Commit 66762373 authored by Steven Toth's avatar Steven Toth Committed by Mauro Carvalho Chehab

V4L/DVB (7673): cx23885: Add support for the Hauppauge HVR1400

DVB-T mode is now supported using the DiBcom dib7000p demodulator
and the Xceive xc3028L silicon tuner. Analog mode is not supported.
Signed-off-by: default avatarSteven Toth <stoth@hauppauge.com>
Reviewed-by: default avatarPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent a38d6e37
...@@ -7,3 +7,4 @@ ...@@ -7,3 +7,4 @@
6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717] 6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717]
7 -> Hauppauge WinTV-HVR1200 [0070:71d1] 7 -> Hauppauge WinTV-HVR1200 [0070:71d1]
8 -> Hauppauge WinTV-HVR1700 [0070:8101] 8 -> Hauppauge WinTV-HVR1700 [0070:8101]
9 -> Hauppauge WinTV-HVR1400 [0070:8010]
...@@ -138,6 +138,10 @@ struct cx23885_board cx23885_boards[] = { ...@@ -138,6 +138,10 @@ struct cx23885_board cx23885_boards[] = {
.name = "Hauppauge WinTV-HVR1700", .name = "Hauppauge WinTV-HVR1700",
.portc = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB,
}, },
[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
.name = "Hauppauge WinTV-HVR1400",
.portc = CX23885_MPEG_DVB,
},
}; };
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
...@@ -197,6 +201,10 @@ struct cx23885_subid cx23885_subids[] = { ...@@ -197,6 +201,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x0070, .subvendor = 0x0070,
.subdevice = 0x8101, .subdevice = 0x8101,
.card = CX23885_BOARD_HAUPPAUGE_HVR1700, .card = CX23885_BOARD_HAUPPAUGE_HVR1700,
}, {
.subvendor = 0x0070,
.subdevice = 0x8010,
.card = CX23885_BOARD_HAUPPAUGE_HVR1400,
}, },
}; };
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
...@@ -251,6 +259,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) ...@@ -251,6 +259,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */ case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
case 80019:
/* WinTV-HVR1400 (Express Card, Retail, IR,
* DVB-T and Basic analog */
case 81519: case 81519:
/* WinTV-HVR1700 (PCIe, Retail, No IR, half height, /* WinTV-HVR1700 (PCIe, Retail, No IR, half height,
* DVB-T and MPEG2 HW Encoder */ * DVB-T and MPEG2 HW Encoder */
...@@ -358,6 +369,18 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) ...@@ -358,6 +369,18 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
/* GPIO-22 IIS WCLK */ /* GPIO-22 IIS WCLK */
/* GPIO-23 IIS BCLK */ /* GPIO-23 IIS BCLK */
/* Put the parts into reset and back */
cx_set(GP0_IO, 0x00050000);
mdelay(20);
cx_clear(GP0_IO, 0x00000005);
mdelay(20);
cx_set(GP0_IO, 0x00050005);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1400:
/* GPIO-0 Dibcom7000p demodulator reset */
/* GPIO-2 xc3028L tuner reset */
/* GPIO-13 LED */
/* Put the parts into reset and back */ /* Put the parts into reset and back */
cx_set(GP0_IO, 0x00050000); cx_set(GP0_IO, 0x00050000);
mdelay(20); mdelay(20);
...@@ -376,6 +399,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) ...@@ -376,6 +399,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
/* FIXME: Implement me */ /* FIXME: Implement me */
break; break;
} }
...@@ -400,6 +424,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ...@@ -400,6 +424,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
if (dev->i2c_bus[0].i2c_rc == 0) if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0x80); hauppauge_eeprom(dev, eeprom+0x80);
break; break;
...@@ -425,6 +450,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ...@@ -425,6 +450,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
default: default:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
......
...@@ -40,6 +40,8 @@ ...@@ -40,6 +40,8 @@
#include "dvb-pll.h" #include "dvb-pll.h"
#include "tuner-xc2028.h" #include "tuner-xc2028.h"
#include "tuner-simple.h" #include "tuner-simple.h"
#include "dib7000p.h"
#include "dibx000_common.h"
static unsigned int debug; static unsigned int debug;
...@@ -189,6 +191,92 @@ static struct tda18271_config hauppauge_hvr1200_tuner_config = { ...@@ -189,6 +191,92 @@ static struct tda18271_config hauppauge_hvr1200_tuner_config = {
.gate = TDA18271_GATE_ANALOG, .gate = TDA18271_GATE_ANALOG,
}; };
struct dibx000_agc_config xc3028_agc_config = {
BAND_VHF | BAND_UHF, /* band_caps */
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
* P_agc_nb_est=2, P_agc_write=0
*/
(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
712, /* inv_gain */
21, /* time_stabiliz */
0, /* alpha_level */
118, /* thlock */
0, /* wbd_inv */
2867, /* wbd_ref */
0, /* wbd_sel */
2, /* wbd_alpha */
0, /* agc1_max */
0, /* agc1_min */
39718, /* agc2_max */
9930, /* agc2_min */
0, /* agc1_pt1 */
0, /* agc1_pt2 */
0, /* agc1_pt3 */
0, /* agc1_slope1 */
0, /* agc1_slope2 */
0, /* agc2_pt1 */
128, /* agc2_pt2 */
29, /* agc2_slope1 */
29, /* agc2_slope2 */
17, /* alpha_mant */
27, /* alpha_exp */
23, /* beta_mant */
51, /* beta_exp */
1, /* perform_agc_softsplit */
};
/* PLL Configuration for COFDM BW_MHz = 8.000000
* With external clock = 30.000000 */
struct dibx000_bandwidth_config xc3028_bw_config = {
60000, /* internal */
30000, /* sampling */
1, /* pll_cfg: prediv */
8, /* pll_cfg: ratio */
3, /* pll_cfg: range */
1, /* pll_cfg: reset */
0, /* pll_cfg: bypass */
0, /* misc: refdiv */
0, /* misc: bypclk_div */
1, /* misc: IO_CLK_en_core */
1, /* misc: ADClkSrc */
0, /* misc: modulo */
(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
20452225, /* timf */
30000000 /* xtal_hz */
};
static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
.output_mpeg2_in_188_bytes = 1,
.hostbus_diversity = 1,
.tuner_is_baseband = 0,
.update_lna = NULL,
.agc_config_count = 1,
.agc = &xc3028_agc_config,
.bw = &xc3028_bw_config,
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
.pwm_freq_div = 0,
.agc_control = NULL,
.spur_protect = 0,
.output_mode = OUTMODE_MPEG2_SERIAL,
};
static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
{ {
struct cx23885_tsport *port = ptr; struct cx23885_tsport *port = ptr;
...@@ -343,6 +431,31 @@ static int dvb_register(struct cx23885_tsport *port) ...@@ -343,6 +431,31 @@ static int dvb_register(struct cx23885_tsport *port)
&hauppauge_hvr1200_tuner_config); &hauppauge_hvr1200_tuner_config);
} }
break; break;
case CX23885_BOARD_HAUPPAUGE_HVR1400:
i2c_bus = &dev->i2c_bus[0];
port->dvb.frontend = dvb_attach(dib7000p_attach,
&i2c_bus->i2c_adap,
0x12, &hauppauge_hvr1400_dib7000_config);
if (port->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &dev->i2c_bus[1].i2c_adap,
.i2c_addr = 0x64,
.callback = cx23885_hvr1500_xc3028_callback,
};
static struct xc2028_ctrl ctl = {
.fname = "xc3028L-v36.fw",
.max_len = 64,
.demod = 5000,
.d2633 = 1
};
fe = dvb_attach(xc2028_attach,
port->dvb.frontend, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
default: default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name); dev->name);
......
...@@ -354,6 +354,7 @@ static struct i2c_client cx23885_i2c_client_template = { ...@@ -354,6 +354,7 @@ static struct i2c_client cx23885_i2c_client_template = {
static char *i2c_devs[128] = { static char *i2c_devs[128] = {
[0x10 >> 1] = "tda10048", [0x10 >> 1] = "tda10048",
[0x12 >> 1] = "dib7000pc",
[ 0x1c >> 1 ] = "lgdt3303", [ 0x1c >> 1 ] = "lgdt3303",
[ 0x86 >> 1 ] = "tda9887", [ 0x86 >> 1 ] = "tda9887",
[ 0x32 >> 1 ] = "cx24227", [ 0x32 >> 1 ] = "cx24227",
...@@ -361,7 +362,8 @@ static char *i2c_devs[128] = { ...@@ -361,7 +362,8 @@ static char *i2c_devs[128] = {
[ 0x84 >> 1 ] = "tda8295", [ 0x84 >> 1 ] = "tda8295",
[ 0xa0 >> 1 ] = "eeprom", [ 0xa0 >> 1 ] = "eeprom",
[ 0xc0 >> 1 ] = "tuner/mt2131/tda8275", [ 0xc0 >> 1 ] = "tuner/mt2131/tda8275",
[ 0xc2 >> 1 ] = "tuner/mt2131/tda8275/xc5000", [0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028",
[0xc8 >> 1] = "tuner/xc3028L",
}; };
static void do_i2c_scan(char *name, struct i2c_client *c) static void do_i2c_scan(char *name, struct i2c_client *c)
......
...@@ -61,6 +61,7 @@ ...@@ -61,6 +61,7 @@
#define CX23885_BOARD_HAUPPAUGE_HVR1500 6 #define CX23885_BOARD_HAUPPAUGE_HVR1500 6
#define CX23885_BOARD_HAUPPAUGE_HVR1200 7 #define CX23885_BOARD_HAUPPAUGE_HVR1200 7
#define CX23885_BOARD_HAUPPAUGE_HVR1700 8 #define CX23885_BOARD_HAUPPAUGE_HVR1700 8
#define CX23885_BOARD_HAUPPAUGE_HVR1400 9
/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
#define CX23885_NORMS (\ #define CX23885_NORMS (\
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment