Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
Please pull this batch of updates intended for the 3.17 stream...

This is primarily a Bluetooth pull.  Gustavo says:

"A lot of patches to 3.17. The bulk of changes here are for LE support.
The 6loWPAN over Bluetooth now has it own module, we also have support for
background auto-connection and passive scanning, Bluetooth device address
provisioning, support for reading Bluetooth clock values and LE connection
parameters plus many many fixes."

The balance is just a pull of the wireless.git tree, to avoid some
pending merge problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/bluetooth/ath3k.c

@@ -90,7 +90,6 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0b05, 0x17d0) },
 	{ USB_DEVICE(0x0CF3, 0x0036) },
 	{ USB_DEVICE(0x0CF3, 0x3004) },
-	{ USB_DEVICE(0x0CF3, 0x3005) },
 	{ USB_DEVICE(0x0CF3, 0x3008) },
 	{ USB_DEVICE(0x0CF3, 0x311D) },
 	{ USB_DEVICE(0x0CF3, 0x311E) },
@@ -104,6 +103,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3375) },
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x13d3, 0x3402) },
+	{ USB_DEVICE(0x13d3, 0x3432) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -140,7 +140,6 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
-	{ USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
@@ -154,6 +153,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
@@ -290,10 +290,10 @@ static int ath3k_load_fwfile(struct usb_device *udev,
 	sent += size;
 	count -= size;
 
-	while (count) {
-		size = min_t(uint, count, BULK_SIZE);
 	pipe = usb_sndbulkpipe(udev, 0x02);
 
+	while (count) {
+		size = min_t(uint, count, BULK_SIZE);
 		memcpy(send_buf, firmware->data + sent, size);
 
 		err = usb_bulk_msg(udev, pipe, send_buf, size,

drivers/bluetooth/btmrvl_drv.h

@@ -68,6 +68,7 @@ struct btmrvl_adapter {
 	u8 hs_state;
 	u8 wakeup_tries;
 	wait_queue_head_t cmd_wait_q;
+	wait_queue_head_t event_hs_wait_q;
 	u8 cmd_complete;
 	bool is_suspended;
 };
@@ -89,6 +90,7 @@ struct btmrvl_private {
 #define MRVL_VENDOR_PKT			0xFE
 
 /* Vendor specific Bluetooth commands */
+#define BT_CMD_PSCAN_WIN_REPORT_ENABLE	0xFC03
 #define BT_CMD_AUTO_SLEEP_MODE		0xFC23
 #define BT_CMD_HOST_SLEEP_CONFIG	0xFC59
 #define BT_CMD_HOST_SLEEP_ENABLE	0xFC5A
@@ -143,6 +145,7 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
 int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
 
 int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd);
+int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd);
 int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv);
 int btmrvl_enable_ps(struct btmrvl_private *priv);
 int btmrvl_prepare_command(struct btmrvl_private *priv);

drivers/bluetooth/btmrvl_main.c

@@ -114,6 +114,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 			adapter->hs_state = HS_ACTIVATED;
 			if (adapter->psmode)
 				adapter->ps_state = PS_SLEEP;
+			wake_up_interruptible(&adapter->event_hs_wait_q);
 			BT_DBG("HS ACTIVATED!");
 		} else {
 			BT_DBG("HS Enable failed");
@@ -214,6 +215,23 @@ int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd)
 }
 EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
 
+int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret;
+
+	if (!card->support_pscan_win_report)
+		return 0;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_PSCAN_WIN_REPORT_ENABLE,
+				   &subcmd, 1);
+	if (ret)
+		BT_ERR("PSCAN_WIN_REPORT_ENABLE command failed: %#x", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_pscan_window_reporting);
+
 int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv)
 {
 	int ret;
@@ -253,11 +271,31 @@ EXPORT_SYMBOL_GPL(btmrvl_enable_ps);
 
 int btmrvl_enable_hs(struct btmrvl_private *priv)
 {
+	struct btmrvl_adapter *adapter = priv->adapter;
 	int ret;
 
 	ret = btmrvl_send_sync_cmd(priv, BT_CMD_HOST_SLEEP_ENABLE, NULL, 0);
-	if (ret)
+	if (ret) {
 		BT_ERR("Host sleep enable command failed\n");
+		return ret;
+	}
+
+	ret = wait_event_interruptible_timeout(adapter->event_hs_wait_q,
+					       adapter->hs_state,
+			msecs_to_jiffies(WAIT_UNTIL_HS_STATE_CHANGED));
+	if (ret < 0) {
+		BT_ERR("event_hs_wait_q terminated (%d): %d,%d,%d",
+		       ret, adapter->hs_state, adapter->ps_state,
+		       adapter->wakeup_tries);
+	} else if (!ret) {
+		BT_ERR("hs_enable timeout: %d,%d,%d", adapter->hs_state,
+		       adapter->ps_state, adapter->wakeup_tries);
+		ret = -ETIMEDOUT;
+	} else {
+		BT_DBG("host sleep enabled: %d,%d,%d", adapter->hs_state,
+		       adapter->ps_state, adapter->wakeup_tries);
+		ret = 0;
+	}
 
 	return ret;
 }
@@ -358,6 +396,7 @@ static void btmrvl_init_adapter(struct btmrvl_private *priv)
 	}
 
 	init_waitqueue_head(&priv->adapter->cmd_wait_q);
+	init_waitqueue_head(&priv->adapter->event_hs_wait_q);
 }
 
 static void btmrvl_free_adapter(struct btmrvl_private *priv)
@@ -489,6 +528,8 @@ static int btmrvl_setup(struct hci_dev *hdev)
 
 	btmrvl_cal_data_dt(priv);
 
+	btmrvl_pscan_window_reporting(priv, 0x01);
+
 	priv->btmrvl_dev.psmode = 1;
 	btmrvl_enable_ps(priv);
 
@@ -666,6 +707,7 @@ int btmrvl_remove_card(struct btmrvl_private *priv)
 	hdev = priv->btmrvl_dev.hcidev;
 
 	wake_up_interruptible(&priv->adapter->cmd_wait_q);
+	wake_up_interruptible(&priv->adapter->event_hs_wait_q);
 
 	kthread_stop(priv->main_thread.task);
 

drivers/bluetooth/btmrvl_sdio.c

@@ -108,6 +108,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
 	.reg		= &btmrvl_reg_8688,
+	.support_pscan_win_report = false,
 	.sd_blksz_fw_dl	= 64,
 };
 
@@ -115,6 +116,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8787_uapsta.bin",
 	.reg		= &btmrvl_reg_87xx,
+	.support_pscan_win_report = false,
 	.sd_blksz_fw_dl	= 256,
 };
 
@@ -122,6 +124,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8797_uapsta.bin",
 	.reg		= &btmrvl_reg_87xx,
+	.support_pscan_win_report = false,
 	.sd_blksz_fw_dl	= 256,
 };
 
@@ -129,6 +132,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8897_uapsta.bin",
 	.reg		= &btmrvl_reg_88xx,
+	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl	= 256,
 };
 
@@ -1067,6 +1071,7 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 		card->firmware = data->firmware;
 		card->reg = data->reg;
 		card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
+		card->support_pscan_win_report = data->support_pscan_win_report;
 	}
 
 	if (btmrvl_sdio_register_dev(card) < 0) {

drivers/bluetooth/btmrvl_sdio.h

@@ -89,6 +89,7 @@ struct btmrvl_sdio_card {
 	const char *helper;
 	const char *firmware;
 	const struct btmrvl_sdio_card_reg *reg;
+	bool support_pscan_win_report;
 	u16 sd_blksz_fw_dl;
 	u8 rx_unit;
 	struct btmrvl_private *priv;
@@ -98,6 +99,7 @@ struct btmrvl_sdio_device {
 	const char *helper;
 	const char *firmware;
 	const struct btmrvl_sdio_card_reg *reg;
+	const bool support_pscan_win_report;
 	u16 sd_blksz_fw_dl;
 };
 

drivers/bluetooth/btusb.c

@@ -30,9 +30,6 @@
 
 #define VERSION "0.6"
 
-static bool ignore_dga;
-static bool ignore_csr;
-static bool ignore_sniffer;
 static bool disable_scofix;
 static bool force_scofix;
 
@@ -49,7 +46,8 @@ static struct usb_driver btusb_driver;
 #define BTUSB_WRONG_SCO_MTU	0x40
 #define BTUSB_ATH3012		0x80
 #define BTUSB_INTEL		0x100
-#define BTUSB_BCM_PATCHRAM	0x200
+#define BTUSB_INTEL_BOOT	0x200
+#define BTUSB_BCM_PATCHRAM	0x400
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -121,6 +119,10 @@ static const struct usb_device_id btusb_table[] = {
 	/* IMC Networks - Broadcom based */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01) },
 
+	/* Intel Bluetooth USB Bootloader (RAM module) */
+	{ USB_DEVICE(0x8087, 0x0a5a),
+	  .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
+
 	{ }	/* Terminating entry */
 };
 
@@ -162,7 +164,6 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
-	{ USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
@@ -176,6 +177,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -229,10 +231,12 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
 
 	/* CSR BlueCore Bluetooth Sniffer */
-	{ USB_DEVICE(0x0a12, 0x0002), .driver_info = BTUSB_SNIFFER },
+	{ USB_DEVICE(0x0a12, 0x0002),
+	  .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
 
 	/* Frontline ComProbe Bluetooth Sniffer */
-	{ USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER },
+	{ USB_DEVICE(0x16d3, 0x0002),
+	  .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
 
 	/* Intel Bluetooth device */
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
@@ -1183,6 +1187,51 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
 	return 0;
 }
 
+#define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
+
+static int btusb_check_bdaddr_intel(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct hci_rp_read_bd_addr *rp;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s reading Intel device address failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*rp)) {
+		BT_ERR("%s Intel device address length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	rp = (struct hci_rp_read_bd_addr *) skb->data;
+	if (rp->status) {
+		BT_ERR("%s Intel device address result failed (%02x)",
+		       hdev->name, rp->status);
+		kfree_skb(skb);
+		return -bt_to_errno(rp->status);
+	}
+
+	/* For some Intel based controllers, the default Bluetooth device
+	 * address 00:03:19:9E:8B:00 can be found. These controllers are
+	 * fully operational, but have the danger of duplicate addresses
+	 * and that in turn can cause problems with Bluetooth operation.
+	 */
+	if (!bacmp(&rp->bdaddr, BDADDR_INTEL)) {
+		BT_ERR("%s found Intel default device address (%pMR)",
+		       hdev->name, &rp->bdaddr);
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
 static int btusb_setup_intel(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -1255,6 +1304,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 		BT_INFO("%s: Intel device is already patched. patch num: %02x",
 			hdev->name, ver->fw_patch_num);
 		kfree_skb(skb);
+		btusb_check_bdaddr_intel(hdev);
 		return 0;
 	}
 
@@ -1267,6 +1317,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	fw = btusb_setup_intel_get_fw(hdev, ver);
 	if (!fw) {
 		kfree_skb(skb);
+		btusb_check_bdaddr_intel(hdev);
 		return 0;
 	}
 	fw_ptr = fw->data;
@@ -1346,6 +1397,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
 		hdev->name);
 
+	btusb_check_bdaddr_intel(hdev);
 	return 0;
 
 exit_mfg_disable:
@@ -1360,6 +1412,8 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	kfree_skb(skb);
 
 	BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
+
+	btusb_check_bdaddr_intel(hdev);
 	return 0;
 
 exit_mfg_deactivate:
@@ -1380,9 +1434,29 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
 		hdev->name);
 
+	btusb_check_bdaddr_intel(hdev);
+	return 0;
+}
+
+static int btusb_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	long ret;
+
+	skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		BT_ERR("%s: changing Intel device address failed (%ld)",
+			hdev->name, ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
 	return 0;
 }
 
+#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
+
 static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -1396,6 +1470,7 @@ static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
 	u16 opcode;
 	struct sk_buff *skb;
 	struct hci_rp_read_local_version *ver;
+	struct hci_rp_read_bd_addr *bda;
 	long ret;
 
 	snprintf(fw_name, sizeof(fw_name), "brcm/%s-%04x-%04x.hcd",
@@ -1405,8 +1480,7 @@ static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
 
 	ret = request_firmware(&fw, fw_name, &hdev->dev);
 	if (ret < 0) {
-		BT_INFO("%s: BCM: patch %s not found", hdev->name,
-			fw_name);
+		BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
 		return 0;
 	}
 
@@ -1525,12 +1599,67 @@ static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
 		ver->lmp_ver, ver->lmp_subver);
 	kfree_skb(skb);
 
+	/* Read BD Address */
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		BT_ERR("%s: HCI_OP_READ_BD_ADDR failed (%ld)",
+			hdev->name, ret);
+		goto done;
+	}
+
+	if (skb->len != sizeof(*bda)) {
+		BT_ERR("%s: HCI_OP_READ_BD_ADDR event length mismatch",
+			hdev->name);
+		kfree_skb(skb);
+		ret = -EIO;
+		goto done;
+	}
+
+	bda = (struct hci_rp_read_bd_addr *) skb->data;
+	if (bda->status) {
+		BT_ERR("%s: HCI_OP_READ_BD_ADDR error status (%02x)",
+		       hdev->name, bda->status);
+		kfree_skb(skb);
+		ret = -bt_to_errno(bda->status);
+		goto done;
+	}
+
+	/* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
+	 * with no configured address.
+	 */
+	if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) {
+		BT_INFO("%s: BCM: using default device address (%pMR)",
+			hdev->name, &bda->bdaddr);
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	kfree_skb(skb);
+
 done:
 	release_firmware(fw);
 
 	return ret;
 }
 
+static int btusb_set_bdaddr_bcm(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	long ret;
+
+	skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Change address command failed (%ld)",
+			hdev->name, ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
 static int btusb_probe(struct usb_interface *intf,
 				const struct usb_device_id *id)
 {
@@ -1555,15 +1684,6 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info == BTUSB_IGNORE)
 		return -ENODEV;
 
-	if (ignore_dga && id->driver_info & BTUSB_DIGIANSWER)
-		return -ENODEV;
-
-	if (ignore_csr && id->driver_info & BTUSB_CSR)
-		return -ENODEV;
-
-	if (ignore_sniffer && id->driver_info & BTUSB_SNIFFER)
-		return -ENODEV;
-
 	if (id->driver_info & BTUSB_ATH3012) {
 		struct usb_device *udev = interface_to_usbdev(intf);
 
@@ -1636,11 +1756,18 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_BCM92035)
 		hdev->setup = btusb_setup_bcm92035;
 
-	if (id->driver_info & BTUSB_BCM_PATCHRAM)
+	if (id->driver_info & BTUSB_BCM_PATCHRAM) {
 		hdev->setup = btusb_setup_bcm_patchram;
+		hdev->set_bdaddr = btusb_set_bdaddr_bcm;
+	}
 
-	if (id->driver_info & BTUSB_INTEL)
+	if (id->driver_info & BTUSB_INTEL) {
 		hdev->setup = btusb_setup_intel;
+		hdev->set_bdaddr = btusb_set_bdaddr_intel;
+	}
+
+	if (id->driver_info & BTUSB_INTEL_BOOT)
+		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
 
 	/* Interface numbers are hardcoded in the specification */
 	data->isoc = usb_ifnum_to_if(data->udev, 1);
@@ -1680,8 +1807,18 @@ static int btusb_probe(struct usb_interface *intf,
 		/* New sniffer firmware has crippled HCI interface */
 		if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
 			set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+	}
 
-		data->isoc = NULL;
+	if (id->driver_info & BTUSB_INTEL_BOOT) {
+		/* A bug in the bootloader causes that interrupt interface is
+		 * only enabled after receiving SetInterface(0, AltSetting=0).
+		 */
+		err = usb_set_interface(data->udev, 0, 0);
+		if (err < 0) {
+			BT_ERR("failed to set interface 0, alt 0 %d", err);
+			hci_free_dev(hdev);
+			return err;
+		}
 	}
 
 	if (data->isoc) {
@@ -1846,15 +1983,6 @@ static struct usb_driver btusb_driver = {
 
 module_usb_driver(btusb_driver);
 
-module_param(ignore_dga, bool, 0644);
-MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001");
-
-module_param(ignore_csr, bool, 0644);
-MODULE_PARM_DESC(ignore_csr, "Ignore devices with id 0a12:0001");
-
-module_param(ignore_sniffer, bool, 0644);
-MODULE_PARM_DESC(ignore_sniffer, "Ignore devices with id 0a12:0002");
-
 module_param(disable_scofix, bool, 0644);
 MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
 

drivers/bluetooth/hci_h5.c

@@ -355,10 +355,7 @@ static void h5_complete_rx_pkt(struct hci_uart *hu)
 
 static int h5_rx_crc(struct hci_uart *hu, unsigned char c)
 {
-	struct h5 *h5 = hu->priv;
-
 	h5_complete_rx_pkt(hu);
-	h5_reset_rx(h5);
 
 	return 0;
 }
@@ -373,7 +370,6 @@ static int h5_rx_payload(struct hci_uart *hu, unsigned char c)
 		h5->rx_pending = 2;
 	} else {
 		h5_complete_rx_pkt(hu);
-		h5_reset_rx(h5);
 	}
 
 	return 0;
@@ -406,6 +402,7 @@ static int h5_rx_3wire_hdr(struct hci_uart *hu, unsigned char c)
 	    H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) {
 		BT_ERR("Non-link packet received in non-active state");
 		h5_reset_rx(h5);
+		return 0;
 	}
 
 	h5->rx_func = h5_rx_payload;

drivers/bluetooth/hci_vhci.c

@@ -40,7 +40,7 @@
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
-#define VERSION "1.4"
+#define VERSION "1.5"
 
 static bool amp;
 
@@ -95,10 +95,21 @@ static int vhci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 	return 0;
 }
 
-static int vhci_create_device(struct vhci_data *data, __u8 dev_type)
+static int vhci_create_device(struct vhci_data *data, __u8 opcode)
 {
 	struct hci_dev *hdev;
 	struct sk_buff *skb;
+	__u8 dev_type;
+
+	/* bits 0-1 are dev_type (BR/EDR or AMP) */
+	dev_type = opcode & 0x03;
+
+	if (dev_type != HCI_BREDR && dev_type != HCI_AMP)
+		return -EINVAL;
+
+	/* bits 2-5 are reserved (must be zero) */
+	if (opcode & 0x3c)
+		return -EINVAL;
 
 	skb = bt_skb_alloc(4, GFP_KERNEL);
 	if (!skb)
@@ -121,6 +132,14 @@ static int vhci_create_device(struct vhci_data *data, __u8 dev_type)
 	hdev->flush = vhci_flush;
 	hdev->send  = vhci_send_frame;
 
+	/* bit 6 is for external configuration */
+	if (opcode & 0x40)
+		set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks);
+
+	/* bit 7 is for raw device */
+	if (opcode & 0x80)
+		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
 	if (hci_register_dev(hdev) < 0) {
 		BT_ERR("Can't register HCI device");
 		hci_free_dev(hdev);
@@ -132,7 +151,7 @@ static int vhci_create_device(struct vhci_data *data, __u8 dev_type)
 	bt_cb(skb)->pkt_type = HCI_VENDOR_PKT;
 
 	*skb_put(skb, 1) = 0xff;
-	*skb_put(skb, 1) = dev_type;
+	*skb_put(skb, 1) = opcode;
 	put_unaligned_le16(hdev->id, skb_put(skb, 2));
 	skb_queue_tail(&data->readq, skb);
 
@@ -146,7 +165,7 @@ static inline ssize_t vhci_get_user(struct vhci_data *data,
 {
 	size_t len = iov_length(iov, count);
 	struct sk_buff *skb;
-	__u8 pkt_type, dev_type;
+	__u8 pkt_type, opcode;
 	unsigned long i;
 	int ret;
 
@@ -190,7 +209,7 @@ static inline ssize_t vhci_get_user(struct vhci_data *data,
 
 		cancel_delayed_work_sync(&data->open_timeout);
 
-		dev_type = *((__u8 *) skb->data);
+		opcode = *((__u8 *) skb->data);
 		skb_pull(skb, 1);
 
 		if (skb->len > 0) {
@@ -200,10 +219,7 @@ static inline ssize_t vhci_get_user(struct vhci_data *data,
 
 		kfree_skb(skb);
 
-		if (dev_type != HCI_BREDR && dev_type != HCI_AMP)
-			return -EINVAL;
-
-		ret = vhci_create_device(data, dev_type);
+		ret = vhci_create_device(data, opcode);
 		break;
 
 	default:

drivers/net/wireless/ath/ath10k/core.c

@@ -795,7 +795,11 @@ int ath10k_core_start(struct ath10k *ar)
 	if (status)
 		goto err_htc_stop;
 
+	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+		ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1;
+	else
 		ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+
 	INIT_LIST_HEAD(&ar->arvifs);
 
 	if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))

drivers/net/wireless/ath/ath10k/htt_rx.c

@@ -312,7 +312,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 	int msdu_len, msdu_chaining = 0;
 	struct sk_buff *msdu;
 	struct htt_rx_desc *rx_desc;
-	bool corrupted = false;
 
 	lockdep_assert_held(&htt->rx_ring.lock);
 
@@ -439,9 +438,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 		last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
 				RX_MSDU_END_INFO0_LAST_MSDU;
 
-		if (msdu_chaining && !last_msdu)
-			corrupted = true;
-
 		if (last_msdu) {
 			msdu->next = NULL;
 			break;
@@ -456,20 +452,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 	if (*head_msdu == NULL)
 		msdu_chaining = -1;
 
-	/*
-	 * Apparently FW sometimes reports weird chained MSDU sequences with
-	 * more than one rx descriptor. This seems like a bug but needs more
-	 * analyzing. For the time being fix it by dropping such sequences to
-	 * avoid blowing up the host system.
-	 */
-	if (corrupted) {
-		ath10k_warn("failed to pop chained msdus, dropping\n");
-		ath10k_htt_rx_free_msdu_chain(*head_msdu);
-		*head_msdu = NULL;
-		*tail_msdu = NULL;
-		msdu_chaining = -EINVAL;
-	}
-
 	/*
 	 * Don't refill the ring yet.
 	 *

drivers/net/wireless/brcm80211/brcmfmac/usb.c

@@ -1183,8 +1183,6 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 	bus->bus_priv.usb = bus_pub;
 	dev_set_drvdata(dev, bus);
 	bus->ops = &brcmf_usb_bus_ops;
-	bus->chip = bus_pub->devid;
-	bus->chiprev = bus_pub->chiprev;
 	bus->proto_type = BRCMF_PROTO_BCDC;
 	bus->always_use_fws_queue = true;
 
@@ -1193,6 +1191,9 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 		if (ret)
 			goto fail;
 	}
+	bus->chip = bus_pub->devid;
+	bus->chiprev = bus_pub->chiprev;
+
 	/* request firmware here */
 	brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
 			       brcmf_usb_probe_phase2);

drivers/net/wireless/mwifiex/11n_aggr.c

@@ -185,6 +185,7 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
 	skb_reserve(skb_aggr, headroom + sizeof(struct txpd));
 	tx_info_aggr =  MWIFIEX_SKB_TXCB(skb_aggr);
 
+	memset(tx_info_aggr, 0, sizeof(*tx_info_aggr));
 	tx_info_aggr->bss_type = tx_info_src->bss_type;
 	tx_info_aggr->bss_num = tx_info_src->bss_num;
 

drivers/net/wireless/mwifiex/cfg80211.c

@@ -188,6 +188,7 @@ mwifiex_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 	}
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->pkt_len = pkt_len;

drivers/net/wireless/mwifiex/cmdevt.c

@@ -462,6 +462,7 @@ int mwifiex_process_event(struct mwifiex_adapter *adapter)
 
 	if (skb) {
 		rx_info = MWIFIEX_SKB_RXCB(skb);
+		memset(rx_info, 0, sizeof(*rx_info));
 		rx_info->bss_num = priv->bss_num;
 		rx_info->bss_type = priv->bss_type;
 	}

drivers/net/wireless/mwifiex/main.c

@@ -644,6 +644,7 @@ mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->pkt_len = skb->len;

drivers/net/wireless/mwifiex/sta_tx.c

@@ -150,6 +150,7 @@ int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags)
 		return -1;
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->pkt_len = data_len - (sizeof(struct txpd) + INTF_HEADER_LEN);

drivers/net/wireless/mwifiex/tdls.c

@@ -604,6 +604,7 @@ int mwifiex_send_tdls_data_frame(struct mwifiex_private *priv, const u8 *peer,
 	}
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 
@@ -757,6 +758,7 @@ int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv, const u8 *peer,
 	skb->priority = MWIFIEX_PRIO_VI;
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT;

drivers/net/wireless/mwifiex/txrx.c

@@ -55,6 +55,7 @@ int mwifiex_handle_rx_packet(struct mwifiex_adapter *adapter,
 		return -1;
 	}
 
+	memset(rx_info, 0, sizeof(*rx_info));
 	rx_info->bss_num = priv->bss_num;
 	rx_info->bss_type = priv->bss_type;
 

drivers/net/wireless/mwifiex/uap_txrx.c

@@ -174,6 +174,7 @@ static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv,
 	}
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->flags |= MWIFIEX_BUF_FLAG_BRIDGED_PKT;

drivers/net/wireless/rt2x00/rt2800usb.c

@@ -231,9 +231,12 @@ static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer)
  */
 static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev)
 {
-	__le32 reg;
+	__le32 *reg;
 	u32 fw_mode;
 
+	reg = kmalloc(sizeof(*reg), GFP_KERNEL);
+	if (reg == NULL)
+		return -ENOMEM;
 	/* cannot use rt2x00usb_register_read here as it uses different
 	 * mode (MULTI_READ vs. DEVICE_MODE) and does not pass the
 	 * magic value USB_MODE_AUTORUN (0x11) to the device, thus the
@@ -241,8 +244,9 @@ static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE,
 				 USB_VENDOR_REQUEST_IN, 0, USB_MODE_AUTORUN,
-				 &reg, sizeof(reg), REGISTER_TIMEOUT_FIRMWARE);
-	fw_mode = le32_to_cpu(reg);
+				 reg, sizeof(*reg), REGISTER_TIMEOUT_FIRMWARE);
+	fw_mode = le32_to_cpu(*reg);
+	kfree(reg);
 
 	if ((fw_mode & 0x00000003) == 2)
 		return 1;
@@ -261,6 +265,7 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 	int status;
 	u32 offset;
 	u32 length;
+	int retval;
 
 	/*
 	 * Check which section of the firmware we need.
@@ -278,7 +283,10 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Write firmware to device.
 	 */
-	if (rt2800usb_autorun_detect(rt2x00dev)) {
+	retval = rt2800usb_autorun_detect(rt2x00dev);
+	if (retval < 0)
+		return retval;
+	if (retval) {
 		rt2x00_info(rt2x00dev,
 			    "Firmware loading not required - NIC in AutoRun mode\n");
 	} else {
@@ -763,7 +771,12 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
  */
 static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev)
 {
-	if (rt2800usb_autorun_detect(rt2x00dev))
+	int retval;
+
+	retval = rt2800usb_autorun_detect(rt2x00dev);
+	if (retval < 0)
+		return retval;
+	if (retval)
 		return 1;
 	return rt2800_efuse_detect(rt2x00dev);
 }
@@ -772,7 +785,10 @@ static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
 
-	if (rt2800usb_efuse_detect(rt2x00dev))
+	retval = rt2800usb_efuse_detect(rt2x00dev);
+	if (retval < 0)
+		return retval;
+	if (retval)
 		retval = rt2800_read_eeprom_efuse(rt2x00dev);
 	else
 		retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,

include/net/bluetooth/bluetooth.h

@@ -260,7 +260,7 @@ struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock);
 
 /* Skb helpers */
 struct l2cap_ctrl {
-	unsigned int	sframe:1,
+	__u8	sframe:1,
 		poll:1,
 		final:1,
 		fcs:1,

include/net/bluetooth/hci.h

@@ -81,10 +81,54 @@
 
 /* HCI device quirks */
 enum {
+	/* When this quirk is set, the HCI Reset command is send when
+	 * closing the transport instead of when opening it.
+	 *
+	 * This quirk must be set before hci_register_dev is called.
+	 */
 	HCI_QUIRK_RESET_ON_CLOSE,
+
+	/* When this quirk is set, the device is turned into a raw-only
+	 * device and it will stay in unconfigured state.
+	 *
+	 * This quirk must be set before hci_register_dev is called.
+	 */
 	HCI_QUIRK_RAW_DEVICE,
+
+	/* When this quirk is set, the buffer sizes reported by
+	 * HCI Read Buffer Size command are corrected if invalid.
+	 *
+	 * This quirk must be set before hci_register_dev is called.
+	 */
 	HCI_QUIRK_FIXUP_BUFFER_SIZE,
+
+	/* When this quirk is set, then no stored link key handling
+	 * is performed. This is mainly due to the fact that the
+	 * HCI Delete Stored Link Key command is advertised, but
+	 * not supported.
+	 *
+	 * This quirk must be set before hci_register_dev is called.
+	 */
 	HCI_QUIRK_BROKEN_STORED_LINK_KEY,
+
+	/* When this quirk is set, an external configuration step
+	 * is required and will be indicated with the controller
+	 * configuation.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_EXTERNAL_CONFIG,
+
+	/* When this quirk is set, the public Bluetooth address
+	 * initially reported by HCI Read BD Address command
+	 * is considered invalid. Controller configuration is
+	 * required before this device can be used.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_INVALID_BDADDR,
 };
 
 /* HCI device flags */
@@ -104,24 +148,34 @@ enum {
 	HCI_RESET,
 };
 
+/* BR/EDR and/or LE controller flags: the flags defined here should represent
+ * states configured via debugfs for debugging and testing purposes only.
+ */
+enum {
+	HCI_DUT_MODE,
+	HCI_FORCE_SC,
+	HCI_FORCE_STATIC_ADDR,
+};
+
 /*
  * BR/EDR and/or LE controller flags: the flags defined here should represent
  * states from the controller.
  */
 enum {
 	HCI_SETUP,
+	HCI_CONFIG,
 	HCI_AUTO_OFF,
 	HCI_RFKILLED,
 	HCI_MGMT,
 	HCI_PAIRABLE,
 	HCI_SERVICE_CACHE,
-	HCI_DEBUG_KEYS,
-	HCI_DUT_MODE,
-	HCI_FORCE_SC,
-	HCI_FORCE_STATIC_ADDR,
+	HCI_KEEP_DEBUG_KEYS,
+	HCI_USE_DEBUG_KEYS,
 	HCI_UNREGISTER,
+	HCI_UNCONFIGURED,
 	HCI_USER_CHANNEL,
-
+	HCI_EXT_CONFIGURED,
+	HCI_LE_ADV,
 	HCI_LE_SCAN,
 	HCI_SSP_ENABLED,
 	HCI_SC_ENABLED,
@@ -139,7 +193,6 @@ enum {
 	HCI_PERIODIC_INQ,
 	HCI_FAST_CONNECTABLE,
 	HCI_BREDR_ENABLED,
-	HCI_6LOWPAN_ENABLED,
 	HCI_LE_SCAN_INTERRUPTED,
 };
 
@@ -147,7 +200,7 @@ enum {
  * or the HCI device is closed.
  */
 #define HCI_PERSISTENT_MASK (BIT(HCI_LE_SCAN) | BIT(HCI_PERIODIC_INQ) | \
-			      BIT(HCI_FAST_CONNECTABLE))
+			      BIT(HCI_FAST_CONNECTABLE) | BIT(HCI_LE_ADV))
 
 /* HCI ioctl defines */
 #define HCIDEVUP	_IOW('H', 201, int)
@@ -185,6 +238,7 @@ enum {
 #define HCI_AUTO_OFF_TIMEOUT	msecs_to_jiffies(2000)	/* 2 seconds */
 #define HCI_POWER_OFF_TIMEOUT	msecs_to_jiffies(5000)	/* 5 seconds */
 #define HCI_LE_CONN_TIMEOUT	msecs_to_jiffies(20000)	/* 20 seconds */
+#define HCI_LE_AUTOCONN_TIMEOUT	msecs_to_jiffies(2000)	/* 2 seconds */
 
 /* HCI data types */
 #define HCI_COMMAND_PKT		0x01
@@ -301,6 +355,10 @@ enum {
 #define LMP_HOST_LE_BREDR	0x04
 #define LMP_HOST_SC		0x08
 
+/* LE features */
+#define HCI_LE_CONN_PARAM_REQ_PROC	0x02
+#define HCI_LE_PING			0x10
+
 /* Connection modes */
 #define HCI_CM_ACTIVE	0x0000
 #define HCI_CM_HOLD	0x0001
@@ -347,17 +405,9 @@ enum {
 #define HCI_LK_CHANGED_COMBINATION	0x06
 #define HCI_LK_UNAUTH_COMBINATION_P256	0x07
 #define HCI_LK_AUTH_COMBINATION_P256	0x08
-/* The spec doesn't define types for SMP keys, the _MASTER suffix is implied */
-#define HCI_SMP_STK			0x80
-#define HCI_SMP_STK_SLAVE		0x81
-#define HCI_SMP_LTK			0x82
-#define HCI_SMP_LTK_SLAVE		0x83
-
-/* Long Term Key types */
-#define HCI_LTK_UNAUTH			0x00
-#define HCI_LTK_AUTH			0x01
 
 /* ---- HCI Error Codes ---- */
+#define HCI_ERROR_UNKNOWN_CONN_ID	0x02
 #define HCI_ERROR_AUTH_FAILURE		0x05
 #define HCI_ERROR_MEMORY_EXCEEDED	0x07
 #define HCI_ERROR_CONNECTION_TIMEOUT	0x08
@@ -367,6 +417,7 @@ enum {
 #define HCI_ERROR_REMOTE_POWER_OFF	0x15
 #define HCI_ERROR_LOCAL_HOST_TERM	0x16
 #define HCI_ERROR_PAIRING_NOT_ALLOWED	0x18
+#define HCI_ERROR_INVALID_LL_PARAMS	0x1E
 #define HCI_ERROR_ADVERTISING_TIMEOUT	0x3c
 
 /* Flow control modes */
@@ -536,6 +587,11 @@ struct hci_cp_read_remote_version {
 	__le16   handle;
 } __packed;
 
+#define HCI_OP_READ_CLOCK_OFFSET	0x041f
+struct hci_cp_read_clock_offset {
+	__le16   handle;
+} __packed;
+
 #define HCI_OP_SETUP_SYNC_CONN		0x0428
 struct hci_cp_setup_sync_conn {
 	__le16   handle;
@@ -1085,6 +1141,18 @@ struct hci_rp_read_rssi {
 	__s8     rssi;
 } __packed;
 
+#define HCI_OP_READ_CLOCK		0x1407
+struct hci_cp_read_clock {
+	__le16   handle;
+	__u8     which;
+} __packed;
+struct hci_rp_read_clock {
+	__u8     status;
+	__le16   handle;
+	__le32   clock;
+	__le16   accuracy;
+} __packed;
+
 #define HCI_OP_READ_LOCAL_AMP_INFO	0x1409
 struct hci_rp_read_local_amp_info {
 	__u8     status;
@@ -1291,6 +1359,23 @@ struct hci_rp_le_read_supported_states {
 	__u8	le_states[8];
 } __packed;
 
+#define HCI_OP_LE_CONN_PARAM_REQ_REPLY	0x2020
+struct hci_cp_le_conn_param_req_reply {
+	__le16	handle;
+	__le16	interval_min;
+	__le16	interval_max;
+	__le16	latency;
+	__le16	timeout;
+	__le16	min_ce_len;
+	__le16	max_ce_len;
+} __packed;
+
+#define HCI_OP_LE_CONN_PARAM_REQ_NEG_REPLY	0x2021
+struct hci_cp_le_conn_param_req_neg_reply {
+	__le16	handle;
+	__u8	reason;
+} __packed;
+
 /* ---- HCI Events ---- */
 #define HCI_EV_INQUIRY_COMPLETE		0x01
 
@@ -1670,6 +1755,15 @@ struct hci_ev_le_conn_complete {
 	__u8     clk_accurancy;
 } __packed;
 
+#define HCI_EV_LE_CONN_UPDATE_COMPLETE	0x03
+struct hci_ev_le_conn_update_complete {
+	__u8     status;
+	__le16   handle;
+	__le16   interval;
+	__le16   latency;
+	__le16   supervision_timeout;
+} __packed;
+
 #define HCI_EV_LE_LTK_REQ		0x05
 struct hci_ev_le_ltk_req {
 	__le16	handle;
@@ -1677,6 +1771,15 @@ struct hci_ev_le_ltk_req {
 	__le16	ediv;
 } __packed;
 
+#define HCI_EV_LE_REMOTE_CONN_PARAM_REQ	0x06
+struct hci_ev_le_remote_conn_param_req {
+	__le16 handle;
+	__le16 interval_min;
+	__le16 interval_max;
+	__le16 latency;
+	__le16 timeout;
+} __packed;
+
 /* Advertising report event types */
 #define LE_ADV_IND		0x00
 #define LE_ADV_DIRECT_IND	0x01

include/net/bluetooth/l2cap.h

@@ -137,7 +137,6 @@ struct l2cap_conninfo {
 #define L2CAP_FC_L2CAP		0x02
 #define L2CAP_FC_CONNLESS	0x04
 #define L2CAP_FC_A2MP		0x08
-#define L2CAP_FC_6LOWPAN        0x3e /* reserved and temporary value */
 
 /* L2CAP Control Field bit masks */
 #define L2CAP_CTRL_SAR			0xC000
@@ -579,7 +578,7 @@ struct l2cap_chan {
 	struct list_head	global_l;
 
 	void			*data;
-	struct l2cap_ops	*ops;
+	const struct l2cap_ops	*ops;
 	struct mutex		lock;
 };
 
@@ -600,7 +599,12 @@ struct l2cap_ops {
 	void			(*set_shutdown) (struct l2cap_chan *chan);
 	long			(*get_sndtimeo) (struct l2cap_chan *chan);
 	struct sk_buff		*(*alloc_skb) (struct l2cap_chan *chan,
+					       unsigned long hdr_len,
 					       unsigned long len, int nb);
+	int			(*memcpy_fromiovec) (struct l2cap_chan *chan,
+						     unsigned char *kdata,
+						     struct iovec *iov,
+						     int len);
 };
 
 struct l2cap_conn {
@@ -856,6 +860,31 @@ static inline long l2cap_chan_no_get_sndtimeo(struct l2cap_chan *chan)
 	return 0;
 }
 
+static inline int l2cap_chan_no_memcpy_fromiovec(struct l2cap_chan *chan,
+						 unsigned char *kdata,
+						 struct iovec *iov,
+						 int len)
+{
+	/* Following is safe since for compiler definitions of kvec and
+	 * iovec are identical, yielding the same in-core layout and alignment
+	 */
+	struct kvec *vec = (struct kvec *)iov;
+
+	while (len > 0) {
+		if (vec->iov_len) {
+			int copy = min_t(unsigned int, len, vec->iov_len);
+			memcpy(kdata, vec->iov_base, copy);
+			len -= copy;
+			kdata += copy;
+			vec->iov_base += copy;
+			vec->iov_len -= copy;
+		}
+		vec++;
+	}
+
+	return 0;
+}
+
 extern bool disable_ertm;
 
 int l2cap_init_sockets(void);
@@ -872,8 +901,7 @@ struct l2cap_chan *l2cap_chan_create(void);
 void l2cap_chan_close(struct l2cap_chan *chan, int reason);
 int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
 		       bdaddr_t *dst, u8 dst_type);
-int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len,
-								u32 priority);
+int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len);
 void l2cap_chan_busy(struct l2cap_chan *chan, int busy);
 int l2cap_chan_check_security(struct l2cap_chan *chan);
 void l2cap_chan_set_defaults(struct l2cap_chan *chan);

include/net/bluetooth/mgmt.h

@@ -97,6 +97,7 @@ struct mgmt_rp_read_index_list {
 #define MGMT_SETTING_SECURE_CONN	0x00000800
 #define MGMT_SETTING_DEBUG_KEYS		0x00001000
 #define MGMT_SETTING_PRIVACY		0x00002000
+#define MGMT_SETTING_CONFIGURATION	0x00004000
 
 #define MGMT_OP_READ_INFO		0x0004
 #define MGMT_READ_INFO_SIZE		0
@@ -424,6 +425,76 @@ struct mgmt_rp_get_conn_info {
 	__s8	max_tx_power;
 } __packed;
 
+#define MGMT_OP_GET_CLOCK_INFO		0x0032
+struct mgmt_cp_get_clock_info {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_GET_CLOCK_INFO_SIZE	MGMT_ADDR_INFO_SIZE
+struct mgmt_rp_get_clock_info {
+	struct mgmt_addr_info addr;
+	__le32  local_clock;
+	__le32  piconet_clock;
+	__le16  accuracy;
+} __packed;
+
+#define MGMT_OP_ADD_DEVICE		0x0033
+struct mgmt_cp_add_device {
+	struct mgmt_addr_info addr;
+	__u8	action;
+} __packed;
+#define MGMT_ADD_DEVICE_SIZE		(MGMT_ADDR_INFO_SIZE + 1)
+
+#define MGMT_OP_REMOVE_DEVICE		0x0034
+struct mgmt_cp_remove_device {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_REMOVE_DEVICE_SIZE		MGMT_ADDR_INFO_SIZE
+
+struct mgmt_conn_param {
+	struct mgmt_addr_info addr;
+	__le16 min_interval;
+	__le16 max_interval;
+	__le16 latency;
+	__le16 timeout;
+} __packed;
+
+#define MGMT_OP_LOAD_CONN_PARAM		0x0035
+struct mgmt_cp_load_conn_param {
+	__le16 param_count;
+	struct mgmt_conn_param params[0];
+} __packed;
+#define MGMT_LOAD_CONN_PARAM_SIZE	2
+
+#define MGMT_OP_READ_UNCONF_INDEX_LIST	0x0036
+#define MGMT_READ_UNCONF_INDEX_LIST_SIZE 0
+struct mgmt_rp_read_unconf_index_list {
+	__le16	num_controllers;
+	__le16	index[0];
+} __packed;
+
+#define MGMT_OPTION_EXTERNAL_CONFIG	0x00000001
+#define MGMT_OPTION_PUBLIC_ADDRESS	0x00000002
+
+#define MGMT_OP_READ_CONFIG_INFO	0x0037
+#define MGMT_READ_CONFIG_INFO_SIZE	0
+struct mgmt_rp_read_config_info {
+	__le16	manufacturer;
+	__le32	supported_options;
+	__le32	missing_options;
+} __packed;
+
+#define MGMT_OP_SET_EXTERNAL_CONFIG	0x0038
+struct mgmt_cp_set_external_config {
+	__u8 config;
+} __packed;
+#define MGMT_SET_EXTERNAL_CONFIG_SIZE	1
+
+#define MGMT_OP_SET_PUBLIC_ADDRESS	0x0039
+struct mgmt_cp_set_public_address {
+	bdaddr_t bdaddr;
+} __packed;
+#define MGMT_SET_PUBLIC_ADDRESS_SIZE	6
+
 #define MGMT_EV_CMD_COMPLETE		0x0001
 struct mgmt_ev_cmd_complete {
 	__le16	opcode;
@@ -522,6 +593,7 @@ struct mgmt_ev_auth_failed {
 
 #define MGMT_DEV_FOUND_CONFIRM_NAME    0x01
 #define MGMT_DEV_FOUND_LEGACY_PAIRING  0x02
+#define MGMT_DEV_FOUND_NOT_CONNECTABLE 0x04
 
 #define MGMT_EV_DEVICE_FOUND		0x0012
 struct mgmt_ev_device_found {
@@ -578,3 +650,30 @@ struct mgmt_ev_new_csrk {
 	__u8 store_hint;
 	struct mgmt_csrk_info key;
 } __packed;
+
+#define MGMT_EV_DEVICE_ADDED		0x001a
+struct mgmt_ev_device_added {
+	struct mgmt_addr_info addr;
+	__u8 action;
+} __packed;
+
+#define MGMT_EV_DEVICE_REMOVED		0x001b
+struct mgmt_ev_device_removed {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_EV_NEW_CONN_PARAM		0x001c
+struct mgmt_ev_new_conn_param {
+	struct mgmt_addr_info addr;
+	__u8 store_hint;
+	__le16 min_interval;
+	__le16 max_interval;
+	__le16 latency;
+	__le16 timeout;
+} __packed;
+
+#define MGMT_EV_UNCONF_INDEX_ADDED	0x001d
+
+#define MGMT_EV_UNCONF_INDEX_REMOVED	0x001e
+
+#define MGMT_EV_NEW_CONFIG_OPTIONS	0x001f

net/bluetooth/6lowpan.h

-/*
-   Copyright (c) 2013 Intel Corp.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License version 2 and
-   only version 2 as published by the Free Software Foundation.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-*/
-
-#ifndef __6LOWPAN_H
-#define __6LOWPAN_H
-
-#include <linux/errno.h>
-#include <linux/skbuff.h>
-#include <net/bluetooth/l2cap.h>
-
-#if IS_ENABLED(CONFIG_BT_6LOWPAN)
-int bt_6lowpan_recv(struct l2cap_conn *conn, struct sk_buff *skb);
-int bt_6lowpan_add_conn(struct l2cap_conn *conn);
-int bt_6lowpan_del_conn(struct l2cap_conn *conn);
-int bt_6lowpan_init(void);
-void bt_6lowpan_cleanup(void);
-#else
-static int bt_6lowpan_recv(struct l2cap_conn *conn, struct sk_buff *skb)
-{
-	return -EOPNOTSUPP;
-}
-static int bt_6lowpan_add_conn(struct l2cap_conn *conn)
-{
-	return -EOPNOTSUPP;
-}
-int bt_6lowpan_del_conn(struct l2cap_conn *conn)
-{
-	return -EOPNOTSUPP;
-}
-static int bt_6lowpan_init(void)
-{
-	return -EOPNOTSUPP;
-}
-static void bt_6lowpan_cleanup(void) { }
-#endif
-
-#endif /* __6LOWPAN_H */

net/bluetooth/Kconfig

@@ -6,7 +6,6 @@ menuconfig BT
 	tristate "Bluetooth subsystem support"
 	depends on NET && !S390
 	depends on RFKILL || !RFKILL
-	select 6LOWPAN_IPHC if BT_6LOWPAN
 	select CRC16
 	select CRYPTO
 	select CRYPTO_BLKCIPHER
@@ -41,10 +40,11 @@ menuconfig BT
 	  more information, see <http://www.bluez.org/>.
 
 config BT_6LOWPAN
-	bool "Bluetooth 6LoWPAN support"
+	tristate "Bluetooth 6LoWPAN support"
 	depends on BT && IPV6
+	select 6LOWPAN_IPHC if BT_6LOWPAN
 	help
-	  IPv6 compression over Bluetooth.
+	  IPv6 compression over Bluetooth Low Energy.
 
 source "net/bluetooth/rfcomm/Kconfig"
 

net/bluetooth/Makefile

@@ -7,10 +7,12 @@ obj-$(CONFIG_BT_RFCOMM)	+= rfcomm/
 obj-$(CONFIG_BT_BNEP)	+= bnep/
 obj-$(CONFIG_BT_CMTP)	+= cmtp/
 obj-$(CONFIG_BT_HIDP)	+= hidp/
+obj-$(CONFIG_BT_6LOWPAN) += bluetooth_6lowpan.o
+
+bluetooth_6lowpan-y := 6lowpan.o
 
 bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \
 	hci_sock.o hci_sysfs.o l2cap_core.o l2cap_sock.o smp.o sco.o lib.o \
 	a2mp.o amp.o
-bluetooth-$(CONFIG_BT_6LOWPAN) += 6lowpan.o
 
 subdir-ccflags-y += -D__CHECK_ENDIAN__

net/bluetooth/a2mp.c

@@ -63,7 +63,7 @@ void a2mp_send(struct amp_mgr *mgr, u8 code, u8 ident, u16 len, void *data)
 	msg.msg_iov = (struct iovec *) &iv;
 	msg.msg_iovlen = 1;
 
-	l2cap_chan_send(chan, &msg, total_len, 0);
+	l2cap_chan_send(chan, &msg, total_len);
 
 	kfree(cmd);
 }
@@ -693,18 +693,19 @@ static void a2mp_chan_state_change_cb(struct l2cap_chan *chan, int state,
 }
 
 static struct sk_buff *a2mp_chan_alloc_skb_cb(struct l2cap_chan *chan,
+					      unsigned long hdr_len,
 					      unsigned long len, int nb)
 {
 	struct sk_buff *skb;
 
-	skb = bt_skb_alloc(len, GFP_KERNEL);
+	skb = bt_skb_alloc(hdr_len + len, GFP_KERNEL);
 	if (!skb)
 		return ERR_PTR(-ENOMEM);
 
 	return skb;
 }
 
-static struct l2cap_ops a2mp_chan_ops = {
+static const struct l2cap_ops a2mp_chan_ops = {
 	.name = "L2CAP A2MP channel",
 	.recv = a2mp_chan_recv_cb,
 	.close = a2mp_chan_close_cb,
@@ -719,6 +720,7 @@ static struct l2cap_ops a2mp_chan_ops = {
 	.resume = l2cap_chan_no_resume,
 	.set_shutdown = l2cap_chan_no_set_shutdown,
 	.get_sndtimeo = l2cap_chan_no_get_sndtimeo,
+	.memcpy_fromiovec = l2cap_chan_no_memcpy_fromiovec,
 };
 
 static struct l2cap_chan *a2mp_chan_open(struct l2cap_conn *conn, bool locked)

net/bluetooth/af_bluetooth.c

@@ -639,7 +639,7 @@ static int bt_seq_show(struct seq_file *seq, void *v)
 	return 0;
 }
 
-static struct seq_operations bt_seq_ops = {
+static const struct seq_operations bt_seq_ops = {
 	.start = bt_seq_start,
 	.next  = bt_seq_next,
 	.stop  = bt_seq_stop,

net/bluetooth/hci_sock.c

@@ -481,7 +481,7 @@ static int hci_sock_blacklist_add(struct hci_dev *hdev, void __user *arg)
 
 	hci_dev_lock(hdev);
 
-	err = hci_blacklist_add(hdev, &bdaddr, BDADDR_BREDR);
+	err = hci_bdaddr_list_add(&hdev->blacklist, &bdaddr, BDADDR_BREDR);
 
 	hci_dev_unlock(hdev);
 
@@ -498,7 +498,7 @@ static int hci_sock_blacklist_del(struct hci_dev *hdev, void __user *arg)
 
 	hci_dev_lock(hdev);
 
-	err = hci_blacklist_del(hdev, &bdaddr, BDADDR_BREDR);
+	err = hci_bdaddr_list_del(&hdev->blacklist, &bdaddr, BDADDR_BREDR);
 
 	hci_dev_unlock(hdev);
 
@@ -517,6 +517,9 @@ static int hci_sock_bound_ioctl(struct sock *sk, unsigned int cmd,
 	if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags))
 		return -EBUSY;
 
+	if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags))
+		return -EOPNOTSUPP;
+
 	if (hdev->dev_type != HCI_BREDR)
 		return -EOPNOTSUPP;
 
@@ -690,7 +693,8 @@ static int hci_sock_bind(struct socket *sock, struct sockaddr *addr,
 
 		if (test_bit(HCI_UP, &hdev->flags) ||
 		    test_bit(HCI_INIT, &hdev->flags) ||
-		    test_bit(HCI_SETUP, &hdev->dev_flags)) {
+		    test_bit(HCI_SETUP, &hdev->dev_flags) ||
+		    test_bit(HCI_CONFIG, &hdev->dev_flags)) {
 			err = -EBUSY;
 			hci_dev_put(hdev);
 			goto done;
@@ -960,7 +964,7 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 			goto drop;
 		}
 
-		if (test_bit(HCI_RAW, &hdev->flags) || (ogf == 0x3f)) {
+		if (ogf == 0x3f) {
 			skb_queue_tail(&hdev->raw_q, skb);
 			queue_work(hdev->workqueue, &hdev->tx_work);
 		} else {

net/bluetooth/l2cap_sock.c

@@ -361,7 +361,8 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr,
 	BT_DBG("sock %p, sk %p", sock, sk);
 
 	if (peer && sk->sk_state != BT_CONNECTED &&
-	    sk->sk_state != BT_CONNECT && sk->sk_state != BT_CONNECT2)
+	    sk->sk_state != BT_CONNECT && sk->sk_state != BT_CONNECT2 &&
+	    sk->sk_state != BT_CONFIG)
 		return -ENOTCONN;
 
 	memset(la, 0, sizeof(struct sockaddr_l2));
@@ -964,7 +965,7 @@ static int l2cap_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 		return err;
 
 	l2cap_chan_lock(chan);
-	err = l2cap_chan_send(chan, msg, len, sk->sk_priority);
+	err = l2cap_chan_send(chan, msg, len);
 	l2cap_chan_unlock(chan);
 
 	return err;
@@ -1292,6 +1293,7 @@ static void l2cap_sock_state_change_cb(struct l2cap_chan *chan, int state,
 }
 
 static struct sk_buff *l2cap_sock_alloc_skb_cb(struct l2cap_chan *chan,
+					       unsigned long hdr_len,
 					       unsigned long len, int nb)
 {
 	struct sock *sk = chan->data;
@@ -1299,17 +1301,26 @@ static struct sk_buff *l2cap_sock_alloc_skb_cb(struct l2cap_chan *chan,
 	int err;
 
 	l2cap_chan_unlock(chan);
-	skb = bt_skb_send_alloc(sk, len, nb, &err);
+	skb = bt_skb_send_alloc(sk, hdr_len + len, nb, &err);
 	l2cap_chan_lock(chan);
 
 	if (!skb)
 		return ERR_PTR(err);
 
+	skb->priority = sk->sk_priority;
+
 	bt_cb(skb)->chan = chan;
 
 	return skb;
 }
 
+static int l2cap_sock_memcpy_fromiovec_cb(struct l2cap_chan *chan,
+					  unsigned char *kdata,
+					  struct iovec *iov, int len)
+{
+	return memcpy_fromiovec(kdata, iov, len);
+}
+
 static void l2cap_sock_ready_cb(struct l2cap_chan *chan)
 {
 	struct sock *sk = chan->data;
@@ -1375,7 +1386,7 @@ static void l2cap_sock_suspend_cb(struct l2cap_chan *chan)
 	sk->sk_state_change(sk);
 }
 
-static struct l2cap_ops l2cap_chan_ops = {
+static const struct l2cap_ops l2cap_chan_ops = {
 	.name			= "L2CAP Socket Interface",
 	.new_connection		= l2cap_sock_new_connection_cb,
 	.recv			= l2cap_sock_recv_cb,
@@ -1389,6 +1400,7 @@ static struct l2cap_ops l2cap_chan_ops = {
 	.set_shutdown		= l2cap_sock_set_shutdown_cb,
 	.get_sndtimeo		= l2cap_sock_get_sndtimeo_cb,
 	.alloc_skb		= l2cap_sock_alloc_skb_cb,
+	.memcpy_fromiovec	= l2cap_sock_memcpy_fromiovec_cb,
 };
 
 static void l2cap_sock_destruct(struct sock *sk)

net/bluetooth/smp.h

@@ -116,6 +116,13 @@ struct smp_cmd_security_req {
 #define SMP_MIN_ENC_KEY_SIZE		7
 #define SMP_MAX_ENC_KEY_SIZE		16
 
+/* LTK types used in internal storage (struct smp_ltk) */
+enum {
+	SMP_STK,
+	SMP_LTK,
+	SMP_LTK_SLAVE,
+};
+
 /* SMP Commands */
 bool smp_sufficient_security(struct hci_conn *hcon, u8 sec_level);
 int smp_conn_security(struct hci_conn *hcon, __u8 sec_level);

net/mac80211/util.c

@@ -1150,11 +1150,12 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
 	int err;
 
 	/* 24 + 6 = header + auth_algo + auth_transaction + status_code */
-	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len);
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN +
+			    24 + 6 + extra_len + IEEE80211_WEP_ICV_LEN);
 	if (!skb)
 		return;
 
-	skb_reserve(skb, local->hw.extra_tx_headroom);
+	skb_reserve(skb, local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN);
 
 	mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6);
 	memset(mgmt, 0, 24 + 6);

net/wireless/core.h

@@ -424,7 +424,7 @@ static inline unsigned int elapsed_jiffies_msecs(unsigned long start)
 	if (end >= start)
 		return jiffies_to_msecs(end - start);
 
-	return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1);
+	return jiffies_to_msecs(end + (ULONG_MAX - start) + 1);
 }
 
 void

net/wireless/nl80211.c

@@ -1498,18 +1498,17 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		}
 		CMD(start_p2p_device, START_P2P_DEVICE);
 		CMD(set_mcast_rate, SET_MCAST_RATE);
+#ifdef CONFIG_NL80211_TESTMODE
+		CMD(testmode_cmd, TESTMODE);
+#endif
 		if (state->split) {
 			CMD(crit_proto_start, CRIT_PROTOCOL_START);
 			CMD(crit_proto_stop, CRIT_PROTOCOL_STOP);
 			if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)
 				CMD(channel_switch, CHANNEL_SWITCH);
-		}
 			CMD(set_qos_map, SET_QOS_MAP);
-
-#ifdef CONFIG_NL80211_TESTMODE
-		CMD(testmode_cmd, TESTMODE);
-#endif
-
+		}
+		/* add into the if now */
 #undef CMD
 
 		if (rdev->ops->connect || rdev->ops->auth) {

net/wireless/reg.c

@@ -935,7 +935,7 @@ freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq,
 		if (!band_rule_found)
 			band_rule_found = freq_in_rule_band(fr, center_freq);
 
-		bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5));
+		bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20));
 
 		if (band_rule_found && bw_fits)
 			return rr;
@@ -1019,10 +1019,10 @@ static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
 }
 #endif
 
-/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency
- * chan->center_freq fits there.
- * If there is no such reg_rule, disable the channel, otherwise set the
- * flags corresponding to the bandwidths allowed in the particular reg_rule
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel).
  */
 static void handle_channel(struct wiphy *wiphy,
 			   enum nl80211_reg_initiator initiator,
@@ -1083,12 +1083,8 @@ static void handle_channel(struct wiphy *wiphy,
 	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
 		max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
-	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-		bw_flags = IEEE80211_CHAN_NO_10MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-		bw_flags |= IEEE80211_CHAN_NO_HT40;
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
 		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(160))
@@ -1522,12 +1518,8 @@ static void handle_channel_custom(struct wiphy *wiphy,
 	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
 		max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
-	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-		bw_flags = IEEE80211_CHAN_NO_10MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-		bw_flags |= IEEE80211_CHAN_NO_HT40;
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
 		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(160))