Commit 653853bc authored by Ingo Molnar's avatar Ingo Molnar Committed by Linus Torvalds

[PATCH] generic irq subsystem: core

The main goal of this patch is to consolidate all the different but still
fundamentally similar arch/*/kernel/irq.c code into the kernel/irq/ subsystem.

There are 4 new files in the kernel/irq/ directory:

 - handle.c: core bits: __do_IRQ() and handle_IRQ_event(),
   callable from arch-specific irq.c code.

 - manage.c: the main driver apis

 - spurious.c: the handling of buggy interrupt sources.

 - autoprobe.c: probing of interrupts - older code but still in use.

 - proc.c: /proc/irq/ code.

 - internals.h for irq-core-internal interfaces not visible to drivers
   nor arch PIC code.

An architecture enables the generic hardirq code by defining
CONFIG_GENERIC_HARDIRQS in its arch Kconfig.  People doing this conversion
should check out the x86/x64/ppc/ppc64 patches for details - the conversion is
quite straightforward but every converted function (i.e.  every function
removed from the arch irq.c) _must_ be matched to the generic version and if
there is any detail that the generic code should do it has to be added to the
generic code.  All of the currently converted 4 architectures were converted
like that, and the generic code was extended/fixed along the way.

Other changes related to this patchset:

 - clean up the irq include files (linux/irq.h, linux/interrupt.h,
   linux/hardirq.h) and consolidate asm-*/[hard]irq.h. Note, to keep all
   non-touched architectures in an untouched state this consolidation is
   done carefully and strictly under CONFIG_GENERIC_HARDIRQS.

   Once the consolidation is done we can do a couple of final cleanups
   to reach the following logical splitup of 3 include files:

     linux/interrupt.h: driver-visible APIs and details
     linux/irq.h:       core irq and arch-PIC code, internals
     asm-*/irq.h:       arch PIC and irq delivery details

   the following include files will likely vanish:

     linux/hardirq.h    merges into linux/irq.h
     asm-*/hardirq.h:   merges into asm-*/irq.h
     asm-*/hw_irq.h:    merges into asm-*/irq.h

   Christoph would like to do these once the current wave of
   cleanups gets in.
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 2dbc5729
...@@ -5,6 +5,40 @@ ...@@ -5,6 +5,40 @@
#include <linux/smp_lock.h> #include <linux/smp_lock.h>
#include <asm/hardirq.h> #include <asm/hardirq.h>
#ifdef CONFIG_GENERIC_HARDIRQS
/*
* We put the hardirq and softirq counter into the preemption
* counter. The bitmask has the following meaning:
*
* - bits 0-7 are the preemption count (max preemption depth: 256)
* - bits 8-15 are the softirq count (max # of softirqs: 256)
* - bits 16-27 are the hardirq count (max # of hardirqs: 4096)
*
* - ( bit 26 is the PREEMPT_ACTIVE flag. )
*
* PREEMPT_MASK: 0x000000ff
* SOFTIRQ_MASK: 0x0000ff00
* HARDIRQ_MASK: 0x0fff0000
*/
#define PREEMPT_BITS 8
#define SOFTIRQ_BITS 8
#define HARDIRQ_BITS 12
#define PREEMPT_SHIFT 0
#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS)
#define HARDIRQ_SHIFT (SOFTIRQ_SHIFT + SOFTIRQ_BITS)
/*
* The hardirq mask has to be large enough to have
* space for potentially all IRQ sources in the system
* nesting on a single CPU:
*/
#if (1 << HARDIRQ_BITS) < NR_IRQS
# error HARDIRQ_BITS is too low!
#endif
#endif /* CONFIG_GENERIC_HARDIRQS */
#define __IRQ_MASK(x) ((1UL << (x))-1) #define __IRQ_MASK(x) ((1UL << (x))-1)
#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT) #define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
...@@ -43,4 +77,12 @@ extern void synchronize_irq(unsigned int irq); ...@@ -43,4 +77,12 @@ extern void synchronize_irq(unsigned int irq);
# define synchronize_irq(irq) barrier() # define synchronize_irq(irq) barrier()
#endif #endif
#ifdef CONFIG_GENERIC_HARDIRQS
#define nmi_enter() (preempt_count() += HARDIRQ_OFFSET)
#define nmi_exit() (preempt_count() -= HARDIRQ_OFFSET)
#define irq_enter() (preempt_count() += HARDIRQ_OFFSET)
extern void irq_exit(void);
#endif
#endif /* LINUX_HARDIRQ_H */ #endif /* LINUX_HARDIRQ_H */
...@@ -40,6 +40,8 @@ struct irqaction { ...@@ -40,6 +40,8 @@ struct irqaction {
const char *name; const char *name;
void *dev_id; void *dev_id;
struct irqaction *next; struct irqaction *next;
int irq;
struct proc_dir_entry *dir;
}; };
extern irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs); extern irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs);
...@@ -48,6 +50,13 @@ extern int request_irq(unsigned int, ...@@ -48,6 +50,13 @@ extern int request_irq(unsigned int,
unsigned long, const char *, void *); unsigned long, const char *, void *);
extern void free_irq(unsigned int, void *); extern void free_irq(unsigned int, void *);
#ifdef CONFIG_GENERIC_HARDIRQS
extern void disable_irq_nosync(unsigned int irq);
extern void disable_irq(unsigned int irq);
extern void enable_irq(unsigned int irq);
#endif
/* /*
* Temporary defines for UP kernels, until all code gets fixed. * Temporary defines for UP kernels, until all code gets fixed.
*/ */
......
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#if !defined(CONFIG_ARCH_S390) #if !defined(CONFIG_ARCH_S390)
#include <linux/linkage.h>
#include <linux/cache.h> #include <linux/cache.h>
#include <linux/spinlock.h> #include <linux/spinlock.h>
#include <linux/cpumask.h> #include <linux/cpumask.h>
...@@ -71,7 +72,20 @@ extern irq_desc_t irq_desc [NR_IRQS]; ...@@ -71,7 +72,20 @@ extern irq_desc_t irq_desc [NR_IRQS];
#include <asm/hw_irq.h> /* the arch dependent stuff */ #include <asm/hw_irq.h> /* the arch dependent stuff */
extern int setup_irq(unsigned int , struct irqaction * ); extern int setup_irq(unsigned int irq, struct irqaction * new);
#ifdef CONFIG_GENERIC_HARDIRQS
extern cpumask_t irq_affinity[NR_IRQS];
extern asmlinkage int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
struct irqaction *action);
extern asmlinkage unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs);
extern void note_interrupt(unsigned int irq, irq_desc_t *desc, int action_ret);
extern void report_bad_irq(unsigned int irq, irq_desc_t *desc, int action_ret);
extern int can_request_irq(unsigned int irq, unsigned long irqflags);
extern void init_irq_proc(void);
#endif
extern hw_irq_controller no_irq_type; /* needed in every arch ? */ extern hw_irq_controller no_irq_type; /* needed in every arch ? */
......
...@@ -24,6 +24,7 @@ obj-$(CONFIG_STOP_MACHINE) += stop_machine.o ...@@ -24,6 +24,7 @@ obj-$(CONFIG_STOP_MACHINE) += stop_machine.o
obj-$(CONFIG_AUDIT) += audit.o obj-$(CONFIG_AUDIT) += audit.o
obj-$(CONFIG_AUDITSYSCALL) += auditsc.o obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
ifneq ($(CONFIG_IA64),y) ifneq ($(CONFIG_IA64),y)
# According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
......
obj-y := autoprobe.o handle.o manage.o spurious.o
obj-$(CONFIG_PROC_FS) += proc.o
/*
* linux/kernel/irq/autoprobe.c
*
* Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
*
* This file contains the interrupt probing code and driver APIs.
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/interrupt.h>
/*
* Autodetection depends on the fact that any interrupt that
* comes in on to an unassigned handler will get stuck with
* "IRQ_WAITING" cleared and the interrupt disabled.
*/
static DECLARE_MUTEX(probe_sem);
/**
* probe_irq_on - begin an interrupt autodetect
*
* Commence probing for an interrupt. The interrupts are scanned
* and a mask of potential interrupt lines is returned.
*
*/
unsigned long probe_irq_on(void)
{
unsigned long val, delay;
irq_desc_t *desc;
unsigned int i;
down(&probe_sem);
/*
* something may have generated an irq long ago and we want to
* flush such a longstanding irq before considering it as spurious.
*/
for (i = NR_IRQS-1; i > 0; i--) {
desc = irq_desc + i;
spin_lock_irq(&desc->lock);
if (!irq_desc[i].action)
irq_desc[i].handler->startup(i);
spin_unlock_irq(&desc->lock);
}
/* Wait for longstanding interrupts to trigger. */
for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
/* about 20ms delay */ barrier();
/*
* enable any unassigned irqs
* (we must startup again here because if a longstanding irq
* happened in the previous stage, it may have masked itself)
*/
for (i = NR_IRQS-1; i > 0; i--) {
desc = irq_desc + i;
spin_lock_irq(&desc->lock);
if (!desc->action) {
desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
if (desc->handler->startup(i))
desc->status |= IRQ_PENDING;
}
spin_unlock_irq(&desc->lock);
}
/*
* Wait for spurious interrupts to trigger
*/
for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
/* about 100ms delay */ barrier();
/*
* Now filter out any obviously spurious interrupts
*/
val = 0;
for (i = 0; i < NR_IRQS; i++) {
irq_desc_t *desc = irq_desc + i;
unsigned int status;
spin_lock_irq(&desc->lock);
status = desc->status;
if (status & IRQ_AUTODETECT) {
/* It triggered already - consider it spurious. */
if (!(status & IRQ_WAITING)) {
desc->status = status & ~IRQ_AUTODETECT;
desc->handler->shutdown(i);
} else
if (i < 32)
val |= 1 << i;
}
spin_unlock_irq(&desc->lock);
}
return val;
}
EXPORT_SYMBOL(probe_irq_on);
/**
* probe_irq_mask - scan a bitmap of interrupt lines
* @val: mask of interrupts to consider
*
* Scan the interrupt lines and return a bitmap of active
* autodetect interrupts. The interrupt probe logic state
* is then returned to its previous value.
*
* Note: we need to scan all the irq's even though we will
* only return autodetect irq numbers - just so that we reset
* them all to a known state.
*/
unsigned int probe_irq_mask(unsigned long val)
{
unsigned int mask;
int i;
mask = 0;
for (i = 0; i < NR_IRQS; i++) {
irq_desc_t *desc = irq_desc + i;
unsigned int status;
spin_lock_irq(&desc->lock);
status = desc->status;
if (status & IRQ_AUTODETECT) {
if (i < 16 && !(status & IRQ_WAITING))
mask |= 1 << i;
desc->status = status & ~IRQ_AUTODETECT;
desc->handler->shutdown(i);
}
spin_unlock_irq(&desc->lock);
}
up(&probe_sem);
return mask & val;
}
/**
* probe_irq_off - end an interrupt autodetect
* @val: mask of potential interrupts (unused)
*
* Scans the unused interrupt lines and returns the line which
* appears to have triggered the interrupt. If no interrupt was
* found then zero is returned. If more than one interrupt is
* found then minus the first candidate is returned to indicate
* their is doubt.
*
* The interrupt probe logic state is returned to its previous
* value.
*
* BUGS: When used in a module (which arguably shouldn't happen)
* nothing prevents two IRQ probe callers from overlapping. The
* results of this are non-optimal.
*/
int probe_irq_off(unsigned long val)
{
int i, irq_found = 0, nr_irqs = 0;
for (i = 0; i < NR_IRQS; i++) {
irq_desc_t *desc = irq_desc + i;
unsigned int status;
spin_lock_irq(&desc->lock);
status = desc->status;
if (status & IRQ_AUTODETECT) {
if (!(status & IRQ_WAITING)) {
if (!nr_irqs)
irq_found = i;
nr_irqs++;
}
desc->status = status & ~IRQ_AUTODETECT;
desc->handler->shutdown(i);
}
spin_unlock_irq(&desc->lock);
}
up(&probe_sem);
if (nr_irqs > 1)
irq_found = -irq_found;
return irq_found;
}
EXPORT_SYMBOL(probe_irq_off);
/*
* linux/kernel/irq/handle.c
*
* Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
*
* This file contains the core interrupt handling code.
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include "internals.h"
/*
* Linux has a controller-independent interrupt architecture.
* Every controller has a 'controller-template', that is used
* by the main code to do the right thing. Each driver-visible
* interrupt source is transparently wired to the apropriate
* controller. Thus drivers need not be aware of the
* interrupt-controller.
*
* The code is designed to be easily extended with new/different
* interrupt controllers, without having to do assembly magic or
* having to touch the generic code.
*
* Controller mappings for all interrupt sources:
*/
irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
[0 ... NR_IRQS-1] = {
.handler = &no_irq_type,
.lock = SPIN_LOCK_UNLOCKED
}
};
/*
* Generic 'no controller' code
*/
static void end_none(unsigned int irq) { }
static void enable_none(unsigned int irq) { }
static void disable_none(unsigned int irq) { }
static void shutdown_none(unsigned int irq) { }
static unsigned int startup_none(unsigned int irq) { return 0; }
static void ack_none(unsigned int irq)
{
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themself.
*/
ack_bad_irq(irq);
}
struct hw_interrupt_type no_irq_type = {
typename: "none",
startup: startup_none,
shutdown: shutdown_none,
enable: enable_none,
disable: disable_none,
ack: ack_none,
end: end_none,
set_affinity: NULL
};
/*
* Special, empty irq handler:
*/
irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs)
{
return IRQ_NONE;
}
/*
* Exit an interrupt context. Process softirqs if needed and possible:
*/
void irq_exit(void)
{
preempt_count() -= IRQ_EXIT_OFFSET;
if (!in_interrupt() && local_softirq_pending())
do_softirq();
preempt_enable_no_resched();
}
/*
* Have got an event to handle:
*/
asmlinkage int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
struct irqaction *action)
{
int ret, retval = 0, status = 0;
if (!(action->flags & SA_INTERRUPT))
local_irq_enable();
do {
ret = action->handler(irq, action->dev_id, regs);
if (ret == IRQ_HANDLED)
status |= action->flags;
retval |= ret;
action = action->next;
} while (action);
if (status & SA_SAMPLE_RANDOM)
add_interrupt_randomness(irq);
local_irq_disable();
return retval;
}
/*
* do_IRQ handles all normal device IRQ's (the special
* SMP cross-CPU interrupts have their own specific
* handlers).
*/
asmlinkage unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs)
{
irq_desc_t *desc = irq_desc + irq;
struct irqaction * action;
unsigned int status;
kstat_this_cpu.irqs[irq]++;
if (desc->status & IRQ_PER_CPU) {
irqreturn_t action_ret;
/*
* No locking required for CPU-local interrupts:
*/
desc->handler->ack(irq);
action_ret = handle_IRQ_event(irq, regs, desc->action);
if (!noirqdebug)
note_interrupt(irq, desc, action_ret);
desc->handler->end(irq);
return 1;
}
spin_lock(&desc->lock);
desc->handler->ack(irq);
/*
* REPLAY is when Linux resends an IRQ that was dropped earlier
* WAITING is used by probe to mark irqs that are being tested
*/
status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
status |= IRQ_PENDING; /* we _want_ to handle it */
/*
* If the IRQ is disabled for whatever reason, we cannot
* use the action we have.
*/
action = NULL;
if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
action = desc->action;
status &= ~IRQ_PENDING; /* we commit to handling */
status |= IRQ_INPROGRESS; /* we are handling it */
}
desc->status = status;
/*
* If there is no IRQ handler or it was disabled, exit early.
* Since we set PENDING, if another processor is handling
* a different instance of this same irq, the other processor
* will take care of it.
*/
if (unlikely(!action))
goto out;
/*
* Edge triggered interrupts need to remember
* pending events.
* This applies to any hw interrupts that allow a second
* instance of the same irq to arrive while we are in do_IRQ
* or in the handler. But the code here only handles the _second_
* instance of the irq, not the third or fourth. So it is mostly
* useful for irq hardware that does not mask cleanly in an
* SMP environment.
*/
for (;;) {
irqreturn_t action_ret;
spin_unlock(&desc->lock);
action_ret = handle_IRQ_event(irq, regs, action);
spin_lock(&desc->lock);
if (!noirqdebug)
note_interrupt(irq, desc, action_ret);
if (likely(!(desc->status & IRQ_PENDING)))
break;
desc->status &= ~IRQ_PENDING;
}
desc->status &= ~IRQ_INPROGRESS;
out:
/*
* The ->end() handler has to deal with interrupts which got
* disabled while the handler was running.
*/
desc->handler->end(irq);
spin_unlock(&desc->lock);
return 1;
}
/*
* IRQ subsystem internal functions and variables:
*/
extern int noirqdebug;
#ifdef CONFIG_PROC_FS
extern void register_irq_proc(unsigned int irq);
extern void register_handler_proc(unsigned int irq, struct irqaction *action);
extern void unregister_handler_proc(unsigned int irq, struct irqaction *action);
#else
static inline void register_irq_proc(unsigned int irq) { }
static inline void register_handler_proc(unsigned int irq,
struct irqaction *action) { }
static inline void unregister_handler_proc(unsigned int irq,
struct irqaction *action) { }
#endif
/*
* linux/kernel/irq/manage.c
*
* Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
*
* This file contains driver APIs to the irq subsystem.
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/interrupt.h>
#include "internals.h"
#ifdef CONFIG_SMP
/**
* synchronize_irq - wait for pending IRQ handlers (on other CPUs)
*
* This function waits for any pending IRQ handlers for this interrupt
* to complete before returning. If you use this function while
* holding a resource the IRQ handler may need you will deadlock.
*
* This function may be called - with care - from IRQ context.
*/
void synchronize_irq(unsigned int irq)
{
struct irq_desc *desc = irq_desc + irq;
while (desc->status & IRQ_INPROGRESS)
cpu_relax();
}
EXPORT_SYMBOL(synchronize_irq);
#endif
/**
* disable_irq_nosync - disable an irq without waiting
* @irq: Interrupt to disable
*
* Disable the selected interrupt line. Disables and Enables are
* nested.
* Unlike disable_irq(), this function does not ensure existing
* instances of the IRQ handler have completed before returning.
*
* This function may be called from IRQ context.
*/
void disable_irq_nosync(unsigned int irq)
{
irq_desc_t *desc = irq_desc + irq;
unsigned long flags;
spin_lock_irqsave(&desc->lock, flags);
if (!desc->depth++) {
desc->status |= IRQ_DISABLED;
desc->handler->disable(irq);
}
spin_unlock_irqrestore(&desc->lock, flags);
}
EXPORT_SYMBOL(disable_irq_nosync);
/**
* disable_irq - disable an irq and wait for completion
* @irq: Interrupt to disable
*
* Disable the selected interrupt line. Enables and Disables are
* nested.
* This function waits for any pending IRQ handlers for this interrupt
* to complete before returning. If you use this function while
* holding a resource the IRQ handler may need you will deadlock.
*
* This function may be called - with care - from IRQ context.
*/
void disable_irq(unsigned int irq)
{
irq_desc_t *desc = irq_desc + irq;
disable_irq_nosync(irq);
if (desc->action)
synchronize_irq(irq);
}
EXPORT_SYMBOL(disable_irq);
/**
* enable_irq - enable handling of an irq
* @irq: Interrupt to enable
*
* Undoes the effect of one call to disable_irq(). If this
* matches the last disable, processing of interrupts on this
* IRQ line is re-enabled.
*
* This function may be called from IRQ context.
*/
void enable_irq(unsigned int irq)
{
irq_desc_t *desc = irq_desc + irq;
unsigned long flags;
spin_lock_irqsave(&desc->lock, flags);
switch (desc->depth) {
case 0:
WARN_ON(1);
break;
case 1: {
unsigned int status = desc->status & ~IRQ_DISABLED;
desc->status = status;
if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
desc->status = status | IRQ_REPLAY;
hw_resend_irq(desc->handler,irq);
}
desc->handler->enable(irq);
/* fall-through */
}
default:
desc->depth--;
}
spin_unlock_irqrestore(&desc->lock, flags);
}
EXPORT_SYMBOL(enable_irq);
/*
* Internal function that tells the architecture code whether a
* particular irq has been exclusively allocated or is available
* for driver use.
*/
int can_request_irq(unsigned int irq, unsigned long irqflags)
{
struct irqaction *action;
if (irq >= NR_IRQS)
return 0;
action = irq_desc[irq].action;
if (action)
if (irqflags & action->flags & SA_SHIRQ)
action = NULL;
return !action;
}
/*
* Internal function to register an irqaction - typically used to
* allocate special interrupts that are part of the architecture.
*/
int setup_irq(unsigned int irq, struct irqaction * new)
{
struct irq_desc *desc = irq_desc + irq;
struct irqaction *old, **p;
unsigned long flags;
int shared = 0;
if (desc->handler == &no_irq_type)
return -ENOSYS;
/*
* Some drivers like serial.c use request_irq() heavily,
* so we have to be careful not to interfere with a
* running system.
*/
if (new->flags & SA_SAMPLE_RANDOM) {
/*
* This function might sleep, we want to call it first,
* outside of the atomic block.
* Yes, this might clear the entropy pool if the wrong
* driver is attempted to be loaded, without actually
* installing a new handler, but is this really a problem,
* only the sysadmin is able to do this.
*/
rand_initialize_irq(irq);
}
/*
* The following block of code has to be executed atomically
*/
spin_lock_irqsave(&desc->lock,flags);
p = &desc->action;
if ((old = *p) != NULL) {
/* Can't share interrupts unless both agree to */
if (!(old->flags & new->flags & SA_SHIRQ)) {
spin_unlock_irqrestore(&desc->lock,flags);
return -EBUSY;
}
/* add new interrupt at end of irq queue */
do {
p = &old->next;
old = *p;
} while (old);
shared = 1;
}
*p = new;
if (!shared) {
desc->depth = 0;
desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT |
IRQ_WAITING | IRQ_INPROGRESS);
if (desc->handler->startup)
desc->handler->startup(irq);
else
desc->handler->enable(irq);
}
spin_unlock_irqrestore(&desc->lock,flags);
new->irq = irq;
register_irq_proc(irq);
new->dir = NULL;
register_handler_proc(irq, new);
return 0;
}
/**
* free_irq - free an interrupt
* @irq: Interrupt line to free
* @dev_id: Device identity to free
*
* Remove an interrupt handler. The handler is removed and if the
* interrupt line is no longer in use by any driver it is disabled.
* On a shared IRQ the caller must ensure the interrupt is disabled
* on the card it drives before calling this function. The function
* does not return until any executing interrupts for this IRQ
* have completed.
*
* This function must not be called from interrupt context.
*/
void free_irq(unsigned int irq, void *dev_id)
{
struct irq_desc *desc;
struct irqaction **p;
unsigned long flags;
if (irq >= NR_IRQS)
return;
desc = irq_desc + irq;
spin_lock_irqsave(&desc->lock,flags);
p = &desc->action;
for (;;) {
struct irqaction * action = *p;
if (action) {
struct irqaction **pp = p;
p = &action->next;
if (action->dev_id != dev_id)
continue;
/* Found it - now remove it from the list of entries */
*pp = action->next;
if (!desc->action) {
desc->status |= IRQ_DISABLED;
if (desc->handler->shutdown)
desc->handler->shutdown(irq);
else
desc->handler->disable(irq);
}
spin_unlock_irqrestore(&desc->lock,flags);
unregister_handler_proc(irq, action);
/* Make sure it's not being used on another CPU */
synchronize_irq(irq);
kfree(action);
return;
}
printk(KERN_ERR "Trying to free free IRQ%d\n",irq);
spin_unlock_irqrestore(&desc->lock,flags);
return;
}
}
EXPORT_SYMBOL(free_irq);
/**
* request_irq - allocate an interrupt line
* @irq: Interrupt line to allocate
* @handler: Function to be called when the IRQ occurs
* @irqflags: Interrupt type flags
* @devname: An ascii name for the claiming device
* @dev_id: A cookie passed back to the handler function
*
* This call allocates interrupt resources and enables the
* interrupt line and IRQ handling. From the point this
* call is made your handler function may be invoked. Since
* your handler function must clear any interrupt the board
* raises, you must take care both to initialise your hardware
* and to set up the interrupt handler in the right order.
*
* Dev_id must be globally unique. Normally the address of the
* device data structure is used as the cookie. Since the handler
* receives this value it makes sense to use it.
*
* If your interrupt is shared you must pass a non NULL dev_id
* as this is required when freeing the interrupt.
*
* Flags:
*
* SA_SHIRQ Interrupt is shared
* SA_INTERRUPT Disable local interrupts while processing
* SA_SAMPLE_RANDOM The interrupt can be used for entropy
*
*/
int request_irq(unsigned int irq,
irqreturn_t (*handler)(int, void *, struct pt_regs *),
unsigned long irqflags, const char * devname, void *dev_id)
{
struct irqaction * action;
int retval;
/*
* Sanity-check: shared interrupts must pass in a real dev-ID,
* otherwise we'll have trouble later trying to figure out
* which interrupt is which (messes up the interrupt freeing
* logic etc).
*/
if ((irqflags & SA_SHIRQ) && !dev_id)
return -EINVAL;
if (irq >= NR_IRQS)
return -EINVAL;
if (!handler)
return -EINVAL;
action = kmalloc(sizeof(struct irqaction), GFP_ATOMIC);
if (!action)
return -ENOMEM;
action->handler = handler;
action->flags = irqflags;
cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
retval = setup_irq(irq, action);
if (retval)
kfree(action);
return retval;
}
EXPORT_SYMBOL(request_irq);
/*
* linux/kernel/irq/proc.c
*
* Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
*
* This file contains the /proc/irq/ handling code.
*/
#include <linux/irq.h>
#include <linux/proc_fs.h>
#include <linux/interrupt.h>
static struct proc_dir_entry *root_irq_dir, *irq_dir[NR_IRQS];
#ifdef CONFIG_SMP
/*
* The /proc/irq/<irq>/smp_affinity values:
*/
static struct proc_dir_entry *smp_affinity_entry[NR_IRQS];
cpumask_t irq_affinity[NR_IRQS] = { [0 ... NR_IRQS-1] = CPU_MASK_ALL };
static int irq_affinity_read_proc(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
int len = cpumask_scnprintf(page, count, irq_affinity[(long)data]);
if (count - len < 2)
return -EINVAL;
len += sprintf(page + len, "\n");
return len;
}
static int irq_affinity_write_proc(struct file *file, const char __user *buffer,
unsigned long count, void *data)
{
unsigned int irq = (int)(long)data, full_count = count, err;
cpumask_t new_value, tmp;
if (!irq_desc[irq].handler->set_affinity)
return -EIO;
err = cpumask_parse(buffer, count, new_value);
if (err)
return err;
/*
* Do not allow disabling IRQs completely - it's a too easy
* way to make the system unusable accidentally :-) At least
* one online CPU still has to be targeted.
*/
cpus_and(tmp, new_value, cpu_online_map);
if (cpus_empty(tmp))
return -EINVAL;
irq_affinity[irq] = new_value;
irq_desc[irq].handler->set_affinity(irq,
cpumask_of_cpu(first_cpu(new_value)));
return full_count;
}
#endif
#define MAX_NAMELEN 128
static int name_unique(unsigned int irq, struct irqaction *new_action)
{
struct irq_desc *desc = irq_desc + irq;
struct irqaction *action;
for (action = desc->action ; action; action = action->next)
if ((action != new_action) && action->name &&
!strcmp(new_action->name, action->name))
return 0;
return 1;
}
void register_handler_proc(unsigned int irq, struct irqaction *action)
{
char name [MAX_NAMELEN];
if (!irq_dir[irq] || action->dir || !action->name ||
!name_unique(irq, action))
return;
memset(name, 0, MAX_NAMELEN);
snprintf(name, MAX_NAMELEN, "%s", action->name);
/* create /proc/irq/1234/handler/ */
action->dir = proc_mkdir(name, irq_dir[irq]);
}
#undef MAX_NAMELEN
#define MAX_NAMELEN 10
void register_irq_proc(unsigned int irq)
{
char name [MAX_NAMELEN];
if (!root_irq_dir ||
(irq_desc[irq].handler == &no_irq_type) ||
irq_dir[irq])
return;
memset(name, 0, MAX_NAMELEN);
sprintf(name, "%d", irq);
/* create /proc/irq/1234 */
irq_dir[irq] = proc_mkdir(name, root_irq_dir);
#ifdef CONFIG_SMP
{
struct proc_dir_entry *entry;
/* create /proc/irq/<irq>/smp_affinity */
entry = create_proc_entry("smp_affinity", 0600, irq_dir[irq]);
if (entry) {
entry->nlink = 1;
entry->data = (void *)(long)irq;
entry->read_proc = irq_affinity_read_proc;
entry->write_proc = irq_affinity_write_proc;
}
smp_affinity_entry[irq] = entry;
}
#endif
}
#undef MAX_NAMELEN
void unregister_handler_proc(unsigned int irq, struct irqaction *action)
{
if (action->dir)
remove_proc_entry(action->dir->name, irq_dir[irq]);
}
void init_irq_proc(void)
{
int i;
/* create /proc/irq */
root_irq_dir = proc_mkdir("irq", NULL);
if (!root_irq_dir)
return;
/*
* Create entries for all existing IRQs.
*/
for (i = 0; i < NR_IRQS; i++)
register_irq_proc(i);
}
/*
* linux/kernel/irq/spurious.c
*
* Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
*
* This file contains spurious interrupt handling.
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/interrupt.h>
/*
* If 99,900 of the previous 100,000 interrupts have not been handled
* then assume that the IRQ is stuck in some manner. Drop a diagnostic
* and try to turn the IRQ off.
*
* (The other 100-of-100,000 interrupts may have been a correctly
* functioning device sharing an IRQ with the failing one)
*
* Called under desc->lock
*/
static void
__report_bad_irq(unsigned int irq, irq_desc_t *desc, irqreturn_t action_ret)
{
struct irqaction *action;
if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) {
printk(KERN_ERR "irq event %d: bogus return value %x\n",
irq, action_ret);
} else {
printk(KERN_ERR "irq %d: nobody cared!\n", irq);
}
dump_stack();
printk(KERN_ERR "handlers:\n");
action = desc->action;
while (action) {
printk(KERN_ERR "[<%p>]", action->handler);
print_symbol(" (%s)",
(unsigned long)action->handler);
printk("\n");
action = action->next;
}
}
void report_bad_irq(unsigned int irq, irq_desc_t *desc, irqreturn_t action_ret)
{
static int count = 100;
if (count > 0) {
count--;
__report_bad_irq(irq, desc, action_ret);
}
}
void note_interrupt(unsigned int irq, irq_desc_t *desc, irqreturn_t action_ret)
{
if (action_ret != IRQ_HANDLED) {
desc->irqs_unhandled++;
if (action_ret != IRQ_NONE)
report_bad_irq(irq, desc, action_ret);
}
desc->irq_count++;
if (desc->irq_count < 100000)
return;
desc->irq_count = 0;
if (desc->irqs_unhandled > 99900) {
/*
* The interrupt is stuck
*/
__report_bad_irq(irq, desc, action_ret);
/*
* Now kill the IRQ
*/
printk(KERN_EMERG "Disabling IRQ #%d\n", irq);
desc->status |= IRQ_DISABLED;
desc->handler->disable(irq);
}
desc->irqs_unhandled = 0;
}
int noirqdebug;
static int __init noirqdebug_setup(char *str)
{
noirqdebug = 1;
printk(KERN_INFO "IRQ lockup detection disabled\n");
return 1;
}
__setup("noirqdebug", noirqdebug_setup);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment