[PATCH] Final rio polish

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/char/Kconfig

@@ -291,7 +291,7 @@ config SX
 
 config RIO
 	tristate "Specialix RIO system support"
-	depends on SERIAL_NONSTANDARD && !64BIT
+	depends on SERIAL_NONSTANDARD
 	help
 	  This is a driver for the Specialix RIO, a smart serial card which
 	  drives an outboard box that can support up to 128 ports.  Product

drivers/char/rio/host.h

@@ -33,12 +33,6 @@
 #ifndef __rio_host_h__
 #define __rio_host_h__
 
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_host_h_sccs_ = "@(#)host.h	1.2";
-#endif
-#endif
-
 /*
 ** the host structure - one per host card in the system.
 */
@@ -77,9 +71,6 @@ struct Host {
 #define RC_STARTUP            1
 #define RC_RUNNING            2
 #define RC_STUFFED            3
-#define RC_SOMETHING          4
-#define RC_SOMETHING_NEW      5
-#define RC_SOMETHING_ELSE     6
 #define RC_READY              7
 #define RUN_STATE             7
 /*

drivers/char/rio/rioboot.c

@@ -34,6 +34,7 @@
 #include <linux/slab.h>
 #include <linux/termios.h>
 #include <linux/serial.h>
+#include <linux/vmalloc.h>
 #include <asm/semaphore.h>
 #include <linux/generic_serial.h>
 #include <linux/errno.h>

drivers/char/rio/rioctrl.c

@@ -1394,14 +1394,17 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 		return RIO_FAIL;
 	}
 
-	if (((int) ((char) PortP->InUse) == -1) || !(CmdBlkP = RIOGetCmdBlk())) {
-		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block for command %d on port %d\n", Cmd, PortP->PortNum);
+	if ((PortP->InUse == (typeof(PortP->InUse))-1) ||
+			!(CmdBlkP = RIOGetCmdBlk())) {
+		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block "
+			"for command %d on port %d\n", Cmd, PortP->PortNum);
 		return RIO_FAIL;
 	}
 
-	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", CmdBlkP, PortP->InUse);
+	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n",
+			CmdBlkP, PortP->InUse);
 
-	PktCmdP = (struct PktCmd_M *) &CmdBlkP->Packet.data[0];
+	PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0];
 
 	CmdBlkP->Packet.src_unit = 0;
 	if (PortP->SecondBlock)
@@ -1425,38 +1428,46 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 
 	switch (Cmd) {
 	case MEMDUMP:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p (addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p "
+				"(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
 		PktCmdP->SubCommand = MEMDUMP;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case FCLOSE:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n",
+				CmdBlkP);
 		break;
 	case READ_REGISTER:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) "
+				"command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
 		PktCmdP->SubCommand = READ_REGISTER;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case RESUME:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n",
+				CmdBlkP);
 		break;
 	case RFLUSH:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n",
+				CmdBlkP);
 		CmdBlkP->PostFuncP = RIORFlushEnable;
 		break;
 	case SUSPEND:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n",
+				CmdBlkP);
 		break;
 
 	case MGET:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n",
+				CmdBlkP);
 		break;
 
 	case MSET:
 	case MBIC:
 	case MBIS:
 		CmdBlkP->Packet.data[4] = (char) PortP->ModemLines;
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command "
+				"blk %p\n", CmdBlkP);
 		break;
 
 	case WFLUSH:
@@ -1465,12 +1476,14 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 		 ** allowed then we should not bother sending any more to the
 		 ** RTA.
 		 */
-		if ((int) ((char) PortP->WflushFlag) == (int) -1) {
-			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, WflushFlag about to wrap!");
+		if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) {
+			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, "
+					"WflushFlag about to wrap!");
 			RIOFreeCmdBlk(CmdBlkP);
 			return (RIO_FAIL);
 		} else {
-			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command blk %p\n", CmdBlkP);
+			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command "
+					"blk %p\n", CmdBlkP);
 			CmdBlkP->PostFuncP = RIOWFlushMark;
 		}
 		break;

drivers/char/rio/rioioctl.h

@@ -33,10 +33,6 @@
 #ifndef	__rioioctl_h__
 #define	__rioioctl_h__
 
-#ifdef SCCS_LABELS
-static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
-#endif
-
 /*
 ** RIO device driver - user ioctls and associated structures.
 */
@@ -44,55 +40,13 @@ static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
 struct portStats {
 	int port;
 	int gather;
-	ulong txchars;
-	ulong rxchars;
-	ulong opens;
-	ulong closes;
-	ulong ioctls;
+	unsigned long txchars;
+	unsigned long rxchars;
+	unsigned long opens;
+	unsigned long closes;
+	unsigned long ioctls;
 };
 
-
-#define rIOC	('r'<<8)
-#define	TCRIOSTATE	(rIOC | 1)
-#define	TCRIOXPON	(rIOC | 2)
-#define	TCRIOXPOFF	(rIOC | 3)
-#define	TCRIOXPCPS	(rIOC | 4)
-#define	TCRIOXPRINT	(rIOC | 5)
-#define TCRIOIXANYON	(rIOC | 6)
-#define	TCRIOIXANYOFF	(rIOC | 7)
-#define TCRIOIXONON	(rIOC | 8)
-#define	TCRIOIXONOFF	(rIOC | 9)
-#define	TCRIOMBIS	(rIOC | 10)
-#define	TCRIOMBIC	(rIOC | 11)
-#define	TCRIOTRIAD	(rIOC | 12)
-#define TCRIOTSTATE	(rIOC | 13)
-
-/*
-** 15.10.1998 ARG - ESIL 0761 part fix
-** Add RIO ioctls for manipulating RTS and CTS flow control, (as LynxOS
-** appears to not support hardware flow control).
-*/
-#define TCRIOCTSFLOWEN	(rIOC | 14)	/* enable CTS flow control */
-#define TCRIOCTSFLOWDIS	(rIOC | 15)	/* disable CTS flow control */
-#define TCRIORTSFLOWEN	(rIOC | 16)	/* enable RTS flow control */
-#define TCRIORTSFLOWDIS	(rIOC | 17)	/* disable RTS flow control */
-
-/*
-** 09.12.1998 ARG - ESIL 0776 part fix
-** Definition for 'RIOC' also appears in daemon.h, so we'd better do a
-** #ifndef here first.
-** 'RIO_QUICK_CHECK' also #define'd here as this ioctl is now
-** allowed to be used by customers.
-**
-** 05.02.1999 ARG -
-** This is what I've decied to do with ioctls etc., which are intended to be
-** invoked from users applications :
-** Anything that needs to be defined here will be removed from daemon.h, that
-** way it won't end up having to be defined/maintained in two places. The only
-** consequence of this is that this file should now be #include'd by daemon.h
-**
-** 'stats' ioctls now #define'd here as they are to be used by customers.
-*/
 #define	RIOC	('R'<<8)|('i'<<16)|('o'<<24)
 
 #define	RIO_QUICK_CHECK	  	(RIOC | 105)