Merge tag 'hwmon-for-linus-v4.4' of...

Merge tag 'hwmon-for-linus-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New driver for MAX31790, added support for TMP75C, as well as cleanups
  and minor improvements in various drivers"

* tag 'hwmon-for-linus-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (fam15h_power) Add max compute unit accumulated power
  hwmon: (fam15h_power) Enable power1_input on AMD Carrizo
  hwmon: (fam15h_power) Refactor attributes for dynamically added
  hwmon: (ina2xx) remove no longer used variable 'kind'
  hwmon: (nct6775) Introduce separate temperature labels for NCT6792 and NCT6793
  hwmon: (nct6775) NCT6791D and NCT6792D have an additional temperature source
  hwmon: (ina2xx) give precedence to DT over checking for platform data.
  hwmon: (ina2xx) convert driver to using regmap
  hwmon: (coretemp) Increase limit of maximum core ID from 32 to 128.
  hwmon: (lm75) Add support for TMP75C
  hwmon: (ibmpowernv) Add OF compatibility table entry
  hwmon: (abx500) drop the use of IRQF_NO_SUSPEND
  hwmon: (max31790) Fix dereference of ERR_PTR
  hwmon: Driver for Maxim MAX31790

Documentation/hwmon/lm75

@@ -42,8 +42,8 @@ Supported chips:
     Addresses scanned: none
     Datasheet: Publicly available at the ST website
                http://www.st.com/internet/analog/product/121769.jsp
-  * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP175, TMP275
-    Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp275'
+  * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75C, TMP175, TMP275
+    Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75c', 'tmp275'
     Addresses scanned: none
     Datasheet: Publicly available at the Texas Instruments website
                http://www.ti.com/product/tmp100
@@ -51,6 +51,7 @@ Supported chips:
                http://www.ti.com/product/tmp105
                http://www.ti.com/product/tmp112
                http://www.ti.com/product/tmp75
+               http://www.ti.com/product/tmp75c
                http://www.ti.com/product/tmp175
                http://www.ti.com/product/tmp275
   * NXP LM75B

Documentation/hwmon/max31790

+Kernel driver max31790
+======================
+
+Supported chips:
+  * Maxim MAX31790
+    Prefix: 'max31790'
+    Addresses scanned: -
+    Datasheet: http://pdfserv.maximintegrated.com/en/ds/MAX31790.pdf
+
+Author: Il Han <corone.il.han@gmail.com>
+
+
+Description
+-----------
+
+This driver implements support for the Maxim MAX31790 chip.
+
+The MAX31790 controls the speeds of up to six fans using six independent
+PWM outputs. The desired fan speeds (or PWM duty cycles) are written
+through the I2C interface. The outputs drive "4-wire" fans directly,
+or can be used to modulate the fan's power terminals using an external
+pass transistor.
+
+Tachometer inputs monitor fan tachometer logic outputs for precise (+/-1%)
+monitoring and control of fan RPM as well as detection of fan failure.
+Six pins are dedicated tachometer inputs. Any of the six PWM outputs can
+also be configured to serve as tachometer inputs.
+
+
+Sysfs entries
+-------------
+
+fan[1-12]_input    RO  fan tachometer speed in RPM
+fan[1-12]_fault    RO  fan experienced fault
+fan[1-6]_target    RW  desired fan speed in RPM
+pwm[1-6]_enable    RW  regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
+pwm[1-6]           RW  fan target duty cycle (0-255)

drivers/hwmon/Kconfig

@@ -840,6 +840,16 @@ config SENSORS_MAX6697
 	  This driver can also be built as a module.  If so, the module
 	  will be called max6697.
 
+config SENSORS_MAX31790
+	tristate "Maxim MAX31790 sensor chip"
+	depends on I2C
+	help
+	  If you say yes here you get support for 6-Channel PWM-Output
+	  Fan RPM Controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max31790.
+
 config SENSORS_HTU21
 	tristate "Measurement Specialties HTU21D humidity/temperature sensors"
 	depends on I2C

drivers/hwmon/Makefile

@@ -115,6 +115,7 @@ obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
 obj-$(CONFIG_SENSORS_MAX6642)	+= max6642.o
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_MAX6697)	+= max6697.o
+obj-$(CONFIG_SENSORS_MAX31790)	+= max31790.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
 obj-$(CONFIG_SENSORS_MCP3021)	+= mcp3021.o
 obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o

drivers/hwmon/abx500.c

@@ -377,7 +377,7 @@ static int setup_irqs(struct platform_device *pdev)
 	}
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-		abx500_temp_irq_handler, IRQF_NO_SUSPEND, "abx500-temp", pdev);
+		abx500_temp_irq_handler, 0, "abx500-temp", pdev);
 	if (ret < 0)
 		dev_err(&pdev->dev, "Request threaded irq failed (%d)\n", ret);
 

drivers/hwmon/coretemp.c

@@ -52,7 +52,7 @@ module_param_named(tjmax, force_tjmax, int, 0444);
 MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
 
 #define BASE_SYSFS_ATTR_NO	2	/* Sysfs Base attr no for coretemp */
-#define NUM_REAL_CORES		32	/* Number of Real cores per cpu */
+#define NUM_REAL_CORES		128	/* Number of Real cores per cpu */
 #define CORETEMP_NAME_LENGTH	19	/* String Length of attrs */
 #define MAX_CORE_ATTRS		4	/* Maximum no of basic attrs */
 #define TOTAL_ATTRS		(MAX_CORE_ATTRS + 1)

drivers/hwmon/fam15h_power.c

@@ -26,6 +26,7 @@
 #include <linux/pci.h>
 #include <linux/bitops.h>
 #include <asm/processor.h>
+#include <asm/msr.h>
 
 MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
 MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>");
@@ -41,12 +42,21 @@ MODULE_LICENSE("GPL");
 #define REG_TDP_RUNNING_AVERAGE		0xe0
 #define REG_TDP_LIMIT3			0xe8
 
+#define FAM15H_MIN_NUM_ATTRS		2
+#define FAM15H_NUM_GROUPS		2
+
+#define MSR_F15H_CU_MAX_PWR_ACCUMULATOR	0xc001007b
+
 struct fam15h_power_data {
 	struct pci_dev *pdev;
 	unsigned int tdp_to_watts;
 	unsigned int base_tdp;
 	unsigned int processor_pwr_watts;
 	unsigned int cpu_pwr_sample_ratio;
+	const struct attribute_group *groups[FAM15H_NUM_GROUPS];
+	struct attribute_group group;
+	/* maximum accumulated power of a compute unit */
+	u64 max_cu_acc_power;
 };
 
 static ssize_t show_power(struct device *dev,
@@ -105,29 +115,36 @@ static ssize_t show_power_crit(struct device *dev,
 }
 static DEVICE_ATTR(power1_crit, S_IRUGO, show_power_crit, NULL);
 
-static umode_t fam15h_power_is_visible(struct kobject *kobj,
-				       struct attribute *attr,
-				       int index)
+static int fam15h_power_init_attrs(struct pci_dev *pdev,
+				   struct fam15h_power_data *data)
 {
-	/* power1_input is only reported for Fam15h, Models 00h-0fh */
-	if (attr == &dev_attr_power1_input.attr &&
-	   (boot_cpu_data.x86 != 0x15 || boot_cpu_data.x86_model > 0xf))
-		return 0;
+	int n = FAM15H_MIN_NUM_ATTRS;
+	struct attribute **fam15h_power_attrs;
+	struct cpuinfo_x86 *c = &boot_cpu_data;
 
-	return attr->mode;
-}
+	if (c->x86 == 0x15 &&
+	    (c->x86_model <= 0xf ||
+	     (c->x86_model >= 0x60 && c->x86_model <= 0x6f)))
+		n += 1;
 
-static struct attribute *fam15h_power_attrs[] = {
-	&dev_attr_power1_input.attr,
-	&dev_attr_power1_crit.attr,
-	NULL
-};
+	fam15h_power_attrs = devm_kcalloc(&pdev->dev, n,
+					  sizeof(*fam15h_power_attrs),
+					  GFP_KERNEL);
 
-static const struct attribute_group fam15h_power_group = {
-	.attrs = fam15h_power_attrs,
-	.is_visible = fam15h_power_is_visible,
-};
-__ATTRIBUTE_GROUPS(fam15h_power);
+	if (!fam15h_power_attrs)
+		return -ENOMEM;
+
+	n = 0;
+	fam15h_power_attrs[n++] = &dev_attr_power1_crit.attr;
+	if (c->x86 == 0x15 &&
+	    (c->x86_model <= 0xf ||
+	     (c->x86_model >= 0x60 && c->x86_model <= 0x6f)))
+		fam15h_power_attrs[n++] = &dev_attr_power1_input.attr;
+
+	data->group.attrs = fam15h_power_attrs;
+
+	return 0;
+}
 
 static bool should_load_on_this_node(struct pci_dev *f4)
 {
@@ -186,11 +203,12 @@ static int fam15h_power_resume(struct pci_dev *pdev)
 #define fam15h_power_resume NULL
 #endif
 
-static void fam15h_power_init_data(struct pci_dev *f4,
+static int fam15h_power_init_data(struct pci_dev *f4,
 				  struct fam15h_power_data *data)
 {
 	u32 val, eax, ebx, ecx, edx;
 	u64 tmp;
+	int ret;
 
 	pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val);
 	data->base_tdp = val >> 16;
@@ -211,11 +229,15 @@ static void fam15h_power_init_data(struct pci_dev *f4,
 	/* convert to microWatt */
 	data->processor_pwr_watts = (tmp * 15625) >> 10;
 
+	ret = fam15h_power_init_attrs(f4, data);
+	if (ret)
+		return ret;
+
 	cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
 
 	/* CPUID Fn8000_0007:EDX[12] indicates to support accumulated power */
 	if (!(edx & BIT(12)))
-		return;
+		return 0;
 
 	/*
 	 * determine the ratio of the compute unit power accumulator
@@ -223,6 +245,15 @@ static void fam15h_power_init_data(struct pci_dev *f4,
 	 * Fn8000_0007:ECX
 	 */
 	data->cpu_pwr_sample_ratio = ecx;
+
+	if (rdmsrl_safe(MSR_F15H_CU_MAX_PWR_ACCUMULATOR, &tmp)) {
+		pr_err("Failed to read max compute unit power accumulator MSR\n");
+		return -ENODEV;
+	}
+
+	data->max_cu_acc_power = tmp;
+
+	return 0;
 }
 
 static int fam15h_power_probe(struct pci_dev *pdev,
@@ -231,6 +262,7 @@ static int fam15h_power_probe(struct pci_dev *pdev,
 	struct fam15h_power_data *data;
 	struct device *dev = &pdev->dev;
 	struct device *hwmon_dev;
+	int ret;
 
 	/*
 	 * though we ignore every other northbridge, we still have to
@@ -246,12 +278,17 @@ static int fam15h_power_probe(struct pci_dev *pdev,
 	if (!data)
 		return -ENOMEM;
 
-	fam15h_power_init_data(pdev, data);
+	ret = fam15h_power_init_data(pdev, data);
+	if (ret)
+		return ret;
+
 	data->pdev = pdev;
 
+	data->groups[0] = &data->group;
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, "fam15h_power",
 							   data,
-							   fam15h_power_groups);
+							   &data->groups[0]);
 	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 

drivers/hwmon/ibmpowernv.c

@@ -474,11 +474,18 @@ static const struct platform_device_id opal_sensor_driver_ids[] = {
 };
 MODULE_DEVICE_TABLE(platform, opal_sensor_driver_ids);
 
+static const struct of_device_id opal_sensor_match[] = {
+	{ .compatible	= "ibm,opal-sensor" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, opal_sensor_match);
+
 static struct platform_driver ibmpowernv_driver = {
 	.probe		= ibmpowernv_probe,
 	.id_table	= opal_sensor_driver_ids,
 	.driver		= {
 		.name	= DRVNAME,
+		.of_match_table	= opal_sensor_match,
 	},
 };
 

drivers/hwmon/lm75.c

@@ -57,6 +57,7 @@ enum lm75_type {		/* keep sorted in alphabetical order */
 	tmp175,
 	tmp275,
 	tmp75,
+	tmp75c,
 };
 
 /* Addresses scanned */
@@ -280,6 +281,11 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		data->resolution = 12;
 		data->sample_time = HZ / 2;
 		break;
+	case tmp75c:
+		clr_mask |= 1 << 5;		/* not one-shot mode */
+		data->resolution = 12;
+		data->sample_time = HZ / 4;
+		break;
 	}
 
 	/* configure as specified */
@@ -343,6 +349,7 @@ static const struct i2c_device_id lm75_ids[] = {
 	{ "tmp175", tmp175, },
 	{ "tmp275", tmp275, },
 	{ "tmp75", tmp75, },
+	{ "tmp75c", tmp75c, },
 	{ /* LIST END */ }
 };
 MODULE_DEVICE_TABLE(i2c, lm75_ids);

drivers/hwmon/nct6775.c

@@ -515,16 +515,24 @@ static const char *const nct6779_temp_label[] = {
 	"PCH_DIM1_TEMP",
 	"PCH_DIM2_TEMP",
 	"PCH_DIM3_TEMP",
-	"BYTE_TEMP"
+	"BYTE_TEMP",
+	"",
+	"",
+	"",
+	"",
+	"Virtual_TEMP"
 };
 
-static const u16 NCT6779_REG_TEMP_ALTERNATE[ARRAY_SIZE(nct6779_temp_label) - 1]
+#define NCT6779_NUM_LABELS	(ARRAY_SIZE(nct6779_temp_label) - 5)
+#define NCT6791_NUM_LABELS	ARRAY_SIZE(nct6779_temp_label)
+
+static const u16 NCT6779_REG_TEMP_ALTERNATE[NCT6791_NUM_LABELS - 1]
 	= { 0x490, 0x491, 0x492, 0x493, 0x494, 0x495, 0, 0,
 	    0, 0, 0, 0, 0, 0, 0, 0,
 	    0, 0x400, 0x401, 0x402, 0x404, 0x405, 0x406, 0x407,
 	    0x408, 0 };
 
-static const u16 NCT6779_REG_TEMP_CRIT[ARRAY_SIZE(nct6779_temp_label) - 1]
+static const u16 NCT6779_REG_TEMP_CRIT[NCT6791_NUM_LABELS - 1]
 	= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x709, 0x70a };
 
 /* NCT6791 specific data */
@@ -557,6 +565,76 @@ static const u16 NCT6792_REG_TEMP_MON[] = {
 static const u16 NCT6792_REG_BEEP[NUM_REG_BEEP] = {
 	0xb2, 0xb3, 0xb4, 0xb5, 0xbf };
 
+static const char *const nct6792_temp_label[] = {
+	"",
+	"SYSTIN",
+	"CPUTIN",
+	"AUXTIN0",
+	"AUXTIN1",
+	"AUXTIN2",
+	"AUXTIN3",
+	"",
+	"SMBUSMASTER 0",
+	"SMBUSMASTER 1",
+	"SMBUSMASTER 2",
+	"SMBUSMASTER 3",
+	"SMBUSMASTER 4",
+	"SMBUSMASTER 5",
+	"SMBUSMASTER 6",
+	"SMBUSMASTER 7",
+	"PECI Agent 0",
+	"PECI Agent 1",
+	"PCH_CHIP_CPU_MAX_TEMP",
+	"PCH_CHIP_TEMP",
+	"PCH_CPU_TEMP",
+	"PCH_MCH_TEMP",
+	"PCH_DIM0_TEMP",
+	"PCH_DIM1_TEMP",
+	"PCH_DIM2_TEMP",
+	"PCH_DIM3_TEMP",
+	"BYTE_TEMP",
+	"PECI Agent 0 Calibration",
+	"PECI Agent 1 Calibration",
+	"",
+	"",
+	"Virtual_TEMP"
+};
+
+static const char *const nct6793_temp_label[] = {
+	"",
+	"SYSTIN",
+	"CPUTIN",
+	"AUXTIN0",
+	"AUXTIN1",
+	"AUXTIN2",
+	"AUXTIN3",
+	"",
+	"SMBUSMASTER 0",
+	"SMBUSMASTER 1",
+	"",
+	"",
+	"",
+	"",
+	"",
+	"",
+	"PECI Agent 0",
+	"PECI Agent 1",
+	"PCH_CHIP_CPU_MAX_TEMP",
+	"PCH_CHIP_TEMP",
+	"PCH_CPU_TEMP",
+	"PCH_MCH_TEMP",
+	"Agent0 Dimm0 ",
+	"Agent0 Dimm1",
+	"Agent1 Dimm0",
+	"Agent1 Dimm1",
+	"BYTE_TEMP0",
+	"BYTE_TEMP1",
+	"PECI Agent 0 Calibration",
+	"PECI Agent 1 Calibration",
+	"",
+	"Virtual_TEMP"
+};
+
 /* NCT6102D/NCT6106D specific data */
 
 #define NCT6106_REG_VBAT	0x318
@@ -3605,7 +3683,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->speed_tolerance_limit = 63;
 
 		data->temp_label = nct6779_temp_label;
-		data->temp_label_num = ARRAY_SIZE(nct6779_temp_label);
+		data->temp_label_num = NCT6779_NUM_LABELS;
 
 		data->REG_CONFIG = NCT6775_REG_CONFIG;
 		data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3682,8 +3760,19 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->tolerance_mask = 0x07;
 		data->speed_tolerance_limit = 63;
 
+		switch (data->kind) {
+		default:
+		case nct6791:
 			data->temp_label = nct6779_temp_label;
-		data->temp_label_num = ARRAY_SIZE(nct6779_temp_label);
+			break;
+		case nct6792:
+			data->temp_label = nct6792_temp_label;
+			break;
+		case nct6793:
+			data->temp_label = nct6793_temp_label;
+			break;
+		}
+		data->temp_label_num = NCT6791_NUM_LABELS;
 
 		data->REG_CONFIG = NCT6775_REG_CONFIG;
 		data->REG_VBAT = NCT6775_REG_VBAT;