-    if(hd->prev != NULL)
-	SD(hd->prev)->next = sh;
-    last_HBA = sh;
-    if (first_HBA == NULL)
-	first_HBA = sh;
-    registered_HBAs++;
-    return (1);
+		hd->primary = TRUE;
+
+	sh->unchecked_isa_dma = FALSE;	/* We can only do PIO */
+
+	hd->next = NULL;	/* build a linked list of all HBAs */
+	hd->prev = last_HBA;
+	if (hd->prev != NULL)
+		SD(hd->prev)->next = sh;
+	last_HBA = sh;
+	if (first_HBA == NULL)
+		first_HBA = sh;
+	registered_HBAs++;
+	return (1);
 }
 
-void find_pio_ISA(struct get_conf *buf, Scsi_Host_Template * tpnt)
+static void find_pio_ISA(struct get_conf *buf, Scsi_Host_Template * tpnt)
 {
-    int i;
-    
-    for (i = 0; i < MAXISA; i++) {  
-	if (ISAbases[i]) {  
-	    if (get_pio_conf_PIO(ISAbases[i], buf) == TRUE){
-		register_pio_HBA(ISAbases[i], buf, tpnt);
-	    }
-	    ISAbases[i] = 0;
+	int i;
+
+	for (i = 0; i < MAXISA; i++) {
+		if (ISAbases[i]) {
+			if (get_pio_conf_PIO(ISAbases[i], buf) == TRUE) {
+				register_pio_HBA(ISAbases[i], buf, tpnt);
+			}
+			ISAbases[i] = 0;
+		}
 	}
-    }
-    return;
+	return;
 }
 
-void find_pio_EISA(struct get_conf *buf, Scsi_Host_Template * tpnt)
+static void find_pio_EISA(struct get_conf *buf, Scsi_Host_Template * tpnt)
 {
-    u32 base;
-    int i;
+	u32 base;
+	int i;
 
 #if CHECKPAL
-    u8 pal1, pal2, pal3;
+	u8 pal1, pal2, pal3;
 #endif
 
-    for (i = 0; i < MAXEISA; i++) {
-	if (EISAbases[i] == TRUE) { /* Still a possibility ?          */
+	for (i = 0; i < MAXEISA; i++) {
+		if (EISAbases[i] == TRUE) {	/* Still a possibility ?          */
 
-	    base = 0x1c88 + (i * 0x1000);
+			base = 0x1c88 + (i * 0x1000);
 #if CHECKPAL
-	    pal1 = inb((u16)base - 8);
-	    pal2 = inb((u16)base - 7);
-	    pal3 = inb((u16)base - 6);
-
-	    if (((pal1 == 0x12) && (pal2 == 0x14)) ||
-		((pal1 == 0x38) && (pal2 == 0xa3) && (pal3 == 0x82)) ||
-		((pal1 == 0x06) && (pal2 == 0x94) && (pal3 == 0x24))) {
-		DBG(DBG_PROBE, printk(KERN_NOTICE "EISA EATA id tags found: "
-                                      "%x %x %x \n",
-				      (int)pal1, (int)pal2, (int)pal3));
+			pal1 = inb((u16) base - 8);
+			pal2 = inb((u16) base - 7);
+			pal3 = inb((u16) base - 6);
+
+			if (((pal1 == 0x12) && (pal2 == 0x14)) || ((pal1 == 0x38) && (pal2 == 0xa3) && (pal3 == 0x82)) || ((pal1 == 0x06) && (pal2 == 0x94) && (pal3 == 0x24))) {
+				DBG(DBG_PROBE, printk(KERN_NOTICE "EISA EATA id tags found: " "%x %x %x \n", (int) pal1, (int) pal2, (int) pal3));
 #endif
-		if (get_pio_conf_PIO(base, buf) == TRUE) {
-		    DBG(DBG_PROBE && DBG_EISA, print_pio_config(buf));
-		    if (buf->IRQ) {
-			register_pio_HBA(base, buf, tpnt);
-		    } else
-			printk(KERN_NOTICE "eata_dma: No valid IRQ. HBA "
-                               "removed from list\n");
-		}
-		/* Nothing found here so we take it from the list */
-		EISAbases[i] = 0;
+				if (get_pio_conf_PIO(base, buf) == TRUE) {
+					DBG(DBG_PROBE && DBG_EISA, print_pio_config(buf));
+					if (buf->IRQ) {
+						register_pio_HBA(base, buf, tpnt);
+					} else
+						printk(KERN_NOTICE "eata_dma: No valid IRQ. HBA " "removed from list\n");
+				}
+				/* Nothing found here so we take it from the list */
+				EISAbases[i] = 0;
 #if CHECKPAL
-	    }
+			}
 #endif
+		}
 	}
-    }
-    return;
+	return;
 }
 
-void find_pio_PCI(struct get_conf *buf, Scsi_Host_Template * tpnt)
+static void find_pio_PCI(struct get_conf *buf, Scsi_Host_Template * tpnt)
 {
 #ifndef CONFIG_PCI
-    printk("eata_dma: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n");
+	printk("eata_dma: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n");
 #else
-    struct pci_dev *dev = NULL; 
-    u32 base, x;
-
-    while ((dev = pci_find_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, dev)) != NULL) {
-	    DBG(DBG_PROBE && DBG_PCI, 
-		printk("eata_pio: find_PCI, HBA at %s\n", dev->name));
-	    if (pci_enable_device(dev))
-	    	continue;
-	    pci_set_master(dev);
-	    base = pci_resource_flags(dev, 0);
-	    if (base & IORESOURCE_MEM) {
-		printk("eata_pio: invalid base address of device %s\n", dev->name);
-		continue;
-	    }
-	    base = pci_resource_start(dev, 0);
-            /* EISA tag there ? */
-	    if ((inb(base) == 0x12) && (inb(base + 1) == 0x14))
-		continue;   /* Jep, it's forced, so move on  */
-	    base += 0x10;   /* Now, THIS is the real address */
-	    if (base != 0x1f8) {
-		/* We didn't find it in the primary search */
-		if (get_pio_conf_PIO(base, buf) == TRUE) {
-		    if (buf->FORCADR)   /* If the address is forced */
-			continue;       /* we'll find it later      */
-		    
-		    /* OK. We made it till here, so we can go now  
-		     * and register it. We  only have to check and 
-		     * eventually remove it from the EISA and ISA list 
-		     */
-		    
-		    register_pio_HBA(base, buf, tpnt);
-		    
-		    if (base < 0x1000) {
-			for (x = 0; x < MAXISA; ++x) {
-			    if (ISAbases[x] == base) {
-				ISAbases[x] = 0;
-				break;
-			    }
+	struct pci_dev *dev = NULL;
+	u32 base, x;
+
+	while ((dev = pci_find_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, dev)) != NULL) {
+		DBG(DBG_PROBE && DBG_PCI, printk("eata_pio: find_PCI, HBA at %s\n", dev->name));
+		if (pci_enable_device(dev))
+			continue;
+		pci_set_master(dev);
+		base = pci_resource_flags(dev, 0);
+		if (base & IORESOURCE_MEM) {
+			printk("eata_pio: invalid base address of device %s\n", dev->name);
+			continue;
+		}
+		base = pci_resource_start(dev, 0);
+		/* EISA tag there ? */
+		if ((inb(base) == 0x12) && (inb(base + 1) == 0x14))
+			continue;	/* Jep, it's forced, so move on  */
+		base += 0x10;	/* Now, THIS is the real address */
+		if (base != 0x1f8) {
+			/* We didn't find it in the primary search */
+			if (get_pio_conf_PIO(base, buf) == TRUE) {
+				if (buf->FORCADR)	/* If the address is forced */
+					continue;	/* we'll find it later      */
+
+				/* OK. We made it till here, so we can go now  
+				 * and register it. We  only have to check and 
+				 * eventually remove it from the EISA and ISA list 
+				 */
+
+				register_pio_HBA(base, buf, tpnt);
+
+				if (base < 0x1000) {
+					for (x = 0; x < MAXISA; ++x) {
+						if (ISAbases[x] == base) {
+							ISAbases[x] = 0;
+							break;
+						}
+					}
+				} else if ((base & 0x0fff) == 0x0c88) {
+					x = (base >> 12) & 0x0f;
+					EISAbases[x] = 0;
+				}
 			}
-		    } else if ((base & 0x0fff) == 0x0c88) {
-			x = (base >> 12) & 0x0f;
-			EISAbases[x] = 0;
-		    }
-		} 
 #if CHECK_BLINK
-		else if (check_blink_state(base) == TRUE) {
-		    printk("eata_pio: HBA is in BLINK state.\n"
-			   "Consult your HBAs manual to correct this.\n");
-		}
+			else if (check_blink_state(base) == TRUE) {
+				printk("eata_pio: HBA is in BLINK state.\n" "Consult your HBAs manual to correct this.\n");
+			}
 #endif
-	    }
+		}
 	}
-#endif /* #ifndef CONFIG_PCI */
+#endif				/* #ifndef CONFIG_PCI */
 }
 
 
-int eata_pio_detect(Scsi_Host_Template * tpnt)
+static int eata_pio_detect(Scsi_Host_Template * tpnt)
 {
-    struct Scsi_Host *HBA_ptr;
-    struct get_conf gc;
-    int i;
-    
-    tpnt->proc_name = "eata_pio";
-
-    find_pio_PCI(&gc, tpnt);
-
-    find_pio_EISA(&gc, tpnt);
-
-    find_pio_ISA(&gc, tpnt);
-    
-    for (i = 0; i <= MAXIRQ; i++)
-	if (reg_IRQ[i])
-	    request_irq(i, do_eata_pio_int_handler, SA_INTERRUPT, "EATA-PIO", NULL);
-    
-    HBA_ptr = first_HBA;
-  
-    if (registered_HBAs != 0) {
-	printk("EATA (Extended Attachment) PIO driver version: %d.%d%s\n"
-	       "(c) 1993-95 Michael Neuffer, neuffer@goofy.zdv.uni-mainz.de\n"
-	       "            Alfred Arnold,   a.arnold@kfa-juelich.de\n"
-	       "This release only supports DASD devices (harddisks)\n",
-	       VER_MAJOR, VER_MINOR, VER_SUB);
-	
-	printk("Registered HBAs:\n");
-	printk("HBA no. Boardtype: Revis: EATA: Bus: BaseIO: IRQ: Ch: ID: Pr:"
-               " QS: SG: CPL:\n");
-	for (i = 1; i <= registered_HBAs; i++) {
-	    printk("scsi%-2d: %.10s v%s 2.0%c  %s %#.4x   %2d   %d   %d   %c"
-                   "  %2d  %2d  %2d\n", 
-		   HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision,
-		   SD(HBA_ptr)->EATA_revision, (SD(HBA_ptr)->bustype == 'P')?
-		   "PCI ":(SD(HBA_ptr)->bustype == 'E')?"EISA":"ISA ",
-		   (uint) HBA_ptr->base, HBA_ptr->irq, SD(HBA_ptr)->channel, 
-                   HBA_ptr->this_id, (SD(HBA_ptr)->primary == TRUE)?'Y':'N', 
-		   HBA_ptr->can_queue, HBA_ptr->sg_tablesize, 
-                   HBA_ptr->cmd_per_lun);
-	    HBA_ptr = SD(HBA_ptr)->next;
+	struct Scsi_Host *HBA_ptr;
+	struct get_conf gc;
+	int i;
+
+	tpnt->proc_name = "eata_pio";
+
+	find_pio_PCI(&gc, tpnt);
+
+	find_pio_EISA(&gc, tpnt);
+
+	find_pio_ISA(&gc, tpnt);
+
+	for (i = 0; i <= MAXIRQ; i++)
+		if (reg_IRQ[i])
+			request_irq(i, do_eata_pio_int_handler, SA_INTERRUPT, "EATA-PIO", NULL);
+
+	HBA_ptr = first_HBA;
+
+	if (registered_HBAs != 0) {
+		printk("EATA (Extended Attachment) PIO driver version: %d.%d%s\n"
+		       "(c) 1993-95 Michael Neuffer, neuffer@goofy.zdv.uni-mainz.de\n" "            Alfred Arnold,   a.arnold@kfa-juelich.de\n" "This release only supports DASD devices (harddisks)\n", VER_MAJOR, VER_MINOR, VER_SUB);
+
+		printk("Registered HBAs:\n");
+		printk("HBA no. Boardtype: Revis: EATA: Bus: BaseIO: IRQ: Ch: ID: Pr:" " QS: SG: CPL:\n");
+		for (i = 1; i <= registered_HBAs; i++) {
+			printk("scsi%-2d: %.10s v%s 2.0%c  %s %#.4x   %2d   %d   %d   %c"
+			       "  %2d  %2d  %2d\n",
+			       HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision,
+			       SD(HBA_ptr)->EATA_revision, (SD(HBA_ptr)->bustype == 'P') ?
+			       "PCI " : (SD(HBA_ptr)->bustype == 'E') ? "EISA" : "ISA ",
+			       (uint) HBA_ptr->base, HBA_ptr->irq, SD(HBA_ptr)->channel, HBA_ptr->this_id, (SD(HBA_ptr)->primary == TRUE) ? 'Y' : 'N', HBA_ptr->can_queue, HBA_ptr->sg_tablesize, HBA_ptr->cmd_per_lun);
+			HBA_ptr = SD(HBA_ptr)->next;
+		}
 	}
-    }
-    return (registered_HBAs);
+	return (registered_HBAs);
 }
 
 /* Eventually this will go into an include file, but this will be later */

drivers/scsi/eata_pio.h

@@ -2,7 +2,7 @@
 * Header file for eata_pio.c Linux EATA-PIO SCSI driver *
 * (c) 1993-96 Michael Neuffer  	                        *
 *********************************************************
-* last change: 96/05/05					*
+* last change: 2002/11/02				*
 ********************************************************/
 
 
@@ -14,7 +14,6 @@
 #include "hosts.h"
 #include <scsi/scsicam.h>
 
-#ifndef HOSTS_C
 #include "eata_generic.h"
 
 #define VER_MAJOR 0
@@ -25,82 +24,55 @@
  * Here you can switch parts of the code on and of			*
  ************************************************************************/
 
-#define VERBOSE_SETUP			/* show startup screen of 2001 */
+#define VERBOSE_SETUP		/* show startup screen of 2001 */
 #define ALLOW_DMA_BOARDS 1
 
 /************************************************************************
  * Debug options.							* 
  * Enable DEBUG and whichever options you require.			*
  ************************************************************************/
-#define DEBUG_EATA	1   /* Enable debug code.			*/
-#define DPT_DEBUG	0   /* Bobs special				*/
-#define DBG_DELAY	0   /* Build in delays so debug messages can be
-                             * be read before they vanish of the top of
-                             * the screen!
-                             */
-#define DBG_PROBE	0   /* Debug probe routines.			*/
-#define DBG_ISA		0   /* Trace ISA routines			*/ 
-#define DBG_EISA	0   /* Trace EISA routines			*/ 
-#define DBG_PCI		0   /* Trace PCI routines			*/ 
-#define DBG_PIO		0   /* Trace get_config_PIO			*/
-#define DBG_COM		0   /* Trace command call			*/
-#define DBG_QUEUE	0   /* Trace command queueing.			*/
-#define DBG_INTR	0   /* Trace interrupt service routine.		*/
-#define DBG_INTR2	0   /* Trace interrupt service routine.		*/
-#define DBG_PROC	0   /* Debug proc-fs related statistics		*/
+#define DEBUG_EATA	1	/* Enable debug code.                       */
+#define DPT_DEBUG	0	/* Bobs special                             */
+#define DBG_DELAY	0	/* Build in delays so debug messages can be
+				 * be read before they vanish of the top of
+				 * the screen!
+				 */
+#define DBG_PROBE	0	/* Debug probe routines.                    */
+#define DBG_ISA		0	/* Trace ISA routines                       */
+#define DBG_EISA	0	/* Trace EISA routines                      */
+#define DBG_PCI		0	/* Trace PCI routines                       */
+#define DBG_PIO		0	/* Trace get_config_PIO                     */
+#define DBG_COM		0	/* Trace command call                       */
+#define DBG_QUEUE	0	/* Trace command queueing.                  */
+#define DBG_INTR	0	/* Trace interrupt service routine.         */
+#define DBG_INTR2	0	/* Trace interrupt service routine.         */
+#define DBG_PROC	0	/* Debug proc-fs related statistics         */
 #define DBG_PROC_WRITE	0
-#define DBG_REGISTER	0   /* */
-#define DBG_ABNORM	1   /* Debug abnormal actions (reset, abort)	*/
+#define DBG_REGISTER	0	/* */
+#define DBG_ABNORM	1	/* Debug abnormal actions (reset, abort)    */
 
-#if DEBUG_EATA 
-#define DBG(x, y)   if ((x)) {y;} 
+#if DEBUG_EATA
+#define DBG(x, y)   if ((x)) {y;}
 #else
 #define DBG(x, y)
 #endif
 
-#endif /* !HOSTS_C */
+static int eata_pio_detect(Scsi_Host_Template *);
+static int eata_pio_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int eata_pio_abort(Scsi_Cmnd *);
+static int eata_pio_host_reset(Scsi_Cmnd *);
+static int eata_pio_proc_info(char *, char **, off_t, int, int, int);
+static int eata_pio_release(struct Scsi_Host *);
 
-int eata_pio_detect(Scsi_Host_Template *);
-const char *eata_pio_info(struct Scsi_Host *);
-int eata_pio_command(Scsi_Cmnd *);
-int eata_pio_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int eata_pio_abort(Scsi_Cmnd *);
-int eata_pio_reset(Scsi_Cmnd *, unsigned int);
-int eata_pio_proc_info(char *, char **, off_t, int, int, int);
-#ifdef MODULE
-int eata_pio_release(struct Scsi_Host *);
-#else
-#define eata_pio_release NULL  
-#endif
-
-
-#define EATA_PIO {						\
-    proc_info:         eata_pio_proc_info, /* procinfo	  */	\
-    name:              "EATA (Extended Attachment) PIO driver",	\
-    detect:            eata_pio_detect,				\
-    release:           eata_pio_release,			\
-    queuecommand:      eata_pio_queue,				\
-    abort:             eata_pio_abort,				\
-    reset:             eata_pio_reset,				\
-    unchecked_isa_dma: 1,	    /* True if ISA  */		\
-    use_clustering:    ENABLE_CLUSTERING }
-
-#endif /* _EATA_PIO_H */
+#define EATA_PIO {							\
+	proc_info:         	eata_pio_proc_info, /* procinfo	  */	\
+	name:              	"EATA (Extended Attachment) PIO driver",\
+	detect:            	eata_pio_detect,			\
+	release:           	eata_pio_release,			\
+	queuecommand:      	eata_pio_queue,				\
+	eh_abort_handler:  	eata_pio_abort,				\
+	eh_host_reset_handler:	eata_pio_host_reset,			\
+	use_clustering:    	ENABLE_CLUSTERING 			\
+}
 
-/*
- * Overrides for Emacs so that we almost follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * tab-width: 8
- * End:
- */
+#endif				/* _EATA_PIO_H */

drivers/scsi/fd_mcs.c

@@ -1325,118 +1325,115 @@ static int fd_mcs_host_reset(Scsi_Cmnd * SCpnt)
 	return FAILED;
 }
 
-static int fd_mcs_device_reset(Scsi_Cmnd * SCpnt) {
-		return FAILED;
-	}
+static int fd_mcs_device_reset(Scsi_Cmnd * SCpnt) 
+{
+	return FAILED;
+}
 
-	static int fd_mcs_bus_reset(Scsi_Cmnd * SCpnt) {
-		struct Scsi_Host *shpnt = SCpnt->host;
-		unsigned long flags;
+static int fd_mcs_bus_reset(Scsi_Cmnd * SCpnt) {
+	struct Scsi_Host *shpnt = SCpnt->host;
 
 #if DEBUG_RESET
-		static int called_once = 0;
+	static int called_once = 0;
 #endif
 
 #if ERRORS_ONLY
-		if (SCpnt)
-			printk("fd_mcs: SCSI Bus Reset\n");
+	if (SCpnt)
+		printk("fd_mcs: SCSI Bus Reset\n");
 #endif
 
 #if DEBUG_RESET
-		if (called_once)
-			fd_mcs_print_info(current_SC);
-		called_once = 1;
+	if (called_once)
+		fd_mcs_print_info(current_SC);
+	called_once = 1;
 #endif
 
-		spin_lock_irqsave(shpnt->host_lock, flags);
-
-		outb(1, SCSI_Cntl_port);
-		do_pause(2);
-		outb(0, SCSI_Cntl_port);
-		do_pause(115);
-		outb(0, SCSI_Mode_Cntl_port);
-		outb(PARITY_MASK, TMC_Cntl_port);
-
-		/* Unless this is the very first call (i.e., SCPnt == NULL), everything
-		   is probably hosed at this point.  We will, however, try to keep
-		   things going by informing the high-level code that we need help. */
+	outb(1, SCSI_Cntl_port);
+	do_pause(2);
+	outb(0, SCSI_Cntl_port);
+	do_pause(115);
+	outb(0, SCSI_Mode_Cntl_port);
+	outb(PARITY_MASK, TMC_Cntl_port);
 
-		spin_unlock_irqrestore(shpnt->host_lock, flags);
+	/* Unless this is the very first call (i.e., SCPnt == NULL), everything
+	   is probably hosed at this point.  We will, however, try to keep
+	   things going by informing the high-level code that we need help. */
 		return SUCCESS;
-	}
+}
 
 #include <scsi/scsi_ioctl.h>
 
-	static int fd_mcs_biosparam(Scsi_Disk * disk, struct block_device *bdev,
-				    sector_t capacity, int *info_array) {
-		unsigned char buf[512 + sizeof(int) * 2];
-		int size = capacity;
-		int *sizes = (int *) buf;
-		unsigned char *data = (unsigned char *) (sizes + 2);
-		unsigned char do_read[] = { READ_6, 0, 0, 0, 1, 0 };
-		int retcode;
-
-		/* BIOS >= 3.4 for MCA cards */
-		/* This algorithm was provided by Future Domain (much thanks!). */
-
-		sizes[0] = 0;	/* zero bytes out */
-		sizes[1] = 512;	/* one sector in */
-		memcpy(data, do_read, sizeof(do_read));
-		retcode = kernel_scsi_ioctl(disk->device, SCSI_IOCTL_SEND_COMMAND, (void *) buf);
-		if (!retcode	/* SCSI command ok */
-		    && data[511] == 0xaa && data[510] == 0x55	/* Partition table valid */
-		    && data[0x1c2]) {	/* Partition type */
-
-			/* The partition table layout is as follows:
-
-			   Start: 0x1b3h
-			   Offset: 0 = partition status
-			   1 = starting head
-			   2 = starting sector and cylinder (word, encoded)
-			   4 = partition type
-			   5 = ending head
-			   6 = ending sector and cylinder (word, encoded)
-			   8 = starting absolute sector (double word)
-			   c = number of sectors (double word)
-			   Signature: 0x1fe = 0x55aa
-
-			   So, this algorithm assumes:
-			   1) the first partition table is in use,
-			   2) the data in the first entry is correct, and
-			   3) partitions never divide cylinders
-
-			   Note that (1) may be FALSE for NetBSD (and other BSD flavors),
-			   as well as for Linux.  Note also, that Linux doesn't pay any
-			   attention to the fields that are used by this algorithm -- it
-			   only uses the absolute sector data.  Recent versions of Linux's
-			   fdisk(1) will fill this data in correctly, and forthcoming
-			   versions will check for consistency.
-
-			   Checking for a non-zero partition type is not part of the
-			   Future Domain algorithm, but it seemed to be a reasonable thing
-			   to do, especially in the Linux and BSD worlds. */
-
-			info_array[0] = data[0x1c3] + 1;	/* heads */
-			info_array[1] = data[0x1c4] & 0x3f;	/* sectors */
+static int fd_mcs_biosparam(struct scsi_device * disk, struct block_device *bdev,
+			    sector_t capacity, int *info_array) 
+{
+	unsigned char buf[512 + sizeof(int) * 2];
+	int size = capacity;
+	int *sizes = (int *) buf;
+	unsigned char *data = (unsigned char *) (sizes + 2);
+	unsigned char do_read[] = { READ_6, 0, 0, 0, 1, 0 };
+	int retcode;
+
+	/* BIOS >= 3.4 for MCA cards */
+	/* This algorithm was provided by Future Domain (much thanks!). */
+
+	sizes[0] = 0;	/* zero bytes out */
+	sizes[1] = 512;	/* one sector in */
+	memcpy(data, do_read, sizeof(do_read));
+	retcode = kernel_scsi_ioctl(disk, SCSI_IOCTL_SEND_COMMAND, (void *) buf);
+	if (!retcode	/* SCSI command ok */
+	    && data[511] == 0xaa && data[510] == 0x55	/* Partition table valid */
+	    && data[0x1c2]) {	/* Partition type */
+		/* The partition table layout is as follows:
+
+		   Start: 0x1b3h
+		   Offset: 0 = partition status
+		   1 = starting head
+		   2 = starting sector and cylinder (word, encoded)
+		   4 = partition type
+		   5 = ending head
+		   6 = ending sector and cylinder (word, encoded)
+		   8 = starting absolute sector (double word)
+		   c = number of sectors (double word)
+		   Signature: 0x1fe = 0x55aa
+
+		   So, this algorithm assumes:
+		   1) the first partition table is in use,
+		   2) the data in the first entry is correct, and
+		   3) partitions never divide cylinders
+
+		   Note that (1) may be FALSE for NetBSD (and other BSD flavors),
+		   as well as for Linux.  Note also, that Linux doesn't pay any
+		   attention to the fields that are used by this algorithm -- it
+		   only uses the absolute sector data.  Recent versions of Linux's
+		   fdisk(1) will fill this data in correctly, and forthcoming
+		   versions will check for consistency.
+
+		   Checking for a non-zero partition type is not part of the
+		   Future Domain algorithm, but it seemed to be a reasonable thing
+		   to do, especially in the Linux and BSD worlds. */
+
+		info_array[0] = data[0x1c3] + 1;	/* heads */
+		info_array[1] = data[0x1c4] & 0x3f;	/* sectors */
+	} else {
+		/* Note that this new method guarantees that there will always be
+		   less than 1024 cylinders on a platter.  This is good for drives
+		   up to approximately 7.85GB (where 1GB = 1024 * 1024 kB). */
+		if ((unsigned int) size >= 0x7e0000U) 
+		{
+			info_array[0] = 0xff;	/* heads   = 255 */
+			info_array[1] = 0x3f;	/* sectors =  63 */
+		} else if ((unsigned int) size >= 0x200000U) {
+			info_array[0] = 0x80;	/* heads   = 128 */
+			info_array[1] = 0x3f;	/* sectors =  63 */
 		} else {
-
-			/* Note that this new method guarantees that there will always be
-			   less than 1024 cylinders on a platter.  This is good for drives
-			   up to approximately 7.85GB (where 1GB = 1024 * 1024 kB). */
-
-			if ((unsigned int) size >= 0x7e0000U) {
-				info_array[0] = 0xff;	/* heads   = 255 */
-				info_array[1] = 0x3f;	/* sectors =  63 */
-			} else if ((unsigned int) size >= 0x200000U) {
-				info_array[0] = 0x80;	/* heads   = 128 */
-				info_array[1] = 0x3f;	/* sectors =  63 */
-			} else {
-				info_array[0] = 0x40;	/* heads   =  64 */
-				info_array[1] = 0x20;	/* sectors =  32 */
-			}
+			info_array[0] = 0x40;	/* heads   =  64 */
+			info_array[1] = 0x20;	/* sectors =  32 */
 		}
-		/* For both methods, compute the cylinders */
-		info_array[2] = (unsigned int) size / (info_array[0] * info_array[1]);
+	}
+	/* For both methods, compute the cylinders */
+	info_array[2] = (unsigned int) size / (info_array[0] * info_array[1]);
+	return 0;
+}
 
 /* Eventually this will go into an include file, but this will be later */
 	static Scsi_Host_Template driver_template = FD_MCS;

drivers/scsi/fd_mcs.h

@@ -30,7 +30,7 @@ static int fd_mcs_bus_reset(Scsi_Cmnd *);
 static int fd_mcs_device_reset(Scsi_Cmnd *);
 static int fd_mcs_host_reset(Scsi_Cmnd *);
 static int fd_mcs_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
-static int fd_mcs_biosparam(Disk *, struct block_device *,
+static int fd_mcs_biosparam(struct scsi_device *, struct block_device *,
 			    sector_t, int *);
 static int fd_mcs_proc_info(char *, char **, off_t, int, int, int);
 static const char *fd_mcs_info(struct Scsi_Host *);

drivers/scsi/g_NCR5380.h

@@ -54,7 +54,7 @@ static int generic_NCR5380_device_reset(Scsi_Cmnd *);
 static int notyet_generic_proc_info (char *buffer ,char **start, off_t offset,
                      int length, int hostno, int inout);
 static const char* generic_NCR5380_info(struct Scsi_Host *);
-static int generic_NCR5380_biosparam(Disk *, struct block_device *, sector_t, int *);
+static int generic_NCR5380_biosparam(struct scsi_device *, struct block_device *, sector_t, int *);
 static int generic_NCR5380_proc_info(char* buffer, char** start, off_t offset, int length, int hostno, int inout);
 
 #ifndef CMD_PER_LUN

drivers/scsi/hosts.h

@@ -192,7 +192,7 @@ typedef struct	SHT
 
     /*
      * Old EH handlers, no longer used. Make them warn the user of old
-     * drivers by using a wrogn type
+     * drivers by using a wrong type
      */
     int (*abort)(int);
     int (*reset)(int,int);

drivers/scsi/ibmmca.h

@@ -10,18 +10,14 @@
 /* Common forward declarations for all Linux-versions: */
 
 /* Interfaces to the midlevel Linux SCSI driver */
-extern int ibmmca_proc_info (char *, char **, off_t, int, int, int);
-extern int ibmmca_detect (Scsi_Host_Template *);
-extern int ibmmca_release (struct Scsi_Host *);
-extern int ibmmca_command (Scsi_Cmnd *);
-extern int ibmmca_queuecommand (Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
-extern int ibmmca_abort (Scsi_Cmnd *);
-extern int ibmmca_reset (Scsi_Cmnd *, unsigned int);
-extern int ibmmca_biosparam (struct scsi_device *, struct block_device *,
-		sector_t, int *);
-
-/*structure for /proc filesystem */
-extern struct proc_dir_entry proc_scsi_ibmmca;
+static int ibmmca_proc_info (char *, char **, off_t, int, int, int);
+static int ibmmca_detect (Scsi_Host_Template *);
+static int ibmmca_release (struct Scsi_Host *);
+static int ibmmca_command (Scsi_Cmnd *);
+static int ibmmca_queuecommand (Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int ibmmca_abort (Scsi_Cmnd *);
+static int ibmmca_host_reset (Scsi_Cmnd *);
+static int ibmmca_biosparam (struct scsi_device *, struct block_device *, sector_t, int *);
 
 /*
  * 2/8/98
@@ -37,8 +33,8 @@ extern struct proc_dir_entry proc_scsi_ibmmca;
           release:        ibmmca_release,       /*release fn*/        \
           command:        ibmmca_command,       /*command fn*/        \
           queuecommand:   ibmmca_queuecommand,  /*queuecommand fn*/   \
-          abort:          ibmmca_abort,         /*abort fn*/          \
-          reset:          ibmmca_reset,         /*reset fn*/          \
+	  eh_abort_handler:ibmmca_abort,         /*abort fn*/          \
+	  eh_host_reset_handler:ibmmca_host_reset,         /*reset fn*/          \
           bios_param:     ibmmca_biosparam,     /*bios fn*/           \
           can_queue:      16,                   /*can_queue*/         \
           this_id:        7,                    /*set by detect*/     \

drivers/scsi/pcmcia/nsp_cs.c

@@ -25,7 +25,7 @@
 
 ***********************************************************************/
 
-/* $Id: nsp_cs.c,v 1.4 2002/10/15 15:57:01 elca Exp $ */
+/* $Id: nsp_cs.c,v 1.5 2002/11/05 12:06:29 elca Exp $ */
 
 #ifdef NSP_KERNEL_2_2
 #include <pcmcia/config.h>
@@ -67,7 +67,7 @@
 #include "nsp_cs.h"
 
 MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>");
-MODULE_DESCRIPTION("WorkBit NinjaSCSI-3 / NinjaSCSI-32Bi(16bit) PCMCIA SCSI host adapter module $Revision: 1.4 $");
+MODULE_DESCRIPTION("WorkBit NinjaSCSI-3 / NinjaSCSI-32Bi(16bit) PCMCIA SCSI host adapter module $Revision: 1.5 $");
 MODULE_SUPPORTED_DEVICE("sd,sr,sg,st");
 #ifdef MODULE_LICENSE
 MODULE_LICENSE("GPL");
@@ -77,7 +77,7 @@ MODULE_LICENSE("GPL");
 static int pc_debug = PCMCIA_DEBUG;
 MODULE_PARM(pc_debug, "i");
 MODULE_PARM_DESC(pc_debug, "set debug level");
-static char *version = "$Id: nsp_cs.c,v 1.4 2002/10/15 15:57:01 elca Exp $";
+static char *version = "$Id: nsp_cs.c,v 1.5 2002/11/05 12:06:29 elca Exp $";
 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
 #else
 #define DEBUG(n, args...) /* */
@@ -129,39 +129,30 @@ MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0
 
 /* /usr/src/linux/drivers/scsi/hosts.h */
 static Scsi_Host_Template driver_template = {
-/*	.next			 = NULL,*/
 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0))
 	.proc_name	         = "nsp_cs",      /* kernel 2.4 */
 #else
 	.proc_dir	         = &proc_scsi_nsp, /* kernel 2.2 */
 #endif
 	.proc_info		 = nsp_proc_info,
-	.name			 = "WorkBit NinjaSCSI-3/32Bi",
+	.name			 = "WorkBit NinjaSCSI-3/32Bi(16bit)",
 	.detect			 = nsp_detect,
 	.release		 = nsp_release,
 	.info			 = nsp_info,
-/*	.command		 = NULL,*/
 	.queuecommand		 = nsp_queuecommand,
 /*	.eh_strategy_handler	 = nsp_eh_strategy,*/
 /*	.eh_abort_handler	 = nsp_eh_abort,*/
 /*	.eh_device_reset_handler = nsp_eh_device_reset,*/
 	.eh_bus_reset_handler	 = nsp_eh_bus_reset,
 	.eh_host_reset_handler	 = nsp_eh_host_reset,
-	.abort			 = nsp_abort,
-	.reset			 = nsp_reset,
-/*	.slave_attach		 = NULL,*/
-/*	.bios_param		 = NULL,*/
 	.can_queue		 = 1,
 	.this_id		 = NSP_INITIATOR_ID,
 	.sg_tablesize		 = SG_ALL,
 	.cmd_per_lun		 = 1,
-/*	.present		 = 0,*/
-/*	.unchecked_isa_dma	 = 0,*/
 	.use_clustering		 = DISABLE_CLUSTERING,
 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,2))
 	.use_new_eh_code	 = 1,
 #endif
-/*	.emulated		 = 0,*/
 };
 
 static dev_link_t *dev_list = NULL;
@@ -180,12 +171,12 @@ static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 #endif
 	nsp_hw_data *data = &nsp_data;
 
-	DEBUG(0, "%s() SCpnt=0x%p target=%d lun=%d buff=0x%p bufflen=%d use_sg=%d\n",
-	      __FUNCTION__,  SCpnt, target, SCpnt->lun, SCpnt->request_buffer, SCpnt->request_bufflen, SCpnt->use_sg);
+	DEBUG(0, "%s: SCpnt=0x%p target=%d lun=%d buff=0x%p bufflen=%d use_sg=%d\n",
+	      __FUNCTION__, SCpnt, target, SCpnt->lun, SCpnt->request_buffer, SCpnt->request_bufflen, SCpnt->use_sg);
 	//DEBUG(0, " before CurrentSC=0x%p\n", data->CurrentSC);
 
 	if(data->CurrentSC != NULL) {
-		printk(KERN_DEBUG " %s() CurrentSC!=NULL cannot happen!\n", __FUNCTION__);
+		printk(KERN_DEBUG " %s: CurrentSC!=NULL this can't be happen\n", __FUNCTION__);
 		data->CurrentSC = NULL;
 		SCpnt->result   = DID_BAD_TARGET << 16;
 		done(SCpnt);
@@ -231,7 +222,7 @@ static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 	}
 
 
-	//DEBUG(0, __func__ "() out\n");
+	//DEBUG(0, "%s: out\n", __FUNCTION__);
 	return 0;
 }
 
@@ -243,7 +234,7 @@ static void nsp_setup_fifo(nsp_hw_data *data, int enabled)
 	unsigned int  base = data->BaseAddress;
 	unsigned char transfer_mode_reg;
 
-	//DEBUG(0, __func__ "() enabled=%d\n", enabled);
+	//DEBUG(0, "%s: enabled=%d\n", __FUNCTION__, enabled);
 
 	if (enabled != FALSE) {
 		transfer_mode_reg = TRANSFER_GO | BRAIND;
@@ -265,7 +256,7 @@ static void nsphw_init_sync(nsp_hw_data *data)
 	int i;
 
 	/* setup sync data */
-	for ( i = 0; i < N_TARGET; i++ ) {
+	for ( i = 0; i < NUMBER(data->Sync); i++ ) {
 		data->Sync[i] = tmp_sync;
 	}
 }
@@ -277,7 +268,7 @@ static int nsphw_init(nsp_hw_data *data)
 {
 	unsigned int base     = data->BaseAddress;
 
-	DEBUG(0, "%s() in base=0x%x\n", __FUNCTION__, base);
+	DEBUG(0, "%s: in base=0x%x\n", __FUNCTION__, base);
 
 	data->ScsiClockDiv = CLOCK_40M | FAST_20;
 	data->CurrentSC    = NULL;
@@ -340,7 +331,7 @@ static unsigned int nsphw_start_selection(Scsi_Cmnd   *SCpnt,
 	int	      time_out;
 	unsigned char phase, arbit;
 
-	//DEBUG(0, __func__ "()in\n");
+	//DEBUG(0, "%s:in\n", __FUNCTION__);
 
 	phase = nsp_index_read(base, SCSIBUSMON);
 	if(phase != BUSMON_BUS_FREE) {
@@ -422,7 +413,7 @@ static int nsp_msg(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 	int		       i;
 
 
-	DEBUG(0, "%s()\n", __FUNCTION__);
+	DEBUG(0, "%s:\n", __FUNCTION__);
 
 	period = sync->SyncPeriod;
 	offset = sync->SyncOffset;
@@ -473,7 +464,7 @@ static void nsp_start_timer(Scsi_Cmnd *SCpnt, nsp_hw_data *data, int time)
 {
 	unsigned int base = SCpnt->host->io_port;
 
-	//DEBUG(0, __func__ "() in SCpnt=0x%p, time=%d\n", SCpnt, time);
+	//DEBUG(0, "%s: in SCpnt=0x%p, time=%d\n", __FUNCTION__, SCpnt, time);
 	data->TimerCount = time;
 	nsp_index_write(base, TIMERCOUNT, time);
 }
@@ -487,7 +478,7 @@ static int nsp_negate_signal(Scsi_Cmnd *SCpnt, unsigned char mask, char *str)
 	unsigned char reg;
 	int	      time_out;
 
-	//DEBUG(0, __func__ "()\n");
+	//DEBUG(0, "%s:\n", __FUNCTION__);
 
 	time_out = 100;
 
@@ -499,7 +490,7 @@ static int nsp_negate_signal(Scsi_Cmnd *SCpnt, unsigned char mask, char *str)
 	} while ((time_out-- != 0) && (reg & mask) != 0);
 
 	if (time_out == 0) {
-		printk(KERN_DEBUG "%s: %s signal off timeut\n", __FUNCTION__, str);
+		printk(KERN_DEBUG "%s:: %s signal off timeut\n", __FUNCTION__, str);
 	}
 
 	return 0;
@@ -516,7 +507,7 @@ static int nsp_expect_signal(Scsi_Cmnd	   *SCpnt,
 	int	      time_out;
 	unsigned char phase, i_src;
 
-	//DEBUG(0, __func__ "() current_phase=0x%x, mask=0x%x\n", current_phase, mask);
+	//DEBUG(0, "%s: current_phase=0x%x, mask=0x%x\n", __FUNCTION__, current_phase, mask);
 
 	time_out = 100;
 	do {
@@ -536,7 +527,7 @@ static int nsp_expect_signal(Scsi_Cmnd	   *SCpnt,
 		}
 	} while(time_out-- != 0);
 
-	//DEBUG(0, __func__ " : " __func__ " timeout\n");
+	//DEBUG(0, "%s: timeout\n", __FUNCTION__);
 	return -1;
 }
 
@@ -551,7 +542,7 @@ static int nsp_xfer(Scsi_Cmnd *SCpnt, nsp_hw_data *data, int phase)
 	int	      ptr;
 	int	      ret;
 
-	//DEBUG(0, __func__ "()\n");
+	//DEBUG(0, "%s:\n", __FUNCTION__);
 	for (ptr = 0; len > 0; len --, ptr ++) {
 
 		ret = nsp_expect_signal(SCpnt, phase, BUSMON_REQ);
@@ -586,7 +577,7 @@ static int nsp_dataphase_bypass(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 {
 	unsigned int count;
 
-	//DEBUG(0, __func__ "()\n");
+	//DEBUG(0, "%s:\n", __FUNCTION__);
 
 	if (SCpnt->SCp.have_data_in != IO_IN) {
 		return 0;
@@ -618,7 +609,7 @@ static int nsp_reselected(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 	unsigned int  base = SCpnt->host->io_port;
 	unsigned char reg;
 
-	//DEBUG(0, __func__ "()\n");
+	//DEBUG(0, "%s:\n", __FUNCTION__);
 
 	nsp_negate_signal(SCpnt, BUSMON_SEL, "reselect<SEL>");
 
@@ -648,7 +639,7 @@ static int nsp_fifo_count(Scsi_Cmnd *SCpnt)
 
 	count = (h << 16) | (m << 8) | (l << 0);
 
-	//DEBUG(0, __func__ "() =0x%x\n", count);
+	//DEBUG(0, "%s: =0x%x\n", __FUNCTION__, count);
 
 	return count;
 }
@@ -670,8 +661,8 @@ static void nsp_pio_read(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 
 	ocount = data->FifoCount;
 
-	DEBUG(0, "%s() in SCpnt=0x%p resid=%d ocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d\n", 
-		__FUNCTION__, SCpnt, RESID, ocount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual);
+	DEBUG(0, "%s: in SCpnt=0x%p resid=%d ocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d\n",
+	      __FUNCTION__, SCpnt, RESID, ocount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual);
 
 	time_out = 1000;
 
@@ -744,8 +735,8 @@ static void nsp_pio_read(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 	data->FifoCount = ocount;
 
 	if (time_out == 0) {
-		printk(KERN_DEBUG "%s() pio read timeout resid=%d this_residual=%d buffers_residual=%d\n", 
-			__FUNCTION__, RESID, SCpnt->SCp.this_residual, SCpnt->SCp.buffers_residual);
+		printk(KERN_DEBUG "%s: pio read timeout resid=%d this_residual=%d buffers_residual=%d\n",
+		       __FUNCTION__, RESID, SCpnt->SCp.this_residual, SCpnt->SCp.buffers_residual);
 	}
 	DEBUG(0, " read ocount=0x%x\n", ocount);
 }
@@ -763,7 +754,8 @@ static void nsp_pio_write(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 
 	ocount	 = data->FifoCount;
 
-	DEBUG(0,  "%s() in fifocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d resid=0x%x\n", __FUNCTION__, data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual, RESID);
+	DEBUG(0, "%s: in fifocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d resid=0x%x\n",
+	      __FUNCTION__, data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual, RESID);
 
 	time_out = 1000;
 
@@ -833,7 +825,7 @@ static void nsp_pio_write(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 	data->FifoCount = ocount;
 
 	if (time_out == 0) {
-		printk(KERN_DEBUG "%s() pio write timeout resid=0x%x\n", __FUNCTION__, RESID);
+		printk(KERN_DEBUG "%s: pio write timeout resid=0x%x\n", __FUNCTION__, RESID);
 	}
 	DEBUG(0, " write ocount=0x%x\n", ocount);
 }
@@ -851,7 +843,7 @@ static int nsp_nexus(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 //	unsigned char  lun    = SCpnt->lun;
 	sync_data     *sync   = &(data->Sync[target]);
 
-	//DEBUG(0, __func__ "() in SCpnt=0x%p\n", SCpnt);
+	//DEBUG(0, "%s: in SCpnt=0x%p\n", __FUNCTION__, SCpnt);
 
 	/* setup synch transfer registers */
 	nsp_index_write(base, SYNCREG,	sync->SyncRegister);
@@ -948,7 +940,7 @@ static void nspintr(int irq, void *dev_id, struct pt_regs *regs)
 	nsp_write(base, IRQCONTROL, IRQCONTROL_TIMER_CLEAR | IRQCONTROL_FIFO_CLEAR);
 
 	if (data->CurrentSC == NULL) {
-		printk(KERN_DEBUG "%s: CurrentSC==NULL irq_status=0x%x phase=0x%x irq_phase=0x%x cannot happen\n", __FUNCTION__, i_src, phase, irq_phase);
+		printk(KERN_DEBUG "%s: CurrentSC==NULL irq_status=0x%x phase=0x%x irq_phase=0x%x this can't be happen\n", __FUNCTION__, i_src, phase, irq_phase);
 		return;
 	} else {
 		tmpSC    = data->CurrentSC;
@@ -962,7 +954,7 @@ static void nspintr(int irq, void *dev_id, struct pt_regs *regs)
 	 */
 	if ((i_src & IRQSTATUS_SCSI) != 0) {
 		if ((irq_phase & SCSI_RESET_IRQ) != 0) {
-			printk(KERN_DEBUG " %s() bus reset (power off?)\n", __FUNCTION__);
+			printk(KERN_DEBUG " %s: bus reset (power off?)\n", __FUNCTION__);
 			*sync_neg          = SYNC_NOT_YET;
 			data->CurrentSC    = NULL;
 			tmpSC->result	   = (DID_RESET                   << 16) |
@@ -1064,7 +1056,7 @@ static void nspintr(int irq, void *dev_id, struct pt_regs *regs)
 
 	/* check unexpected bus free state */
 	if (phase == 0) {
-		printk(KERN_DEBUG "%s: unexpected bus free. i_src=0x%x, phase=0x%x, irq_phase=0x%x\n", __FUNCTION__, i_src, phase, irq_phase);
+		printk(KERN_DEBUG " %s: unexpected bus free. i_src=0x%x, phase=0x%x, irq_phase=0x%x\n", __FUNCTION__, i_src, phase, irq_phase);
 
 		*sync_neg       = SYNC_NOT_YET;
 		data->CurrentSC = NULL;
@@ -1208,7 +1200,7 @@ static void nspintr(int irq, void *dev_id, struct pt_regs *regs)
 		break;
 	}
 
-	//DEBUG(0, __func__ "() out\n");
+	//DEBUG(0, "%s: out\n", __FUNCTION__);
 	return;	
 
 timer_out:
@@ -1246,7 +1238,7 @@ static int nsp_detect(Scsi_Host_Template *sht)
 
 	snprintf(data->nspinfo,
 		 sizeof(data->nspinfo),
-		 "NinjaSCSI-3/32Bi Driver $Revision: 1.4 $ IO:0x%04lx-0x%04lx MMIO(virt addr):0x%04lx IRQ:%02d",
+		 "NinjaSCSI-3/32Bi Driver $Revision: 1.5 $ IO:0x%04lx-0x%04lx MMIO(virt addr):0x%04lx IRQ:%02d",
 		 host->io_port, host->io_port + host->n_io_port - 1,
 		 host->base,
 		 host->irq);
@@ -1303,16 +1295,28 @@ static int nsp_proc_info(char  *buffer,
 	int speed;
 	unsigned long flags;
 	nsp_hw_data *data = &nsp_data;
-	struct Scsi_Host *host;
+	struct Scsi_Host *host = NULL;
 
 	if (inout) {
 		return -EINVAL;
 	}
 
+	/* search this HBA host */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,45))
 	host = scsi_host_hn_get(hostno);
+#else
+	for (host=scsi_hostlist; host; host=host->next) {
+                if (host->host_no == hostno) {
+                        break;
+                }
+        }
+#endif
+	if (host == NULL) {
+		return -ESRCH;
+	}
 
 	SPRINTF("NinjaSCSI status\n\n");
-	SPRINTF("Driver version:        $Revision: 1.4 $\n");
+	SPRINTF("Driver version:        $Revision: 1.5 $\n");
 	SPRINTF("SCSI host No.:         %d\n",          hostno);
 	SPRINTF("IRQ:                   %d\n",          host->irq);
 	SPRINTF("IO:                    0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
@@ -1393,45 +1397,6 @@ static int nsp_proc_info(char  *buffer,
 }
 #undef SPRINTF
 
-/*---------------------------------------------------------------*/
-/* error handler                                                 */
-/*---------------------------------------------------------------*/
-static int nsp_reset(Scsi_Cmnd *SCpnt, unsigned int reset_flags)
-{
-	nsp_hw_data *data = &nsp_data;
-	int ret = 0;
-
-	DEBUG(0, "%s: SCpnt=0x%p why=%d\n", __FUNCTION__, SCpnt, reset_flags);
-
-	if (reset_flags & SCSI_RESET_SUGGEST_BUS_RESET) {
-		nsp_eh_bus_reset(SCpnt);
-
-		ret |= SCSI_RESET_BUS_RESET;
-	}
-
-	if (reset_flags & SCSI_RESET_SUGGEST_HOST_RESET) {
-		nsp_eh_host_reset(SCpnt);
-
-		ret |= SCSI_RESET_HOST_RESET;
-	}
-
-	if (ret != 0) {
-		return SCSI_RESET_SUCCESS | ret;
-	} else {
-		nsphw_init_sync(data);
-		return SCSI_RESET_PUNT;
-	}
-}
-
-static int nsp_abort(Scsi_Cmnd *SCpnt)
-{
-	DEBUG(0, "%s: SCpnt=0x%p\n", __FUNCTION__, SCpnt);
-
-	nsp_eh_host_reset(SCpnt);
-	nsp_eh_bus_reset(SCpnt);
-
-	return SCSI_ABORT_SUCCESS;
-}
 
 /*static int nsp_eh_strategy(struct Scsi_Host *Shost)
 {
@@ -1460,7 +1425,7 @@ static int nsp_eh_bus_reset(Scsi_Cmnd *SCpnt)
 	unsigned int base = SCpnt->host->io_port;
 	int	     i;
 
-	DEBUG(0, "%s() SCpnt=0x%p base=0x%x\n", __FUNCTION__, SCpnt, base);
+	DEBUG(0, "%s: SCpnt=0x%p base=0x%x\n", __FUNCTION__, SCpnt, base);
 
 	nsp_write(base, IRQCONTROL, IRQCONTROL_ALLMASK);
 
@@ -1482,7 +1447,7 @@ static int nsp_eh_host_reset(Scsi_Cmnd *SCpnt)
 {
 	nsp_hw_data *data = &nsp_data;
 
-	DEBUG(0, "%s\n", __FUNCTION__);
+	DEBUG(0, "%s:\n", __FUNCTION__);
 
 	nsphw_init(data);
 
@@ -1517,7 +1482,7 @@ static dev_link_t *nsp_cs_attach(void)
 	dev_link_t   *link;
 	int	      ret, i;
 
-	DEBUG(0, "%s()\n", __FUNCTION__);
+	DEBUG(0, "%s:\n", __FUNCTION__);
 
 	/* Create new SCSI device */
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -1607,7 +1572,7 @@ static void nsp_cs_detach(dev_link_t *link)
 		return;
 	}
 
-	del_timer_sync(&link->release);
+	del_timer(&link->release);
 	if (link->state & DEV_CONFIG) {
 		nsp_cs_release((u_long)link);
 		if (link->state & DEV_STALE_CONFIG) {
@@ -1659,7 +1624,7 @@ static void nsp_cs_config(dev_link_t *link)
 	nsp_hw_data      *data = &nsp_data;
 
 
-	DEBUG(0, "%s() in\n", __FUNCTION__);
+	DEBUG(0, "%s: in\n", __FUNCTION__);
 
 	tuple.DesiredTuple    = CISTPL_CONFIG;
 	tuple.Attributes      = 0;
@@ -1764,7 +1729,7 @@ static void nsp_cs_config(dev_link_t *link)
 		break;
 
 	next_entry:
-		DEBUG(0, "%s next\n", __FUNCTION__);
+		DEBUG(0, "%s: next\n", __FUNCTION__);
 
 		if (link->io.NumPorts1)
 			CardServices(ReleaseIO, link->handle, &link->io);
@@ -1787,9 +1752,8 @@ static void nsp_cs_config(dev_link_t *link)
 	data->NumAddress             = link->io.NumPorts1;
 	data->IrqNumber              = link->irq.AssignedIRQ;
 
-	DEBUG(0, "%s I/O[0x%x+0x%x] IRQ %d\n",
-		__FUNCTION__,
-	      data->BaseAddress, data->NumAddress, data->IrqNumber);
+	DEBUG(0, "%s: I/O[0x%x+0x%x] IRQ %d\n",
+	      __FUNCTION__, data->BaseAddress, data->NumAddress, data->IrqNumber);
 
 	if(nsphw_init(data) == FALSE) {
 		goto cs_failed;
@@ -1804,8 +1768,13 @@ static void nsp_cs_config(dev_link_t *link)
 	DEBUG(0, "GET_SCSI_INFO\n");
 	tail = &link->dev;
 	info->ndev = 0;
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,45))
 	for (host = scsi_host_get_next(NULL); host;
 	     host = scsi_host_get_next(host)) {
+#else
+	for (host = scsi_hostlist; host != NULL; host = host->next) {
+#endif
 		if (host->hostt == &driver_template) {
 			for (dev = host->host_queue; dev != NULL; dev = dev->next) {
 				u_long arg[2], id;
@@ -1998,7 +1967,7 @@ static int nsp_cs_event(event_t		       event,
 		DEBUG(0, " event: unknown\n");
 		break;
 	}
-	DEBUG(0, "%s end\n", __FUNCTION__);
+	DEBUG(0, "%s: end\n", __FUNCTION__);
 	return 0;
 } /* nsp_cs_event */
 
@@ -2009,7 +1978,7 @@ static int __init nsp_cs_init(void)
 {
 	servinfo_t serv;
 
-	DEBUG(0, "%s() in\n", __FUNCTION__);
+	DEBUG(0, "%s: in\n", __FUNCTION__);
 	DEBUG(0, "%s\n", version);
 	CardServices(GetCardServicesInfo, &serv);
 	if (serv.Revision != CS_RELEASE_CODE) {
@@ -2019,14 +1988,14 @@ static int __init nsp_cs_init(void)
 	}
 	register_pcmcia_driver(&dev_info, &nsp_cs_attach, &nsp_cs_detach);
 
-	DEBUG(0, "%s() out\n", __FUNCTION__);
+	DEBUG(0, "%s: out\n", __FUNCTION__);
 	return 0;
 }
 
 
 static void __exit nsp_cs_cleanup(void)
 {
-	DEBUG(0, "%s() unloading\n", __FUNCTION__);
+	DEBUG(0, "%s: unloading\n", __FUNCTION__);
 	unregister_pcmcia_driver(&dev_info);
 	while (dev_list != NULL) {
 		if (dev_list->state & DEV_CONFIG) {

drivers/scsi/pcmcia/nsp_cs.h

@@ -10,7 +10,7 @@
 
 =========================================================*/
 
-/* $Id: nsp_cs.h,v 1.3 2002/10/10 11:07:52 elca Exp $ */
+/* $Id: nsp_cs.h,v 1.4 2002/11/05 12:06:29 elca Exp $ */
 
 #ifndef  __nsp_cs__
 #define  __nsp_cs__
@@ -26,7 +26,7 @@
 /************************************
  * Some useful macros...
  */
-#define Number(arr) ((int) (sizeof(arr) / sizeof(arr[0])))
+#define NUMBER(arr) ((int) (sizeof(arr) / sizeof(arr[0]))) /* from XtNumber() in /usr/X11R6/include/X11/Intrinsic.h */
 #define BIT(x)      (1L << (x))
 #define MIN(a,b)    ((a) > (b) ? (b) : (a))
 
@@ -270,10 +270,10 @@ typedef struct _nsp_hw_data {
 
 
 
-static void nsp_cs_release(u_long arg);
-static int nsp_cs_event(event_t event, int priority, event_callback_args_t *args);
+static void        nsp_cs_release(u_long arg);
+static int         nsp_cs_event(event_t event, int priority, event_callback_args_t *args);
 static dev_link_t *nsp_cs_attach(void);
-static void nsp_cs_detach(dev_link_t *);
+static void        nsp_cs_detach(dev_link_t *);
 
 static unsigned int nsphw_start_selection(Scsi_Cmnd *SCpnt, nsp_hw_data *data);
 static void nsp_start_timer(Scsi_Cmnd *SCpnt, nsp_hw_data *data, int time);
@@ -285,9 +285,6 @@ static int nsp_proc_info(char *buffer, char **start, off_t offset,
 			 int length, int hostno, int inout);
 static int nsp_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
 
-static int nsp_abort(Scsi_Cmnd *);
-static int nsp_reset(Scsi_Cmnd *, unsigned int);
-
 /*static int nsp_eh_abort(Scsi_Cmnd * SCpnt);*/
 /*static int nsp_eh_device_reset(Scsi_Cmnd *SCpnt);*/
 static int nsp_eh_bus_reset(Scsi_Cmnd *SCpnt);

drivers/scsi/pcmcia/nsp_message.c

@@ -64,7 +64,7 @@ static void nsp_message_out(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
 	DEBUG(0, " msgout loop\n");
 	do {
 		if (nsp_xfer(SCpnt, data, BUSPHASE_MESSAGE_OUT)) {
-			printk(KERN_DEBUG " %s msgout: xfer short\n", __FUNCTION__);
+			printk(KERN_DEBUG " %s: msgout: xfer short\n", __FUNCTION__);
 		}
 
 		/* catch a next signal */

drivers/scsi/qlogicfas.c

@@ -613,7 +613,7 @@ int qlogicfas_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 #ifdef PCMCIA
 
 /*
- *	Allow PCMCIA code to preset the port */
+ *	Allow PCMCIA code to preset the port
  *	port should be 0 and irq to -1 respectively for autoprobing 
  */
 

drivers/scsi/u14-34f.c

@@ -1486,16 +1486,16 @@ static int u14_34f_eh_host_reset(Scsi_Cmnd *SCarg) {
    return SUCCESS;
 }
 
-static int u14_34f_bios_param(Disk *disk, struct block_device *bdev,
-                                                          int *dkinfo) {
+static int u14_34f_bios_param(struct scsi_device *disk, struct block_device *bdev,
+	sector_t capacity, int *dkinfo) {
    unsigned int j = 0;
-   int size = disk->capacity;
+   unsigned int size = capacity;
 
    dkinfo[0] = HD(j)->heads;
    dkinfo[1] = HD(j)->sectors;
    dkinfo[2] = size / (HD(j)->heads * HD(j)->sectors);
 
-   if (ext_tran && (scsicam_bios_param(disk, bdev, dkinfo) < 0)) {
+   if (ext_tran && (scsicam_bios_param(bdev, capacity, dkinfo) < 0)) {
       dkinfo[0] = 255;
       dkinfo[1] = 63;
       dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);

drivers/scsi/u14-34f.h

@@ -7,7 +7,7 @@ static int u14_34f_release(struct Scsi_Host *);
 static int u14_34f_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
 static int u14_34f_eh_abort(Scsi_Cmnd *);
 static int u14_34f_eh_host_reset(Scsi_Cmnd *);
-static int u14_34f_bios_param(Disk *, struct block_device *, int *);
+static int u14_34f_bios_param(struct scsi_device *, struct block_device *, sector_t, int *);
 static int u14_34f_slave_attach(Scsi_Device *);
 
 #define U14_34F_VERSION "8.00.00"
@@ -17,8 +17,6 @@ static int u14_34f_slave_attach(Scsi_Device *);
                 detect:                  u14_34f_detect,                     \
                 release:                 u14_34f_release,                    \
                 queuecommand:            u14_34f_queuecommand,               \
-                abort:                   NULL,                               \
-                reset:                   NULL,                               \
                 eh_abort_handler:        u14_34f_eh_abort,                   \
                 eh_device_reset_handler: NULL,                               \
                 eh_bus_reset_handler:    NULL,                               \

drivers/scsi/ultrastor.c

@@ -8,6 +8,9 @@
  *    John's work modified by Caleb Epstein (cae@jpmorgan.com) and 
  *    Eric Youngdale (ericy@cais.com).
  *	Thanks to UltraStor for providing the necessary documentation
+ *
+ *  This is an old driver, for the 14F and 34F you should be using the
+ *  u14-34f driver instead.
  */
 
 /*
@@ -164,8 +167,8 @@
    packed structure.  */
 
 typedef struct {
-  unsigned int address;
-  unsigned int num_bytes;
+  u32 address;
+  u32 num_bytes;
 } ultrastor_sg_list;
 
 
@@ -190,7 +193,7 @@ struct mscp {
   unsigned char scsi_cdbs[12];	/* SCSI commands */
   unsigned char adapter_status;	/* non-zero indicates HA error */
   unsigned char target_status;	/* non-zero indicates target error */
-  unsigned int sense_data PACKED;
+  u32 sense_data PACKED;
   /* The following fields are for software only.  They are included in
      the MSCP structure because they are associated with SCSI requests.  */
   void (*done)(Scsi_Cmnd *);
@@ -289,17 +292,15 @@ static void do_ultrastor_interrupt(int, void *, struct pt_regs *);
 static inline void build_sg_list(struct mscp *, Scsi_Cmnd *SCpnt);
 
 
+/* Always called with host lock held */
+
 static inline int find_and_clear_bit_16(unsigned short *field)
 {
   int rv;
-  unsigned long flags;
 
-  save_flags(flags);
-  cli();
   if (*field == 0) panic("No free mscp");
   asm("xorl %0,%0\n0:\tbsfw %1,%w0\n\tbtr %0,%1\n\tjnc 0b"
       : "=&r" (rv), "=m" (*field) : "1" (*field));
-  restore_flags(flags);
   return rv;
 }
 
@@ -320,14 +321,12 @@ static inline unsigned char xchgb(unsigned char reg,
 
 #if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
 
-static void log_ultrastor_abort(register struct ultrastor_config *config,
+/* Always called with the host lock held */
+static void log_ultrastor_abort(struct ultrastor_config *config,
 				int command)
 {
   static char fmt[80] = "abort %d (%x); MSCP free pool: %x;";
-  register int i;
-  unsigned long flags;
-  save_flags(flags);
-  cli();
+  int i;
 
   for (i = 0; i < ULTRASTOR_MAX_CMDS; i++)
     {
@@ -340,7 +339,7 @@ static void log_ultrastor_abort(register struct ultrastor_config *config,
   fmt[20 + ULTRASTOR_MAX_CMDS * 2] = '\n';
   fmt[21 + ULTRASTOR_MAX_CMDS * 2] = 0;
   printk(fmt, command, &config->mscp[command], config->mscp_free);
-  restore_flags(flags);
+
 }
 #endif
 
@@ -528,7 +527,7 @@ static int ultrastor_14f_detect(Scsi_Host_Template * tpnt)
 
 static int ultrastor_24f_detect(Scsi_Host_Template * tpnt)
 {
-  register int i;
+  int i;
   struct Scsi_Host * shpnt = NULL;
 
 #if (ULTRASTOR_DEBUG & UD_DETECT)
@@ -638,13 +637,13 @@ static int ultrastor_24f_detect(Scsi_Host_Template * tpnt)
   return FALSE;
 }
 
-int ultrastor_detect(Scsi_Host_Template * tpnt)
+static int ultrastor_detect(Scsi_Host_Template * tpnt)
 {
-    tpnt->proc_name = "ultrastor";
-  return ultrastor_14f_detect(tpnt) || ultrastor_24f_detect(tpnt);
+	tpnt->proc_name = "ultrastor";
+	return ultrastor_14f_detect(tpnt) || ultrastor_24f_detect(tpnt);
 }
 
-const char *ultrastor_info(struct Scsi_Host * shpnt)
+static const char *ultrastor_info(struct Scsi_Host * shpnt)
 {
     static char buf[64];
 
@@ -662,7 +661,7 @@ const char *ultrastor_info(struct Scsi_Host * shpnt)
     return buf;
 }
 
-static inline void build_sg_list(register struct mscp *mscp, Scsi_Cmnd *SCpnt)
+static inline void build_sg_list(struct mscp *mscp, Scsi_Cmnd *SCpnt)
 {
 	struct scatterlist *sl;
 	long transfer_length = 0;
@@ -683,14 +682,13 @@ static inline void build_sg_list(register struct mscp *mscp, Scsi_Cmnd *SCpnt)
 	mscp->transfer_data_length = transfer_length;
 }
 
-int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 {
-    register struct mscp *my_mscp;
+    struct mscp *my_mscp;
 #if ULTRASTOR_MAX_CMDS > 1
     int mscp_index;
 #endif
     unsigned int status;
-    unsigned long flags;
 
     /* Next test is for debugging; "can't happen" */
     if ((config.mscp_free & ((1U << ULTRASTOR_MAX_CMDS) - 1)) == 0)
@@ -706,14 +704,8 @@ int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 
     my_mscp = &config.mscp[mscp_index];
 
-#if 1
-    /* This way is faster.  */
     *(unsigned char *)my_mscp = OP_SCSI | (DTD_SCSI << 3);
-#else
-    my_mscp->opcode = OP_SCSI;
-    my_mscp->xdir = DTD_SCSI;
-    my_mscp->dcn = FALSE;
-#endif
+
     /* Tape drives don't work properly if the cache is used.  The SCSI
        READ command for a tape doesn't have a block offset, and the adapter
        incorrectly assumes that all reads from the tape read the same
@@ -748,35 +740,31 @@ int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
     SCpnt->host_scribble = (unsigned char *)my_mscp;
 
     /* Find free OGM slot.  On 24F, look for OGM status byte == 0.
-       On 14F and 34F, wait for local interrupt pending flag to clear.  */
+       On 14F and 34F, wait for local interrupt pending flag to clear. 
+       
+       FIXME: now we are using new_eh we should punt here and let the
+       midlayer sort it out */
 
-  retry:
+retry:
     if (config.slot)
-	while (inb(config.ogm_address - 1) != 0 &&
-	       config.aborted[mscp_index] == 0xff) barrier();
+	while (inb(config.ogm_address - 1) != 0 && config.aborted[mscp_index] == 0xff)
+		barrier();
 
     /* else??? */
 
-    while ((inb(LCL_DOORBELL_INTR(config.doorbell_address)) & 
-	    (config.slot ? 2 : 1)) 
-	   && config.aborted[mscp_index] == 0xff) barrier();
-
-    /* To avoid race conditions, make the code to write to the adapter
-       atomic.  This simplifies the abort code.  */
+    while ((inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1))  && config.aborted[mscp_index] == 0xff)
+    	barrier();
 
-    save_flags(flags);
-    cli();
+    /* To avoid race conditions, keep the code to write to the adapter
+       atomic.  This simplifies the abort code.  Right now the
+       scsi mid layer has the host_lock already held
+     */
 
-    if (inb(LCL_DOORBELL_INTR(config.doorbell_address)) &
-	(config.slot ? 2 : 1))
-      {
-      restore_flags(flags);
+    if (inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1))
       goto retry;
-      }
 
     status = xchgb(0, &config.aborted[mscp_index]);
     if (status != 0xff) {
-	restore_flags(flags);
 
 #if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
 	printk("USx4F: queuecommand: aborted\n");
@@ -811,8 +799,6 @@ int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 	outb(0x1, LCL_DOORBELL_INTR(config.doorbell_address));
     }
 
-    restore_flags(flags);
-
 #if (ULTRASTOR_DEBUG & UD_COMMAND)
     printk("USx4F: queuecommand: returning\n");
 #endif
@@ -835,7 +821,7 @@ int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 
  */
 
-int ultrastor_abort(Scsi_Cmnd *SCpnt)
+static int ultrastor_abort(Scsi_Cmnd *SCpnt)
 {
 #if ULTRASTOR_DEBUG & UD_ABORT
     char out[108];
@@ -844,14 +830,16 @@ int ultrastor_abort(Scsi_Cmnd *SCpnt)
 #endif
     unsigned int mscp_index;
     unsigned char old_aborted;
+    unsigned long flags;
     void (*done)(Scsi_Cmnd *);
+    struct Scsi_Host *host = SCpnt->host;
 
     if(config.slot) 
-      return SCSI_ABORT_SNOOZE;  /* Do not attempt an abort for the 24f */
-
+      return FAILED;  /* Do not attempt an abort for the 24f */
+      
     /* Simple consistency checking */
     if(!SCpnt->host_scribble)
-      return SCSI_ABORT_NOT_RUNNING;
+      return FAILED;
 
     mscp_index = ((struct mscp *)SCpnt->host_scribble) - config.mscp;
     if (mscp_index >= ULTRASTOR_MAX_CMDS)
@@ -863,8 +851,8 @@ int ultrastor_abort(Scsi_Cmnd *SCpnt)
 	int port0 = (config.slot << 12) | 0xc80;
 	int i;
 	unsigned long flags;
-	save_flags(flags);
-	cli();
+	
+	spin_lock_irqsave(host->host_lock, flags);
 	strcpy(out, "OGM %d:%x ICM %d:%x ports:  ");
 	for (i = 0; i < 16; i++)
 	  {
@@ -879,7 +867,7 @@ int ultrastor_abort(Scsi_Cmnd *SCpnt)
 	ogm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 23));
 	icm_status = inb(port0 + 27);
 	icm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 28));
-	restore_flags(flags);
+	spin_lock_irqsave(host->host_lock, flags);
       }
 
     /* First check to see if an interrupt is pending.  I suspect the SiS
@@ -888,14 +876,13 @@ int ultrastor_abort(Scsi_Cmnd *SCpnt)
     if (config.slot ? inb(config.icm_address - 1) == 2 :
 	(inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1))
       {
-	unsigned long flags;
-	save_flags(flags);
 	printk("Ux4F: abort while completed command pending\n");
-	restore_flags(flags);
-	cli();
+	
+	spin_lock_irqsave(host->host_lock, flags);
+	/* FIXME: Ewww... need to think about passing host around properly */
 	ultrastor_interrupt(0, NULL, NULL);
-	restore_flags(flags);
-	return SCSI_ABORT_SUCCESS;  /* FIXME - is this correct? -ERY */
+	spin_unlock_irqrestore(host->host_lock, flags);
+	return SUCCESS;
       }
 #endif
 
@@ -904,7 +891,7 @@ int ultrastor_abort(Scsi_Cmnd *SCpnt)
     /* aborted == 0xff is the signal that queuecommand has not yet sent
        the command.  It will notice the new abort flag and fail.  */
     if (old_aborted == 0xff)
-	return SCSI_ABORT_SUCCESS;
+	return SUCCESS;
 
     /* On 24F, send an abort MSCP request.  The adapter will interrupt
        and the interrupt handler will call done.  */
@@ -912,18 +899,18 @@ int ultrastor_abort(Scsi_Cmnd *SCpnt)
       {
 	unsigned long flags;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(host->host_lock, flags);
 	outl(isa_virt_to_bus(&config.mscp[mscp_index]), config.ogm_address);
-	inb(0xc80);	/* delay */
+	udelay(8);
 	outb(0x80, config.ogm_address - 1);
 	outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address));
 #if ULTRASTOR_DEBUG & UD_ABORT
 	log_ultrastor_abort(&config, mscp_index);
 	printk(out, ogm_status, ogm_addr, icm_status, icm_addr);
 #endif
-	restore_flags(flags);
-	return SCSI_ABORT_PENDING;
+	spin_unlock_irqrestore(host->host_lock, flags);
+	/* FIXME: add a wait for the abort to complete */
+	return SUCCESS;
       }
 
 #if ULTRASTOR_DEBUG & UD_ABORT
@@ -953,27 +940,30 @@ int ultrastor_abort(Scsi_Cmnd *SCpnt)
     done = config.mscp[mscp_index].done;
     config.mscp[mscp_index].done = 0;
     SCpnt->result = DID_ABORT << 16;
-    /* I worry about reentrancy in scsi.c  */
+    
+    /* Take the host lock to guard against scsi layer re-entry */
+    spin_lock_irqsave(host->host_lock, flags);
     done(SCpnt);
+    spin_unlock_irqrestore(host->host_lock, flags);
 
     /* Need to set a timeout here in case command never completes.  */
-    return SCSI_ABORT_SUCCESS;
+    return SUCCESS;
 }
 
-int ultrastor_reset(Scsi_Cmnd * SCpnt, unsigned int reset_flags)
+static int ultrastor_host_reset(Scsi_Cmnd * SCpnt)
 {
     unsigned long flags;
-    register int i;
+    int i;
+    struct Scsi_Host *host = SCpnt->host;
+    
 #if (ULTRASTOR_DEBUG & UD_RESET)
     printk("US14F: reset: called\n");
 #endif
 
     if(config.slot)
-      return SCSI_RESET_PUNT;  /* Do not attempt a reset for the 24f */
-
-    save_flags(flags);
-    cli();
+    	return FAILED;
 
+    spin_lock_irqsave(host->host_lock, flags);
     /* Reset the adapter and SCSI bus.  The SCSI bus reset can be
        inhibited by clearing ultrastor_bus_reset before probe.  */
     outb(0xc0, LCL_DOORBELL_INTR(config.doorbell_address));
@@ -1005,7 +995,10 @@ int ultrastor_reset(Scsi_Cmnd * SCpnt, unsigned int reset_flags)
 #endif
 
     /* FIXME - if the device implements soft resets, then the command
-       will still be running.  ERY */
+       will still be running.  ERY  
+       
+       Even bigger deal with new_eh! 
+     */
 
     memset((unsigned char *)config.aborted, 0, sizeof config.aborted);
 #if ULTRASTOR_MAX_CMDS == 1
@@ -1014,7 +1007,7 @@ int ultrastor_reset(Scsi_Cmnd * SCpnt, unsigned int reset_flags)
     config.mscp_free = ~0;
 #endif
 
-    restore_flags(flags);
+    spin_unlock_irqrestore(host->host_lock, flags);
     return SCSI_RESET_SUCCESS;
 
 }
@@ -1041,7 +1034,7 @@ static void ultrastor_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if ULTRASTOR_MAX_CMDS > 1
     unsigned int mscp_index;
 #endif
-    register struct mscp *mscp;
+    struct mscp *mscp;
     void (*done)(Scsi_Cmnd *);
     Scsi_Cmnd *SCtmp;
 

drivers/scsi/ultrastor.h

@@ -13,13 +13,12 @@
 #ifndef _ULTRASTOR_H
 #define _ULTRASTOR_H
 
-int ultrastor_detect(Scsi_Host_Template *);
-const char *ultrastor_info(struct Scsi_Host * shpnt);
-int ultrastor_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int ultrastor_abort(Scsi_Cmnd *);
-int ultrastor_reset(Scsi_Cmnd *, unsigned int);
-int ultrastor_biosparam(struct scsi_device *, struct block_device *,
-		sector_t, int *);
+static int ultrastor_detect(Scsi_Host_Template *);
+static const char *ultrastor_info(struct Scsi_Host * shpnt);
+static int ultrastor_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int ultrastor_abort(Scsi_Cmnd *);
+static int ultrastor_host_reset(Scsi_Cmnd *);
+static int ultrastor_biosparam(struct scsi_device *, struct block_device *, sector_t, int *);
 
 
 #define ULTRASTOR_14F_MAX_SG 16
@@ -35,8 +34,8 @@ int ultrastor_biosparam(struct scsi_device *, struct block_device *,
 			  detect:            ultrastor_detect, 		\
 			  info:              ultrastor_info, 		\
 			  queuecommand:      ultrastor_queuecommand,	\
-			  abort:             ultrastor_abort, 		\
-			  reset:             ultrastor_reset,		\
+			  eh_abort_handler:  ultrastor_abort, 		\
+			  eh_host_reset_handler:  ultrastor_host_reset,	\
 			  bios_param:        ultrastor_biosparam, 	\
 			  can_queue:         ULTRASTOR_MAX_CMDS,	\
 			  this_id:           0, 			\

drivers/scsi/wd7000.c

@@ -1240,7 +1240,7 @@ static int wd7000_adapter_reset(Adapter * host)
 	host->control = 0;	/* this must always shadow ASC_CONTROL */
 
 	if (WAIT(host->iobase + ASC_STAT, ASC_STATMASK, CMD_RDY, 0)) {
-		printk("wd7000_init: WAIT timed out.\n");
+		printk(KERN_ERR "wd7000_init: WAIT timed out.\n");
 		return -1;	/* -1 = not ok */
 	}
 
@@ -1249,25 +1249,25 @@ static int wd7000_adapter_reset(Adapter * host)
 
 		switch (diag) {
 		case 2:
-			printk("RAM failure.\n");
+			printk(KERN_ERR "RAM failure.\n");
 			break;
 		case 3:
-			printk("FIFO R/W failed\n");
+			printk(KERN_ERR "FIFO R/W failed\n");
 			break;
 		case 4:
-			printk("SBIC register R/W failed\n");
+			printk(KERN_ERR "SBIC register R/W failed\n");
 			break;
 		case 5:
-			printk("Initialization D-FF failed.\n");
+			printk(KERN_ERR "Initialization D-FF failed.\n");
 			break;
 		case 6:
-			printk("Host IRQ D-FF failed.\n");
+			printk(KERN_ERR "Host IRQ D-FF failed.\n");
 			break;
 		case 7:
-			printk("ROM checksum error.\n");
+			printk(KERN_ERR "ROM checksum error.\n");
 			break;
 		default:
-			printk("diagnostic code 0x%02Xh received.\n", diag);
+			printk(KERN_ERR "diagnostic code 0x%02Xh received.\n", diag);
 		}
 		return -1;
 	}

fs/intermezzo/vfs.c

@@ -74,7 +74,7 @@
 #ifdef CONFIG_FS_EXT_ATTR
 # include <linux/ext_attr.h>
 
-# ifdef CONFIG_FS_POSIX_ACL
+# if 0 /* was a broken check for Posix ACLs */
 #  include <linux/posix_acl.h>
 # endif
 #endif
@@ -466,7 +466,7 @@ int lento_setattr(const char *name, struct iattr *iattr,
         struct dentry *dentry;
         struct presto_file_set *fset;
         int error;
-#ifdef  CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
         int (*set_posix_acl)(struct inode *, int type, posix_acl_t *)=NULL;
 #endif
 
@@ -507,7 +507,7 @@ int lento_setattr(const char *name, struct iattr *iattr,
                                  (dentry->d_inode->i_mode & ~S_IALLUGO);
                 CDEBUG(D_PIOCTL, "chmod: orig %#o, set %#o, result %#o\n",
                        dentry->d_inode->i_mode, set_mode, iattr->ia_mode);
-#ifdef CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
                 /* ACl code interacts badly with setattr 
                  * since it tries to modify the ACL using 
                  * set_ext_attr which recurses back into presto.  
@@ -535,7 +535,7 @@ int lento_setattr(const char *name, struct iattr *iattr,
                 }
         }
 
-#ifdef CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
         /* restore the inode_operations if we changed them*/
         if (iattr->ia_valid & ATTR_MODE) 
                 dentry->d_inode->i_op->set_posix_acl=set_posix_acl;
@@ -2252,7 +2252,7 @@ int lento_iopen(const char *name, ino_t ino, unsigned int generation,
 
 #ifdef CONFIG_FS_EXT_ATTR
 
-#ifdef CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
 /* Posix ACL code changes i_mode without using a notify_change (or
  * a mark_inode_dirty!). We need to duplicate this at the reintegrator
  * which is done by this function. This function also takes care of 
@@ -2395,7 +2395,7 @@ int presto_do_set_ext_attr(struct presto_file_set *fset,
                 goto exit;
         }
 
-#ifdef CONFIG_FS_POSIX_ACL
+#if 0 /* was a broken check for Posix ACLs */
         /* Reset mode if specified*/
         /* XXX: when we do native acl support, move this code out! */
         if (mode != NULL) {

fs/locks.c

@@ -1401,6 +1401,7 @@ int fcntl_setlk(struct file *filp, unsigned int cmd, struct flock *l)
 
 	inode = filp->f_dentry->d_inode;
 
+#ifdef CONFIG_MMU
 	/* Don't allow mandatory locks on files that may be memory mapped
 	 * and shared.
 	 */
@@ -1413,6 +1414,7 @@ int fcntl_setlk(struct file *filp, unsigned int cmd, struct flock *l)
 			goto out;
 		}
 	}
+#endif
 
 	error = flock_to_posix_lock(filp, file_lock, &flock);
 	if (error)

fs/stat.c

@@ -96,8 +96,8 @@ int vfs_fstat(unsigned int fd, struct kstat *stat)
 }
 
 #if !defined(__alpha__) && !defined(__sparc__) && !defined(__ia64__) \
- && !defined(CONFIG_ARCH_S390) && !defined(__hppa__) && !defined(__x86_64__) \
- && !defined(__arm__)
+  && !defined(CONFIG_ARCH_S390) && !defined(__hppa__) && !defined(__x86_64__) \
+  && !defined(__arm__) && !defined(CONFIG_V850)
 
 /*
  * For backward compatibility?  Maybe this should be moved

include/asm-i386/timer.h

@@ -19,4 +19,8 @@ struct timer_opts{
 #define TICK_SIZE (tick_nsec / 1000)
 
 extern struct timer_opts* select_timer(void);
+
+/* Modifiers for buggy PIT handling */
+
+extern int pit_latch_buggy;
 #endif

lib/Kconfig

@@ -17,8 +17,8 @@ config CRC32
 #
 config ZLIB_INFLATE
 	tristate
-	default m if CRAMFS!=y && PPP_DEFLATE!=y && JFFS2_FS!=y && ZISOFS_FS!=y && (CRAMFS=m || PPP_DEFLATE=m || JFFS2_FS=m || ZISOFS_FS=m)
-	default y if CRAMFS=y || PPP_DEFLATE=y || JFFS2_FS=y || ZISOFS_FS=y
+	default y if CRAMFS=y || PPP_DEFLATE=y || JFFS2_FS=y || ZISOFS_FS=y || BINFMT_ZFLAT=y
+	default m if CRAMFS=m || PPP_DEFLATE=m || JFFS2_FS=m || ZISOFS_FS=m || BINFMT_ZFLAT=m
 
 config ZLIB_DEFLATE
 	tristate

usr/Makefile

@@ -11,6 +11,6 @@ $(obj)/initramfs_data.o: $(src)/initramfs_data.scr $(obj)/initramfs_data.cpio.gz
 	$(call if_changed,ld)
 
 $(obj)/initramfs_data.cpio.gz: $(obj)/gen_init_cpio
-	( cd $(obj) ; ./$< | gzip -9c > $@ )
+	./$< | gzip -9c > $@